diff options
author | Sergiu Moga <sergiu.moga@microchip.com> | 2022-09-22 14:33:40 +0300 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2022-09-22 17:31:01 +0300 |
commit | b9e947fbf008769ffda1028f627d604757e62265 (patch) | |
tree | 1587940008d08ae7d78cb56aac9740e0927afe65 /Documentation/devicetree/bindings/mfd | |
parent | 316ae95c175a7d770d1bfe4c011192712f57aa4a (diff) |
dt-bindings: serial: atmel,at91-usart: convert to json-schema
Convert at91 USART DT Binding for Atmel/Microchip SoCs to
json-schema format. Furthermore, move this binding to the
serial directory, since binding directories match hardware,
unlike the driver subsystems which match Linux convention.
Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220922113347.144383-3-sergiu.moga@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'Documentation/devicetree/bindings/mfd')
-rw-r--r-- | Documentation/devicetree/bindings/mfd/atmel-usart.txt | 98 |
1 files changed, 0 insertions, 98 deletions
diff --git a/Documentation/devicetree/bindings/mfd/atmel-usart.txt b/Documentation/devicetree/bindings/mfd/atmel-usart.txt deleted file mode 100644 index a09133066aff..000000000000 --- a/Documentation/devicetree/bindings/mfd/atmel-usart.txt +++ /dev/null @@ -1,98 +0,0 @@ -* Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART) - -Required properties for USART: -- compatible: Should be one of the following: - - "atmel,at91rm9200-usart" - - "atmel,at91sam9260-usart" - - "microchip,sam9x60-usart" - - "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart" - - "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart" - - "microchip,sam9x60-dbgu", "microchip,sam9x60-usart" -- reg: Should contain registers location and length -- interrupts: Should contain interrupt -- clock-names: tuple listing input clock names. - Required elements: "usart" -- clocks: phandles to input clocks. - -Required properties for USART in SPI mode: -- #size-cells : Must be <0> -- #address-cells : Must be <1> -- cs-gpios: chipselects (internal cs not supported) -- atmel,usart-mode : Must be <AT91_USART_MODE_SPI> (found in dt-bindings/mfd/at91-usart.h) - -Optional properties in serial and SPI mode: -- dma bindings for dma transfer: - - dmas: DMA specifier, consisting of a phandle to DMA controller node, - memory peripheral interface and USART DMA channel ID, FIFO configuration. - The order of DMA channels is fixed. The first DMA channel must be TX - associated channel and the second one must be RX associated channel. - Refer to dma.txt and atmel-dma.txt for details. - - dma-names: "tx" for TX channel. - "rx" for RX channel. - The order of dma-names is also fixed. The first name must be "tx" - and the second one must be "rx" as in the examples below. - -Optional properties in serial mode: -- atmel,use-dma-rx: use of PDC or DMA for receiving data -- atmel,use-dma-tx: use of PDC or DMA for transmitting data -- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD line respectively. - It will use specified PIO instead of the peripheral function pin for the USART feature. - If unsure, don't specify this property. -- atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO - capable USARTs. -- rs485-rts-delay, rs485-rx-during-tx, linux,rs485-enabled-at-boot-time: see rs485.txt - -<chip> compatible description: -- at91rm9200: legacy USART support -- at91sam9260: generic USART implementation for SAM9 SoCs - -Example: -- use PDC: - usart0: serial@fff8c000 { - compatible = "atmel,at91sam9260-usart"; - reg = <0xfff8c000 0x4000>; - interrupts = <7>; - clocks = <&usart0_clk>; - clock-names = "usart"; - atmel,use-dma-rx; - atmel,use-dma-tx; - rts-gpios = <&pioD 15 GPIO_ACTIVE_LOW>; - cts-gpios = <&pioD 16 GPIO_ACTIVE_LOW>; - dtr-gpios = <&pioD 17 GPIO_ACTIVE_LOW>; - dsr-gpios = <&pioD 18 GPIO_ACTIVE_LOW>; - dcd-gpios = <&pioD 20 GPIO_ACTIVE_LOW>; - rng-gpios = <&pioD 19 GPIO_ACTIVE_LOW>; - }; - -- use DMA: - usart0: serial@f001c000 { - compatible = "atmel,at91sam9260-usart"; - reg = <0xf001c000 0x100>; - interrupts = <12 4 5>; - clocks = <&usart0_clk>; - clock-names = "usart"; - atmel,use-dma-rx; - atmel,use-dma-tx; - dmas = <&dma0 2 0x3>, - <&dma0 2 0x204>; - dma-names = "tx", "rx"; - atmel,fifo-size = <32>; - }; - -- SPI mode: - #include <dt-bindings/mfd/at91-usart.h> - - spi0: spi@f001c000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "atmel,at91rm9200-usart", "atmel,at91sam9260-usart"; - atmel,usart-mode = <AT91_USART_MODE_SPI>; - reg = <0xf001c000 0x100>; - interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>; - clocks = <&usart0_clk>; - clock-names = "usart"; - dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>, - <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>; - dma-names = "tx", "rx"; - cs-gpios = <&pioB 3 0>; - }; |