1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
|
/*
* This file is part of the libopencm3 project.
*
* Copyright (C) 2011 Gareth McMullin <gareth@blacksphere.co.nz>
*
* This library is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this library. If not, see <http://www.gnu.org/licenses/>.
*/
#include <string.h>
#include <libopencm3/cm3/common.h>
#include <libopencm3/stm32/tools.h>
#include <libopencm3/stm32/rcc.h>
#include <libopencm3/usb/usbd.h>
#include <libopencm3/usb/dwc/otg_fs.h>
#include "usb_private.h"
#include "usb_dwc_common.h"
/* Receive FIFO size in 32-bit words. */
#define RX_FIFO_SIZE 128
static usbd_device *stm32f107_usbd_init(void);
static struct _usbd_device usbd_dev;
const struct _usbd_driver stm32f107_usb_driver = {
.init = stm32f107_usbd_init,
.set_address = dwc_set_address,
.ep_setup = dwc_ep_setup,
.ep_reset = dwc_endpoints_reset,
.ep_stall_set = dwc_ep_stall_set,
.ep_stall_get = dwc_ep_stall_get,
.ep_nak_set = dwc_ep_nak_set,
.ep_write_packet = dwc_ep_write_packet,
.ep_read_packet = dwc_ep_read_packet,
.poll = dwc_poll,
.disconnect = dwc_disconnect,
.base_address = USB_OTG_FS_BASE,
.set_address_before_status = 1,
.rx_fifo_size = RX_FIFO_SIZE,
};
/** Initialize the USB device controller hardware of the STM32. */
static usbd_device *stm32f107_usbd_init(void)
{
rcc_periph_clock_enable(RCC_OTGFS);
OTG_FS_GUSBCFG |= OTG_GUSBCFG_PHYSEL;
/* Wait for AHB idle. */
while (!(OTG_FS_GRSTCTL & OTG_GRSTCTL_AHBIDL));
/* Do core soft reset. */
OTG_FS_GRSTCTL |= OTG_GRSTCTL_CSRST;
while (OTG_FS_GRSTCTL & OTG_GRSTCTL_CSRST);
if (OTG_FS_CID >= OTG_CID_HAS_VBDEN) {
/* Enable VBUS detection in device mode and power up the PHY. */
OTG_FS_GCCFG |= OTG_GCCFG_VBDEN | OTG_GCCFG_PWRDWN;
} else {
/* Enable VBUS sensing in device mode and power up the PHY. */
OTG_FS_GCCFG |= OTG_GCCFG_VBUSBSEN | OTG_GCCFG_PWRDWN;
}
/* Explicitly enable DP pullup (not all cores do this by default) */
OTG_FS_DCTL &= ~OTG_DCTL_SDIS;
/* Force peripheral only mode. */
OTG_FS_GUSBCFG |= OTG_GUSBCFG_FDMOD | OTG_GUSBCFG_TRDT_MASK;
OTG_FS_GINTSTS = OTG_GINTSTS_MMIS;
/* Full speed device. */
OTG_FS_DCFG |= OTG_DCFG_DSPD;
/* Restart the PHY clock. */
OTG_FS_PCGCCTL = 0;
OTG_FS_GRXFSIZ = stm32f107_usb_driver.rx_fifo_size;
usbd_dev.fifo_mem_top = stm32f107_usb_driver.rx_fifo_size;
/* Unmask interrupts for TX and RX. */
OTG_FS_GAHBCFG |= OTG_GAHBCFG_GINT;
OTG_FS_GINTMSK = OTG_GINTMSK_ENUMDNEM |
OTG_GINTMSK_RXFLVLM |
OTG_GINTMSK_IEPINT |
OTG_GINTMSK_USBSUSPM |
OTG_GINTMSK_WUIM;
OTG_FS_DAINTMSK = 0xF;
OTG_FS_DIEPMSK = OTG_DIEPMSK_XFRCM;
return &usbd_dev;
}
|
