Merge tag 'usb-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the "big" set of USB and Thunderbolt driver changes for
  5.18-rc1. For the most part it's been a quiet development cycle for
  the USB core, but there are the usual "hot spots" of development
  activity.

  Included in here are:

   - Thunderbolt driver updates:
       - fixes for devices without displayport adapters
       - lane bonding support and improvements
       - other minor changes based on device testing

   - dwc3 gadget driver changes.

     It seems this driver will never be finished given that the IP core
     is showing up in zillions of new devices and each implementation
     decides to do something different with it...

   - uvc gadget driver updates as more devices start to use and rely on
     this hardware as well

   - usb_maxpacket() api changes to remove an unneeded and unused
     parameter.

   - usb-serial driver device id updates and small cleanups

   - typec cleanups and fixes based on device testing

   - device tree updates for usb properties

   - lots of other small fixes and driver updates.

  All of these have been in linux-next for weeks with no reported
  problems"

* tag 'usb-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits)
  USB: new quirk for Dell Gen 2 devices
  usb: dwc3: core: Add error log when core soft reset failed
  usb: dwc3: gadget: Move null pinter check to proper place
  usb: hub: Simplify error and success path in port_over_current_notify
  usb: cdns3: allocate TX FIFO size according to composite EP number
  usb: dwc3: Fix ep0 handling when getting reset while doing control transfer
  usb: Probe EHCI, OHCI controllers asynchronously
  usb: isp1760: Fix out-of-bounds array access
  xhci: Don't defer primary roothub registration if there is only one roothub
  USB: serial: option: add Quectel BG95 modem
  USB: serial: pl2303: fix type detection for odd device
  xhci: Allow host runtime PM as default for Intel Alder Lake N xHCI
  xhci: Remove quirk for over 10 year old evaluation hardware
  xhci: prevent U2 link power state if Intel tier policy prevented U1
  xhci: use generic command timer for stop endpoint commands.
  usb: host: xhci-plat: omit shared hcd if either root hub has no ports
  usb: host: xhci-plat: prepare operation w/o shared hcd
  usb: host: xhci-plat: create shared hcd after having added main hcd
  xhci: prepare for operation w/o shared hcd
  xhci: factor out parts of xhci_gen_setup()
  ...

1 files changed, 103 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml b/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml
new file mode 100644
index 000000000000..d25fc708e32c
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/ti,am62-usb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI's AM62 wrapper module for the Synopsys USBSS-DRD controller
+
+maintainers:
+  - Aswath Govindraju <a-govindraju@ti.com>
+
+properties:
+  compatible:
+    const: ti,am62-usb
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+  power-domains:
+    description:
+      PM domain provider node and an args specifier containing
+      the USB ISO device id value. See,
+      Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml
+    maxItems: 1
+
+  clocks:
+    description: Clock phandle to usb2_refclk
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: ref
+
+  ti,vbus-divider:
+    description:
+      Should be present if USB VBUS line is connected to the
+      VBUS pin of the SoC via a 1/3 voltage divider.
+    type: boolean
+
+  ti,syscon-phy-pll-refclk:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to the SYSCON entry
+          - description: USB phy control register offset within SYSCON
+    description:
+      Specifier for conveying frequency of ref clock input, for the
+      operation of USB2PHY.
+
+  '#address-cells':
+    const: 2
+
+  '#size-cells':
+    const: 2
+
+patternProperties:
+  "^usb@[0-9a-f]+$":
+    $ref: snps,dwc3.yaml#
+    description: Required child node
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - clocks
+  - clock-names
+  - ti,syscon-phy-pll-refclk
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    bus {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      usbss1: usb@f910000 {
+        compatible = "ti,am62-usb";
+        reg = <0x00 0x0f910000 0x00 0x800>;
+        clocks = <&k3_clks 162 3>;
+        clock-names = "ref";
+        ti,syscon-phy-pll-refclk = <&wkup_conf 0x4018>;
+        power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>;
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        usb@31100000 {
+          compatible = "snps,dwc3";
+          reg =<0x00 0x31100000 0x00 0x50000>;
+          interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
+                       <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
+          interrupt-names = "host", "peripheral";
+          maximum-speed = "high-speed";
+          dr_mode = "otg";
+        };
+      };
+    };