diff options
author | Hans de Goede <hdegoede@redhat.com> | 2015-06-16 17:27:47 +0300 |
---|---|---|
committer | Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 2015-06-19 02:10:36 +0300 |
commit | 14ca7a47d0ab2a7a35faab130e6d9682f8ff1a46 (patch) | |
tree | 1d55bf23f608947239ee8dfe8502e346c35baa97 /drivers/acpi/acpi_video.c | |
parent | a87878bafa1f82c20eddaf2d23780b194c35ccf5 (diff) |
acpi-video-detect: video: Make video_detect code part of the video module
This is a preparation patch for the backlight interface selection logic
cleanup, there are 2 reasons to not always build the video_detect code
into the kernel:
1) In order for the video_detect.c to also deal with / select native
backlight interfaces on win8 systems, instead of doing this in video.c
where it does not belong, video_detect.c needs to call into the backlight
class code. Which cannot be done if it is builtin and the blacklight class
is not.
2) Currently all the platform/x86 drivers which have quirks to prefer
the vendor driver over acpi-video call acpi_video_unregister_backlight()
to remove the acpi-video backlight interface, this logic really belongs
in video_detect.c, which will cause video_detect.c to depend on symbols of
video.c and video.c already depends on video_detect.c symbols, so they
really need to be a single module.
Note that this commits make 2 changes so as to maintain 100% kernel
commandline compatibility:
1) The __setup call for the acpi_backlight= handling is moved to
acpi/util.c as __setup may only be used by code which is alwasy builtin
2) video.c is renamed to acpi_video.c so that it can be combined with
video_detect.c into video.ko
This commit also makes changes to drivers/platform/x86/Kconfig to ensure
that drivers which use acpi_video_backlight_support() from video_detect.c,
will not be built-in when acpi_video is not built in. This also changes
some "select" uses to "depends on" to avoid dependency loops.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Diffstat (limited to 'drivers/acpi/acpi_video.c')
-rw-r--r-- | drivers/acpi/acpi_video.c | 2275 |
1 files changed, 2275 insertions, 0 deletions
diff --git a/drivers/acpi/acpi_video.c b/drivers/acpi/acpi_video.c new file mode 100644 index 000000000000..db4f353e1e5c --- /dev/null +++ b/drivers/acpi/acpi_video.c @@ -0,0 +1,2275 @@ +/* + * video.c - ACPI Video Driver + * + * Copyright (C) 2004 Luming Yu <luming.yu@intel.com> + * Copyright (C) 2004 Bruno Ducrot <ducrot@poupinou.org> + * Copyright (C) 2006 Thomas Tuttle <linux-kernel@ttuttle.net> + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/list.h> +#include <linux/mutex.h> +#include <linux/input.h> +#include <linux/backlight.h> +#include <linux/thermal.h> +#include <linux/sort.h> +#include <linux/pci.h> +#include <linux/pci_ids.h> +#include <linux/slab.h> +#include <linux/dmi.h> +#include <linux/suspend.h> +#include <linux/acpi.h> +#include <acpi/video.h> +#include <asm/uaccess.h> + +#define PREFIX "ACPI: " + +#define ACPI_VIDEO_BUS_NAME "Video Bus" +#define ACPI_VIDEO_DEVICE_NAME "Video Device" +#define ACPI_VIDEO_NOTIFY_SWITCH 0x80 +#define ACPI_VIDEO_NOTIFY_PROBE 0x81 +#define ACPI_VIDEO_NOTIFY_CYCLE 0x82 +#define ACPI_VIDEO_NOTIFY_NEXT_OUTPUT 0x83 +#define ACPI_VIDEO_NOTIFY_PREV_OUTPUT 0x84 + +#define ACPI_VIDEO_NOTIFY_CYCLE_BRIGHTNESS 0x85 +#define ACPI_VIDEO_NOTIFY_INC_BRIGHTNESS 0x86 +#define ACPI_VIDEO_NOTIFY_DEC_BRIGHTNESS 0x87 +#define ACPI_VIDEO_NOTIFY_ZERO_BRIGHTNESS 0x88 +#define ACPI_VIDEO_NOTIFY_DISPLAY_OFF 0x89 + +#define MAX_NAME_LEN 20 + +#define _COMPONENT ACPI_VIDEO_COMPONENT +ACPI_MODULE_NAME("video"); + +MODULE_AUTHOR("Bruno Ducrot"); +MODULE_DESCRIPTION("ACPI Video Driver"); +MODULE_LICENSE("GPL"); + +static bool brightness_switch_enabled = 1; +module_param(brightness_switch_enabled, bool, 0644); + +/* + * By default, we don't allow duplicate ACPI video bus devices + * under the same VGA controller + */ +static bool allow_duplicates; +module_param(allow_duplicates, bool, 0644); + +/* + * For Windows 8 systems: used to decide if video module + * should skip registering backlight interface of its own. + */ +enum { + NATIVE_BACKLIGHT_NOT_SET = -1, + NATIVE_BACKLIGHT_OFF, + NATIVE_BACKLIGHT_ON, +}; + +static int use_native_backlight_param = NATIVE_BACKLIGHT_NOT_SET; +module_param_named(use_native_backlight, use_native_backlight_param, int, 0444); +static int use_native_backlight_dmi = NATIVE_BACKLIGHT_NOT_SET; + +static int disable_backlight_sysfs_if = -1; +module_param(disable_backlight_sysfs_if, int, 0444); + +static int register_count; +static struct mutex video_list_lock; +static struct list_head video_bus_head; +static int acpi_video_bus_add(struct acpi_device *device); +static int acpi_video_bus_remove(struct acpi_device *device); +static void acpi_video_bus_notify(struct acpi_device *device, u32 event); + +static const struct acpi_device_id video_device_ids[] = { + {ACPI_VIDEO_HID, 0}, + {"", 0}, +}; +MODULE_DEVICE_TABLE(acpi, video_device_ids); + +static struct acpi_driver acpi_video_bus = { + .name = "video", + .class = ACPI_VIDEO_CLASS, + .ids = video_device_ids, + .ops = { + .add = acpi_video_bus_add, + .remove = acpi_video_bus_remove, + .notify = acpi_video_bus_notify, + }, +}; + +struct acpi_video_bus_flags { + u8 multihead:1; /* can switch video heads */ + u8 rom:1; /* can retrieve a video rom */ + u8 post:1; /* can configure the head to */ + u8 reserved:5; +}; + +struct acpi_video_bus_cap { + u8 _DOS:1; /* Enable/Disable output switching */ + u8 _DOD:1; /* Enumerate all devices attached to display adapter */ + u8 _ROM:1; /* Get ROM Data */ + u8 _GPD:1; /* Get POST Device */ + u8 _SPD:1; /* Set POST Device */ + u8 _VPO:1; /* Video POST Options */ + u8 reserved:2; +}; + +struct acpi_video_device_attrib { + u32 display_index:4; /* A zero-based instance of the Display */ + u32 display_port_attachment:4; /* This field differentiates the display type */ + u32 display_type:4; /* Describe the specific type in use */ + u32 vendor_specific:4; /* Chipset Vendor Specific */ + u32 bios_can_detect:1; /* BIOS can detect the device */ + u32 depend_on_vga:1; /* Non-VGA output device whose power is related to + the VGA device. */ + u32 pipe_id:3; /* For VGA multiple-head devices. */ + u32 reserved:10; /* Must be 0 */ + u32 device_id_scheme:1; /* Device ID Scheme */ +}; + +struct acpi_video_enumerated_device { + union { + u32 int_val; + struct acpi_video_device_attrib attrib; + } value; + struct acpi_video_device *bind_info; +}; + +struct acpi_video_bus { + struct acpi_device *device; + bool backlight_registered; + bool backlight_notifier_registered; + u8 dos_setting; + struct acpi_video_enumerated_device *attached_array; + u8 attached_count; + u8 child_count; + struct acpi_video_bus_cap cap; + struct acpi_video_bus_flags flags; + struct list_head video_device_list; + struct mutex device_list_lock; /* protects video_device_list */ + struct list_head entry; + struct input_dev *input; + char phys[32]; /* for input device */ + struct notifier_block pm_nb; + struct notifier_block backlight_nb; +}; + +struct acpi_video_device_flags { + u8 crt:1; + u8 lcd:1; + u8 tvout:1; + u8 dvi:1; + u8 bios:1; + u8 unknown:1; + u8 notify:1; + u8 reserved:1; +}; + +struct acpi_video_device_cap { + u8 _ADR:1; /* Return the unique ID */ + u8 _BCL:1; /* Query list of brightness control levels supported */ + u8 _BCM:1; /* Set the brightness level */ + u8 _BQC:1; /* Get current brightness level */ + u8 _BCQ:1; /* Some buggy BIOS uses _BCQ instead of _BQC */ + u8 _DDC:1; /* Return the EDID for this device */ +}; + +struct acpi_video_brightness_flags { + u8 _BCL_no_ac_battery_levels:1; /* no AC/Battery levels in _BCL */ + u8 _BCL_reversed:1; /* _BCL package is in a reversed order */ + u8 _BQC_use_index:1; /* _BQC returns an index value */ +}; + +struct acpi_video_device_brightness { + int curr; + int count; + int *levels; + struct acpi_video_brightness_flags flags; +}; + +struct acpi_video_device { + unsigned long device_id; + struct acpi_video_device_flags flags; + struct acpi_video_device_cap cap; + struct list_head entry; + struct delayed_work switch_brightness_work; + int switch_brightness_event; + struct acpi_video_bus *video; + struct acpi_device *dev; + struct acpi_video_device_brightness *brightness; + struct backlight_device *backlight; + struct thermal_cooling_device *cooling_dev; +}; + +static const char device_decode[][30] = { + "motherboard VGA device", + "PCI VGA device", + "AGP VGA device", + "UNKNOWN", +}; + +static void acpi_video_device_notify(acpi_handle handle, u32 event, void *data); +static void acpi_video_device_rebind(struct acpi_video_bus *video); +static void acpi_video_device_bind(struct acpi_video_bus *video, + struct acpi_video_device *device); +static int acpi_video_device_enumerate(struct acpi_video_bus *video); +static int acpi_video_device_lcd_set_level(struct acpi_video_device *device, + int level); +static int acpi_video_device_lcd_get_level_current( + struct acpi_video_device *device, + unsigned long long *level, bool raw); +static int acpi_video_get_next_level(struct acpi_video_device *device, + u32 level_current, u32 event); +static void acpi_video_switch_brightness(struct work_struct *work); + +static bool acpi_video_use_native_backlight(void) +{ + if (use_native_backlight_param != NATIVE_BACKLIGHT_NOT_SET) + return use_native_backlight_param; + else if (use_native_backlight_dmi != NATIVE_BACKLIGHT_NOT_SET) + return use_native_backlight_dmi; + return acpi_osi_is_win8(); +} + +bool acpi_video_verify_backlight_support(void) +{ + if (acpi_video_use_native_backlight() && + backlight_device_registered(BACKLIGHT_RAW)) + return false; + return acpi_video_backlight_support(); +} +EXPORT_SYMBOL_GPL(acpi_video_verify_backlight_support); + +/* backlight device sysfs support */ +static int acpi_video_get_brightness(struct backlight_device *bd) +{ + unsigned long long cur_level; + int i; + struct acpi_video_device *vd = bl_get_data(bd); + + if (acpi_video_device_lcd_get_level_current(vd, &cur_level, false)) + return -EINVAL; + for (i = 2; i < vd->brightness->count; i++) { + if (vd->brightness->levels[i] == cur_level) + /* + * The first two entries are special - see page 575 + * of the ACPI spec 3.0 + */ + return i - 2; + } + return 0; +} + +static int acpi_video_set_brightness(struct backlight_device *bd) +{ + int request_level = bd->props.brightness + 2; + struct acpi_video_device *vd = bl_get_data(bd); + + cancel_delayed_work(&vd->switch_brightness_work); + return acpi_video_device_lcd_set_level(vd, + vd->brightness->levels[request_level]); +} + +static const struct backlight_ops acpi_backlight_ops = { + .get_brightness = acpi_video_get_brightness, + .update_status = acpi_video_set_brightness, +}; + +/* thermal cooling device callbacks */ +static int video_get_max_state(struct thermal_cooling_device *cooling_dev, unsigned + long *state) +{ + struct acpi_device *device = cooling_dev->devdata; + struct acpi_video_device *video = acpi_driver_data(device); + + *state = video->brightness->count - 3; + return 0; +} + +static int video_get_cur_state(struct thermal_cooling_device *cooling_dev, unsigned + long *state) +{ + struct acpi_device *device = cooling_dev->devdata; + struct acpi_video_device *video = acpi_driver_data(device); + unsigned long long level; + int offset; + + if (acpi_video_device_lcd_get_level_current(video, &level, false)) + return -EINVAL; + for (offset = 2; offset < video->brightness->count; offset++) + if (level == video->brightness->levels[offset]) { + *state = video->brightness->count - offset - 1; + return 0; + } + + return -EINVAL; +} + +static int +video_set_cur_state(struct thermal_cooling_device *cooling_dev, unsigned long state) +{ + struct acpi_device *device = cooling_dev->devdata; + struct acpi_video_device *video = acpi_driver_data(device); + int level; + + if (state >= video->brightness->count - 2) + return -EINVAL; + + state = video->brightness->count - state; + level = video->brightness->levels[state - 1]; + return acpi_video_device_lcd_set_level(video, level); +} + +static const struct thermal_cooling_device_ops video_cooling_ops = { + .get_max_state = video_get_max_state, + .get_cur_state = video_get_cur_state, + .set_cur_state = video_set_cur_state, +}; + +/* + * -------------------------------------------------------------------------- + * Video Management + * -------------------------------------------------------------------------- + */ + +static int +acpi_video_device_lcd_query_levels(struct acpi_video_device *device, + union acpi_object **levels) +{ + int status; + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + union acpi_object *obj; + + + *levels = NULL; + + status = acpi_evaluate_object(device->dev->handle, "_BCL", NULL, &buffer); + if (!ACPI_SUCCESS(status)) + return status; + obj = (union acpi_object *)buffer.pointer; + if (!obj || (obj->type != ACPI_TYPE_PACKAGE)) { + printk(KERN_ERR PREFIX "Invalid _BCL data\n"); + status = -EFAULT; + goto err; + } + + *levels = obj; + + return 0; + +err: + kfree(buffer.pointer); + + return status; +} + +static int +acpi_video_device_lcd_set_level(struct acpi_video_device *device, int level) +{ + int status; + int state; + + status = acpi_execute_simple_method(device->dev->handle, + "_BCM", level); + if (ACPI_FAILURE(status)) { + ACPI_ERROR((AE_INFO, "Evaluating _BCM failed")); + return -EIO; + } + + device->brightness->curr = level; + for (state = 2; state < device->brightness->count; state++) + if (level == device->brightness->levels[state]) { + if (device->backlight) + device->backlight->props.brightness = state - 2; + return 0; + } + + ACPI_ERROR((AE_INFO, "Current brightness invalid")); + return -EINVAL; +} + +/* + * For some buggy _BQC methods, we need to add a constant value to + * the _BQC return value to get the actual current brightness level + */ + +static int bqc_offset_aml_bug_workaround; +static int __init video_set_bqc_offset(const struct dmi_system_id *d) +{ + bqc_offset_aml_bug_workaround = 9; + return 0; +} + +static int __init video_disable_native_backlight(const struct dmi_system_id *d) +{ + use_native_backlight_dmi = NATIVE_BACKLIGHT_OFF; + return 0; +} + +static int __init video_enable_native_backlight(const struct dmi_system_id *d) +{ + use_native_backlight_dmi = NATIVE_BACKLIGHT_ON; + return 0; +} + +static int __init video_disable_backlight_sysfs_if( + const struct dmi_system_id *d) +{ + if (disable_backlight_sysfs_if == -1) + disable_backlight_sysfs_if = 1; + return 0; +} + +static struct dmi_system_id video_dmi_table[] __initdata = { + /* + * Broken _BQC workaround http://bugzilla.kernel.org/show_bug.cgi?id=13121 + */ + { + .callback = video_set_bqc_offset, + .ident = "Acer Aspire 5720", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5720"), + }, + }, + { + .callback = video_set_bqc_offset, + .ident = "Acer Aspire 5710Z", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5710Z"), + }, + }, + { + .callback = video_set_bqc_offset, + .ident = "eMachines E510", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "EMACHINES"), + DMI_MATCH(DMI_PRODUCT_NAME, "eMachines E510"), + }, + }, + { + .callback = video_set_bqc_offset, + .ident = "Acer Aspire 5315", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5315"), + }, + }, + { + .callback = video_set_bqc_offset, + .ident = "Acer Aspire 7720", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 7720"), + }, + }, + + /* + * These models have a working acpi_video backlight control, and using + * native backlight causes a regression where backlight does not work + * when userspace is not handling brightness key events. Disable + * native_backlight on these to fix this: + * https://bugzilla.kernel.org/show_bug.cgi?id=81691 + */ + { + .callback = video_disable_native_backlight, + .ident = "ThinkPad T420", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T420"), + }, + }, + { + .callback = video_disable_native_backlight, + .ident = "ThinkPad T520", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T520"), + }, + }, + { + .callback = video_disable_native_backlight, + .ident = "ThinkPad X201s", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X201s"), + }, + }, + + /* The native backlight controls do not work on some older machines */ + { + /* https://bugs.freedesktop.org/show_bug.cgi?id=81515 */ + .callback = video_disable_native_backlight, + .ident = "HP ENVY 15 Notebook", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP ENVY 15 Notebook PC"), + }, + }, + + { + .callback = video_disable_native_backlight, + .ident = "SAMSUNG 870Z5E/880Z5E/680Z5E", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_PRODUCT_NAME, "870Z5E/880Z5E/680Z5E"), + }, + }, + { + .callback = video_disable_native_backlight, + .ident = "SAMSUNG 370R4E/370R4V/370R5E/3570RE/370R5V", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_PRODUCT_NAME, "370R4E/370R4V/370R5E/3570RE/370R5V"), + }, + }, + { + /* https://bugzilla.redhat.com/show_bug.cgi?id=1186097 */ + .callback = video_disable_native_backlight, + .ident = "SAMSUNG 3570R/370R/470R/450R/510R/4450RV", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_PRODUCT_NAME, "3570R/370R/470R/450R/510R/4450RV"), + }, + }, + { + /* https://bugzilla.redhat.com/show_bug.cgi?id=1094948 */ + .callback = video_disable_native_backlight, + .ident = "SAMSUNG 730U3E/740U3E", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_PRODUCT_NAME, "730U3E/740U3E"), + }, + }, + { + /* https://bugs.freedesktop.org/show_bug.cgi?id=87286 */ + .callback = video_disable_native_backlight, + .ident = "SAMSUNG 900X3C/900X3D/900X3E/900X4C/900X4D", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_PRODUCT_NAME, "900X3C/900X3D/900X3E/900X4C/900X4D"), + }, + }, + + { + /* https://bugzilla.redhat.com/show_bug.cgi?id=1163574 */ + .callback = video_disable_native_backlight, + .ident = "Dell XPS15 L521X", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "XPS L521X"), + }, + }, + + /* Non win8 machines which need native backlight nevertheless */ + { + /* https://bugzilla.redhat.com/show_bug.cgi?id=1187004 */ + .callback = video_enable_native_backlight, + .ident = "Lenovo Ideapad Z570", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_NAME, "102434U"), + }, + }, + { + /* https://bugzilla.redhat.com/show_bug.cgi?id=1217249 */ + .callback = video_enable_native_backlight, + .ident = "Apple MacBook Pro 12,1", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro12,1"), + }, + }, + + /* + * Some machines have a broken acpi-video interface for brightness + * control, but still need an acpi_video_device_lcd_set_level() call + * on resume to turn the backlight power on. We Enable backlight + * control on these systems, but do not register a backlight sysfs + * as brightness control does not work. + */ + { + /* https://bugs.freedesktop.org/show_bug.cgi?id=82634 */ + .callback = video_disable_backlight_sysfs_if, + .ident = "Toshiba Portege R830", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE R830"), + }, + }, + {} +}; + +static unsigned long long +acpi_video_bqc_value_to_level(struct acpi_video_device *device, + unsigned long long bqc_value) +{ + unsigned long long level; + + if (device->brightness->flags._BQC_use_index) { + /* + * _BQC returns an index that doesn't account for + * the first 2 items with special meaning, so we need + * to compensate for that by offsetting ourselves + */ + if (device->brightness->flags._BCL_reversed) + bqc_value = device->brightness->count - 3 - bqc_value; + + level = device->brightness->levels[bqc_value + 2]; + } else { + level = bqc_value; + } + + level += bqc_offset_aml_bug_workaround; + + return level; +} + +static int +acpi_video_device_lcd_get_level_current(struct acpi_video_device *device, + unsigned long long *level, bool raw) +{ + acpi_status status = AE_OK; + int i; + + if (device->cap._BQC || device->cap._BCQ) { + char *buf = device->cap._BQC ? "_BQC" : "_BCQ"; + + status = acpi_evaluate_integer(device->dev->handle, buf, + NULL, level); + if (ACPI_SUCCESS(status)) { + if (raw) { + /* + * Caller has indicated he wants the raw + * value returned by _BQC, so don't furtherly + * mess with the value. + */ + return 0; + } + + *level = acpi_video_bqc_value_to_level(device, *level); + + for (i = 2; i < device->brightness->count; i++) + if (device->brightness->levels[i] == *level) { + device->brightness->curr = *level; + return 0; + } + /* + * BQC returned an invalid level. + * Stop using it. + */ + ACPI_WARNING((AE_INFO, + "%s returned an invalid level", + buf)); + device->cap._BQC = device->cap._BCQ = 0; + } else { + /* + * Fixme: + * should we return an error or ignore this failure? + * dev->brightness->curr is a cached value which stores + * the correct current backlight level in most cases. + * ACPI video backlight still works w/ buggy _BQC. + * http://bugzilla.kernel.org/show_bug.cgi?id=12233 + */ + ACPI_WARNING((AE_INFO, "Evaluating %s failed", buf)); + device->cap._BQC = device->cap._BCQ = 0; + } + } + + *level = device->brightness->curr; + return 0; +} + +static int +acpi_video_device_EDID(struct acpi_video_device *device, + union acpi_object **edid, ssize_t length) +{ + int status; + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + union acpi_object *obj; + union acpi_object arg0 = { ACPI_TYPE_INTEGER }; + struct acpi_object_list args = { 1, &arg0 }; + + + *edid = NULL; + + if (!device) + return -ENODEV; + if (length == 128) + arg0.integer.value = 1; + else if (length == 256) + arg0.integer.value = 2; + else + return -EINVAL; + + status = acpi_evaluate_object(device->dev->handle, "_DDC", &args, &buffer); + if (ACPI_FAILURE(status)) + return -ENODEV; + + obj = buffer.pointer; + + if (obj && obj->type == ACPI_TYPE_BUFFER) + *edid = obj; + else { + printk(KERN_ERR PREFIX "Invalid _DDC data\n"); + status = -EFAULT; + kfree(obj); + } + + return status; +} + +/* bus */ + +/* + * Arg: + * video : video bus device pointer + * bios_flag : + * 0. The system BIOS should NOT automatically switch(toggle) + * the active display output. + * 1. The system BIOS should automatically switch (toggle) the + * active display output. No switch event. + * 2. The _DGS value should be locked. + * 3. The system BIOS should not automatically switch (toggle) the + * active display output, but instead