Removed Original Prusa i3 MK3, MK2S, MK2 and MK2S-MMU.ini

1 files changed, 0 insertions, 3681 deletions

diff --git a/resources/profiles/Original Prusa i3 MK3, MK2S, MK2 and MK2S-MMU.ini b/resources/profiles/Original Prusa i3 MK3, MK2S, MK2 and MK2S-MMU.ini
deleted file mode 100644
index cb076ac35..000000000
--- a/resources/profiles/Original Prusa i3 MK3, MK2S, MK2 and MK2S-MMU.ini
+++ /dev/null
@@ -1,3681 +0,0 @@
-# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 17:08:04
-
-[print:0.05mm DETAIL]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 10
-bridge_acceleration = 300
-bridge_angle = 0
-bridge_flow_ratio = 0.7
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1
-complete_objects = 0
-default_acceleration = 500
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 20
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 25%
-fill_pattern = cubic
-first_layer_acceleration = 500
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 20
-gcode_comments = 0
-infill_acceleration = 800
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.5
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 30
-interface_shells = 0
-layer_height = 0.05
-max_print_speed = 80
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 300
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 30
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 15
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 30
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.3
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 1.5
-support_material_speed = 30
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.45
-top_solid_infill_speed = 20
-top_solid_layers = 15
-travel_speed = 180
-wipe_tower = 0
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.05mm DETAIL 0.25 nozzle]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 10
-bridge_acceleration = 300
-bridge_angle = 0
-bridge_flow_ratio = 0.7
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 and num_extruders==1
-complete_objects = 0
-default_acceleration = 500
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0
-external_perimeter_speed = 20
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.28
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 500
-first_layer_extrusion_width = 0.3
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 20
-gcode_comments = 0
-infill_acceleration = 800
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 20
-interface_shells = 0
-layer_height = 0.05
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 300
-perimeter_extruder = 1
-perimeter_extrusion_width = 0
-perimeter_speed = 20
-perimeters = 4
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 10
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0
-solid_infill_speed = 20
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.18
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 0
-support_material_interface_spacing = 0.15
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 1
-support_material_speed = 20
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 150%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0
-top_solid_infill_speed = 20
-top_solid_layers = 15
-travel_speed = 200
-wipe_tower = 0
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.05mm DETAIL MK3]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 10
-bridge_acceleration = 300
-bridge_angle = 0
-bridge_flow_ratio = 0.7
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
-complete_objects = 0
-default_acceleration = 500
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 20
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 25%
-fill_pattern = cubic
-first_layer_acceleration = 500
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 20
-gcode_comments = 0
-infill_acceleration = 800
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.5
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 30
-interface_shells = 0
-layer_height = 0.05
-max_print_speed = 80
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 300
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 30
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 15
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 30
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.3
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 1.5
-support_material_speed = 30
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.45
-top_solid_infill_speed = 20
-top_solid_layers = 15
-travel_speed = 180
-wipe_tower = 0
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.10mm DETAIL]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 7
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.7
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 40
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.1
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 50
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 50
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.45
-top_solid_infill_speed = 40
-top_solid_layers = 9
-travel_speed = 120
-wipe_tower = 0
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.10mm DETAIL 0.25 nozzle]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 7
-bridge_acceleration = 600
-bridge_angle = 0
-bridge_flow_ratio = 0.7
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.25
-external_perimeter_speed = 20
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.25
-fill_angle = 45
-fill_density = 15%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.25
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 1600
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.25
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 40
-interface_shells = 0
-layer_height = 0.1
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 600
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.25
-perimeter_speed = 25
-perimeters = 4
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 10
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.25
-solid_infill_speed = 40
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.18
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 0
-support_material_interface_spacing = 0.15
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 1
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 150%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.25
-top_solid_infill_speed = 30
-top_solid_layers = 9
-travel_speed = 120
-wipe_tower = 0
