Merge tag 'arm-multiplatform-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARMv4T/v5 multiplatform support from Arnd Bergmann:
 "This series has been 12 years in the making, it mostly finishes the
  work that was started with the founding of Linaro to clean up platform
  support in the kernel.

  The largest change here is a cleanup of the omap1 platform, which is
  the final ARM machine type to get converted to the common-clk
  subsystem. All the omap1 specific drivers are now made independent of
  the mach/*.h headers to allow the platform to be part of a generic
  ARMv4/v5 multiplatform kernel.

  The last bit that enables this support is still missing here while we
  wait for some last dependencies to make it into the mainline kernel
  through other subsystems.

  The s3c24xx, ixp4xx, iop32x, ep93xx and dove platforms were all almost
  at the point of allowing multiplatform kernels, this work gets
  completed here along with a few additional cleanup. At the same time,
  the s3c24xx and s3c64xx are now deprecated and expected to get removed
  in the future.

  The PXA and OMAP1 bits are in a separate branch because of
  dependencies. Once both branches are merged, only the three Intel
  StrongARM platforms (RiscPC, Footbridge/NetWinder and StrongARM1100)
  need separate kernels, and there are no plans to include these"

* tag 'arm-multiplatform-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (61 commits)
  ARM: ixp4xx: Consolidate Kconfig fixing issue
  ARM: versatile: Add missing of_node_put in dcscb_init
  ARM: config: Refresh IXP4xx config after multiplatform
  ARM: omap1: add back omap_set_dma_priority() stub
  ARM: omap: fix missing declaration warnings
  ARM: omap: fix address space warnings from sparse
  ARM: spear: remove include/mach/ subdirectory
  ARM: davinci: remove include/mach/ subdirectory
  ARM: omap2: remove include/mach/ subdirectory
  integrator: remove empty ap_init_early()
  ARM: s3c: fix include path
  MAINTAINERS: omap1: Add Janusz as an additional maintainer
  ARM: omap1: htc_herald: fix typos in comments
  ARM: OMAP1: fix typos in comments
  ARM: OMAP1: clock: Remove noop code
  ARM: OMAP1: clock: Remove unused code
  ARM: OMAP1: clock: Fix UART rate reporting algorithm
  ARM: OMAP1: clock: Fix early UART rate issues
  ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF
  ARM: omap1: fix build with no SoC selected
  ...

1 files changed, 309 insertions, 0 deletions

diff --git a/arch/arm/mach-versatile/Kconfig b/arch/arm/mach-versatile/Kconfig
index f78a1d358031..2ef226194c3a 100644
--- a/arch/arm/mach-versatile/Kconfig
+++ b/arch/arm/mach-versatile/Kconfig
@@ -2,6 +2,7 @@
 config ARCH_VERSATILE
 	bool "ARM Ltd. Versatile family"
 	depends on ARCH_MULTI_V5
+	depends on CPU_LITTLE_ENDIAN
 	select ARM_AMBA
 	select ARM_TIMER_SP804
 	select ARM_VIC
@@ -16,3 +17,311 @@ config ARCH_VERSATILE
 	help
 	  This enables support for ARM Ltd Versatile board.
 