generate the display switch + * event notify code. + * lcd_flag : + * 0. The system BIOS should automatically control the brightness level + * of the LCD when the power changes from AC to DC + * 1. The system BIOS should NOT automatically control the brightness + * level of the LCD when the power changes from AC to DC. + * Return Value: + * -EINVAL wrong arg. + */ + +static int +acpi_video_bus_DOS(struct acpi_video_bus *video, int bios_flag, int lcd_flag) +{ + acpi_status status; + + if (!video->cap._DOS) + return 0; + + if (bios_flag < 0 || bios_flag > 3 || lcd_flag < 0 || lcd_flag > 1) + return -EINVAL; + video->dos_setting = (lcd_flag << 2) | bios_flag; + status = acpi_execute_simple_method(video->device->handle, "_DOS", + (lcd_flag << 2) | bios_flag); + if (ACPI_FAILURE(status)) + return -EIO; + + return 0; +} + +/* + * Simple comparison function used to sort backlight levels. + */ + +static int +acpi_video_cmp_level(const void *a, const void *b) +{ + return *(int *)a - *(int *)b; +} + +/* + * Decides if _BQC/_BCQ for this system is usable + * + * We do this by changing the level first and then read out the current + * brightness level, if the value does not match, find out if it is using + * index. If not, clear the _BQC/_BCQ capability. + */ +static int acpi_video_bqc_quirk(struct acpi_video_device *device, + int max_level, int current_level) +{ + struct acpi_video_device_brightness *br = device->brightness; + int result; + unsigned long long level; + int test_level; + + /* don't mess with existing known broken systems */ + if (bqc_offset_aml_bug_workaround) + return 0; + + /* + * Some systems always report current brightness level as maximum + * through _BQC, we need to test another value for them. + */ + test_level = current_level == max_level ? br->levels[3] : max_level; + + result = acpi_video_device_lcd_set_level(device, test_level); + if (result) + return result; + + result = acpi_video_device_lcd_get_level_current(device, &level, true); + if (result) + return result; + + if (level != test_level) { + /* buggy _BQC found, need to find out if it uses index */ + if (level < br->count) { + if (br->flags._BCL_reversed) + level = br->count - 3 - level; + if (br->levels[level + 2] == test_level) + br->flags._BQC_use_index = 1; + } + + if (!br->flags._BQC_use_index) + device->cap._BQC = device->cap._BCQ = 0; + } + + return 0; +} + + +/* + * Arg: + * device : video output device (LCD, CRT, ..) + * + * Return Value: + * Maximum brightness level + * + * Allocate and initialize device->brightness. + */ + +static int +acpi_video_init_brightness(struct acpi_video_device *device) +{ + union acpi_object *obj = NULL; + int i, max_level = 0, count = 0, level_ac_battery = 0; + unsigned long long level, level_old; + union acpi_object *o; + struct acpi_video_device_brightness *br = NULL; + int result = -EINVAL; + u32 value; + + if (!ACPI_SUCCESS(acpi_video_device_lcd_query_levels(device, &obj))) { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Could not query available " + "LCD brightness level\n")); + goto out; + } + + if (obj->package.count < 2) + goto out; + + br = kzalloc(sizeof(*br), GFP_KERNEL); + if (!br) { + printk(KERN_ERR "can't allocate memory\n"); + result = -ENOMEM; + goto out; + } + + br->levels = kmalloc((obj->package.count + 2) * sizeof *(br->levels), + GFP_KERNEL); + if (!br->levels) { + result = -ENOMEM; + goto out_free; + } + + for (i = 0; i < obj->package.count; i++) { + o = (union acpi_object *)&obj->package.elements[i]; + if (o->type != ACPI_TYPE_INTEGER) { + printk(KERN_ERR PREFIX "Invalid data\n"); + continue; + } + value = (u32) o->integer.value; + /* Skip duplicate entries */ + if (count > 2 && br->levels[count - 1] == value) + continue; + + br->levels[count] = value; + + if (br->levels[count] > max_level) + max_level = br->levels[count]; + count++; + } + + /* + * some buggy BIOS don't export the levels + * when machine is on AC/Battery in _BCL package. + * In this case, the first two elements in _BCL packages + * are also supported brightness levels that OS should take care of. + */ + for (i = 2; i < count; i++) { + if (br->levels[i] == br->levels[0]) + level_ac_battery++; + if (br->levels[i] == br->levels[1]) + level_ac_battery++; + } + + if (level_ac_battery < 2) { + level_ac_battery = 2 - level_ac_battery; + br->flags._BCL_no_ac_battery_levels = 1; + for (i = (count - 1 + level_ac_battery); i >= 2; i--) + br->levels[i] = br->levels[i - level_ac_battery]; + count += level_ac_battery; + } else if (level_ac_battery > 2) + ACPI_ERROR((AE_INFO, "Too many duplicates in _BCL package")); + + /* Check if the _BCL package is in a reversed order */ + if (max_level == br->levels[2]) { + br->flags._BCL_reversed = 1; + sort(&br->levels[2], count - 2, sizeof(br->levels[2]), + acpi_video_cmp_level, NULL); + } else if (max_level != br->levels[count - 1]) + ACPI_ERROR((AE_INFO, + "Found unordered _BCL package")); + + br->count = count; + device->brightness = br; + + /* _BQC uses INDEX while _BCL uses VALUE in some laptops */ + br->curr = level = max_level; + + if (!device->cap._BQC) + goto set_level; + + result = acpi_video_device_lcd_get_level_current(device, + &level_old, true); + if (result) + goto out_free_levels; + + result = acpi_video_bqc_quirk(device, max_level, level_old); + if (result) + goto out_free_levels; + /* + * cap._BQC may get cleared due to _BQC is found to be broken + * in acpi_video_bqc_quirk, so check again here. + */ + if (!device->cap._BQC) + goto set_level; + + level = acpi_video_bqc_value_to_level(device, level_old); + /* + * On