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.10mm DETAIL MK3]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 4
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.8
-bridge_speed = 30
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 40
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 3500
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 35%
-infill_speed = 200
-interface_shells = 0
-layer_height = 0.1
-max_print_speed = 250
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 60
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 200
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 0
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 50
-top_solid_layers = 5
-travel_speed = 250
-wipe_tower = 0
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.15mm 100mms Linear Advance]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 4
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.95
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 50
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 100
-interface_shells = 0
-layer_height = 0.15
-max_print_speed = 150
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 60
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 30
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 100
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 0
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 60
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 70
-top_solid_layers = 5
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.15mm OPTIMAL]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 5
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.8
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 40
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.15
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 50
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 50
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.45
-top_solid_infill_speed = 40
-top_solid_layers = 7
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.15mm OPTIMAL 0.25 nozzle]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 5
-bridge_acceleration = 600
-bridge_angle = 0
-bridge_flow_ratio = 0.7
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.25
-external_perimeter_speed = 20
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.25
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.25
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 1600
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.25
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 40
-interface_shells = 0
-layer_height = 0.15
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 600
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.25
-perimeter_speed = 25
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 10
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.25
-solid_infill_speed = 40
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.2
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 0
-support_material_interface_spacing = 0.15
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 1
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 35
-support_material_with_sheath = 0
-support_material_xy_spacing = 150%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.25
-top_solid_infill_speed = 30
-top_solid_layers = 7
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.15mm OPTIMAL 0.6 nozzle]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 5
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.8
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.61
-external_perimeter_speed = 40
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.67
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.65
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.75
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.15
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.65
-perimeter_speed = 50
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.65
-solid_infill_speed = 50
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.6
-top_solid_infill_speed = 40
-top_solid_layers = 7
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.15mm OPTIMAL MK3]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 4
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.8
-bridge_speed = 30
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 40
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 3500
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 35%
-infill_speed = 200
-interface_shells = 0
-layer_height = 0.15
-max_print_speed = 250
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 60
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 200
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 0
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 50
-top_solid_layers = 5
-travel_speed = 250
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.15mm OPTIMAL SOLUBLE FULL]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 5
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.8
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 25
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.15
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = Set your solluble extruder in Multiple Extruders > Support material/raft/skirt extruder &  Support material/raft interface extruder
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 40
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 0
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 40
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 1
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0
-support_material_enforce_layers = 0
-support_material_extruder = 4
-support_material_extrusion_width = 0.45
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 4
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.1
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 1
-support_material_threshold = 80
-support_material_with_sheath = 1
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.45
-top_solid_infill_speed = 30
-top_solid_layers = 7
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 20
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.15mm OPTIMAL SOLUBLE INTERFACE]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 5
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.8
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 25
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.15
