Merge airlied/drm-next into drm-misc-next

Backmerge the main pull request to sync up with all the newly landed
drivers. Otherwise we'll have chaos even before 4.12 started in
earnest.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

24 files changed, 130 insertions, 87 deletions

diff --git a/Documentation/devicetree/bindings/display/msm/gpu.txt b/Documentation/devicetree/bindings/display/msm/gpu.txt
index 67d0a58dbb77..43fac0fe09bb 100644
--- a/Documentation/devicetree/bindings/display/msm/gpu.txt
+++ b/Documentation/devicetree/bindings/display/msm/gpu.txt
@@ -1,23 +1,19 @@
 Qualcomm adreno/snapdragon GPU
 
 Required properties:
-- compatible: "qcom,adreno-3xx"
+- compatible: "qcom,adreno-XYZ.W", "qcom,adreno"
+    for example: "qcom,adreno-306.0", "qcom,adreno"
+  Note that you need to list the less specific "qcom,adreno" (since this
+  is what the device is matched on), in addition to the more specific
+  with the chip-id.
 - reg: Physical base address and length of the controller's registers.
 - interrupts: The interrupt signal from the gpu.
 - clocks: device clocks
   See ../clocks/clock-bindings.txt for details.
 - clock-names: the following clocks are required:
-  * "core_clk"
-  * "iface_clk"
-  * "mem_iface_clk"
-- qcom,chipid: gpu chip-id.  Note this may become optional for future
-  devices if we can reliably read the chipid from hw
-- qcom,gpu-pwrlevels: list of operating points
-  - compatible: "qcom,gpu-pwrlevels"
-  - for each qcom,gpu-pwrlevel:
-    - qcom,gpu-freq: requested gpu clock speed
-    - NOTE: downstream android driver defines additional parameters to
-      configure memory bandwidth scaling per OPP.
+  * "core"
+  * "iface"
+  * "mem_iface"
 
 Example:
 
@@ -25,28 +21,18 @@ Example:
 	...
 
 	gpu: qcom,kgsl-3d0@4300000 {
-		compatible = "qcom,adreno-3xx";
+		compatible = "qcom,adreno-320.2", "qcom,adreno";
 		reg = <0x04300000 0x20000>;
 		reg-names = "kgsl_3d0_reg_memory";
 		interrupts = <GIC_SPI 80 0>;
 		interrupt-names = "kgsl_3d0_irq";
 		clock-names =
-		    "core_clk",
-		    "iface_clk",
-		    "mem_iface_clk";
+		    "core",
+		    "iface",
+		    "mem_iface";
 		clocks =
 		    <&mmcc GFX3D_CLK>,
 		    <&mmcc GFX3D_AHB_CLK>,
 		    <&mmcc MMSS_IMEM_AHB_CLK>;
-		qcom,chipid = <0x03020100>;
-		qcom,gpu-pwrlevels {
-			compatible = "qcom,gpu-pwrlevels";
-			qcom,gpu-pwrlevel@0 {
-				qcom,gpu-freq = <450000000>;
-			};
-			qcom,gpu-pwrlevel@1 {
-				qcom,gpu-freq = <27000000>;
-			};
-		};
 	};
 };
diff --git a/Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt b/Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt
new file mode 100644
index 000000000000..eed48c3d4875
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt
@@ -0,0 +1,27 @@
+Multi-Inno MI0283QT display panel
+
+Required properties:
+- compatible:	"multi-inno,mi0283qt".
+
+The node for this driver must be a child node of a SPI controller, hence
+all mandatory properties described in ../spi/spi-bus.txt must be specified.
+
+Optional properties:
+- dc-gpios:	D/C pin. The presence/absence of this GPIO determines
+		the panel interface mode (IM[3:0] pins):
+		- present: IM=x110 4-wire 8-bit data serial interface
+		- absent:  IM=x101 3-wire 9-bit data serial interface
+- reset-gpios:	Reset pin
+- power-supply:	A regulator node for the supply voltage.
+- backlight:	phandle of the backlight device attached to the panel
+- rotation:	panel rotation in degrees counter clockwise (0,90,180,270)
+
+Example:
+	mi0283qt@0{
+		compatible = "multi-inno,mi0283qt";
+		reg = <0>;
+		spi-max-frequency = <32000000>;
+		rotation = <90>;
+		dc-gpios = <&gpio 25 0>;
+		backlight = <&backlight>;
+	};
diff --git a/Documentation/devicetree/bindings/display/panel/boe,nv101wxmn51.txt b/Documentation/devicetree/bindings/display/panel/boe,nv101wxmn51.txt
new file mode 100644
index 000000000000..b258d6a91ec6
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/boe,nv101wxmn51.txt
@@ -0,0 +1,7 @@
+BOE OPTOELECTRONICS TECHNOLOGY 10.1" WXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "boe,nv101wxmn51"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/netron-dy,e231732.txt b/Documentation/devicetree/bindings/display/panel/netron-dy,e231732.txt
new file mode 100644
index 000000000000..c6d06b5eab51
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/netron-dy,e231732.txt
@@ -0,0 +1,7 @@
+Netron-DY E231732 7.0" WSVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "netron-dy,e231732"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/panel.txt b/Documentation/devicetree/bindings/display/panel/panel.txt
new file mode 100644
index 000000000000..e2e6867852b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/panel.txt
@@ -0,0 +1,4 @@
+Common display properties
+-------------------------
+
+- rotation:	Display rotation in degrees counter clockwise (0,90,180,270)
diff --git a/Documentation/devicetree/bindings/display/panel/tianma,tm070jdhg30.txt b/Documentation/devicetree/bindings/display/panel/tianma,tm070jdhg30.txt
new file mode 100644
index 000000000000..eb9501a82e25
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/tianma,tm070jdhg30.txt
@@ -0,0 +1,7 @@
+Tianma Micro-electronics TM070JDHG30 7.0" WXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "tianma,tm070jdhg30"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt
index 0dcb7c7d3e40..944657684d73 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt
@@ -15,6 +15,9 @@ Properties:
   Second cell specifies the irq distribution mode to cores
      0=Round Robin; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3
 
