v5.1v0.5.1

5 files changed, 150 insertions, 2 deletions

diff --git a/PrusaSlicer/printer/AnyCubic Photon.ini b/PrusaSlicer/printer/AnyCubic Photon.ini
index 4a0fd0c..7086ad1 100644
--- a/PrusaSlicer/printer/AnyCubic Photon.ini
+++ b/PrusaSlicer/printer/AnyCubic Photon.ini
@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.2.0+win64 on 2020-06-12 at 00:45:10 UTC
+# generated by PrusaSlicer 2.2.0+win64 on 2020-06-16 at 03:20:05 UTC
 absolute_correction = 0
 area_fill = 50
 bed_custom_model = 
@@ -25,7 +25,7 @@ min_exposure_time = 1
 min_initial_exposure_time = 1
 print_host = 
 printer_model = SL1
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTON\n\nSTART_CUSTOM_VALUES\nFLIP_XY\nLayerOffTime_0\nBottomLiftHeight_5\nBottomLiftSpeed_40\nLiftHeight_5\nLiftSpeed_60\nRetractSpeed_150\nBottomLightOffDelay_2\nBottomLightPWM_255\nLightPWM_255\nAntiAliasing_4 ; Use 0 or 1 for disable AntiAliasing with "printer gamma correction" set to 0, otherwise use multiples of 2 and "gamma correction" set to 1 for enable\nEND_CUSTOM_VALUES
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTON\n\nSTART_CUSTOM_VALUES\nFLIP_XY\nLayerOffTime_0\nBottomLightOffDelay_2\nBottomLiftHeight_5\nLiftHeight_5\nBottomLiftSpeed_65\nLiftSpeed_65\nRetractSpeed_150\nBottomLightPWM_255\nLightPWM_255\nAntiAliasing_4 ; Use 0 or 1 for disable AntiAliasing with "printer gamma correction" set to 0, otherwise use multiples of 2 and "gamma correction" set to 1 for enable\nEND_CUSTOM_VALUES
 printer_settings_id = 
 printer_technology = SLA
 printer_variant = default
diff --git a/PrusaSlicer/printer/Creality LD-002R.ini b/PrusaSlicer/printer/Creality LD-002R.ini
new file mode 100644
index 0000000..6d5b392
--- /dev/null
+++ b/PrusaSlicer/printer/Creality LD-002R.ini
@@ -0,0 +1,37 @@
+# generated by PrusaSlicer 2.2.0+win64 on 2020-06-16 at 03:20:32 UTC
+absolute_correction = 0
+area_fill = 50
+bed_custom_model = 
+bed_custom_texture = 
+bed_shape = 0x0,120.96x0,120.96x68.04,0x68.04
+default_sla_material_profile = Prusa Orange Tough 0.05
+default_sla_print_profile = 0.05 Normal
+display_height = 68.04
+display_mirror_x = 1
+display_mirror_y = 0
+display_orientation = portrait
+display_pixels_x = 2560
+display_pixels_y = 1440
+display_width = 120.96
+elefant_foot_compensation = 0.2
+elefant_foot_min_width = 0.2
+fast_tilt_time = 5
+gamma_correction = 1
+inherits = Original Prusa SL1
+max_exposure_time = 120
+max_initial_exposure_time = 300
+max_print_height = 160
+min_exposure_time = 1
+min_initial_exposure_time = 1
+print_host = 
+printer_model = SL1
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_LD-002R\n\nSTART_CUSTOM_VALUES\nFLIP_XY\nLayerOffTime_0\nBottomLightOffDelay_2\nBottomLiftHeight_5\nLiftHeight_5\nBottomLiftSpeed_65\nLiftSpeed_65\nRetractSpeed_150\nBottomLightPWM_255\nLightPWM_255\nAntiAliasing_4 ; Use 0 or 1 for disable AntiAliasing with "printer gamma correction" set to 0, otherwise use multiples of 2 and "gamma correction" set to 1 for enable\nEND_CUSTOM_VALUES
+printer_settings_id = 
+printer_technology = SLA
+printer_variant = default
+printer_vendor = 
+printhost_apikey = 
+printhost_cafile = 
+relative_correction = 1,1
+slow_tilt_time = 8
+thumbnails = 400x400,800x480
diff --git a/PrusaSlicer/printer/Kelant S400.ini b/PrusaSlicer/printer/Kelant S400.ini
new file mode 100644
index 0000000..a0a3e36
--- /dev/null
+++ b/PrusaSlicer/printer/Kelant S400.ini
@@ -0,0 +1,37 @@
+# generated by PrusaSlicer 2.2.0+win64 on 2020-06-16 at 02:46:17 UTC
+absolute_correction = 0
+area_fill = 50
+bed_custom_model = 
+bed_custom_texture = 
+bed_shape = 0x0,192x0,192x120,0x120
+default_sla_material_profile = Prusa Orange Tough 0.05
+default_sla_print_profile = 0.05 Normal
+display_height = 120
+display_mirror_x = 1
+display_mirror_y = 0
+display_orientation = portrait
+display_pixels_x = 2560
+display_pixels_y = 1440
+display_width = 192
+elefant_foot_compensation = 0.2
+elefant_foot_min_width = 0.2
+fast_tilt_time = 5
+gamma_correction = 1
+inherits = Original Prusa SL1
+max_exposure_time = 120
+max_initial_exposure_time = 300