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = Set your solluble extruder in Multiple Extruders >  Support material/raft interface extruder
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 40
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 0
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 40
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 1
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.45
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 4
-support_material_interface_layers = 3
-support_material_interface_spacing = 0.1
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 1
-support_material_threshold = 80
-support_material_with_sheath = 0
-support_material_xy_spacing = 120%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.45
-top_solid_infill_speed = 30
-top_solid_layers = 7
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 20
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.20mm 100mms Linear Advance]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 4
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.95
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 50
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 100
-interface_shells = 0
-layer_height = 0.2
-max_print_speed = 150
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 60
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 30
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 100
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 0
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 60
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 70
-top_solid_layers = 5
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.20mm NORMAL]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 4
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.95
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 40
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.2
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 50
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 50
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 0
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 40
-top_solid_layers = 5
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.20mm NORMAL 0.6 nozzle]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 4
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.8
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.61
-external_perimeter_speed = 40
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.67
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.65
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.75
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.2
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.65
-perimeter_speed = 50
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.65
-solid_infill_speed = 50
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.6
-top_solid_infill_speed = 40
-top_solid_layers = 5
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.20mm NORMAL MK3]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 4
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.8
-bridge_speed = 30
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 40
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 3500
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 35%
-infill_speed = 200
-interface_shells = 0
-layer_height = 0.2
-max_print_speed = 250
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 60
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 200
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 0
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 50
-top_solid_layers = 5
-travel_speed = 250
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.20mm NORMAL SOLUBLE FULL]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 4
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.95
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 30
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.2
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = Set your solluble extruder in Multiple Extruders > Support material/raft/skirt extruder &  Support material/raft interface extruder
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 40
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 0
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 40
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 1
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0
-support_material_enforce_layers = 0
-support_material_extruder = 4
-support_material_extrusion_width = 0.45
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 4
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.1
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 1
-support_material_threshold = 80
-support_material_with_sheath = 1
-support_material_xy_spacing = 120%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 30
-top_solid_layers = 5
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 20
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.20mm NORMAL SOLUBLE INTERFACE]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 4
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.95
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 30
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.2
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = Set your solluble extruder in Multiple Extruders >  Support material/raft interface extruder
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 40
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 0
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 40
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 1
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.45
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 4
-support_material_interface_layers = 3
-support_material_interface_spacing = 0.1
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 1
-support_material_threshold = 80
-support_material_with_sheath = 0
-support_material_xy_spacing = 120%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 30
-top_solid_layers = 5
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 20
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.35mm FAST]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 3
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.95
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.6
-external_perimeter_speed = 40
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.7
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.35