some buggy laptops, _BQC returns an uninitialized + * value when invoked for the first time, i.e. + * level_old is invalid (no matter whether it's a level + * or an index). Set the backlight to max_level in this case. + */ + for (i = 2; i < br->count; i++) + if (level == br->levels[i]) + break; + if (i == br->count || !level) + level = max_level; + +set_level: + result = acpi_video_device_lcd_set_level(device, level); + if (result) + goto out_free_levels; + + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "found %d brightness levels\n", count - 2)); + kfree(obj); + return result; + +out_free_levels: + kfree(br->levels); +out_free: + kfree(br); +out: + device->brightness = NULL; + kfree(obj); + return result; +} + +/* + * Arg: + * device : video output device (LCD, CRT, ..) + * + * Return Value: + * None + * + * Find out all required AML methods defined under the output + * device. + */ + +static void acpi_video_device_find_cap(struct acpi_video_device *device) +{ + if (acpi_has_method(device->dev->handle, "_ADR")) + device->cap._ADR = 1; + if (acpi_has_method(device->dev->handle, "_BCL")) + device->cap._BCL = 1; + if (acpi_has_method(device->dev->handle, "_BCM")) + device->cap._BCM = 1; + if (acpi_has_method(device->dev->handle, "_BQC")) { + device->cap._BQC = 1; + } else if (acpi_has_method(device->dev->handle, "_BCQ")) { + printk(KERN_WARNING FW_BUG "_BCQ is used instead of _BQC\n"); + device->cap._BCQ = 1; + } + + if (acpi_has_method(device->dev->handle, "_DDC")) + device->cap._DDC = 1; +} + +/* + * Arg: + * device : video output device (VGA) + * + * Return Value: + * None + * + * Find out all required AML methods defined under the video bus device. + */ + +static void acpi_video_bus_find_cap(struct acpi_video_bus *video) +{ + if (acpi_has_method(video->device->handle, "_DOS")) + video->cap._DOS = 1; + if (acpi_has_method(video->device->handle, "_DOD")) + video->cap._DOD = 1; + if (acpi_has_method(video->device->handle, "_ROM")) + video->cap._ROM = 1; + if (acpi_has_method(video->device->handle, "_GPD")) + video->cap._GPD = 1; + if (acpi_has_method(video->device->handle, "_SPD")) + video->cap._SPD = 1; + if (acpi_has_method(video->device->handle, "_VPO")) + video->cap._VPO = 1; +} + +/* + * Check whether the video bus device has required AML method to + * support the desired features + */ + +static int acpi_video_bus_check(struct acpi_video_bus *video) +{ + acpi_status status = -ENOENT; + struct pci_dev *dev; + + if (!video) + return -EINVAL; + + dev = acpi_get_pci_dev(video->device->handle); + if (!dev) + return -ENODEV; + pci_dev_put(dev); + + /* + * Since there is no HID, CID and so on for VGA driver, we have + * to check well known required nodes. + */ + + /* Does this device support video switching? */ + if (video->cap._DOS || video->cap._DOD) { + if (!video->cap._DOS) { + printk(KERN_WARNING FW_BUG + "ACPI(%s) defines _DOD but not _DOS\n", + acpi_device_bid(video->device)); + } + video->flags.multihead = 1; + status = 0; + } + + /* Does this device support retrieving a video ROM? */ + if (video->cap._ROM) { + video->flags.rom = 1; + status = 0; + } + + /* Does this device support configuring which video device to POST? */ + if (video->cap._GPD && video->cap._SPD && video->cap._VPO) { + video->flags.post = 1; + status = 0; + } + + return status; +} + +/* + * -------------------------------------------------------------------------- + * Driver Interface + * -------------------------------------------------------------------------- + */ + +/* device interface */ +static struct acpi_video_device_attrib * +acpi_video_get_device_attr(struct acpi_video_bus *video, unsigned long device_id) +{ + struct acpi_video_enumerated_device *ids; + int i; + + for (i = 0; i < video->attached_count; i++) { + ids = &video->attached_array[i]; + if ((ids->value.int_val & 0xffff) == device_id) + return &ids->value.attrib; + } + + return NULL; +} + +static int +acpi_video_get_device_type(struct acpi_video_bus *video, + unsigned long device_id) +{ + struct acpi_video_enumerated_device *ids; + int i; + + for (i = 0; i < video->attached_count; i++) { + ids = &video->attached_array[i]; + if ((ids->value.int_val & 0xffff) == device_id) + return ids->value.int_val; + } + + return 0; +} + +static int +acpi_video_bus_get_one_device(struct acpi_device *device, + struct acpi_video_bus *video) +{ + unsigned long long device_id; + int status, device_type; + struct acpi_video_device *data; + struct acpi_video_device_attrib *attribute; + + status = + acpi_evaluate_integer(device->handle, "_ADR", NULL, &device_id); + /* Some device omits _ADR, we skip them instead of fail */ + if (ACPI_FAILURE(status)) + return 0; + + data = kzalloc(sizeof(struct acpi_video_device), GFP_KERNEL); + if (!data) + return -ENOMEM; + + strcpy(acpi_device_name(device), ACPI_VIDEO_DEVICE_NAME); + strcpy(acpi_device_class(device), ACPI_VIDEO_CLASS); + device->driver_data = data; + + data->device_id = device_id; + data->video = video; + data->dev = device; + INIT_DELAYED_WORK(&data->switch_brightness_work, + acpi_video_switch_brightness); + + attribute = acpi_video_get_device_attr(video, device_id); + + if (attribute && attribute->device_id_scheme) { + switch (attribute->display_type) { + case ACPI_VIDEO_DISPLAY_CRT: + data->flags.crt = 1; + break; + case ACPI_VIDEO_DISPLAY_TV: + data->flags.tvout = 1; + break; + case ACPI_VIDEO_DISPLAY_DVI: + data->flags.dvi = 1; + break; + case ACPI_VIDEO_DISPLAY_LCD: + data->flags.lcd = 1; + break; + default: + data->flags.unknown = 1; + break; + } + if (attribute->bios_can_detect) + data->flags.bios = 1; + } else { + /* Check for legacy IDs */ + device_type = acpi_video_get_device_type(video, device_id); + /* Ignore bits 16 and 18-20 */ + switch (device_type & 0xffe2ffff) { + case ACPI_VIDEO_DISPLAY_LEGACY_MONITOR: + data->flags.crt = 1; + break; + case ACPI_VIDEO_DISPLAY_LEGACY_PANEL: + data->flags.lcd = 1; + break; + case ACPI_VIDEO_DISPLAY_LEGACY_TV: + data->flags.tvout = 1; + break; + default: + data->flags.unknown = 1; + } + } + + acpi_video_device_bind(video, data); + acpi_video_device_find_cap(data); + + mutex_lock(&video->device_list_lock); + list_add_tail(&data->entry, &video->video_device_list); + mutex_unlock(&video->device_list_lock); + + return status; +} + +/* + * Arg: + * video : video bus device + * + * Return: + * none + * + * Enumerate the video device list of the video bus, + * bind the ids with the corresponding video devices + * under the video bus. + */ + +static void acpi_video_device_rebind(struct acpi_video_bus *video) +{ + struct acpi_video_device *dev; + + mutex_lock(&video->device_list_lock); + + list_for_each_entry(dev, &video->video_device_list, entry) + acpi_video_device_bind(video, dev); + + mutex_unlock(&video->device_list_lock); +} + +/* + * Arg: + * video : video bus device + * device : video output device under the video + * bus + * + * Return: + * none + * + * Bind the ids with the corresponding video devices + * under the video bus. + */ + +static void +acpi_video_device_bind(struct acpi_video_bus *video, + struct acpi_video_device *device) +{ + struct acpi_video_enumerated_device *ids; + int i; + + for (i = 0; i < video->attached_count; i++) { + ids = &video->attached_array[i]; + if (device->device_id == (ids->value.int_val & 0xffff)) { + ids->bind_info = device; + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "device_bind %d\n", i)); + } + } +} + +static bool acpi_video_device_in_dod(struct acpi_video_device *device) +{ + struct acpi_video_bus *video = device->video; + int i; + + /* + * If we have a broken _DOD or we have more than 8 output devices + * under the graphics controller node that we can't proper deal with + * in the operation region code currently, no need to test. + */ + if (!video->attached_count || video->child_count > 8) + return true; + + for (i = 0; i < video->attached_count; i++) { + if ((video->attached_array[i].value.int_val & 0xfff) == + (device->device_id & 0xfff)) + return true; + } + + return false; +} + +/* + * Arg: + * video : video bus device + * + * Return: + * < 0 : error + * + * Call _DOD to enumerate all devices attached to display adapter + * + */ + +static int acpi_video_device_enumerate(struct acpi_video_bus *video) +{ + int status; + int count; + int i; + struct acpi_video_enumerated_device *active_list; + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + union acpi_object *dod = NULL; + union acpi_object *obj; + + status = acpi_evaluate_object(video->device->handle, "_DOD", NULL, &buffer); + if (!ACPI_SUCCESS(status)) { + ACPI_EXCEPTION((AE_INFO, status, "Evaluating _DOD")); + return status; + } + + dod = buffer.pointer; + if (!dod || (dod->type != ACPI_TYPE_PACKAGE)) { + ACPI_EXCEPTION((AE_INFO, status, "Invalid _DOD data")); + status = -EFAULT; + goto out; + } + + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found %d video heads in _DOD\n", + dod->package.count)); + + active_list = kcalloc(1 + dod->package.count, + sizeof(struct acpi_video_enumerated_device), + GFP_KERNEL); + if (!active_list) { + status = -ENOMEM; + goto out; + } + + count = 0; + for (i = 0; i < dod->package.count; i++) { + obj = &dod->package.elements[i]; + + if (obj->type != ACPI_TYPE_INTEGER) { + printk(KERN_ERR PREFIX + "Invalid _DOD data in element %d\n", i); + continue; + } + + active_list[count].value.int_val = obj->integer.value; + active_list[count].bind_info = NULL; + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "dod element[%d] = %d\n", i, + (int)obj->integer.value)); + count++; + } + + kfree(video->attached_array); + + video->attached_array = active_list; + video->attached_count = count; + +out: + kfree(buffer.pointer); + return status; +} + +static int +acpi_video_get_next_level(struct acpi_video_device *device, + u32 level_current, u32 event) +{ + int min, max, min_above, max_below, i, l, delta = 255; + max = max_below = 0; + min = min_above = 255; + /* Find closest level to level_current */ + for (i = 2; i < device->brightness->count; i++) { + l = device->brightness->levels[i]; + if (abs(l - level_current) < abs(delta)) { + delta = l - level_current; + if (!delta) + break; + } + } + /* Ajust level_current to closest available level */ + level_current += delta; + for (i = 2; i < device->brightness->count; i++) { + l = device->brightness->levels[i]; + if (l < min) + min = l; + if (l > max) + max = l; + if (l < min_above && l > level_current) + min_above = l; + if (l > max_below && l < level_current) + max_below = l; + } + + switch (event) { + case ACPI_VIDEO_NOTIFY_CYCLE_BRIGHTNESS: + return (level_current < max) ? min_above : min; + case ACPI_VIDEO_NOTIFY_INC_BRIGHTNESS: + return (level_current < max) ? min_above : max; + case ACPI_VIDEO_NOTIFY_DEC_BRIGHTNESS: + return (level_current > min) ? max_below : min; + case ACPI_VIDEO_NOTIFY_ZERO_BRIGHTNESS: + case ACPI_VIDEO_NOTIFY_DISPLAY_OFF: + return 0; + default: + return level_current; + } +} + +static void +acpi_video_switch_brightness(struct work_struct *work) +{ + struct acpi_video_device *device = container_of(to_delayed_work(work), + struct acpi_video_device, switch_brightness_work); + unsigned