+max_print_height = 200
+min_exposure_time = 1
+min_initial_exposure_time = 1
+print_host = 
+printer_model = SL1
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_KELANT\nPRINTER_MODEL_S400\n\nSTART_CUSTOM_VALUES\nFLIP_XY\nLayerOffTime_0\nBottomLightOffDelay_0\nBottomLiftHeight_5\nLiftHeight_5\nBottomLiftSpeed_100\nLiftSpeed_100\nRetractSpeed_100\nBottomLightPWM_255\nLightPWM_255\nAntiAliasing_4 ; Use 0 or 1 for disable AntiAliasing with "printer gamma correction" set to 0, otherwise use multiples of 2 and "gamma correction" set to 1 for enable\nEND_CUSTOM_VALUES
+printer_settings_id = 
+printer_technology = SLA
+printer_variant = default
+printer_vendor = 
+printhost_apikey = 
+printhost_cafile = 
+relative_correction = 1,1
+slow_tilt_time = 8
+thumbnails = 400x400,800x480
diff --git a/PrusaSlicer/printer/Wanhao D7.ini b/PrusaSlicer/printer/Wanhao D7.ini
new file mode 100644
index 0000000..624f7d6
--- /dev/null
+++ b/PrusaSlicer/printer/Wanhao D7.ini
@@ -0,0 +1,37 @@
+# generated by PrusaSlicer 2.2.0+win64 on 2020-06-16 at 03:14:33 UTC
+absolute_correction = 0
+area_fill = 50
+bed_custom_model = 
+bed_custom_texture = 
+bed_shape = 0x0,120.96x0,120.96x68.5,0x68.5
+default_sla_material_profile = Prusa Orange Tough 0.05
+default_sla_print_profile = 0.05 Normal
+display_height = 68.5
+display_mirror_x = 1
+display_mirror_y = 0
+display_orientation = landscape
+display_pixels_x = 2560
+display_pixels_y = 1440
+display_width = 120.96
+elefant_foot_compensation = 0.2
+elefant_foot_min_width = 0.2
+fast_tilt_time = 5
+gamma_correction = 1
+inherits = Original Prusa SL1
+max_exposure_time = 120
+max_initial_exposure_time = 300
+max_print_height = 180
+min_exposure_time = 1
+min_initial_exposure_time = 1
+print_host = 
+printer_model = SL1
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_WANHAO\nPRINTER_MODEL_D7\n\nSTART_CUSTOM_VALUES\nLayerOffTime_0\nBottomLightOffDelay_0\nBottomLiftHeight_5\nLiftHeight_5\nBottomLiftSpeed_60\nLiftSpeed_60\nRetractSpeed_150\nBottomLightPWM_255\nLightPWM_255\nAntiAliasing_4 ; Use 0 or 1 for disable AntiAliasing with "printer gamma correction" set to 0, otherwise use multiples of 2 and "gamma correction" set to 1 for enable\nEND_CUSTOM_VALUES
+printer_settings_id = 
+printer_technology = SLA
+printer_variant = default
+printer_vendor = 
+printhost_apikey = 
+printhost_cafile = 
+relative_correction = 1,1
+slow_tilt_time = 8
+thumbnails = 400x400,800x480
diff --git a/PrusaSlicer/printer/Wanhao D8.ini b/PrusaSlicer/printer/Wanhao D8.ini
new file mode 100644
index 0000000..5eb9538
--- /dev/null
+++ b/PrusaSlicer/printer/Wanhao D8.ini
@@ -0,0 +1,37 @@
+# generated by PrusaSlicer 2.2.0+win64 on 2020-06-16 at 03:15:34 UTC
+absolute_correction = 0
+area_fill = 50
+bed_custom_model = 
+bed_custom_texture = 
+bed_shape = 0x0,192x0,192x120,0x120
+default_sla_material_profile = Prusa Orange Tough 0.05
+default_sla_print_profile = 0.05 Normal
+display_height = 120
+display_mirror_x = 1
+display_mirror_y = 0
+display_orientation = landscape
+display_pixels_x = 2560
+display_pixels_y = 1600
+display_width = 192
+elefant_foot_compensation = 0.2
+elefant_foot_min_width = 0.2
+fast_tilt_time = 5
+gamma_correction = 1
+inherits = Original Prusa SL1
+max_exposure_time = 120
+max_initial_exposure_time = 300
+max_print_height = 180
+min_exposure_time = 1
+min_initial_exposure_time = 1
+print_host = 
+printer_model = SL1
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_WANHAO\nPRINTER_MODEL_D8\n\nSTART_CUSTOM_VALUES\nLayerOffTime_0\nBottomLightOffDelay_0\nBottomLiftHeight_5\nLiftHeight_5\nBottomLiftSpeed_60\nLiftSpeed_60\nRetractSpeed_150\nBottomLightPWM_255\nLightPWM_255\nAntiAliasing_4 ; Use 0 or 1 for disable AntiAliasing with "printer gamma correction" set to 0, otherwise use multiples of 2 and "gamma correction" set to 1 for enable\nEND_CUSTOM_VALUES
+printer_settings_id = 
+printer_technology = SLA
+printer_variant = default
+printer_vendor = 
+printhost_apikey = 
+printhost_cafile = 
+relative_correction = 1,1
+slow_tilt_time = 8
+thumbnails = 400x400,800x480