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.43
-perimeter_speed = 50
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.7
-solid_infill_speed = 60
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.43
-top_solid_infill_speed = 50
-top_solid_layers = 4
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.35mm FAST 0.6 nozzle]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 7
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.8
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.61
-external_perimeter_speed = 40
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.67
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.65
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.75
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.35
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.65
-perimeter_speed = 50
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.65
-solid_infill_speed = 60
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.6
-top_solid_infill_speed = 50
-top_solid_layers = 9
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.35mm FAST MK3]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 4
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.8
-bridge_speed = 30
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.6
-external_perimeter_speed = 40
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 3500
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.7
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 35%
-infill_speed = 200
-interface_shells = 0
-layer_height = 0.35
-max_print_speed = 250
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 60
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.7
-solid_infill_speed = 200
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 0
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.45
-top_solid_infill_speed = 50
-top_solid_layers = 4
-travel_speed = 250
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.35mm FAST sol full 0.6 nozzle]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 3
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.8
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 and num_extruders>1
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.6
-external_perimeter_speed = 30
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.67
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.65
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.75
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.35
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = Set your solluble extruder in Multiple Extruders >  Support material/raft interface extruder
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.65
-perimeter_speed = 40
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 0
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.65
-solid_infill_speed = 60
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 1
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0
-support_material_enforce_layers = 0
-support_material_extruder = 4
-support_material_extrusion_width = 0.55
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 4
-support_material_interface_layers = 3
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 1
-support_material_threshold = 80
-support_material_with_sheath = 0
-support_material_xy_spacing = 120%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.57
-top_solid_infill_speed = 50
-top_solid_layers = 4
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 20
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.35mm FAST sol int 0.6 nozzle]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 3
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.8
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 and num_extruders>1
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.6
-external_perimeter_speed = 30
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.67
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.65
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.75
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.35
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = Set your solluble extruder in Multiple Extruders >  Support material/raft interface extruder
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.65
-perimeter_speed = 40
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 0
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.65
-solid_infill_speed = 60
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 1
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.55
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 4
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 1
-support_material_threshold = 80
-support_material_with_sheath = 0
-support_material_xy_spacing = 150%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.57
-top_solid_infill_speed = 50
-top_solid_layers = 4
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 20
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[filament:ColorFabb Brass Bronze  1.75mm]
-bed_temperature = 60
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = nozzle_diameter[0]>0.35
-cooling = 1
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1.3
-fan_always_on = 1
-fan_below_layer_time = 100
-filament_colour = #804040
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 60
-first_layer_temperature = 210
-max_fan_speed = 100
-min_fan_speed = 85
-min_print_speed = 5
-slowdown_below_layer_time = 10
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
-temperature = 210
-
-[filament:ColorFabb HT 1.75mm]
-bed_temperature = 105
-bridge_fan_speed = 30
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 10
-filament_colour = #FF8000
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 105
-first_layer_temperature = 270
-max_fan_speed = 20
-min_fan_speed = 10
-min_print_speed = 5
-slowdown_below_layer_time = 10
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
-temperature = 270
-
-[filament:ColorFabb PLA-PHA]
-bed_temperature = 60
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 100
-filament_colour = #FF3232
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 15
-filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 60
-first_layer_temperature = 215
-max_fan_speed = 100
-min_fan_speed = 85
-min_print_speed = 15
-slowdown_below_layer_time = 10
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
-temperature = 210
-
-[filament:ColorFabb Woodfil 1.75mm]
-bed_temperature = 60
