diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2022-10-06 21:04:57 +0300 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2022-10-06 21:04:57 +0300 |
commit | ff6862c23d2e83d12d1759bf4337d41248fb4dc8 (patch) | |
tree | 36d499d2b2f807cd5c197267272fb310a4b0729a /Documentation/devicetree/bindings/power | |
parent | 40285e64c5654c956505dad34ed2ee4be163b1f0 (diff) | |
parent | 4413794917ba3ff42ade432870248b500253f152 (diff) |
Merge tag 'arm-drivers-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"The drivers branch for 6.1 is a bit larger than for most releases.
Most of the changes come from SoC maintainers for the drivers/soc
subsystem:
- A new driver for error handling on the NVIDIA Tegra 'control
backbone' bus.
- A new driver for Qualcomm LLCC/DDR bandwidth measurement
- New Rockchip rv1126 and rk3588 power domain drivers
- DT binding updates for memory controllers, older Rockchip SoCs,
various Mediatek devices, Qualcomm SCM firmware
- Minor updates to Hisilicon LPC bus, the Allwinner SRAM driver, the
Apple rtkit firmware driver, Tegra firmware
- Minor updates for SoC drivers (Samsung, Mediatek, Renesas, Tegra,
Qualcomm, Broadcom, NXP, ...)
There are also some separate subsystem with downstream maintainers
that merge updates this way:
- Various updates and new drivers in the memory controller subsystem
for Mediatek and Broadcom SoCs
- Small set of changes in preparation to add support for FF-A v1.1
specification later, in the Arm FF-A firmware subsystem
- debugfs support in the PSCI firmware subsystem"
* tag 'arm-drivers-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (149 commits)
ARM: remove check for CONFIG_DEBUG_LL_SER3
firmware/psci: Add debugfs support to ease debugging
firmware/psci: Print a warning if PSCI doesn't accept PC mode
dt-bindings: memory: snps,dw-umctl2-ddrc: Extend schema with IRQs/resets/clocks props
dt-bindings: memory: snps,dw-umctl2-ddrc: Replace opencoded numbers with macros
dt-bindings: memory: snps,dw-umctl2-ddrc: Use more descriptive device name
dt-bindings: memory: synopsys,ddrc-ecc: Detach Zynq DDRC controller support
soc: sunxi: sram: Add support for the D1 system control
soc: sunxi: sram: Export the LDO control register
soc: sunxi: sram: Save a pointer to the OF match data
soc: sunxi: sram: Return void from the release function
soc: apple: rtkit: Add apple_rtkit_poll
soc: imx: add i.MX93 media blk ctrl driver
soc: imx: add i.MX93 SRC power domain driver
soc: imx: imx8m-blk-ctrl: Use genpd_xlate_onecell
soc: imx: imx8mp-blk-ctrl: handle PCIe PHY resets
soc: imx: imx8m-blk-ctrl: add i.MX8MP VPU blk ctrl
soc: imx: add i.MX8MP HDMI blk ctrl HDCP/HRV_MWR
soc: imx: add icc paths for i.MX8MP hsio/hdmi blk ctrl
soc: imx: add icc paths for i.MX8MP media blk ctrl
...
Diffstat (limited to 'Documentation/devicetree/bindings/power')
4 files changed, 54 insertions, 116 deletions
diff --git a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml index b448101fac43..03b7f6aa591d 100644 --- a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml +++ b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Mediatek Power Domains Controller maintainers: - - Weiyi Lu <weiyi.lu@mediatek.com> + - MandyJH Liu <mandyjh.liu@mediatek.com> - Matthias Brugger <mbrugger@suse.com> description: | @@ -19,7 +19,7 @@ description: | properties: $nodename: - const: power-controller + pattern: '^power-controller(@[0-9a-f]+)?$' compatible: enum: @@ -42,6 +42,23 @@ properties: patternProperties: "^power-domain@[0-9a-f]+$": + $ref: "#/$defs/power-domain-node" + patternProperties: + "^power-domain@[0-9a-f]+$": + $ref: "#/$defs/power-domain-node" + patternProperties: + "^power-domain@[0-9a-f]+$": + $ref: "#/$defs/power-domain-node" + patternProperties: + "^power-domain@[0-9a-f]+$": + $ref: "#/$defs/power-domain-node" + unevaluatedProperties: false + unevaluatedProperties: false + unevaluatedProperties: false + unevaluatedProperties: false + +$defs: + power-domain-node: type: object description: | Represents the power domains within the power controller node as documented @@ -100,123 +117,9 @@ patternProperties: $ref: /schemas/types.yaml#/definitions/phandle description: phandle to the device containing the SMI register range. - patternProperties: - "^power-domain@[0-9a-f]+$": - type: object - description: | - Represents a power domain child within a power domain parent node. - - properties: - - '#power-domain-cells': - description: - Must be 0 for nodes representing a single PM domain and 1 for nodes - providing multiple PM domains. - - '#address-cells': - const: 1 - - '#size-cells': - const: 0 - - reg: - maxItems: 1 - - clocks: - description: | - A number of phandles to clocks that need to be enabled during domain - power-up sequencing. - - clock-names: - description: | - List of names of clocks, in order to match the power-up sequencing - for each power domain we need to group the clocks by name. BASIC - clocks need to be enabled before enabling the corresponding power - domain, and should not have