+menuconfig ARCH_INTEGRATOR
+	bool "ARM Ltd. Integrator family"
+	depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V6
+	depends on CPU_LITTLE_ENDIAN || ARCH_MULTI_V6
+	select ARM_AMBA
+	select CMA
+	select DMA_CMA
+	select HAVE_TCM
+	select CLK_ICST
+	select MFD_SYSCON
+	select PLAT_VERSATILE
+	select POWER_RESET
+	select POWER_RESET_VERSATILE
+	select POWER_SUPPLY
+	select SOC_INTEGRATOR_CM
+	select VERSATILE_FPGA_IRQ
+	help
+	  Support for ARM's Integrator platform.
+
+if ARCH_INTEGRATOR
+
+config ARCH_INTEGRATOR_AP
+	bool "Support Integrator/AP and Integrator/PP2 platforms"
+	select INTEGRATOR_AP_TIMER
+	select SERIAL_AMBA_PL010 if TTY
+	select SERIAL_AMBA_PL010_CONSOLE if TTY
+	select SOC_BUS
+	help
+	  Include support for the ARM(R) Integrator/AP and
+	  Integrator/PP2 platforms.
+
+config INTEGRATOR_IMPD1
+	bool "Include support for Integrator/IM-PD1"
+	depends on ARCH_INTEGRATOR_AP
+	select ARM_VIC
+	select GPIO_PL061
+	select GPIOLIB
+	select REGULATOR
+	select REGULATOR_FIXED_VOLTAGE
+	help
+	  The IM-PD1 is an add-on logic module for the Integrator which
+	  allows ARM(R) Ltd PrimeCells to be developed and evaluated.
+	  The IM-PD1 can be found on the Integrator/PP2 platform.
+
+config INTEGRATOR_CM720T
+	bool "Integrator/CM720T core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V4T
+	select CPU_ARM720T
+
+config INTEGRATOR_CM920T
+	bool "Integrator/CM920T core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V4T
+	select CPU_ARM920T
+
+config INTEGRATOR_CM922T_XA10
+	bool "Integrator/CM922T-XA10 core module"
+	depends on ARCH_MULTI_V4T
+	depends on ARCH_INTEGRATOR_AP
+	select CPU_ARM922T
+
+config INTEGRATOR_CM926EJS
+	bool "Integrator/CM926EJ-S core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V5
+	select CPU_ARM926T
+
+config INTEGRATOR_CM10200E_REV0
+	bool "Integrator/CM10200E rev.0 core module"
+	depends on ARCH_INTEGRATOR_AP && n
+	depends on ARCH_MULTI_V5
+	select CPU_ARM1020
+
+config INTEGRATOR_CM10200E
+	bool "Integrator/CM10200E core module"
+	depends on ARCH_INTEGRATOR_AP && n
+	depends on ARCH_MULTI_V5
+	select CPU_ARM1020E
+
+config INTEGRATOR_CM10220E
+	bool "Integrator/CM10220E core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V5
+	select CPU_ARM1022
+
+config INTEGRATOR_CM1026EJS
+	bool "Integrator/CM1026EJ-S core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V5
+	select CPU_ARM1026
+
+config INTEGRATOR_CM1136JFS
+	bool "Integrator/CM1136JF-S core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V6
+	select CPU_V6
+
+config ARCH_INTEGRATOR_CP
+	bool "Support Integrator/CP platform"
+	depends on ARCH_MULTI_V5 || ARCH_MULTI_V6
+	select ARM_TIMER_SP804
+	select SERIAL_AMBA_PL011 if TTY
+	select SERIAL_AMBA_PL011_CONSOLE if TTY
+	select SOC_BUS
+	help
+	  Include support for the ARM(R) Integrator CP platform.
+
+config INTEGRATOR_CT926
+	bool "Integrator/CT926 (ARM926EJ-S) core tile"
+	depends on ARCH_INTEGRATOR_CP
+	depends on ARCH_MULTI_V5
+	select CPU_ARM926T
+
+config INTEGRATOR_CTB36
+	bool "Integrator/CTB36 (ARM1136JF-S) core tile"
+	depends on ARCH_INTEGRATOR_CP
+	depends on ARCH_MULTI_V6
+	select CPU_V6
+
+config ARCH_CINTEGRATOR
+	depends on ARCH_INTEGRATOR_CP
+	def_bool y
+
+endif
+
+menuconfig ARCH_REALVIEW
+	bool "ARM Ltd. RealView family"
+	depends on (CPU_LITTLE_ENDIAN && ARCH_MULTI_V5) || ARCH_MULTI_V6 || ARCH_MULTI_V7
+	select ARM_AMBA
+	select ARM_GIC
+	select ARM_TIMER_SP804
+	select CLK_SP810
+	select GPIO_PL061 if GPIOLIB
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if SMP
+	select HAVE_PATA_PLATFORM
+	select HAVE_TCM
+	select CLK_ICST
+	select MACH_REALVIEW_EB if ARCH_MULTI_V5
+	select MFD_SYSCON
+	select PLAT_VERSATILE
+	select POWER_RESET
+	select POWER_RESET_VERSATILE
+	select POWER_SUPPLY
+	select SOC_REALVIEW
+	help
+	  This enables support for ARM Ltd RealView boards.
+
+if ARCH_REALVIEW
+
+config MACH_REALVIEW_EB
+	bool "Support RealView(R) Emulation Baseboard"
+	select ARM_GIC
+	select CPU_ARM926T if ARCH_MULTI_V5
+	help
+	  Include support for the ARM(R) RealView(R) Emulation Baseboard
+	  platform. On an ARMv5 kernel, this will include support for
+	  the ARM926EJ-S core tile, while on an ARMv6/v7 kernel, at least
+	  one of the ARM1136, ARM1176, ARM11MPCore or Cortex-A9MPCore
+	  core tile options should be enabled.
+
+config REALVIEW_EB_ARM1136
+	bool "Support ARM1136J(F)-S Tile"
+	depends on MACH_REALVIEW_EB && ARCH_MULTI_V6
+	select CPU_V6
+	help
+	  Enable support for the ARM1136 tile fitted to the
+	  Realview(R) Emulation Baseboard platform.
