Merge remote-tracking branch 'remotes/origin/ys_improvements'

7 files changed, 91 insertions, 9 deletions

diff --git a/src/slic3r/GUI/GUI_ObjectLayers.cpp b/src/slic3r/GUI/GUI_ObjectLayers.cpp
index d62bb2727..157e45ab4 100644
--- a/src/slic3r/GUI/GUI_ObjectLayers.cpp
+++ b/src/slic3r/GUI/GUI_ObjectLayers.cpp
@@ -156,8 +156,11 @@ void ObjectLayers::create_layers_list()
         const t_layer_height_range& range = layer.first;
         auto del_btn = new PlusMinusButton(m_parent, m_bmp_delete, range);
         del_btn->SetToolTip(_(L("Remove layer range")));
+
         auto add_btn = new PlusMinusButton(m_parent, m_bmp_add, range);
-        add_btn->SetToolTip(_(L("Add layer range")));
+        wxString tooltip = wxGetApp().obj_list()->can_add_new_range_after_current(range);
+        add_btn->SetToolTip(tooltip.IsEmpty() ? _(L("Add layer range")) : tooltip);
+        add_btn->Enable(tooltip.IsEmpty());
 
         auto sizer = create_layer(range, del_btn, add_btn);
         sizer->Add(del_btn, 0, wxRIGHT | wxLEFT, em_unit(m_parent));
diff --git a/src/slic3r/GUI/GUI_ObjectList.cpp b/src/slic3r/GUI/GUI_ObjectList.cpp
index 80c1ce364..5ac22e54a 100644
--- a/src/slic3r/GUI/GUI_ObjectList.cpp
+++ b/src/slic3r/GUI/GUI_ObjectList.cpp
@@ -2978,6 +2978,40 @@ void ObjectList::add_layer_range_after_current(const t_layer_height_range curren
     select_item(layers_item);
 }
 
+wxString ObjectList::can_add_new_range_after_current(const t_layer_height_range current_range)
+{
+    wxString ret;
+    const int obj_idx = get_selected_obj_idx();
+    if (obj_idx < 0)
+        // This should not happen.
+        return ret;
+
+    t_layer_config_ranges& ranges = object(obj_idx)->layer_config_ranges;
+    auto it_range = ranges.find(current_range);
+    assert(it_range != ranges.end());
+    if (it_range == ranges.end())
+        // This shoudl not happen.
+        return ret;
+
+    auto it_next_range = it_range;
+    if (++it_next_range == ranges.end())
+        return ret;
+    
+    if (const std::pair<coordf_t, coordf_t>& next_range = it_next_range->first; current_range.second <= next_range.first)
+    {
+        if (current_range.second == next_range.first &&
+            next_range.second - next_range.first < get_min_layer_height(ranges.at(next_range).opt_int("extruder")))
+                ret = _(L("A difference between ranges is a less than minimum layer height."));
+    }
+    else
+        ret = _(L("End of current range is bigger then next one."));
+    
+    if (!ret.IsEmpty())
+        ret += "\n" + _(L("New range between them couldn't be added."));
+
+    return ret;
+}
+
 void ObjectList::add_layer_item(const t_layer_height_range& range, 
                                 const wxDataViewItem layers_item, 
                                 const int layer_idx /* = -1*/)
@@ -3048,12 +3082,10 @@ bool ObjectList::edit_layer_range(const t_layer_height_range& range, const t_lay
             add_layer_item(r.first, root_item);
     }
 
-    if (dont_update_ui)
-        return true;
+    if (!dont_update_ui)
+        select_item(sel_type&itLayer ? m_objects_model->GetItemByLayerRange(obj_idx, new_range) : root_item);
 
-    select_item(sel_type&itLayer ? m_objects_model->GetItemByLayerRange(obj_idx, new_range) : root_item);
     Expand(root_item);
-
     return true;
 }
 