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = nozzle_diameter[0]>0.35
-cooling = 1
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1.2
-fan_always_on = 1
-fan_below_layer_time = 100
-filament_colour = #804040
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 60
-first_layer_temperature = 200
-max_fan_speed = 100
-min_fan_speed = 85
-min_print_speed = 5
-slowdown_below_layer_time = 10
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
-temperature = 200
-
-[filament:ColorFabb XT 1.75mm]
-bed_temperature = 65
-bridge_fan_speed = 50
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 20
-filament_colour = #FF8000
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 90
-first_layer_temperature = 240
-max_fan_speed = 50
-min_fan_speed = 30
-min_print_speed = 5
-slowdown_below_layer_time = 10
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
-temperature = 240
-
-[filament:ColorFabb XT-CF20 1.75mm]
-bed_temperature = 90
-bridge_fan_speed = 50
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1.2
-fan_always_on = 1
-fan_below_layer_time = 20
-filament_colour = #804040
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 1
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PET
-first_layer_bed_temperature = 90
-first_layer_temperature = 260
-max_fan_speed = 50
-min_fan_speed = 30
-min_print_speed = 5
-slowdown_below_layer_time = 10
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
-temperature = 260
-
-[filament:ColorFabb nGen 1.75mm]
-bed_temperature = 85
-bridge_fan_speed = 40
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 10
-filament_colour = #FF8000
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = NGEN
-first_layer_bed_temperature = 85
-first_layer_temperature = 240
-max_fan_speed = 35
-min_fan_speed = 20
-min_print_speed = 5
-slowdown_below_layer_time = 10
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
-temperature = 240
-
-[filament:ColorFabb nGen flex]
-bed_temperature = 85
-bridge_fan_speed = 40
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 10
-filament_colour = #FF8000
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 5
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = FLEX
-first_layer_bed_temperature = 85
-first_layer_temperature = 260
-max_fan_speed = 35
-min_fan_speed = 20
-min_print_speed = 5
-slowdown_below_layer_time = 10
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
-temperature = 260
-
-[filament:E3D Edge]
-bed_temperature = 90
-bridge_fan_speed = 50
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 20
-filament_colour = #FF8000
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG"
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PET
-first_layer_bed_temperature = 85
-first_layer_temperature = 230
-max_fan_speed = 50
-min_fan_speed = 30
-min_print_speed = 5
-slowdown_below_layer_time = 10
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
-temperature = 240
-
-[filament:E3D PC-ABS 1.75mm]
-bed_temperature = 100
-bridge_fan_speed = 30
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 0
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 20
-filament_colour = #3A80CA
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 13
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 100
-first_layer_temperature = 270
-max_fan_speed = 30
-min_fan_speed = 10
-min_print_speed = 5
-slowdown_below_layer_time = 10
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
-temperature = 270
-
-[filament:Fillamentum ABS 1.75mm]
-bed_temperature = 100
-bridge_fan_speed = 30
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 0
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 20
-filament_colour = #3A80CA
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 13
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = ABS
-first_layer_bed_temperature = 100
-first_layer_temperature = 240
-max_fan_speed = 30
-min_fan_speed = 10
-min_print_speed = 5
-slowdown_below_layer_time = 10
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
-temperature = 240
-
-[filament:Fillamentum ASA 1.75mm]
-bed_temperature = 100
-bridge_fan_speed = 30
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 0
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 20
-filament_colour = #3A80CA
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 13
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 100
-first_layer_temperature = 265
-max_fan_speed = 30
-min_fan_speed = 10
-min_print_speed = 5
-slowdown_below_layer_time = 10
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
-temperature = 265
-
-[filament:Fillamentum CPE HG100 HM100]
-bed_temperature = 90
-bridge_fan_speed = 50
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 20
-filament_colour = #FF8000
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = "CPE HG100 , CPE HM100"
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PET
-first_layer_bed_temperature = 90
-first_layer_temperature = 260
-max_fan_speed = 80
-min_fan_speed = 80
-min_print_speed = 5
-slowdown_below_layer_time = 10
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
-temperature = 260
-
-[filament:Fillamentum Timberfil]
-bed_temperature = 60
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = nozzle_diameter[0]>0.35
-cooling = 1
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1.2
-fan_always_on = 1
-fan_below_layer_time = 100
-filament_colour = #804040
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 60
-first_layer_temperature = 190
-max_fan_speed = 100
-min_fan_speed = 85
-min_print_speed = 15
-slowdown_below_layer_time = 10
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
-temperature = 190
-
-[filament:Generic ABS 1.75mm]
-bed_temperature = 100
-bridge_fan_speed = 30
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 0
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 20
-filament_colour = #3A80CA
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 13
-filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS"
-filament_settings_id = 
-filament_soluble = 0
-filament_type = ABS
-first_layer_bed_temperature = 100
-first_layer_temperature = 255
-max_fan_speed = 30
-min_fan_speed = 10
-min_print_speed = 5
-slowdown_below_layer_time = 10
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
-temperature = 255
-
-[filament:Generic PET 1.75mm]
-bed_temperature = 90
-bridge_fan_speed = 50
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 20
-filament_colour = #FF8000