+  The second cell in interrupts property is deprecated and may be ignored by
+  the kernel.
+
   intc accessed via the special ARC AUX register interface, hence "reg" property
   is not specified.
 
diff --git a/Documentation/devicetree/bindings/net/mediatek-net.txt b/Documentation/devicetree/bindings/net/mediatek-net.txt
index c010fafc66a8..c7194e87d5f4 100644
--- a/Documentation/devicetree/bindings/net/mediatek-net.txt
+++ b/Documentation/devicetree/bindings/net/mediatek-net.txt
@@ -7,7 +7,7 @@ have dual GMAC each represented by a child node..
 * Ethernet controller node
 
 Required properties:
-- compatible: Should be "mediatek,mt7623-eth"
+- compatible: Should be "mediatek,mt2701-eth"
 - reg: Address and length of the register set for the device
 - interrupts: Should contain the three frame engines interrupts in numeric
 	order. These are fe_int0, fe_int1 and fe_int2.
diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt
index ff1bc4b1bb3b..fb5056b22685 100644
--- a/Documentation/devicetree/bindings/net/phy.txt
+++ b/Documentation/devicetree/bindings/net/phy.txt
@@ -19,8 +19,9 @@ Optional Properties:
   specifications. If neither of these are specified, the default is to
   assume clause 22.
 
