diff options
author | supermerill <merill@free.fr> | 2022-01-05 01:10:42 +0300 |
---|---|---|
committer | supermerill <merill@free.fr> | 2022-01-05 02:07:50 +0300 |
commit | 3a2256e88815a74f089e3b7eced6de73b2008b7a (patch) | |
tree | ccd02bd4558ecf11e039ba75082d827feb8568a7 /src | |
parent | 74e01b5759a3afd9314ef0b7ba8090e834aebf11 (diff) |
tooltip update
Diffstat (limited to 'src')
-rw-r--r-- | src/libslic3r/PrintConfig.cpp | 16 |
1 files changed, 9 insertions, 7 deletions
diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp index a707ab94c..393c3acdc 100644 --- a/src/libslic3r/PrintConfig.cpp +++ b/src/libslic3r/PrintConfig.cpp @@ -1257,7 +1257,8 @@ void PrintConfigDef::init_fff_params() def = this->add("extrusion_width", coFloatOrPercent); def->label = L("Default extrusion width"); def->category = OptionCategory::width; - def->tooltip = L("Set this to a non-zero value to allow a manual extrusion width. " + def->tooltip = L("This is the DEFAULT extrusion width. It's ONLY used to REPLACE 0-width fields. It's useless when all other width fields have a value." + "Set this to a non-zero value to allow a manual extrusion width. " "If left to zero, Slic3r derives extrusion widths from the nozzle diameter " "(see the tooltips for perimeter extrusion width, infill extrusion width etc). " "If expressed as percentage (for example: 105%), it will be computed over nozzle diameter." @@ -1275,7 +1276,8 @@ void PrintConfigDef::init_fff_params() def = this->add("extrusion_spacing", coFloatOrPercent); def->label = L("Default extrusion spacing"); def->category = OptionCategory::width; - def->tooltip = L("Like Default extrusion width but spacing is the distance between two lines (as they overlap a bit, it's not the same)." + def->tooltip = L("This is the DEFAULT extrusion spacing. It's convert to a width and this width can be used to REPLACE 0-width fields. It's useless when all width fields have a value." + "Like Default extrusion width but spacing is the distance between two lines (as they overlap a bit, it's not the same)." "\nYou can set either 'Spacing', or 'Width'; the other will be calculated, using the perimeter 'Overlap' percentages and default layer height."); def->sidetext = L("mm or %"); def->ratio_over = "nozzle_diameter"; @@ -3372,8 +3374,8 @@ void PrintConfigDef::init_fff_params() def = this->add("resolution_internal", coFloat); def->label = L("Internal resolution"); def->category = OptionCategory::slicing; - def->tooltip = L("Minimum detail resolution, used for internal strutures (gapfill and some infill patterns)." - "\nDon't put a too small value (0.05mm is way too low for many printers), as it may creates too many very small segments that may difficult to display and print."); + def->tooltip = L("Minimum detail resolution, used for internal structures (gapfill and some infill patterns)." + "\nDon't put a too-small value (0.05mm is way too low for many printers), as it may create too many very small segments that may be difficult to display and print."); def->sidetext = L("mm"); def->min = 0.001; def->precision = 8; @@ -4573,8 +4575,8 @@ void PrintConfigDef::init_fff_params() def = this->add("wipe", coBools); def->label = L("Wipe while retracting"); def->category = OptionCategory::extruders; - def->tooltip = L("This flag will move the nozzle while retracting to minimize the possible blob " - "on leaky extruders."); + def->tooltip = L("This flag will move the nozzle while retracting to minimize the possible blob on leaky extruders." + "\nNote that as a wipe only happens when there is a retraction, the 'only retract when crossing perimeters' print setting can greatly reduce the number of wipes."); def->mode = comAdvanced; def->is_vector_extruder = true; def->set_default_value(new ConfigOptionBools{ false }); @@ -4582,7 +4584,7 @@ void PrintConfigDef::init_fff_params() def = this->add("wipe_only_crossing", coBools); def->label = L("Wipe only when crossing perimeters"); def->category = OptionCategory::extruders; - def->tooltip = L("Don't wipe when you don't cross a perimeter."); + def->tooltip = L("Don't wipe when you don't cross a perimeter. Need 'only_retract_when_crossing_perimeters'and 'wipe' enabled."); def->mode = comAdvanced; def->is_vector_extruder = true; def->set_default_value(new ConfigOptionBools{ true }); |