spi: Get rid of the spi_flash_read() API

This API has been replaced by the spi_mem_xx() one, its only user
(spi-nor) has been converted to spi_mem_xx() and all SPI controller
drivers that were implementing the ->spi_flash_xxx() hooks are also
implementing the spi_mem ones. So we can safely get rid of this API.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@exceet.de>
Tested-by: Frieder Schrempf <frieder.schrempf@exceet.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

3 files changed, 0 insertions, 151 deletions

diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c
index 1b12c2ff8be3..c54b760e00ed 100644
--- a/drivers/spi/spi-ti-qspi.c
+++ b/drivers/spi/spi-ti-qspi.c
@@ -531,44 +531,6 @@ static void ti_qspi_setup_mmap_read(struct spi_device *spi, u8 opcode,
 		      QSPI_SPI_SETUP_REG(spi->chip_select));
 }
 
-static bool ti_qspi_spi_flash_can_dma(struct spi_device *spi,
-				      struct spi_flash_read_message *msg)
-{
-	return virt_addr_valid(msg->buf);
-}
-
-static int ti_qspi_spi_flash_read(struct spi_device *spi,
-				  struct spi_flash_read_message *msg)
-{
-	struct ti_qspi *qspi = spi_master_get_devdata(spi->master);
-	int ret = 0;
-
-	mutex_lock(&qspi->list_lock);
-
-	if (!qspi->mmap_enabled)
-		ti_qspi_enable_memory_map(spi);
-	ti_qspi_setup_mmap_read(spi, msg->read_opcode, msg->data_nbits,
-				msg->addr_width, msg->dummy_bytes);
-
-	if (qspi->rx_chan) {
-		if (msg->cur_msg_mapped)
-			ret = ti_qspi_dma_xfer_sg(qspi, msg->rx_sg, msg->from);
-		else
-			ret = ti_qspi_dma_bounce_buffer(qspi, msg->from,
-							msg->buf, msg->len);
-		if (ret)
-			goto err_unlock;
-	} else {
-		memcpy_fromio(msg->buf, qspi->mmap_base + msg->from, msg->len);
-	}
-	msg->retlen = msg->len;
-
-err_unlock:
-	mutex_unlock(&qspi->list_lock);
-
-	return ret;
-}
-
 static int ti_qspi_exec_mem_op(struct spi_mem *mem,
 			       const struct spi_mem_op *op)
 {
@@ -727,7 +689,6 @@ static int ti_qspi_probe(struct platform_device *pdev)
 	master->dev.of_node = pdev->dev.of_node;
 	master->bits_per_word_mask = SPI_BPW_MASK(32) | SPI_BPW_MASK(16) |
 				     SPI_BPW_MASK(8);
-	master->spi_flash_read = ti_qspi_spi_flash_read;
 	master->mem_ops = &ti_qspi_mem_ops;
 
 	if (!of_property_read_u32(np, "num-cs", &num_cs))
@@ -827,7 +788,6 @@ static int ti_qspi_probe(struct platform_device *pdev)
 		dma_release_channel(qspi->rx_chan);
 		goto no_dma;
 	}
-	master->spi_flash_can_dma = ti_qspi_spi_flash_can_dma;
 	master->dma_rx = qspi->rx_chan;
 	init_completion(&qspi->transfer_complete);
 	if (res_mmap)
@@ -841,7 +801,6 @@ no_dma:
 				 "mmap failed with error %ld using PIO mode\n",
 				 PTR_ERR(qspi->mmap_base));
 			qspi->mmap_base = NULL;
-			master->spi_flash_read = NULL;
 			master->mem_ops = NULL;
 		}
 	}
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index c85b0cf7b4a9..8ee1ba13eb23 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -3055,63 +3055,6 @@ int spi_async_locked(struct spi_device *spi, struct spi_message *message)
 }
 EXPORT_SYMBOL_GPL(spi_async_locked);
 