-  If the phy's identifier is known then the list may contain an entry
-  of the form: "ethernet-phy-idAAAA.BBBB" where
+  If the PHY reports an incorrect ID (or none at all) then the
+  "compatible" list may contain an entry with the correct PHY ID in the
+  form: "ethernet-phy-idAAAA.BBBB" where
      AAAA - The value of the 16 bit Phy Identifier 1 register as
             4 hex digits. This is the chip vendor OUI bits 3:18
      BBBB - The value of the 16 bit Phy Identifier 2 register as
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 16d3b5e7f5d1..f98498df2365 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -187,6 +187,7 @@ mpl	MPL AG
 mqmaker	mqmaker Inc.
 msi	Micro-Star International Co. Ltd.
 mti	Imagination Technologies Ltd. (formerly MIPS Technologies Inc.)
+multi-inno	Multi-Inno Technology Co.,Ltd
 mundoreader	Mundo Reader S.L.
 murata	Murata Manufacturing Co., Ltd.
 mxicy	Macronix International Co., Ltd.
@@ -196,6 +197,7 @@ nec	NEC LCD Technologies, Ltd.
 neonode		Neonode Inc.
 netgear	NETGEAR
 netlogic	Broadcom Corporation (formerly NetLogic Microsystems)
+netron-dy	Netron DY
 netxeon		Shenzhen Netxeon Technology CO., LTD
 nexbox	Nexbox
 newhaven	Newhaven Display International
@@ -296,6 +298,7 @@ technologic	Technologic Systems
 terasic	Terasic Inc.
 thine	THine Electronics, Inc.
 ti	Texas Instruments
+tianma	Tianma Micro-electronics Co., Ltd.
 tlm	Trusted Logic Mobility
 topeet  Topeet
 toradex	Toradex AG
diff --git a/Documentation/gpu/index.rst b/Documentation/gpu/index.rst
index c9b08b02f57c..70a91b372b21 100644
--- a/Documentation/gpu/index.rst
+++ b/Documentation/gpu/index.rst
@@ -11,6 +11,7 @@ Linux GPU Driver Developer's Guide
    drm-kms-helpers
    drm-uapi
    i915
+   tinydrm
    vga-switcheroo
    vgaarbiter
    todo
diff --git a/Documentation/gpu/tinydrm.rst b/Documentation/gpu/tinydrm.rst
new file mode 100644
index 000000000000..a913644bfc19
--- /dev/null
+++ b/Documentation/gpu/tinydrm.rst
@@ -0,0 +1,42 @@
+==========================
+drm/tinydrm Driver library
+==========================
+
+.. kernel-doc:: drivers/gpu/drm/tinydrm/core/tinydrm-core.c
+   :doc: overview
+
+Core functionality
+==================
+
+.. kernel-doc:: drivers/gpu/drm/tinydrm/core/tinydrm-core.c
+   :doc: core
+
+.. kernel-doc:: include/drm/tinydrm/tinydrm.h
+   :internal:
+
+.. kernel-doc:: drivers/gpu/drm/tinydrm/core/tinydrm-core.c
+   :export:
+
+.. kernel-doc:: drivers/gpu/drm/tinydrm/core/tinydrm-pipe.c
+   :export:
+
+Additional helpers
+==================
+
+.. kernel-doc:: include/drm/tinydrm/tinydrm-helpers.h
+   :internal:
+
+.. kernel-doc:: drivers/gpu/drm/tinydrm/core/tinydrm-helpers.c
+   :export:
+
+MIPI DBI Compatible Controllers
+===============================
+
+.. kernel-doc:: drivers/gpu/drm/tinydrm/mipi-dbi.c
+   :doc: overview
+
+.. kernel-doc:: include/drm/tinydrm/mipi-dbi.h
+   :internal:
+
+.. kernel-doc:: drivers/gpu/drm/tinydrm/mipi-dbi.c
+   :export:
diff --git a/Documentation/media/uapi/cec/cec-func-close.rst b/Documentation/media/uapi/cec/cec-func-close.rst
index 8267c31b317d..895d9c2d1c04 100644
--- a/Documentation/media/uapi/cec/cec-func-close.rst
+++ b/Documentation/media/uapi/cec/cec-func-close.rst
@@ -33,11 +33,6 @@ Arguments
 Description
 ===========
 
-.. note::
-
-   This documents the proposed CEC API. This API is not yet finalized
-   and is currently only available as a staging kernel module.
-
 Closes the cec device. Resources associated with the file descriptor are
 freed. The device configuration remain unchanged.
 
diff --git a/Documentation/media/uapi/cec/cec-func-ioctl.rst b/Documentation/media/uapi/cec/cec-func-ioctl.rst
index 9e8dbb118d6a..7dcfd178fb24 100644
--- a/Documentation/media/uapi/cec/cec-func-ioctl.rst
+++ b/Documentation/media/uapi/cec/cec-func-ioctl.rst
@@ -39,11 +39,6 @@ Arguments
 Description
 ===========
 
-.. note::
-
-   This documents the proposed CEC API. This API is not yet finalized
-   and is currently only available as a staging kernel module.
-
 The :c:func:`ioctl()` function manipulates cec device parameters. The
 argument ``fd`` must be an open file descriptor.
 