diff --git a/src/slic3r/GUI/GUI_ObjectList.hpp b/src/slic3r/GUI/GUI_ObjectList.hpp
index 0f067d116..adaa31242 100644
--- a/src/slic3r/GUI/GUI_ObjectList.hpp
+++ b/src/slic3r/GUI/GUI_ObjectList.hpp
@@ -327,6 +327,7 @@ public:
     // may have been postponed from the "kill focus" event of a text field, if the focus was lost for the "add layer" button.
     // Rather providing the range by a value than by a reference, so that the memory referenced cannot be invalidated.
     void add_layer_range_after_current(const t_layer_height_range current_range);
+    wxString can_add_new_range_after_current( t_layer_height_range current_range);
     void add_layer_item (const t_layer_height_range& range, 
                          const wxDataViewItem layers_item, 
                          const int layer_idx = -1);
diff --git a/src/slic3r/GUI/Plater.cpp b/src/slic3r/GUI/Plater.cpp
index 218677931..fb61c4f24 100644
--- a/src/slic3r/GUI/Plater.cpp
+++ b/src/slic3r/GUI/Plater.cpp
@@ -207,9 +207,11 @@ class SlicedInfo : public wxStaticBoxSizer
 public:
     SlicedInfo(wxWindow *parent);
     void SetTextAndShow(SlicedInfoIdx idx, const wxString& text, const wxString& new_label="");
+    void SetNoteAndShow(const wxString& text);
 
 private:
     std::vector<std::pair<wxStaticText*, wxStaticText*>> info_vec;
+    wxStaticText*       m_notes {nullptr};
 };
 
 SlicedInfo::SlicedInfo(wxWindow *parent) :
@@ -241,6 +243,10 @@ SlicedInfo::SlicedInfo(wxWindow *parent) :
     init_info_label(_(L("Number of tool changes")));
 
     Add(grid_sizer, 0, wxEXPAND);
+
+    m_notes = new wxStaticText(parent, wxID_ANY, "N/A");
+    Add(m_notes, 0, wxEXPAND);
+
     this->Show(false);
 }
 
@@ -255,6 +261,14 @@ void SlicedInfo::SetTextAndShow(SlicedInfoIdx idx, const wxString& text, const w
     info_vec[idx].second->Show(show);
 }
 
+void SlicedInfo::SetNoteAndShow(const wxString& text)
+{
+    const bool show = text != "N/A";
+    if (show)
+        m_notes->SetLabelText(text);
+    m_notes->Show(show);
+}
+
 PresetComboBox::PresetComboBox(wxWindow *parent, Preset::Type preset_type) :
 PresetBitmapComboBox(parent, wxSize(15 * wxGetApp().em_unit(), -1)),
     preset_type(preset_type),
@@ -1245,6 +1259,18 @@ void Sidebar::update_sliced_info_sizer()
             p->sliced_info->SetTextAndShow(siFilament_mm3,  wxString::Format("%.2f", ps.total_extruded_volume));
             p->sliced_info->SetTextAndShow(siFilament_g,    ps.total_weight == 0.0 ? "N/A" : wxString::Format("%.2f", ps.total_weight));
 
+            // Show a note information, if there is not enough filaments to complete a print
+            wxString note = "N/A";
+            DynamicPrintConfig* cfg = wxGetApp().get_tab(Preset::TYPE_FILAMENT)->get_config();
+            auto filament_spool_weights = dynamic_cast<const ConfigOptionFloats*>(cfg->option("filament_spool_weight"))->values;
+            if (ps.total_weight > 0.0 && !filament_spool_weights.empty() && filament_spool_weights[0] > 0.0 && 
+                ps.total_weight > filament_spool_weights[0])
+                note = "\n" + _(L("WARNING")) + ":\n   " + 
+                       _(L("There is not enough filaments to complete a print")) + ".\n   " +
+                       from_u8((boost::format(_utf8(L("You only have %.2f g of the required %.2f g."))) % 
+                                filament_spool_weights[0] % ps.total_weight).str());
+            p->sliced_info->SetNoteAndShow(note);
+
             new_label = _(L("Cost"));
             if (is_wipe_tower)
                 new_label += from_u8((boost::format(":\n    - %1%\n    - %2%") % _utf8(L("objects")) % _utf8(L("wipe tower"))).str());
diff --git a/src/slic3r/GUI/Preset.cpp b/src/slic3r/GUI/Preset.cpp
index 28c959b69..3761835f1 100644
--- a/src/slic3r/GUI/Preset.cpp
+++ b/src/slic3r/GUI/Preset.cpp
@@ -413,7 +413,7 @@ const std::vector<std::string>& Preset::print_options()
         "perimeter_speed", "small_perimeter_speed", "external_perimeter_speed", "infill_speed", "solid_infill_speed",
         "top_solid_infill_speed", "support_material_speed", "support_material_xy_spacing", "support_material_interface_speed",
         "bridge_speed", "gap_fill_speed", "travel_speed", "first_layer_speed", "perimeter_acceleration", "infill_acceleration",
-        "bridge_acceleration", "first_layer_acceleration", "default_acceleration", "skirts", "skirt_distance", "skirt_height",
+        "bridge_acceleration", "first_layer_acceleration", "default_acceleration", "skirts", "skirt_distance", "skirt_height", "infinit_skirt",
         "min_skirt_length", "brim_width", "support_material", "support_material_auto", "support_material_threshold", "support_material_enforce_layers",
         "raft_layers", "support_material_pattern", "support_material_with_sheath", "support_material_spacing",
         "support_material_synchronize_layers", "support_material_angle", "support_material_interface_layers",
@@ -435,7 +435,7 @@ const std::vector<std::string>& Preset::filament_options()
 {
     static std::vector<std::string> s_opts {
         "filament_colour", "filament_diameter", "filament_type", "filament_soluble", "filament_notes", "filament_max_volumetric_speed",
-        "extrusion_multiplier", "filament_density", "filament_cost", "filament_loading_speed", "filament_loading_speed_start", "filament_load_time",
+        "extrusion_multiplier", "filament_density", "filament_cost", "filament_spool_weight", "filament_loading_speed", "filament_loading_speed_start", "filament_load_time",
         "filament_unloading_speed", "filament_unloading_speed_start", "filament_unload_time", "filament_toolchange_delay", "filament_cooling_moves",
         "filament_cooling_initial_speed", "filament_cooling_final_speed", "filament_ramming_parameters", "filament_minimal_purge_on_wipe_tower",
         "temperature", "first_layer_temperature", "bed_temperature", "first_layer_bed_temperature", "fan_always_on", "cooling", "min_fan_speed",
diff --git a/src/slic3r/GUI/Tab.cpp b/src/slic3r/GUI/Tab.cpp
index 9e49dc5bd..7a8a4579e 100644
--- a/src/slic3r/GUI/Tab.cpp
+++ b/src/slic3r/GUI/Tab.cpp
@@ -1100,6 +1100,12 @@ void Tab::update_frequently_changed_parameters()
     }
 }
 