+
+config REALVIEW_EB_ARM1176
+	bool "Support ARM1176JZ(F)-S Tile"
+	depends on MACH_REALVIEW_EB && ARCH_MULTI_V6
+	help
+	  Enable support for the ARM1176 tile fitted to the
+	  Realview(R) Emulation Baseboard platform.
+
+config REALVIEW_EB_A9MP
+	bool "Support Multicore Cortex-A9 Tile"
+	depends on MACH_REALVIEW_EB && ARCH_MULTI_V7
+	help
+	  Enable support for the Cortex-A9MPCore tile fitted to the
+	  Realview(R) Emulation Baseboard platform.
+
+config REALVIEW_EB_ARM11MP
+	bool "Support ARM11MPCore Tile"
+	depends on MACH_REALVIEW_EB && ARCH_MULTI_V6
+	select HAVE_SMP
+	help
+	  Enable support for the ARM11MPCore tile fitted to the Realview(R)
+	  Emulation Baseboard platform.
+
+config MACH_REALVIEW_PB11MP
+	bool "Support RealView(R) Platform Baseboard for ARM11MPCore"
+	depends on ARCH_MULTI_V6
+	select HAVE_SMP
+	help
+	  Include support for the ARM(R) RealView(R) Platform Baseboard for
+	  the ARM11MPCore.  This platform has an on-board ARM11MPCore and has
+	  support for PCI-E and Compact Flash.
+
+# ARMv6 CPU without K extensions, but does have the new exclusive ops
+config MACH_REALVIEW_PB1176
+	bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S"
+	depends on ARCH_MULTI_V6
+	select CPU_V6
+	select HAVE_TCM
+	help
+	  Include support for the ARM(R) RealView(R) Platform Baseboard for
+	  ARM1176JZF-S.
+
+config MACH_REALVIEW_PBA8
+	bool "Support RealView(R) Platform Baseboard for Cortex(tm)-A8 platform"
+	depends on ARCH_MULTI_V7
+	help
+	  Include support for the ARM(R) RealView Platform Baseboard for
+	  Cortex(tm)-A8.  This platform has an on-board Cortex-A8 and has
+	  support for PCI-E and Compact Flash.
+
+config MACH_REALVIEW_PBX
+	bool "Support RealView(R) Platform Baseboard Explore for Cortex-A9"
+	depends on ARCH_MULTI_V7
+	select ZONE_DMA
+	help
+	  Include support for the ARM(R) RealView(R) Platform Baseboard
+	  Explore.
+
+endif
+
+menuconfig ARCH_VEXPRESS
+	bool "ARM Ltd. Versatile Express family"
+	depends on ARCH_MULTI_V7
+	select ARM_AMBA
+	select ARM_GIC
+	select ARM_GLOBAL_TIMER
+	select ARM_TIMER_SP804
+	select GPIOLIB
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if SMP
+	select HAVE_PATA_PLATFORM
+	select CLK_ICST
+	select NO_IOPORT_MAP
+	select PLAT_VERSATILE
+	select POWER_RESET
+	select POWER_RESET_VEXPRESS
+	select POWER_SUPPLY
+	select REGULATOR if MMC_ARMMMCI
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	select VEXPRESS_CONFIG
+	help
+	  This option enables support for systems using Cortex processor based
+	  ARM core and logic (FPGA) tiles on the Versatile Express motherboard,
+	  for example:
+
+	  - CoreTile Express A5x2 (V2P-CA5s)
+	  - CoreTile Express A9x4 (V2P-CA9)
+	  - CoreTile Express A15x2 (V2P-CA15)
+	  - LogicTile Express 13MG (V2F-2XV6) with A5, A7, A9 or A15 SMMs
+	    (Soft Macrocell Models)
+	  - Versatile Express RTSMs (Models)
+
+	  You must boot using a Flattened Device Tree in order to use these
+	  platforms. The traditional (ATAGs) boot method is not usable on
+	  these boards with this option.
+
+if ARCH_VEXPRESS
+
+config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA
+	bool "Enable A5 and A9 only errata work-arounds"
+	default y
+	select ARM_ERRATA_643719 if SMP
+	select ARM_ERRATA_720789
+	select PL310_ERRATA_753970 if CACHE_L2X0
+	help
+	  Provides common dependencies for Versatile Express platforms
+	  based on Cortex-A5 and Cortex-A9 processors. In order to
+	  build a working kernel, you must also enable relevant core
+	  tile support or Flattened Device Tree based support options.
+
+config ARCH_VEXPRESS_DCSCB
+	bool "Dual Cluster System Control Block (DCSCB) support"
+	depends on MCPM
+	select ARM_CCI400_PORT_CTRL
+	help
+	  Support for the Dual Cluster System Configuration Block (DCSCB).
+	  This is needed to provide CPU and cluster power management
+	  on RTSM implementing big.LITTLE.
+
+config ARCH_VEXPRESS_SPC
+	bool "Versatile Express Serial Power Controller (SPC)"
+	select PM_OPP
+	help
+	  The TC2 (A15x2 A7x3) versatile express core tile integrates a logic
+	  block called Serial Power Controller (SPC) that provides the interface
+	  between the dual cluster test-chip and the M3 microcontroller that
+	  carries out power management.
+
+config ARCH_VEXPRESS_TC2_PM
+	bool "Versatile Express TC2 power management"
+	depends on MCPM
+	select ARM_CCI400_PORT_CTRL
+	select ARCH_VEXPRESS_SPC
+	select ARM_CPU_SUSPEND
+	help
+	  Support for CPU and cluster power management on Versatile Express
+	  with a TC2 (A15x2 A7x3) big.LITTLE core tile.
+
+endif