a '-' in their name (i.e mm, mfg, venc). - SUSBYS clocks need to be enabled before releasing the bus protection, - and should contain a '-' in their name (i.e mm-0, isp-0, cam-0). - - In order to follow properly the power-up sequencing, the clocks must - be specified by order, adding first the BASIC clocks followed by the - SUSBSYS clocks. - - domain-supply: - description: domain regulator supply. - - mediatek,infracfg: - $ref: /schemas/types.yaml#/definitions/phandle - description: phandle to the device containing the INFRACFG register range. - - mediatek,smi: - $ref: /schemas/types.yaml#/definitions/phandle - description: phandle to the device containing the SMI register range. - - patternProperties: - "^power-domain@[0-9a-f]+$": - type: object - description: | - Represents a power domain child within a power domain parent node. - - properties: - - '#power-domain-cells': - description: - Must be 0 for nodes representing a single PM domain and 1 for nodes - providing multiple PM domains. - - '#address-cells': - const: 1 - - '#size-cells': - const: 0 - - reg: - maxItems: 1 - - clocks: - description: | - A number of phandles to clocks that need to be enabled during domain - power-up sequencing. - - clock-names: - description: | - List of names of clocks, in order to match the power-up sequencing - for each power domain we need to group the clocks by name. BASIC - clocks need to be enabled before enabling the corresponding power - domain, and should not have a '-' in their name (i.e mm, mfg, venc). - SUSBYS clocks need to be enabled before releasing the bus protection, - and should contain a '-' in their name (i.e mm-0, isp-0, cam-0). - - In order to follow properly the power-up sequencing, the clocks must - be specified by order, adding first the BASIC clocks followed by the - SUSBSYS clocks. - - domain-supply: - description: domain regulator supply. - - mediatek,infracfg: - $ref: /schemas/types.yaml#/definitions/phandle - description: phandle to the device containing the INFRACFG register range. - - mediatek,smi: - $ref: /schemas/types.yaml#/definitions/phandle - description: phandle to the device containing the SMI register range. - - required: - - reg - - additionalProperties: false - - required: - - reg - - additionalProperties: false - required: - reg - additionalProperties: false - required: - compatible diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml index 3934a2b44894..5b4eda919911 100644 --- a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml +++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml @@ -40,6 +40,7 @@ properties: - qcom,sm6115-rpmpd - qcom,sm6125-rpmpd - qcom,sm6350-rpmhpd + - qcom,sm6375-rpmpd - qcom,sm8150-rpmhpd - qcom,sm8250-rpmhpd - qcom,sm8350-rpmhpd diff --git a/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml index 3deb0fc8dfd3..0d5e999a58f1 100644 --- a/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml +++ b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml @@ -41,6 +41,8 @@ properties: - rockchip,rk3368-power-controller - rockchip,rk3399-power-controller - rockchip,rk3568-power-controller + - rockchip,rk3588-power-controller + - rockchip,rv1126-power-controller "#power-domain-cells": const: 1 @@ -119,6 +121,8 @@ $defs: "include/dt-bindings/power/rk3368-power.h" "include/dt-bindings/power/rk3399-power.h" "include/dt-bindings/power/rk3568-power.h" + "include/dt-bindings/power/rk3588-power.h" + "include/dt-bindings/power/rockchip,rv1126-power.h" clocks: minItems: 1 diff --git a/Documentation/devicetree/bindings/power/rockchip-io-domain.yaml b/Documentation/devicetree/bindings/power/rockchip-io-domain.yaml index 1727bf108979..d71fc72d4464 100644 --- a/Documentation/devicetree/bindings/power/rockchip-io-domain.yaml +++ b/Documentation/devicetree/bindings/power/rockchip-io-domain.yaml @@ -58,6 +58,7 @@ properties: - rockchip,rk3568-pmu-io-voltage-domain - rockchip,rv1108-io-voltage-domain - rockchip,rv1108-pmu-io-voltage-domain + - rockchip,rv1126-pmu-io-voltage-domain required: - compatible @@ -78,6 +79,7 @@ allOf: - $ref: "#/$defs/rk3568-pmu" - $ref: "#/$defs/rv1108" - $ref: "#/$defs/rv1108-pmu" + - $ref: "#/$defs/rv1126-pmu" $defs: px30: @@ -344,6 +346,34 @@ $defs: pmu-supply: description: The supply connected to PMUIO_VDD. + rv1126-pmu: + if: + properties: + compatible: + contains: + const: rockchip,rv1126-pmu-io-voltage-domain + + then: + properties: + vccio1-supply: + description: The supply connected to VCCIO1. + vccio2-supply: + description: The supply connected to VCCIO2. + vccio3-supply: + description: The supply connected to VCCIO3. + vccio4-supply: + description: The supply connected to VCCIO4. + vccio5-supply: + description: The supply connected to VCCIO5. + vccio6-supply: + description: The supply connected to VCCIO6. + vccio7-supply: + description: The supply connected to VCCIO7. + pmuio0-supply: + description: The supply connected to PMUIO0. + pmuio1-supply: + description: The supply connected to PMUIO1. + examples: - | io-domains { |