diff --git a/Documentation/media/uapi/cec/cec-func-open.rst b/Documentation/media/uapi/cec/cec-func-open.rst
index af3f5b5c24c6..0304388cd159 100644
--- a/Documentation/media/uapi/cec/cec-func-open.rst
+++ b/Documentation/media/uapi/cec/cec-func-open.rst
@@ -46,11 +46,6 @@ Arguments
 Description
 ===========
 
-.. note::
-
-   This documents the proposed CEC API. This API is not yet finalized
-   and is currently only available as a staging kernel module.
-
 To open a cec device applications call :c:func:`open()` with the
 desired device name. The function has no side effects; the device
 configuration remain unchanged.
diff --git a/Documentation/media/uapi/cec/cec-func-poll.rst b/Documentation/media/uapi/cec/cec-func-poll.rst
index cfb73e6027a5..6a863cfda6e0 100644
--- a/Documentation/media/uapi/cec/cec-func-poll.rst
+++ b/Documentation/media/uapi/cec/cec-func-poll.rst
@@ -39,11 +39,6 @@ Arguments
 Description
 ===========
 
-.. note::
-
-   This documents the proposed CEC API. This API is not yet finalized
-   and is currently only available as a staging kernel module.
-
 With the :c:func:`poll()` function applications can wait for CEC
 events.
 
diff --git a/Documentation/media/uapi/cec/cec-intro.rst b/Documentation/media/uapi/cec/cec-intro.rst
index 4a19ea5323a9..07ee2b8f89d6 100644
--- a/Documentation/media/uapi/cec/cec-intro.rst
+++ b/Documentation/media/uapi/cec/cec-intro.rst
@@ -3,11 +3,6 @@
 Introduction
 ============
 
-.. note::
-
-   This documents the proposed CEC API. This API is not yet finalized
-   and is currently only available as a staging kernel module.
-
 HDMI connectors provide a single pin for use by the Consumer Electronics
 Control protocol. This protocol allows different devices connected by an
 HDMI cable to communicate. The protocol for CEC version 1.4 is defined
@@ -31,3 +26,15 @@ control just the CEC pin.
 Drivers that support CEC will create a CEC device node (/dev/cecX) to
 give userspace access to the CEC adapter. The
 :ref:`CEC_ADAP_G_CAPS` ioctl will tell userspace what it is allowed to do.
+
+In order to check the support and test it, it is suggested to download
+the `v4l-utils <https://git.linuxtv.org/v4l-utils.git/>`_ package. It
+provides three tools to handle CEC:
+
+- cec-ctl: the Swiss army knife of CEC. Allows you to configure, transmit
+  and monitor CEC messages.
+
+- cec-compliance: does a CEC compliance test of a remote CEC device to
+  determine how compliant the CEC implementation is.
+
+- cec-follower: emulates a CEC follower.
diff --git a/Documentation/media/uapi/cec/cec-ioc-adap-g-caps.rst b/Documentation/media/uapi/cec/cec-ioc-adap-g-caps.rst
index 2b0ddb14b280..a0e961f11017 100644
--- a/Documentation/media/uapi/cec/cec-ioc-adap-g-caps.rst
+++ b/Documentation/media/uapi/cec/cec-ioc-adap-g-caps.rst
@@ -29,11 +29,6 @@ Arguments
 Description
 ===========
 
-.. note::
-
-   This documents the proposed CEC API. This API is not yet finalized
-   and is currently only available as a staging kernel module.
-
 All cec devices must support :ref:`ioctl CEC_ADAP_G_CAPS <CEC_ADAP_G_CAPS>`. To query
 device information, applications call the ioctl with a pointer to a
 struct :c:type:`cec_caps`. The driver fills the structure and
diff --git a/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst b/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst
index b878637e91b3..09f09bbe28d4 100644
--- a/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst
+++ b/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst
@@ -35,11 +35,6 @@ Arguments
 Description
 ===========
 