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG"
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PET
-first_layer_bed_temperature = 85
-first_layer_temperature = 230
-max_fan_speed = 50
-min_fan_speed = 30
-min_print_speed = 5
-slowdown_below_layer_time = 10
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
-temperature = 240
-
-[filament:Generic PLA 1.75mm]
-bed_temperature = 60
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 100
-filament_colour = #FF3232
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 15
-filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 60
-first_layer_temperature = 215
-max_fan_speed = 100
-min_fan_speed = 85
-min_print_speed = 15
-slowdown_below_layer_time = 10
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
-temperature = 210
-
-[filament:Polymaker PC-Max]
-bed_temperature = 120
-bridge_fan_speed = 30
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 0
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 20
-filament_colour = #3A80CA
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 13
-filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS"
-filament_settings_id = 
-filament_soluble = 0
-filament_type = ABS
-first_layer_bed_temperature = 120
-first_layer_temperature = 270
-max_fan_speed = 30
-min_fan_speed = 10
-min_print_speed = 5
-slowdown_below_layer_time = 10
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
-temperature = 270
-
-[filament:Primavalue PVA]
-bed_temperature = 60
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 0
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 100
-filament_colour = #FFFFD7
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = "List of materials tested with standart PVA print settings for MK2:\n\nPrimaSelect PVA+\nICE FILAMENTS PVA 'NAUGHTY NATURAL'\nVerbatim BVOH"
-filament_settings_id = 
-filament_soluble = 1
-filament_type = PVA
-first_layer_bed_temperature = 60
-first_layer_temperature = 195
-max_fan_speed = 100
-min_fan_speed = 85
-min_print_speed = 15
-slowdown_below_layer_time = 10
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
-temperature = 195
-
-[filament:Prusa ABS 1.75mm]
-bed_temperature = 100
-bridge_fan_speed = 30
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 0
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 20
-filament_colour = #3A80CA
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 13
-filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS"
-filament_settings_id = 
-filament_soluble = 0
-filament_type = ABS
-first_layer_bed_temperature = 100
-first_layer_temperature = 255
-max_fan_speed = 30
-min_fan_speed = 10
-min_print_speed = 5
-slowdown_below_layer_time = 10
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
-temperature = 255
-
-[filament:Prusa HIPS 1.75mm]
-bed_temperature = 100
-bridge_fan_speed = 50
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 0.9
-fan_always_on = 1
-fan_below_layer_time = 10
-filament_colour = #FFFFD7
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 13
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 1
-filament_type = HIPS
-first_layer_bed_temperature = 100
-first_layer_temperature = 220
-max_fan_speed = 20
-min_fan_speed = 20
-min_print_speed = 5
-slowdown_below_layer_time = 10
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
-temperature = 220
-
-[filament:Prusa PET 1.75mm]
-bed_temperature = 90
-bridge_fan_speed = 50
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 20
-filament_colour = #FF8000
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG"
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PET
-first_layer_bed_temperature = 85
-first_layer_temperature = 230
-max_fan_speed = 50
-min_fan_speed = 30
-min_print_speed = 5
-slowdown_below_layer_time = 10
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
-temperature = 240
-
-[filament:Prusa PLA 1.75mm]
-bed_temperature = 60
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 100
-filament_colour = #FF3232
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 15
-filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 60
-first_layer_temperature = 215
-max_fan_speed = 100
-min_fan_speed = 85
-min_print_speed = 15
-slowdown_below_layer_time = 10
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
-temperature = 210
-
-[filament:SemiFlex or Flexfill 98A]
-bed_temperature = 50
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = nozzle_diameter[0]>0.35 and num_extruders==1
-cooling = 0
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1.2
-fan_always_on = 0
-fan_below_layer_time = 100
-filament_colour = #00CA0A
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 2.5
-filament_notes = "List of materials tested with FLEX print settings & FLEX material settings for MK2:\n\nFillamentum Flex 98A\nFillamentum Flex 92A\nPlasty Mladeč PP\nPlasty Mladeč TPE32 \nPlasty Mladeč TPE88"
-filament_settings_id = 
-filament_soluble = 0
-filament_type = FLEX
-first_layer_bed_temperature = 50
-first_layer_temperature = 220
-max_fan_speed = 90
-min_fan_speed = 70
-min_print_speed = 5
-slowdown_below_layer_time = 10
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
-temperature = 230
-
-[filament:Taulman Bridge 1.75mm]
-bed_temperature = 50
-bridge_fan_speed = 40
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 0
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 20
-filament_colour = #DEE0E6
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 90
-first_layer_temperature = 240
-max_fan_speed = 5
-min_fan_speed = 0
-min_print_speed = 5
-slowdown_below_layer_time = 10
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
-temperature = 250
-
-[filament:Taulman T-Glase 1.75mm]
-bed_temperature = 90
-bridge_fan_speed = 40
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 0
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 20
-filament_colour = #FF8000
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PET
-first_layer_bed_temperature = 90
-first_layer_temperature = 240
-max_fan_speed = 5
-min_fan_speed = 0
-min_print_speed = 5
-slowdown_below_layer_time = 10
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
-temperature = 240
-
-[filament:Verbatim BVOH]
-bed_temperature = 60
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 0
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 100
-filament_colour = #FFFFD7
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
-filament_settings_id = 
-filament_soluble = 1
-filament_type = PLA