+void Tab::update_sliced_info_on_plater()
+{
+    wxGetApp().sidebar().update_sliced_info_sizer();
+    wxGetApp().sidebar().Layout();
+}
+
 void TabPrint::build()
 {
     m_presets = &m_preset_bundle->prints;
@@ -1172,6 +1178,7 @@ void TabPrint::build()
         optgroup->append_single_option_line("skirts");
         optgroup->append_single_option_line("skirt_distance");
         optgroup->append_single_option_line("skirt_height");
+        optgroup->append_single_option_line("infinit_skirt");
         optgroup->append_single_option_line("min_skirt_length");
 
         optgroup = page->new_optgroup(_(L("Brim")));
@@ -1484,6 +1491,19 @@ void TabFilament::build()
         optgroup->append_single_option_line("extrusion_multiplier");
         optgroup->append_single_option_line("filament_density");
         optgroup->append_single_option_line("filament_cost");
+        optgroup->append_single_option_line("filament_spool_weight");
+
+        optgroup->m_on_change = [this, optgroup](t_config_option_key opt_key, boost::any value)
+        {
+            update_dirty();
+
+            if (opt_key== "filament_spool_weight")
+                // Change of this option only has an influence to an update of "Sliced Info"
+                update_sliced_info_on_plater();
+            else
+                // update configuration for its check and to schedule a background process, if needed
+                update();
+        };
 
         optgroup = page->new_optgroup(_(L("Temperature")) + wxString(" °C", wxConvUTF8));
         Line line = { _(L("Extruder")), "" };
@@ -3567,8 +3587,7 @@ void TabSLAMaterial::build()
         update_dirty();
 
         // Change of any from those options influences for an update of "Sliced Info"
-        wxGetApp().sidebar().update_sliced_info_sizer();
-        wxGetApp().sidebar().Layout();
+        update_sliced_info_on_plater();
     };
 
     optgroup = page->new_optgroup(_(L("Layers")));
diff --git a/src/slic3r/GUI/Tab.hpp b/src/slic3r/GUI/Tab.hpp
index e2b00dc40..8cb1f549c 100644
--- a/src/slic3r/GUI/Tab.hpp
+++ b/src/slic3r/GUI/Tab.hpp
@@ -321,6 +321,7 @@ protected:
 	void			build_preset_description_line(ConfigOptionsGroup* optgroup);
 	void			update_preset_description_line();
 	void			update_frequently_changed_parameters();
+    void			update_sliced_info_on_plater();
 	void			fill_icon_descriptions();
 	void			set_tooltips_text();