-.. note::
-
-   This documents the proposed CEC API. This API is not yet finalized
-   and is currently only available as a staging kernel module.
-
 To query the current CEC logical addresses, applications call
 :ref:`ioctl CEC_ADAP_G_LOG_ADDRS <CEC_ADAP_G_LOG_ADDRS>` with a pointer to a
 struct :c:type:`cec_log_addrs` where the driver stores the logical addresses.
diff --git a/Documentation/media/uapi/cec/cec-ioc-adap-g-phys-addr.rst b/Documentation/media/uapi/cec/cec-ioc-adap-g-phys-addr.rst
index 3357deb43c85..a3cdc75cec3e 100644
--- a/Documentation/media/uapi/cec/cec-ioc-adap-g-phys-addr.rst
+++ b/Documentation/media/uapi/cec/cec-ioc-adap-g-phys-addr.rst
@@ -35,11 +35,6 @@ Arguments
 Description
 ===========
 
-.. note::
-
-   This documents the proposed CEC API. This API is not yet finalized
-   and is currently only available as a staging kernel module.
-
 To query the current physical address applications call
 :ref:`ioctl CEC_ADAP_G_PHYS_ADDR <CEC_ADAP_G_PHYS_ADDR>` with a pointer to a __u16 where the
 driver stores the physical address.
diff --git a/Documentation/media/uapi/cec/cec-ioc-dqevent.rst b/Documentation/media/uapi/cec/cec-ioc-dqevent.rst
index e256c6605de7..6e589a1fae17 100644
--- a/Documentation/media/uapi/cec/cec-ioc-dqevent.rst
+++ b/Documentation/media/uapi/cec/cec-ioc-dqevent.rst
@@ -30,11 +30,6 @@ Arguments
 Description
 ===========
 
-.. note::
-
-   This documents the proposed CEC API. This API is not yet finalized
-   and is currently only available as a staging kernel module.
-
 CEC devices can send asynchronous events. These can be retrieved by
 calling :c:func:`CEC_DQEVENT`. If the file descriptor is in
 non-blocking mode and no event is pending, then it will return -1 and
diff --git a/Documentation/media/uapi/cec/cec-ioc-g-mode.rst b/Documentation/media/uapi/cec/cec-ioc-g-mode.rst
index 4f5818b9d277..e4ded9df0a84 100644
--- a/Documentation/media/uapi/cec/cec-ioc-g-mode.rst
+++ b/Documentation/media/uapi/cec/cec-ioc-g-mode.rst
@@ -31,11 +31,6 @@ Arguments
 Description
 ===========
 
-.. note::
-
-   This documents the proposed CEC API. This API is not yet finalized
-   and is currently only available as a staging kernel module.
-
 By default any filehandle can use :ref:`CEC_TRANSMIT`, but in order to prevent
 applications from stepping on each others toes it must be possible to
 obtain exclusive access to the CEC adapter. This ioctl sets the
diff --git a/Documentation/media/uapi/cec/cec-ioc-receive.rst b/Documentation/media/uapi/cec/cec-ioc-receive.rst
index bdf015b1d1dc..dc2adb391c0a 100644
--- a/Documentation/media/uapi/cec/cec-ioc-receive.rst
+++ b/Documentation/media/uapi/cec/cec-ioc-receive.rst
@@ -34,11 +34,6 @@ Arguments
 Description
 ===========
 
-.. note::
-
-   This documents the proposed CEC API. This API is not yet finalized
-   and is currently only available as a staging kernel module.
-
 To receive a CEC message the application has to fill in the
 ``timeout`` field of struct :c:type:`cec_msg` and pass it to
 :ref:`ioctl CEC_RECEIVE <CEC_RECEIVE>`.
diff --git a/Documentation/power/states.txt b/Documentation/power/states.txt
index 8a39ce45d8a0..008ecb588317 100644
--- a/Documentation/power/states.txt
+++ b/Documentation/power/states.txt
@@ -35,9 +35,7 @@ only one way to cause the system to go into the Suspend-To-RAM state (write
 The default suspend mode (ie. the one to be used without writing anything into
 /sys/power/mem_sleep) is either "deep" (if Suspend-To-RAM is supported) or
 "s2idle", but it can be overridden by the value of the "mem_sleep_default"
-parameter in the kernel command line.  On some ACPI-based systems, depending on
-the information in the FADT, the default may be "s2idle" even if Suspend-To-RAM
-is supported.
+parameter in the kernel command line.
 
 The properties of all of the sleep states are described below.