-first_layer_bed_temperature = 60
-first_layer_temperature = 215
-max_fan_speed = 100
-min_fan_speed = 85
-min_print_speed = 15
-slowdown_below_layer_time = 10
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
-temperature = 210
-
-[filament:Verbatim PP]
-bed_temperature = 100
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 2
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 100
-filament_colour = #DEE0E6
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 5
-filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nEsun PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nEUMAKERS PLA"
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 100
-first_layer_temperature = 220
-max_fan_speed = 100
-min_fan_speed = 100
-min_print_speed = 15
-slowdown_below_layer_time = 10
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
-temperature = 220
-
-[printer:Original Prusa i3 MK2]
-bed_shape = 0x0,250x0,250x210,0x210
-before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
-between_objects_gcode = 
-deretract_speed = 0
-end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
-extruder_colour = #FFFF00
-extruder_offset = 0x0
-gcode_flavor = reprap
-layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
-max_layer_height = 0.25
-min_layer_height = 0.07
-nozzle_diameter = 0.4
-octoprint_apikey = 
-octoprint_host = 
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n
-printer_settings_id = 
-retract_before_travel = 1
-retract_before_wipe = 0%
-retract_layer_change = 1
-retract_length = 0.8
-retract_length_toolchange = 3
-retract_lift = 0.6
-retract_lift_above = 0
-retract_lift_below = 199
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 35
-serial_port = 
-serial_speed = 250000
-single_extruder_multi_material = 0
-start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line\nG92 E0.0
-toolchange_gcode = 
-use_firmware_retraction = 0
-use_relative_e_distances = 1
-use_volumetric_e = 0
-variable_layer_height = 1
-wipe = 1
-z_offset = 0
-
-[printer:Original Prusa i3 MK2 0.25 nozzle]
-bed_shape = 0x0,250x0,250x210,0x210
-before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
-between_objects_gcode = 
-deretract_speed = 0
-end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
-extruder_colour = #FFFF00
-extruder_offset = 0x0
-gcode_flavor = reprap
-layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
-max_layer_height = 0.1
-min_layer_height = 0.05
-nozzle_diameter = 0.25
-octoprint_apikey = 
-octoprint_host = 
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n
-printer_settings_id = 
-retract_before_travel = 1
-retract_before_wipe = 0%
-retract_layer_change = 1
-retract_length = 1
-retract_length_toolchange = 3
-retract_lift = 0.6
-retract_lift_above = 0
-retract_lift_below = 199
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 50
-serial_port = 
-serial_speed = 250000
-single_extruder_multi_material = 0
-start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line\nG92 E0.0
-toolchange_gcode = 
-use_firmware_retraction = 0
-use_relative_e_distances = 1
-use_volumetric_e = 0
-variable_layer_height = 0
-wipe = 1
-z_offset = 0
-
-[printer:Original Prusa i3 MK2 0.6 nozzle]
-bed_shape = 0x0,250x0,250x210,0x210
-before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
-between_objects_gcode = 
-deretract_speed = 0
-end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
-extruder_colour = #FFFF00
-extruder_offset = 0x0
-gcode_flavor = reprap
-layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
-max_layer_height = 0.35
-min_layer_height = 0.1
-nozzle_diameter = 0.6
-octoprint_apikey = 
-octoprint_host = 
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n
-printer_settings_id = 
-retract_before_travel = 1
-retract_before_wipe = 0%
-retract_layer_change = 1
-retract_length = 0.8
-retract_length_toolchange = 3
-retract_lift = 0.6
-retract_lift_above = 0
-retract_lift_below = 199
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 35
-serial_port = 
-serial_speed = 250000
-single_extruder_multi_material = 0
-start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line\nG92 E0.0
-toolchange_gcode = 
-use_firmware_retraction = 0
-use_relative_e_distances = 1
-use_volumetric_e = 0
-variable_layer_height = 1
-wipe = 1
-z_offset = 0
-
-[printer:Original Prusa i3 MK2 MM Single Mode]
-bed_shape = 0x0,250x0,250x210,0x210
-before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
-between_objects_gcode = 
-deretract_speed = 50
-end_gcode = G1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7  \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3  \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\nM107 ; fan off\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0  ; home X axis\nM84     ; disable motors\n\n
-extruder_colour = #FFAA55
-extruder_offset = 0x0
-gcode_flavor = reprap
-layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
-max_layer_height = 0.25
-min_layer_height = 0.07
-nozzle_diameter = 0.4
-octoprint_apikey = 
-octoprint_host = 
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN
-printer_settings_id = 
-retract_before_travel = 3
-retract_before_wipe = 0%
-retract_layer_change = 0
-retract_length = 4
-retract_length_toolchange = 6
-retract_lift = 0.6
-retract_lift_above = 0
-retract_lift_below = 199
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 80
-serial_port = 
-serial_speed = 250000
-single_extruder_multi_material = 1
-start_gcode = M115 U3.1.0 ; tell printer latest fw version\n; Start G-Code sequence START\nT?\nM104 S[first_layer_temperature]\nM140 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nM190 S[first_layer_bed_temperature]\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100\nM92 E140\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0  F1000.0\nG1 X160.0 E20.0  F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG1 E-4 F1000.0\nG92 E0.0
-toolchange_gcode = 
-use_firmware_retraction = 0
-use_relative_e_distances = 1
-use_volumetric_e = 0
-variable_layer_height = 1
-wipe = 1
-z_offset = 0
-
-[printer:Original Prusa i3 MK2 MM Single Mode 0.6 nozzle]
-bed_shape = 0x0,250x0,250x210,0x210
-before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
-between_objects_gcode = 
-deretract_speed = 50
-end_gcode = G1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7  \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3  \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\nM107 ; fan off\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0  ; home X axis\nM84     ; disable motors\n\n