-
-int spi_flash_read(struct spi_device *spi,
-		   struct spi_flash_read_message *msg)
-
-{
-	struct spi_controller *master = spi->controller;
-	struct device *rx_dev = NULL;
-	int ret;
-
-	if ((msg->opcode_nbits == SPI_NBITS_DUAL ||
-	     msg->addr_nbits == SPI_NBITS_DUAL) &&
-	    !(spi->mode & (SPI_TX_DUAL | SPI_TX_QUAD)))
-		return -EINVAL;
-	if ((msg->opcode_nbits == SPI_NBITS_QUAD ||
-	     msg->addr_nbits == SPI_NBITS_QUAD) &&
-	    !(spi->mode & SPI_TX_QUAD))
-		return -EINVAL;
-	if (msg->data_nbits == SPI_NBITS_DUAL &&
-	    !(spi->mode & (SPI_RX_DUAL | SPI_RX_QUAD)))
-		return -EINVAL;
-	if (msg->data_nbits == SPI_NBITS_QUAD &&
-	    !(spi->mode &  SPI_RX_QUAD))
-		return -EINVAL;
-
-	if (master->auto_runtime_pm) {
-		ret = pm_runtime_get_sync(master->dev.parent);
-		if (ret < 0) {
-			dev_err(&master->dev, "Failed to power device: %d\n",
-				ret);
-			return ret;
-		}
-	}
-
-	mutex_lock(&master->bus_lock_mutex);
-	mutex_lock(&master->io_mutex);
-	if (master->dma_rx && master->spi_flash_can_dma(spi, msg)) {
-		rx_dev = master->dma_rx->device->dev;
-		ret = spi_map_buf(master, rx_dev, &msg->rx_sg,
-				  msg->buf, msg->len,
-				  DMA_FROM_DEVICE);
-		if (!ret)
-			msg->cur_msg_mapped = true;
-	}
-	ret = master->spi_flash_read(spi, msg);
-	if (msg->cur_msg_mapped)
-		spi_unmap_buf(master, rx_dev, &msg->rx_sg,
-			      DMA_FROM_DEVICE);
-	mutex_unlock(&master->io_mutex);
-	mutex_unlock(&master->bus_lock_mutex);
-
-	if (master->auto_runtime_pm)
-		pm_runtime_put(master->dev.parent);
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(spi_flash_read);
-
 /*-------------------------------------------------------------------------*/
 
 /* Utility methods for SPI protocol drivers, layered on
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index a7e0bbed738c..a64235e05321 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -26,7 +26,6 @@ struct dma_chan;
 struct property_entry;
 struct spi_controller;
 struct spi_transfer;
-struct spi_flash_read_message;
 struct spi_controller_mem_ops;
 
 /*
@@ -382,11 +381,6 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv)
  *	     controller has native support for memory like operations.
  * @unprepare_message: undo any work done by prepare_message().
  * @slave_abort: abort the ongoing transfer request on an SPI slave controller
- * @spi_flash_read: to support spi-controller hardwares that provide
- *                  accelerated interface to read from flash devices.
- * @spi_flash_can_dma: analogous to can_dma() interface, but for
- *		       controllers implementing spi_flash_read.
- * @flash_read_supported: spi device supports flash read
  * @cs_gpios: Array of GPIOs to use as chip select lines; one per CS
  *	number. Any individual value may be -ENOENT for CS lines that
  *	are not GPIOs (driven by the SPI controller itself).
@@ -552,11 +546,6 @@ struct spi_controller {
 	int (*unprepare_message)(struct spi_controller *ctlr,
 				 struct spi_message *message);
 	int (*slave_abort)(struct spi_controller *ctlr);
-	int (*spi_flash_read)(struct  spi_device *spi,
-			      struct spi_flash_read_message *msg);
-	bool (*spi_flash_can_dma)(struct spi_device *spi,
-				  struct spi_flash_read_message *msg);
-	bool (*flash_read_supported)(struct spi_device *spi);
 
 	/*
 	 * These hooks are for drivers that use a generic implementation
@@ -1190,48 +1179,6 @@ static inline ssize_t spi_w8r16be(struct spi_device *spi, u8 cmd)
 	return be16_to_cpu(result);
 }
 
-/**
- * struct spi_flash_read_message - flash specific information for
- * spi-masters that provide accelerated flash read interfaces
- * @buf: buffer to read data
- * @from: offset within the flash from where data is to be read
- * @len: length of data to be read
- * @retlen: actual length of data read
- * @read_opcode: read_opcode to be used to communicate with flash
- * @addr_width: number of address bytes
- * @dummy_bytes: number of dummy bytes
- * @opcode_nbits: number of lines to send opcode
- * @addr_nbits: number of lines to send address
- * @data_nbits: number of lines for data
- * @rx_sg: Scatterlist for receive data read from flash
- * @cur_msg_mapped: message has been mapped for DMA
- */
-struct spi_flash_read_message {
-	void *buf;
-	loff_t from;
-	size_t len;
-	size_t retlen;
-	u8 read_opcode;
-	u8 addr_width;
-	u8 dummy_bytes;
-	u8 opcode_nbits;
-	u8 addr_nbits;
-	u8 data_nbits;
-	struct sg_table rx_sg;
-	bool cur_msg_mapped;
-};
-
-/* SPI core interface for flash read support */
-static inline bool spi_flash_read_supported(struct spi_device *spi)
-{
-	return spi->controller->spi_flash_read &&
-	       (!spi->controller->flash_read_supported ||
-	       spi->controller->flash_read_supported(spi));
-}
-
-int spi_flash_read(struct spi_device *spi,
-		   struct spi_flash_read_message *msg);
-
 /*---------------------------------------------------------------------------*/
 
 /*