diff options
author | Joe Millenbach <jmillenbach@gmail.com> | 2013-01-18 10:44:22 +0400 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2013-01-19 04:15:27 +0400 |
commit | 4f73bc4dd3e8563ef4109f293a092820dff66d92 (patch) | |
tree | 8ebd5d01abaceb70da1932db1a5e7219630b0fd3 | |
parent | a1bf9584429d61b7096f93ae09325e1ba538e9e8 (diff) |
tty: Added a CONFIG_TTY option to allow removal of TTY
The option allows you to remove TTY and compile without errors. This
saves space on systems that won't support TTY interfaces anyway.
bloat-o-meter output is below.
The bulk of this patch consists of Kconfig changes adding "depends on
TTY" to various serial devices and similar drivers that require the TTY
layer. Ideally, these dependencies would occur on a common intermediate
symbol such as SERIO, but most drivers "select SERIO" rather than
"depends on SERIO", and "select" does not respect dependencies.
bloat-o-meter output comparing our previous minimal to new minimal by
removing TTY. The list is filtered to not show removed entries with awk
'$3 != "-"' as the list was very long.
add/remove: 0/226 grow/shrink: 2/14 up/down: 6/-35356 (-35350)
function old new delta
chr_dev_init 166 170 +4
allow_signal 80 82 +2
static.__warned 143 142 -1
disallow_signal 63 62 -1
__set_special_pids 95 94 -1
unregister_console 126 121 -5
start_kernel 546 541 -5
register_console 593 588 -5
copy_from_user 45 40 -5
sys_setsid 128 120 -8
sys_vhangup 32 19 -13
do_exit 1543 1526 -17
bitmap_zero 60 40 -20
arch_local_irq_save 137 117 -20
release_task 674 652 -22
static.spin_unlock_irqrestore 308 260 -48
Signed-off-by: Joe Millenbach <jmillenbach@gmail.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
55 files changed, 165 insertions, 47 deletions
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index 9d5904cc7712..1ef196ddadeb 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -125,6 +125,7 @@ choice config ALPHA_GENERIC bool "Generic" + depends on TTY help A generic kernel will run on all supported Alpha hardware. @@ -491,6 +492,7 @@ config VGA_HOSE config ALPHA_SRM bool "Use SRM as bootloader" if ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_NAUTILUS || ALPHA_NONAME + depends on TTY default y if ALPHA_JENSEN || ALPHA_MIKASA || ALPHA_SABLE || ALPHA_LYNX || ALPHA_NORITAKE || ALPHA_DP264 || ALPHA_RAWHIDE || ALPHA_EIGER || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_MARVEL ---help--- There are two different types of booting firmware on Alphas: SRM, diff --git a/arch/ia64/hp/sim/Kconfig b/arch/ia64/hp/sim/Kconfig index 8d513a8c5266..d84707d55203 100644 --- a/arch/ia64/hp/sim/Kconfig +++ b/arch/ia64/hp/sim/Kconfig @@ -8,6 +8,7 @@ config HP_SIMETH config HP_SIMSERIAL bool "Simulated serial driver support" + depends on TTY config HP_SIMSERIAL_CONSOLE bool "Console for HP simulator" diff --git a/arch/m68k/Kconfig.devices b/arch/m68k/Kconfig.devices index c4cdfe444c64..4bc945dfe467 100644 --- a/arch/m68k/Kconfig.devices +++ b/arch/m68k/Kconfig.devices @@ -41,7 +41,7 @@ config NFBLOCK config NFCON tristate "NatFeat console driver" - depends on NATFEAT + depends on TTY && NATFEAT help Say Y to include support for the ARAnyM NatFeat console driver which allows the console output to be redirected to the stderr diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index b77feffbadea..df5beb639760 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -23,6 +23,7 @@ config PARISC select HAVE_MOD_ARCH_SPECIFIC select MODULES_USE_ELF_RELA select CLONE_BACKWARDS + select TTY # Needed for pdc_cons.c help The PA-RISC microprocessor is designed by Hewlett-Packard and used diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig index 875d008828b8..ae8a7ca67fa4 100644 --- a/arch/tile/Kconfig +++ b/arch/tile/Kconfig @@ -121,6 +121,7 @@ config DEBUG_COPY_FROM_USER def_bool n config HVC_TILE + depends on TTY select HVC_DRIVER def_bool y diff --git a/arch/um/Kconfig.common b/arch/um/Kconfig.common index 648121b037d5..bceee6623b00 100644 --- a/arch/um/Kconfig.common +++ b/arch/um/Kconfig.common @@ -12,6 +12,7 @@ config UML select GENERIC_CPU_DEVICES select GENERIC_IO select GENERIC_CLOCKEVENTS + select TTY # Needed for line.c config MMU bool diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index 5aab1acabf1c..ad64c73b8675 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -132,6 +132,7 @@ choice config XTENSA_PLATFORM_ISS bool "ISS" + depends on TTY select XTENSA_CALIBRATE_CCOUNT select SERIAL_CONSOLE select XTENSA_ISS_NETWORK diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig index e9f203eadb1f..fdfd61a2d523 100644 --- a/drivers/bluetooth/Kconfig +++ b/drivers/bluetooth/Kconfig @@ -26,6 +26,7 @@ config BT_HCIBTSDIO config BT_HCIUART tristate "HCI UART driver" + depends on TTY help Bluetooth HCI UART driver. This driver is required if you want to use Bluetooth devices with diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 72bedad6bf8c..3bb6fa3930be 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -53,7 +53,7 @@ source "drivers/tty/serial/Kconfig" config TTY_PRINTK bool "TTY driver to output user messages via printk" - depends on EXPERT + depends on EXPERT && TTY default n ---help--- If you say Y here, the support for writing user messages (i.e. @@ -159,7 +159,7 @@ source "drivers/tty/hvc/Kconfig" config VIRTIO_CONSOLE tristate "Virtio console" - depends on VIRTIO + depends on VIRTIO && TTY select HVC_DRIVER help Virtio console for use with lguest and other hypervisors. @@ -392,6 +392,7 @@ config XILINX_HWICAP config R3964 tristate "Siemens R3964 line discipline" + depends on TTY ---help--- This driver allows synchronous communication with devices using the Siemens R3964 packet protocol. Unless you are dealing with special @@ -439,7 +440,7 @@ source "drivers/char/pcmcia/Kconfig" config MWAVE tristate "ACP Modem (Mwave) support" - depends on X86 + depends on X86 && TTY select SERIAL_8250 ---help--- The ACP modem (Mwave) for Linux is a WinModem. It is composed of a diff --git a/drivers/char/pcmcia/Kconfig b/drivers/char/pcmcia/Kconfig index 6614416a8623..2a166d56738a 100644 --- a/drivers/char/pcmcia/Kconfig +++ b/drivers/char/pcmcia/Kconfig @@ -7,7 +7,7 @@ menu "PCMCIA character devices" config SYNCLINK_CS tristate "SyncLink PC Card support" - depends on PCMCIA + depends on PCMCIA && TTY help Enable support for the SyncLink PC Card serial adapter, running asynchronous and HDLC communications up to 512Kbps. The port is @@ -45,7 +45,7 @@ config CARDMAN_4040 config IPWIRELESS tristate "IPWireless 3G UMTS PCMCIA card support" - depends on PCMCIA && NETDEVICES + depends on PCMCIA && NETDEVICES && TTY select PPP help This is a driver for 3G UMTS PCMCIA card from IPWireless company. In diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index bdca5111eb9d..cf474b2df4ae 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -803,7 +803,7 @@ config I2C_PARPORT_LIGHT config I2C_TAOS_EVM tristate "TAOS evaluation module" - depends on EXPERIMENTAL + depends on EXPERIMENTAL && TTY select SERIO select SERIO_SERPORT default n diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig index 56eb471b5576..055bcaba774c 100644 --- a/drivers/input/joystick/Kconfig +++ b/drivers/input/joystick/Kconfig @@ -132,6 +132,8 @@ config JOYSTICK_TMDC source "drivers/input/joystick/iforce/Kconfig" +if TTY + config JOYSTICK_WARRIOR tristate "Logitech WingMan Warrior joystick" select SERIO @@ -205,6 +207,8 @@ config JOYSTICK_ZHENHUA To compile this driver as a module, choose M here: the module will be called zhenhua. +endif # TTY + config JOYSTICK_DB9 tristate "Multisystem, Sega Genesis, Saturn joysticks and gamepads" depends on PARPORT diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 5a240c60342d..008f96aaf19e 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -69,6 +69,7 @@ config KEYBOARD_ATARI config KEYBOARD_ATKBD tristate "AT keyboard" if EXPERT || !X86 default y + depends on TTY select SERIO select SERIO_LIBPS2 select SERIO_I8042 if X86 @@ -153,6 +154,7 @@ config KEYBOARD_BFIN config KEYBOARD_LKKBD tristate "DECstation/VAXstation LK201/LK401 keyboard" + depends on TTY select SERIO help Say Y here if you want to use a LK201 or LK401 style serial @@ -268,7 +270,7 @@ config KEYBOARD_HIL_OLD config KEYBOARD_HIL tristate "HP HIL keyboard/pointer support" - depends on GSC || HP300 + depends on (GSC || HP300) && TTY default y select HP_SDC select HIL_MLC @@ -400,6 +402,7 @@ config KEYBOARD_IMX config KEYBOARD_NEWTON tristate "Newton keyboard" + depends on TTY select SERIO help Say Y here if you have a Newton keyboard on a serial port. @@ -479,6 +482,8 @@ config KEYBOARD_SAMSUNG To compile this driver as a module, choose M here: the module will be called samsung-keypad. +if TTY + config KEYBOARD_STOWAWAY tristate "Stowaway keyboard" select SERIO @@ -501,6 +506,8 @@ config KEYBOARD_SUNKBD To compile this driver as a module, choose M here: the module will be called sunkbd. +endif # TTY + config KEYBOARD_SH_KEYSC tristate "SuperH KEYSC keypad support" depends on SUPERH || ARCH_SHMOBILE @@ -597,6 +604,7 @@ config KEYBOARD_TWL4030 config KEYBOARD_XTKBD tristate "XT keyboard" + depends on TTY select SERIO help Say Y here if you want to use the old IBM PC/XT keyboard (or diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig index cd6268cf7cd5..fc160f72dc4e 100644 --- a/drivers/input/mouse/Kconfig +++ b/drivers/input/mouse/Kconfig @@ -14,6 +14,7 @@ if INPUT_MOUSE config MOUSE_PS2 tristate "PS/2 mouse" + depends on TTY default y select SERIO select SERIO_LIBPS2 @@ -138,6 +139,7 @@ config MOUSE_PS2_OLPC config MOUSE_SERIAL tristate "Serial mouse" + depends on TTY select SERIO help Say Y here if you have a serial (RS-232, COM port) mouse connected @@ -262,6 +264,7 @@ config MOUSE_RISCPC config MOUSE_VSXXXAA tristate "DEC VSXXX-AA/GA mouse and VSXXX-AB tablet" + depends on TTY select SERIO help Say Y (or M) if you want to use a DEC VSXXX-AA (hockey diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig index 4a4e182c33e7..81ee7551148e 100644 --- a/drivers/input/serio/Kconfig +++ b/drivers/input/serio/Kconfig @@ -4,6 +4,7 @@ config SERIO tristate "Serial I/O support" if EXPERT || !X86 default y + depends on TTY help Say Yes here if you have any input device that uses serial I/O to communicate with the system. This includes the diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 515cfe790543..3d6f548dd3d4 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -192,6 +192,8 @@ config TOUCHSCREEN_DA9052 To compile this driver as a module, choose M here: the module will be called da9052_tsi. +if TTY + config TOUCHSCREEN_DYNAPRO tristate "Dynapro serial touchscreen" select SERIO @@ -216,6 +218,8 @@ config TOUCHSCREEN_HAMPSHIRE To compile this driver as a module, choose M here: the module will be called hampshire. +endif # TTY + config TOUCHSCREEN_EETI tristate "EETI touchscreen panel support" depends on I2C @@ -237,6 +241,7 @@ config TOUCHSCREEN_EGALAX config TOUCHSCREEN_FUJITSU tristate "Fujitsu serial touchscreen" + depends on TTY select SERIO help Say Y here if you have the Fujitsu touchscreen (such as one @@ -275,6 +280,8 @@ config TOUCHSCREEN_S3C2410 To compile this driver as a module, choose M here: the module will be called s3c2410_ts. +if TTY + config TOUCHSCREEN_GUNZE tristate "Gunze AHL-51S touchscreen" select SERIO @@ -311,6 +318,8 @@ config TOUCHSCREEN_WACOM_W8001 To compile this driver as a module, choose M here: the module will be called wacom_w8001. +endif # TTY + config TOUCHSCREEN_WACOM_I2C tristate "Wacom Tablet support (I2C)" depends on I2C @@ -369,6 +378,8 @@ config TOUCHSCREEN_MMS114 To compile this driver as a module, choose M here: the module will be called mms114. +if TTY + config TOUCHSCREEN_MTOUCH tristate "MicroTouch serial touchscreens" select SERIO @@ -393,6 +404,8 @@ config TOUCHSCREEN_INEXIO To compile this driver as a module, choose M here: the module will be called inexio. +endif # TTY + config TOUCHSCREEN_INTEL_MID tristate "Intel MID platform resistive touchscreen" depends on INTEL_SCU_IPC @@ -450,6 +463,7 @@ config TOUCHSCREEN_HTCPEN config TOUCHSCREEN_PENMOUNT tristate "Penmount serial touchscreen" + depends on TTY select SERIO help Say Y here if you have a Penmount serial touchscreen connected to @@ -493,6 +507,8 @@ config TOUCHSCREEN_TNETV107X To compile this driver as a module, choose M here: the module will be called tnetv107x-ts. +if TTY + config TOUCHSCREEN_TOUCHRIGHT tristate "Touchright serial touchscreen" select SERIO @@ -517,6 +533,8 @@ config TOUCHSCREEN_TOUCHWIN To compile this driver as a module, choose M here: the module will be called touchwin. +endif # TTY + config TOUCHSCREEN_TI_AM335X_TSC tristate "TI Touchscreen Interface" depends on MFD_TI_AM335X_TSCADC @@ -790,6 +808,8 @@ config TOUCHSCREEN_USB_EASYTOUCH Say Y here if you have an EasyTouch USB Touch controller. If unsure, say N. +if TTY + config TOUCHSCREEN_TOUCHIT213 tristate "Sahara TouchIT-213 touchscreen" select SERIO @@ -813,6 +833,8 @@ config TOUCHSCREEN_TSC_SERIO To compile this driver as a module, choose M here: the module will be called tsc40. +endif # TTY + config TOUCHSCREEN_TSC2005 tristate "TSC2005 based touchscreens" depends on SPI_MASTER && GENERIC_HARDIRQS diff --git a/drivers/ipack/devices/Kconfig b/drivers/ipack/devices/Kconfig index 0b82fdc198c0..907a8cb48f2a 100644 --- a/drivers/ipack/devices/Kconfig +++ b/drivers/ipack/devices/Kconfig @@ -1,6 +1,6 @@ config SERIAL_IPOCTAL tristate "IndustryPack IP-OCTAL uart support" - depends on IPACK_BUS + depends on IPACK_BUS && TTY help This driver supports the IPOCTAL serial port device for the IndustryPack bus. default n diff --git a/drivers/isdn/Kconfig b/drivers/isdn/Kconfig index 86cd75a0e84d..ef661acdda17 100644 --- a/drivers/isdn/Kconfig +++ b/drivers/isdn/Kconfig @@ -22,6 +22,7 @@ if ISDN menuconfig ISDN_I4L tristate "Old ISDN4Linux (deprecated)" + depends on TTY ---help--- This driver allows you to use an ISDN adapter for networking connections and as dialin/out device. The isdn-tty's have a built diff --git a/drivers/isdn/capi/Kconfig b/drivers/isdn/capi/Kconfig index 15c3ffd9d860..f04686580040 100644 --- a/drivers/isdn/capi/Kconfig +++ b/drivers/isdn/capi/Kconfig @@ -18,6 +18,7 @@ config CAPI_TRACE config ISDN_CAPI_MIDDLEWARE bool "CAPI2.0 Middleware support" + depends on TTY help This option will enhance the capabilities of the /dev/capi20 interface. It will provide a means of moving a data connection, diff --git a/drivers/isdn/gigaset/Kconfig b/drivers/isdn/gigaset/Kconfig index b18a92c32184..dde5e09e6267 100644 --- a/drivers/isdn/gigaset/Kconfig +++ b/drivers/isdn/gigaset/Kconfig @@ -1,5 +1,6 @@ menuconfig ISDN_DRV_GIGASET tristate "Siemens Gigaset support" + depends on TTY select CRC_CCITT select BITREVERSE help diff --git a/drivers/isdn/hardware/mISDN/Kconfig b/drivers/isdn/hardware/mISDN/Kconfig index eadc1cd34a20..b8611e3e5e74 100644 --- a/drivers/isdn/hardware/mISDN/Kconfig +++ b/drivers/isdn/hardware/mISDN/Kconfig @@ -76,6 +76,7 @@ config MISDN_NETJET tristate "Support for NETJet cards" depends on MISDN depends on PCI + depends on TTY select MISDN_IPAC select ISDN_HDLC select ISDN_I4L diff --git a/drivers/lguest/Kconfig b/drivers/lguest/Kconfig index 34ae49dc557c..f9c43145a611 100644 --- a/drivers/lguest/Kconfig +++ b/drivers/lguest/Kconfig @@ -1,6 +1,6 @@ config LGUEST tristate "Linux hypervisor example code" - depends on X86_32 && EXPERIMENTAL && EVENTFD + depends on X86_32 && EXPERIMENTAL && EVENTFD && TTY select HVC_DRIVER ---help--- This is a very simple module which allows you to run diff --git a/drivers/media/radio/wl128x/Kconfig b/drivers/media/radio/wl128x/Kconfig index ea1e6545df36..f359be7e9dd9 100644 --- a/drivers/media/radio/wl128x/Kconfig +++ b/drivers/media/radio/wl128x/Kconfig @@ -4,7 +4,7 @@ menu "Texas Instruments WL128x FM driver (ST based)" config RADIO_WL128X tristate "Texas Instruments WL128x FM Radio" - depends on VIDEO_V4L2 && RFKILL && GPIOLIB + depends on VIDEO_V4L2 && RFKILL && GPIOLIB && TTY select TI_ST if NET help Choose Y here if you have this FM radio chip. diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index b151b7c1bd59..4b2bb939dde1 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -127,7 +127,7 @@ config PHANTOM config INTEL_MID_PTI tristate "Parallel Trace Interface for MIPI P1149.7 cJTAG standard" - depends on PCI + depends on PCI && TTY default n help The PTI (Parallel Trace Interface) driver directs diff --git a/drivers/misc/ti-st/Kconfig b/drivers/misc/ti-st/Kconfig index abb5de1afce3..f34dcc514730 100644 --- a/drivers/misc/ti-st/Kconfig +++ b/drivers/misc/ti-st/Kconfig @@ -5,7 +5,7 @@ menu "Texas Instruments shared transport line discipline" config TI_ST tristate "Shared transport core driver" - depends on NET && GPIOLIB + depends on NET && GPIOLIB && TTY select FW_LOADER help This enables the shared transport core driver for TI diff --git a/drivers/mmc/card/Kconfig b/drivers/mmc/card/Kconfig index 3b1f783bf924..5562308699bc 100644 --- a/drivers/mmc/card/Kconfig +++ b/drivers/mmc/card/Kconfig @@ -52,6 +52,7 @@ config MMC_BLOCK_BOUNCE config SDIO_UART tristate "SDIO UART/GPS class support" + depends on TTY help SDIO function driver for SDIO cards that implements the UART class, as well as the GPS class which appears like a UART. diff --git a/drivers/net/caif/Kconfig b/drivers/net/caif/Kconfig index abf4d7a9dcce..60c2142373c9 100644 --- a/drivers/net/caif/Kconfig +++ b/drivers/net/caif/Kconfig @@ -6,7 +6,7 @@ comment "CAIF transport drivers" config CAIF_TTY tristate "CAIF TTY transport driver" - depends on CAIF + depends on CAIF && TTY default n ---help--- The CAIF TTY transport driver is a Line Discipline (ldisc) diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig index b56bd9e80957..72df3a306a08 100644 --- a/drivers/net/can/Kconfig +++ b/drivers/net/can/Kconfig @@ -13,7 +13,7 @@ config CAN_VCAN config CAN_SLCAN tristate "Serial / USB serial CAN Adaptors (slcan)" - depends on CAN + depends on CAN && TTY ---help--- CAN driver for several 'low cost' CAN interfaces that are attached via serial lines or via USB-to-serial adapters using the LAWICEL diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig index 95dbcfdf131d..bf5e59687680 100644 --- a/drivers/net/hamradio/Kconfig +++ b/drivers/net/hamradio/Kconfig @@ -1,6 +1,6 @@ config MKISS tristate "Serial port KISS driver" - depends on AX25 + depends on AX25 && TTY select CRC16 ---help--- KISS is a protocol used for the exchange of data between a computer @@ -18,7 +18,7 @@ config MKISS config 6PACK tristate "Serial port 6PACK driver" - depends on AX25 + depends on AX25 && TTY ---help--- 6pack is a transmission protocol for the data exchange between your PC and your TNC (the Terminal Node Controller acts as a kind of diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig index 595205406d73..e1454cdec14b 100644 --- a/drivers/net/irda/Kconfig +++ b/drivers/net/irda/Kconfig @@ -5,7 +5,7 @@ comment "SIR device drivers" config IRTTY_SIR tristate "IrTTY (uses Linux serial driver)" - depends on IRDA + depends on IRDA && TTY help Say Y here if you want to build support for the IrTTY line discipline. To compile it as a module, choose M here: the module diff --git a/drivers/net/ppp/Kconfig b/drivers/net/ppp/Kconfig index 872df3ef07a6..3d9ef4f1e600 100644 --- a/drivers/net/ppp/Kconfig +++ b/drivers/net/ppp/Kconfig @@ -147,6 +147,7 @@ config PPPOL2TP Support for PPP-over-L2TP socket family. L2TP is a protocol used by ISPs and enterprises to tunnel PPP traffic over UDP tunnels. L2TP is replacing PPTP for VPN uses. +if TTY config PPP_ASYNC tristate "PPP support for async serial ports" @@ -172,4 +173,6 @@ config PPP_SYNC_TTY To compile this driver as a module, choose M here. +endif # TTY + endif # PPP diff --git a/drivers/net/slip/Kconfig b/drivers/net/slip/Kconfig index 211b160e4e9c..48e68714eef3 100644 --- a/drivers/net/slip/Kconfig +++ b/drivers/net/slip/Kconfig @@ -4,6 +4,7 @@ config SLIP tristate "SLIP (serial line) support" + depends on TTY ---help--- Say Y if you intend to use SLIP or CSLIP (compressed SLIP) to connect to your Internet service provider or to connect to some diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig index ef976215b649..bd33153261ce 100644 --- a/drivers/net/usb/Kconfig +++ b/drivers/net/usb/Kconfig @@ -445,7 +445,7 @@ config USB_NET_QMI_WWAN config USB_HSO tristate "Option USB High Speed Mobile Devices" - depends on USB && RFKILL + depends on USB && RFKILL && TTY default n help Choose this option if you have an Option HSDPA/HSUPA card. @@ -493,7 +493,7 @@ config USB_SIERRA_NET config USB_VL600 tristate "LG VL600 modem dongle" - depends on USB_NET_CDCETHER + depends on USB_NET_CDCETHER && TTY select USB_ACM help Select this if you want to use an LG Electronics 4G/LTE usb modem diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig index d58431e99f73..61eb8994b34f 100644 --- a/drivers/net/wan/Kconfig +++ b/drivers/net/wan/Kconfig @@ -429,7 +429,7 @@ config LAPBETHER config X25_ASY tristate "X.25 async driver (EXPERIMENTAL)" - depends on LAPB && X25 + depends on LAPB && X25 && TTY ---help--- Send and receive X.25 frames over regular asynchronous serial lines such as telephone lines equipped with ordinary modems. diff --git a/drivers/pps/clients/Kconfig b/drivers/pps/clients/Kconfig index 445197d4a8c4..6efd9b60d8ff 100644 --- a/drivers/pps/clients/Kconfig +++ b/drivers/pps/clients/Kconfig @@ -17,7 +17,7 @@ config PPS_CLIENT_KTIMER config PPS_CLIENT_LDISC tristate "PPS line discipline" - depends on PPS + depends on PPS && TTY help If you say yes here you get support for a PPS source connected with the CD (Carrier Detect) pin of your serial port. diff --git a/drivers/s390/char/Kconfig b/drivers/s390/char/Kconfig index 2c9a776bd63c..71bf959732fe 100644 --- a/drivers/s390/char/Kconfig +++ b/drivers/s390/char/Kconfig @@ -11,7 +11,7 @@ config TN3270 config TN3270_TTY def_tristate y prompt "Support for tty input/output on 3270 terminals" - depends on TN3270 + depends on TN3270 && TTY help Include support for using an IBM 3270 terminal as a Linux tty. @@ -33,7 +33,7 @@ config TN3270_CONSOLE config TN3215 def_bool y prompt "Support for 3215 line mode terminal" - depends on CCW + depends on CCW && TTY help Include support for IBM 3215 line-mode terminals. @@ -51,7 +51,7 @@ config CCW_CONSOLE config SCLP_TTY def_bool y prompt "Support for SCLP line mode terminal" - depends on S390 + depends on S390 && TTY help Include support for IBM SCLP line-mode terminals. @@ -66,7 +66,7 @@ config SCLP_CONSOLE config SCLP_VT220_TTY def_bool y prompt "Support for SCLP VT220-compatible terminal" - depends on S390 + depends on S390 && TTY help Include support for an IBM SCLP VT220-compatible terminal. diff --git a/drivers/staging/ccg/Kconfig b/drivers/staging/ccg/Kconfig index 8997a8c757aa..7ed5bc6caadb 100644 --- a/drivers/staging/ccg/Kconfig +++ b/drivers/staging/ccg/Kconfig @@ -2,7 +2,7 @@ if USB_GADGET config USB_G_CCG tristate "Configurable Composite Gadget (STAGING)" - depends on STAGING && BLOCK && NET && !USB_ZERO && !USB_ZERO_HNPTEST && !USB_AUDIO && !GADGET_UAC1 && !USB_ETH && !USB_ETH_RNDIS && !USB_ETH_EEM && !USB_G_NCM && !USB_GADGETFS && !USB_FUNCTIONFS && !USB_FUNCTIONFS_ETH && !USB_FUNCTIONFS_RNDIS && !USB_FUNCTIONFS_GENERIC && !USB_FILE_STORAGE && !USB_FILE_STORAGE_TEST && !USB_MASS_STORAGE && !USB_G_SERIAL && !USB_MIDI_GADGET && !USB_G_PRINTER && !USB_CDC_COMPOSITE && !USB_G_NOKIA && !USB_G_ACM_MS && !USB_G_MULTI && !USB_G_MULTI_RNDIS && !USB_G_MULTI_CDC && !USB_G_HID && !USB_G_DBGP && !USB_G_WEBCAM + depends on STAGING && BLOCK && NET && !USB_ZERO && !USB_ZERO_HNPTEST && !USB_AUDIO && !GADGET_UAC1 && !USB_ETH && !USB_ETH_RNDIS && !USB_ETH_EEM && !USB_G_NCM && !USB_GADGETFS && !USB_FUNCTIONFS && !USB_FUNCTIONFS_ETH && !USB_FUNCTIONFS_RNDIS && !USB_FUNCTIONFS_GENERIC && !USB_FILE_STORAGE && !USB_FILE_STORAGE_TEST && !USB_MASS_STORAGE && !USB_G_SERIAL && !USB_MIDI_GADGET && !USB_G_PRINTER && !USB_CDC_COMPOSITE && !USB_G_NOKIA && !USB_G_ACM_MS && !USB_G_MULTI && !USB_G_MULTI_RNDIS && !USB_G_MULTI_CDC && !USB_G_HID && !USB_G_DBGP && !USB_G_WEBCAM && TTY help The Configurable Composite Gadget supports multiple USB functions: acm, mass storage, rndis and FunctionFS. diff --git a/drivers/staging/dgrp/Kconfig b/drivers/staging/dgrp/Kconfig index 39f4bb65ec83..e4c41552923a 100644 --- a/drivers/staging/dgrp/Kconfig +++ b/drivers/staging/dgrp/Kconfig @@ -1,7 +1,7 @@ config DGRP tristate "Digi Realport driver" default n - depends on SYSFS + depends on SYSFS && TTY ---help--- Support for Digi Realport devices. These devices allow you to access remote serial ports as if they are local tty devices. This diff --git a/drivers/staging/fwserial/Kconfig b/drivers/staging/fwserial/Kconfig index 580406cb1808..9cdb3cdc4b66 100644 --- a/drivers/staging/fwserial/Kconfig +++ b/drivers/staging/fwserial/Kconfig @@ -1,6 +1,6 @@ config FIREWIRE_SERIAL tristate "TTY over Firewire" - depends on FIREWIRE + depends on FIREWIRE && TTY help This enables TTY over IEEE 1394, providing high-speed serial connectivity to cabled peers. diff --git a/drivers/staging/sb105x/Kconfig b/drivers/staging/sb105x/Kconfig index 3d0d0eb95b8c..6a2e1b78e844 100644 --- a/drivers/staging/sb105x/Kconfig +++ b/drivers/staging/sb105x/Kconfig @@ -1,7 +1,7 @@ config SB105X tristate "SystemBase PCI Multiport UART" select SERIAL_CORE - depends on PCI && BROKEN + depends on PCI && TTY && BROKEN help A driver for the SystemBase Multi-2/PCI serial card diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig index 0ecf22b6a38e..a79fd8ebd56e 100644 --- a/drivers/tty/Kconfig +++ b/drivers/tty/Kconfig @@ -1,3 +1,14 @@ +config TTY + bool "Enable TTY" if EXPERT + default y + ---help--- + Allows you to remove TTY support which can save space, and + blocks features that require TTY from inclusion in the kernel. + TTY is required for any text terminals or serial port + communication. Most users should leave this enabled. + +if TTY + config VT bool "Virtual terminal" if EXPERT depends on !S390 && !UML @@ -388,3 +399,5 @@ config PPC_EARLY_DEBUG_EHV_BC_HANDLE If the number you specify is not a valid byte channel handle, then there simply will be no early console output. This is true also if you don't boot under a hypervisor at all. + +endif # TTY diff --git a/drivers/tty/Makefile b/drivers/tty/Makefile index 2953059530e4..df5663d0d55e 100644 --- a/drivers/tty/Makefile +++ b/drivers/tty/Makefile @@ -1,4 +1,4 @@ -obj-y += tty_io.o n_tty.o tty_ioctl.o tty_ldisc.o \ +obj-$(CONFIG_TTY) += tty_io.o n_tty.o tty_ioctl.o tty_ldisc.o \ tty_buffer.o tty_port.o tty_mutex.o obj-$(CONFIG_LEGACY_PTYS) += pty.o obj-$(CONFIG_UNIX98_PTYS) += pty.o diff --git a/drivers/tty/hvc/Kconfig b/drivers/tty/hvc/Kconfig index f47b734c6a7a..8902f9b4df71 100644 --- a/drivers/tty/hvc/Kconfig +++ b/drivers/tty/hvc/Kconfig @@ -1,3 +1,5 @@ +if TTY + config HVC_DRIVER bool help @@ -119,3 +121,4 @@ config HVCS which will also be compiled when this driver is built as a module. +endif # TTY diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 2dc429357fe3..e9aeccdfbe35 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -2,6 +2,8 @@ # Serial device configuration # +if TTY + menu "Serial drivers" depends on HAS_IOMEM @@ -1483,3 +1485,5 @@ config SERIAL_RP2_NR_UARTS need to be increased. endmenu + +endif # TTY diff --git a/drivers/usb/class/Kconfig b/drivers/usb/class/Kconfig index 2519e320098f..316aac8e4ca1 100644 --- a/drivers/usb/class/Kconfig +++ b/drivers/usb/class/Kconfig @@ -6,7 +6,7 @@ comment "USB Device Class drivers" config USB_ACM tristate "USB Modem (CDC ACM) support" - depends on USB + depends on USB && TTY ---help--- This driver supports USB modems and ISDN adapters which support the Communication Device Class Abstract Control Model interface. diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 14625fd2cecd..a1bd951f9cb7 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -750,6 +750,7 @@ config USB_GADGET_TARGET config USB_G_SERIAL tristate "Serial Gadget (with CDC ACM and CDC OBEX support)" + depends on TTY select USB_LIBCOMPOSITE help The Serial Gadget talks to the Linux-USB generic serial driver. @@ -799,6 +800,8 @@ config USB_G_PRINTER For more information, see Documentation/usb/gadget_printer.txt which includes sample code for accessing the device file. +if TTY + config USB_CDC_COMPOSITE tristate "CDC Composite Device (Ethernet and ACM)" depends on NET @@ -879,6 +882,8 @@ config USB_G_MULTI_CDC If unsure, say "y". +endif # TTY + config USB_G_HID tristate "HID Gadget" select USB_LIBCOMPOSITE @@ -895,6 +900,7 @@ config USB_G_HID # Standalone / single function gadgets config USB_G_DBGP tristate "EHCI Debug Device Gadget" + depends on TTY select USB_LIBCOMPOSITE help This gadget emulates an EHCI Debug device. This is useful when you want diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index 76f462241738..d8e35fe30b0c 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -4,7 +4,7 @@ menuconfig USB_SERIAL tristate "USB Serial Converter support" - depends on USB + depends on USB && TTY ---help--- Say Y here if you have a USB device that provides normal serial ports, or acts like a serial device, and you want to connect it to diff --git a/fs/proc/Makefile b/fs/proc/Makefile index 981b05601931..712f24db9600 100644 --- a/fs/proc/Makefile +++ b/fs/proc/Makefile @@ -8,7 +8,8 @@ proc-y := nommu.o task_nommu.o proc-$(CONFIG_MMU) := mmu.o task_mmu.o proc-y += inode.o root.o base.o generic.o array.o \ - proc_tty.o fd.o + fd.o +proc-$(CONFIG_TTY) += proc_tty.o proc-y += cmdline.o proc-y += consoles.o proc-y += cpuinfo.o diff --git a/include/linux/console.h b/include/linux/console.h index dedb082fe50f..3b709da1786e 100644 --- a/include/linux/console.h +++ b/include/linux/console.h @@ -157,7 +157,12 @@ extern int is_console_locked(void); extern int braille_register_console(struct console *, int index, char *console_options, char *braille_options); extern int braille_unregister_console(struct console *); +#ifdef CONFIG_TTY extern void console_sysfs_notify(void); +#else +static inline void console_sysfs_notify(void) +{ } +#endif extern bool console_suspend_enabled; /* Suspend and resume console messages over PM events */ diff --git a/include/linux/proc_fs.h b/include/linux/proc_fs.h index 32676b35d2f5..3c22538aab66 100644 --- a/include/linux/proc_fs.h +++ b/include/linux/proc_fs.h @@ -127,7 +127,12 @@ extern void pid_ns_release_proc(struct pid_namespace *ns); * proc_tty.c */ struct tty_driver; +#ifdef CONFIG_TTY extern void proc_tty_init(void); +#else +static inline void proc_tty_init(void) +{ } +#endif extern void proc_tty_register_driver(struct tty_driver *driver); extern void proc_tty_unregister_driver(struct tty_driver *driver); diff --git a/include/linux/tty.h b/include/linux/tty.h index f89acd1ed6d3..c75d886b0307 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -318,11 +318,43 @@ struct tty_file_private { #define TTY_WRITE_FLUSH(tty) tty_write_flush((tty)) +#ifdef CONFIG_TTY +extern void console_init(void); +extern void tty_kref_put(struct tty_struct *tty); +extern struct pid *tty_get_pgrp(struct tty_struct *tty); +extern void tty_vhangup_self(void); +extern void disassociate_ctty(int priv); +extern dev_t tty_devnum(struct tty_struct *tty); +extern void proc_clear_tty(struct task_struct *p); +extern struct tty_struct *get_current_tty(void); +/* tty_io.c */ +extern int __init tty_init(void); +#else +static inline void console_init(void) +{ } +static inline void tty_kref_put(struct tty_struct *tty) +{ } +static inline struct pid *tty_get_pgrp(struct tty_struct *tty) +{ return NULL; } +static inline void tty_vhangup_self(void) +{ } +static inline void disassociate_ctty(int priv) +{ } +static inline dev_t tty_devnum(struct tty_struct *tty) +{ return 0; } +static inline void proc_clear_tty(struct task_struct *p) +{ } +static inline struct tty_struct *get_current_tty(void) +{ return NULL; } +/* tty_io.c */ +static inline int __init tty_init(void) +{ return 0; } +#endif + extern void tty_write_flush(struct tty_struct *); extern struct ktermios tty_std_termios; -extern void console_init(void); extern int vcs_init(void); extern struct class *tty_class; @@ -342,7 +374,6 @@ static inline struct tty_struct *tty_kref_get(struct tty_struct *tty) kref_get(&tty->kref); return tty; } -extern void tty_kref_put(struct tty_struct *tty); extern int tty_paranoia_check(struct tty_struct *tty, struct inode *inode, const char *routine); @@ -374,18 +405,15 @@ extern void tty_driver_remove_tty(struct tty_driver *driver, struct tty_struct *tty); extern void tty_free_termios(struct tty_struct *tty); extern int is_current_pgrp_orphaned(void); -extern struct pid *tty_get_pgrp(struct tty_struct *tty); extern int is_ignored(int sig); extern int tty_signal(int sig, struct tty_struct *tty); extern void tty_hangup(struct tty_struct *tty); extern void tty_vhangup(struct tty_struct *tty); extern void tty_vhangup_locked(struct tty_struct *tty); -extern void tty_vhangup_self(void); extern void tty_unhangup(struct file *filp); extern int tty_hung_up_p(struct file *filp); extern void do_SAK(struct tty_struct *tty); extern void __do_SAK(struct tty_struct *tty); -extern void disassociate_ctty(int priv); extern void no_tty(void); extern void tty_flush_to_ldisc(struct tty_struct *tty); extern void tty_buffer_free_all(struct tty_port *port); @@ -415,9 +443,6 @@ extern long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg); extern int tty_mode_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); extern int tty_perform_flush(struct tty_struct *tty, unsigned long arg); -extern dev_t tty_devnum(struct tty_struct *tty); -extern void proc_clear_tty(struct task_struct *p); -extern struct tty_struct *get_current_tty(void); extern void tty_default_fops(struct file_operations *fops); extern struct tty_struct *alloc_tty_struct(void); extern int tty_alloc_file(struct file *file); @@ -543,9 +568,6 @@ static inline int tty_audit_push_task(struct task_struct *tsk, } #endif -/* tty_io.c */ -extern int __init tty_init(void); - /* tty_ioctl.c */ extern int n_tty_ioctl_helper(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); diff --git a/lib/Kconfig.kgdb b/lib/Kconfig.kgdb index 43cb93fa2651..30894fab84d6 100644 --- a/lib/Kconfig.kgdb +++ b/lib/Kconfig.kgdb @@ -22,6 +22,7 @@ config KGDB_SERIAL_CONSOLE tristate "KGDB: use kgdb over the serial console" select CONSOLE_POLL select MAGIC_SYSRQ + depends on TTY default y help Share a serial console with kgdb. Sysrq-g must be used diff --git a/net/bluetooth/rfcomm/Kconfig b/net/bluetooth/rfcomm/Kconfig index 22e718b554e4..18d352ea2bc7 100644 --- a/net/bluetooth/rfcomm/Kconfig +++ b/net/bluetooth/rfcomm/Kconfig @@ -12,6 +12,7 @@ config BT_RFCOMM config BT_RFCOMM_TTY bool "RFCOMM TTY support" depends on BT_RFCOMM + depends on TTY help This option enables TTY emulation support for RFCOMM channels. diff --git a/net/irda/ircomm/Kconfig b/net/irda/ircomm/Kconfig index 2d4c6b4a78d6..19492c1707b7 100644 --- a/net/irda/ircomm/Kconfig +++ b/net/irda/ircomm/Kconfig @@ -1,6 +1,6 @@ config IRCOMM tristate "IrCOMM protocol" - depends on IRDA + depends on IRDA && TTY help Say Y here if you want to build support for the IrCOMM protocol. To compile it as modules, choose M here: the modules will be diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 3a847828932a..298822c0ad65 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -34,7 +34,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_CS42L73 if I2C select SND_SOC_CS4270 if I2C select SND_SOC_CS4271 if SND_SOC_I2C_AND_SPI - select SND_SOC_CX20442 + select SND_SOC_CX20442 if TTY select SND_SOC_DA7210 if I2C select SND_SOC_DA732X if I2C select SND_SOC_DA9055 if I2C @@ -236,6 +236,7 @@ config SND_SOC_CS4271 config SND_SOC_CX20442 tristate + depends on TTY config SND_SOC_JZ4740_CODEC select REGMAP_MMIO |