-extruder_colour = #FFAA55
-extruder_offset = 0x0
-gcode_flavor = reprap
-layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
-max_layer_height = 0.25
-min_layer_height = 0.07
-nozzle_diameter = 0.6
-octoprint_apikey = 
-octoprint_host = 
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN
-printer_settings_id = 
-retract_before_travel = 3
-retract_before_wipe = 0%
-retract_layer_change = 0
-retract_length = 4
-retract_length_toolchange = 6
-retract_lift = 0.6
-retract_lift_above = 0
-retract_lift_below = 199
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 80
-serial_port = 
-serial_speed = 250000
-single_extruder_multi_material = 1
-start_gcode = M115 U3.1.0 ; tell printer latest fw version\n; Start G-Code sequence START\nT?\nM104 S[first_layer_temperature]\nM140 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nM190 S[first_layer_bed_temperature]\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100\nM92 E140\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0  F1000.0\nG1 X160.0 E20.0  F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG1 E-4 F1000.0\nG92 E0.0
-toolchange_gcode = 
-use_firmware_retraction = 0
-use_relative_e_distances = 1
-use_volumetric_e = 0
-variable_layer_height = 1
-wipe = 1
-z_offset = 0
-
-[printer:Original Prusa i3 MK2 MultiMaterial]
-bed_shape = 0x0,250x0,250x210,0x210
-before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
-between_objects_gcode = 
-deretract_speed = 50,50,50,50
-end_gcode = {if not has_wipe_tower}\n; Pull the filament into the cooling tubes.\nG1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7  \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3  \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\n{endif}\nM107 ; fan off\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0  ; home X axis\nM84     ; disable motors
-extruder_colour = #FFAA55;#5182DB;#4ECDD3;#FB7259
-extruder_offset = 0x0,0x0,0x0,0x0
-gcode_flavor = reprap
-layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
-max_layer_height = 0.25,0.25,0.25,0.25
-min_layer_height = 0.07,0.07,0.07,0.07
-nozzle_diameter = 0.4,0.4,0.4,0.4
-octoprint_apikey = 
-octoprint_host = 
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN
-printer_settings_id = 
-retract_before_travel = 3,3,3,3
-retract_before_wipe = 60%,60%,60%,60%
-retract_layer_change = 0,0,0,0
-retract_length = 4,4,4,4
-retract_length_toolchange = 4,4,4,4
-retract_lift = 0.6,0.6,0.6,0.6
-retract_lift_above = 0,0,0,0
-retract_lift_below = 199,199,199,199
-retract_restart_extra = 0,0,0,0
-retract_restart_extra_toolchange = 0,0,0,0
-retract_speed = 80,80,80,80
-serial_port = 
-serial_speed = 250000
-single_extruder_multi_material = 1
-start_gcode = M115 U3.1.0 ; tell printer latest fw version\n; Start G-Code sequence START\nT[initial_tool]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100 ; set max feedrate\nM92 E140 ; E-steps per filament milimeter\n{if not has_wipe_tower}\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0  F1000.0\nG1 X160.0 E20.0  F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG1 E-4 F1000.0\n{endif}\nG92 E0.0
-toolchange_gcode = 
-use_firmware_retraction = 0
-use_relative_e_distances = 1
-use_volumetric_e = 0
-variable_layer_height = 0
-wipe = 1,1,1,1
-z_offset = 0
-
-[printer:Original Prusa i3 MK2 MultiMaterial 0.6 nozzle]
-bed_shape = 0x0,250x0,250x210,0x210
-before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
-between_objects_gcode = 
-deretract_speed = 50,50,50,50
-end_gcode = {if not has_wipe_tower}\nG1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7  \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3  \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\n{endif}\nM107 ; fan off\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0  ; home X axis\nM84     ; disable motors\n
-extruder_colour = #FFAA55;#5182DB;#4ECDD3;#FB7259
-extruder_offset = 0x0,0x0,0x0,0x0
-gcode_flavor = reprap
-layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
-max_layer_height = 0.25,0.25,0.25,0.25
-min_layer_height = 0.07,0.07,0.07,0.07
-nozzle_diameter = 0.6,0.6,0.6,0.6
-octoprint_apikey = 
-octoprint_host = 
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN
-printer_settings_id = 
-retract_before_travel = 3,3,3,3
-retract_before_wipe = 60%,60%,60%,60%
-retract_layer_change = 0,0,0,0
-retract_length = 4,4,4,4
-retract_length_toolchange = 4,4,4,4
-retract_lift = 0.6,0.6,0.6,0.6
-retract_lift_above = 0,0,0,0
-retract_lift_below = 199,199,199,199
-retract_restart_extra = 0,0,0,0
-retract_restart_extra_toolchange = 0,0,0,0
-retract_speed = 80,80,80,80
-serial_port = 
-serial_speed = 250000
-single_extruder_multi_material = 1
-start_gcode = M115 U3.1.0 ; tell printer latest fw version\n; Start G-Code sequence START\nT[initial_tool]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100\nM92 E140\n{if not has_wipe_tower}\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0  F1000.0\nG1 X160.0 E20.0  F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG1 E-4 F1000.0\n{endif}\nG92 E0.0
-toolchange_gcode = 
-use_firmware_retraction = 0
-use_relative_e_distances = 1
-use_volumetric_e = 0
-variable_layer_height = 0
-wipe = 1,1,1,1
-z_offset = 0
-
-[printer:Original Prusa i3 MK3]
-bed_shape = 0x0,250x0,250x210,0x210
-before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
-between_objects_gcode = 
-deretract_speed = 0
-end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
-extruder_colour = #FFFF00
-extruder_offset = 0x0
-gcode_flavor = reprap
-layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
-max_layer_height = 0.25
-min_layer_height = 0.07
-nozzle_diameter = 0.4
-octoprint_apikey = 
-octoprint_host = 
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
-retract_before_travel = 1
-retract_before_wipe = 0%
-retract_layer_change = 1
-retract_length = 0.8
-retract_length_toolchange = 3
-retract_lift = 0.6
-retract_lift_above = 0
-retract_lift_below = 209
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 35
-serial_port = 
-serial_speed = 250000
-single_extruder_multi_material = 0
-start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line\nG92 E0.0
-toolchange_gcode = 
-use_firmware_retraction = 0
-use_relative_e_distances = 1
-use_volumetric_e = 0
-variable_layer_height = 1
-wipe = 1
-z_offset = 0
-
-[presets]
-print = 0.15mm 100mms Linear Advance
-printer = Original Prusa i3 MK2
-filament = Prusa PLA 1.75mm