Merge tag 'arm-multiplatform-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARMv4T/v5 multiplatform support from Arnd Bergmann:
 "This series has been 12 years in the making, it mostly finishes the
  work that was started with the founding of Linaro to clean up platform
  support in the kernel.

  The largest change here is a cleanup of the omap1 platform, which is
  the final ARM machine type to get converted to the common-clk
  subsystem. All the omap1 specific drivers are now made independent of
  the mach/*.h headers to allow the platform to be part of a generic
  ARMv4/v5 multiplatform kernel.

  The last bit that enables this support is still missing here while we
  wait for some last dependencies to make it into the mainline kernel
  through other subsystems.

  The s3c24xx, ixp4xx, iop32x, ep93xx and dove platforms were all almost
  at the point of allowing multiplatform kernels, this work gets
  completed here along with a few additional cleanup. At the same time,
  the s3c24xx and s3c64xx are now deprecated and expected to get removed
  in the future.

  The PXA and OMAP1 bits are in a separate branch because of
  dependencies. Once both branches are merged, only the three Intel
  StrongARM platforms (RiscPC, Footbridge/NetWinder and StrongARM1100)
  need separate kernels, and there are no plans to include these"

* tag 'arm-multiplatform-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (61 commits)
  ARM: ixp4xx: Consolidate Kconfig fixing issue
  ARM: versatile: Add missing of_node_put in dcscb_init
  ARM: config: Refresh IXP4xx config after multiplatform
  ARM: omap1: add back omap_set_dma_priority() stub
  ARM: omap: fix missing declaration warnings
  ARM: omap: fix address space warnings from sparse
  ARM: spear: remove include/mach/ subdirectory
  ARM: davinci: remove include/mach/ subdirectory
  ARM: omap2: remove include/mach/ subdirectory
  integrator: remove empty ap_init_early()
  ARM: s3c: fix include path
  MAINTAINERS: omap1: Add Janusz as an additional maintainer
  ARM: omap1: htc_herald: fix typos in comments
  ARM: OMAP1: fix typos in comments
  ARM: OMAP1: clock: Remove noop code
  ARM: OMAP1: clock: Remove unused code
  ARM: OMAP1: clock: Fix UART rate reporting algorithm
  ARM: OMAP1: clock: Fix early UART rate issues
  ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF
  ARM: omap1: fix build with no SoC selected
  ...

1 files changed, 0 insertions, 103 deletions

diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
deleted file mode 100644
index a4c36024b5e8..000000000000
--- a/arch/arm/mach-realview/Kconfig
+++ /dev/null
@@ -1,103 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-menuconfig ARCH_REALVIEW
-	bool "ARM Ltd. RealView family"
-	depends on ARCH_MULTI_V5 || ARCH_MULTI_V6 || ARCH_MULTI_V7
-	select ARM_AMBA
-	select ARM_GIC
-	select ARM_TIMER_SP804
-	select CLK_SP810
-	select GPIO_PL061 if GPIOLIB
-	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if SMP
-	select HAVE_PATA_PLATFORM
-	select HAVE_TCM
-	select CLK_ICST
-	select MACH_REALVIEW_EB if ARCH_MULTI_V5
-	select MFD_SYSCON
-	select PLAT_VERSATILE
-	select POWER_RESET
-	select POWER_RESET_VERSATILE
-	select POWER_SUPPLY
-	select SOC_REALVIEW
-	help
-	  This enables support for ARM Ltd RealView boards.
-
-if ARCH_REALVIEW
-
-config MACH_REALVIEW_EB
-	bool "Support RealView(R) Emulation Baseboard"
-	select ARM_GIC
-	select CPU_ARM926T if ARCH_MULTI_V5
-	help
-	  Include support for the ARM(R) RealView(R) Emulation Baseboard
-	  platform. On an ARMv5 kernel, this will include support for
-	  the ARM926EJ-S core tile, while on an ARMv6/v7 kernel, at least
-	  one of the ARM1136, ARM1176, ARM11MPCore or Cortex-A9MPCore
-	  core tile options should be enabled.
-
-config REALVIEW_EB_ARM1136
-	bool "Support ARM1136J(F)-S Tile"
-	depends on MACH_REALVIEW_EB && ARCH_MULTI_V6
-	select CPU_V6
-	help
-	  Enable support for the ARM1136 tile fitted to the
-	  Realview(R) Emulation Baseboard platform.
-
-config REALVIEW_EB_ARM1176
-	bool "Support ARM1176JZ(F)-S Tile"
-	depends on MACH_REALVIEW_EB && ARCH_MULTI_V6
-	help
-	  Enable support for the ARM1176 tile fitted to the
-	  Realview(R) Emulation Baseboard platform.
-
-config REALVIEW_EB_A9MP
-	bool "Support Multicore Cortex-A9 Tile"
-	depends on MACH_REALVIEW_EB && ARCH_MULTI_V7
-	help
-	  Enable support for the Cortex-A9MPCore tile fitted to the
-	  Realview(R) Emulation Baseboard platform.
-
-config REALVIEW_EB_ARM11MP
-	bool "Support ARM11MPCore Tile"
-	depends on MACH_REALVIEW_EB && ARCH_MULTI_V6
-	select HAVE_SMP
-	help
-	  Enable support for the ARM11MPCore tile fitted to the Realview(R)
-	  Emulation Baseboard platform.
-
-config MACH_REALVIEW_PB11MP
-	bool "Support RealView(R) Platform Baseboard for ARM11MPCore"
-	depends on ARCH_MULTI_V6
-	select HAVE_SMP
-	help
-	  Include support for the ARM(R) RealView(R) Platform Baseboard for
-	  the ARM11MPCore.  This platform has an on-board ARM11MPCore and has
-	  support for PCI-E and Compact Flash.
-
-# ARMv6 CPU without K extensions, but does have the new exclusive ops
-config MACH_REALVIEW_PB1176
-	bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S"
-	depends on ARCH_MULTI_V6
-	select CPU_V6
-	select HAVE_TCM
-	help
-	  Include support for the ARM(R) RealView(R) Platform Baseboard for
-	  ARM1176JZF-S.
-
-config MACH_REALVIEW_PBA8
-	bool "Support RealView(R) Platform Baseboard for Cortex(tm)-A8 platform"
-	depends on ARCH_MULTI_V7
-	help
-	  Include support for the ARM(R) RealView Platform Baseboard for
-	  Cortex(tm)-A8.  This platform has an on-board Cortex-A8 and has
-	  support for PCI-E and Compact Flash.
-
-config MACH_REALVIEW_PBX
-	bool "Support RealView(R) Platform Baseboard Explore for Cortex-A9"
-	depends on ARCH_MULTI_V7
-	select ZONE_DMA
-	help
-	  Include support for the ARM(R) RealView(R) Platform Baseboard
-	  Explore.
-
-endif