long long level_current, level_next; + int event = device->switch_brightness_event; + int result = -EINVAL; + + /* no warning message if acpi_backlight=vendor or a quirk is used */ + if (!device->backlight) + return; + + if (!device->brightness) + goto out; + + result = acpi_video_device_lcd_get_level_current(device, + &level_current, + false); + if (result) + goto out; + + level_next = acpi_video_get_next_level(device, level_current, event); + + result = acpi_video_device_lcd_set_level(device, level_next); + + if (!result) + backlight_force_update(device->backlight, + BACKLIGHT_UPDATE_HOTKEY); + +out: + if (result) + printk(KERN_ERR PREFIX "Failed to switch the brightness\n"); +} + +int acpi_video_get_edid(struct acpi_device *device, int type, int device_id, + void **edid) +{ + struct acpi_video_bus *video; + struct acpi_video_device *video_device; + union acpi_object *buffer = NULL; + acpi_status status; + int i, length; + + if (!device || !acpi_driver_data(device)) + return -EINVAL; + + video = acpi_driver_data(device); + + for (i = 0; i < video->attached_count; i++) { + video_device = video->attached_array[i].bind_info; + length = 256; + + if (!video_device) + continue; + + if (!video_device->cap._DDC) + continue; + + if (type) { + switch (type) { + case ACPI_VIDEO_DISPLAY_CRT: + if (!video_device->flags.crt) + continue; + break; + case ACPI_VIDEO_DISPLAY_TV: + if (!video_device->flags.tvout) + continue; + break; + case ACPI_VIDEO_DISPLAY_DVI: + if (!video_device->flags.dvi) + continue; + break; + case ACPI_VIDEO_DISPLAY_LCD: + if (!video_device->flags.lcd) + continue; + break; + } + } else if (video_device->device_id != device_id) { + continue; + } + + status = acpi_video_device_EDID(video_device, &buffer, length); + + if (ACPI_FAILURE(status) || !buffer || + buffer->type != ACPI_TYPE_BUFFER) { + length = 128; + status = acpi_video_device_EDID(video_device, &buffer, + length); + if (ACPI_FAILURE(status) || !buffer || + buffer->type != ACPI_TYPE_BUFFER) { + continue; + } + } + + *edid = buffer->buffer.pointer; + return length; + } + + return -ENODEV; +} +EXPORT_SYMBOL(acpi_video_get_edid); + +static int +acpi_video_bus_get_devices(struct acpi_video_bus *video, + struct acpi_device *device) +{ + int status = 0; + struct acpi_device *dev; + + /* + * There are systems where video module known to work fine regardless + * of broken _DOD and ignoring returned value here doesn't cause + * any issues later. + */ + acpi_video_device_enumerate(video); + + list_for_each_entry(dev, &device->children, node) { + + status = acpi_video_bus_get_one_device(dev, video); + if (status) { + dev_err(&dev->dev, "Can't attach device\n"); + break; + } + video->child_count++; + } + return status; +} + +/* acpi_video interface */ + +/* + * Win8 requires setting bit2 of _DOS to let firmware know it shouldn't + * preform any automatic brightness change on receiving a notification. + */ +static int acpi_video_bus_start_devices(struct acpi_video_bus *video) +{ + return acpi_video_bus_DOS(video, 0, + acpi_osi_is_win8() ? 1 : 0); +} + +static int acpi_video_bus_stop_devices(struct acpi_video_bus *video) +{ + return acpi_video_bus_DOS(video, 0, + acpi_osi_is_win8() ? 0 : 1); +} + +static void acpi_video_bus_notify(struct acpi_device *device, u32 event) +{ + struct acpi_video_bus *video = acpi_driver_data(device); + struct input_dev *input; + int keycode = 0; + + if (!video || !video->input) + return; + + input = video->input; + + switch (event) { + case ACPI_VIDEO_NOTIFY_SWITCH: /* User requested a switch, + * most likely via hotkey. */ + keycode = KEY_SWITCHVIDEOMODE; + break; + + case ACPI_VIDEO_NOTIFY_PROBE: /* User plugged in or removed a video + * connector. */ + acpi_video_device_enumerate(video); + acpi_video_device_rebind(video); + keycode = KEY_SWITCHVIDEOMODE; + break; + + case ACPI_VIDEO_NOTIFY_CYCLE: /* Cycle Display output hotkey pressed. */ + keycode = KEY_SWITCHVIDEOMODE; + break; + case ACPI_VIDEO_NOTIFY_NEXT_OUTPUT: /* Next Display output hotkey pressed. */ + keycode = KEY_VIDEO_NEXT; + break; + case ACPI_VIDEO_NOTIFY_PREV_OUTPUT: /* previous Display output hotkey pressed. */ + keycode = KEY_VIDEO_PREV; + break; + + default: + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "Unsupported event [0x%x]\n", event)); + break; + } + + if (acpi_notifier_call_chain(device, event, 0)) + /* Something vetoed the keypress. */ + keycode = 0; + + if (keycode) { + input_report_key(input, keycode, 1); + input_sync(input); + input_report_key(input, keycode, 0); + input_sync(input); + } + + return; +} + +static void brightness_switch_event(struct acpi_video_device *video_device, + u32 event) +{ + if (!brightness_switch_enabled) + return; + + video_device->switch_brightness_event = event; + schedule_delayed_work(&video_device->switch_brightness_work, HZ / 10); +} + +static void acpi_video_device_notify(acpi_handle handle, u32 event, void *data) +{ + struct acpi_video_device *video_device = data; + struct acpi_device *device = NULL; + struct acpi_video_bus *bus; + struct input_dev *input; + int keycode = 0; + + if (!video_device) + return; + + device = video_device->dev; + bus = video_device->video; + input = bus->input; + + switch (event) { + case ACPI_VIDEO_NOTIFY_CYCLE_BRIGHTNESS: /* Cycle brightness */ + brightness_switch_event(video_device, event); + keycode = KEY_BRIGHTNESS_CYCLE; + break; + case ACPI_VIDEO_NOTIFY_INC_BRIGHTNESS: /* Increase brightness */ + brightness_switch_event(video_device, event); + keycode = KEY_BRIGHTNESSUP; + break; + case ACPI_VIDEO_NOTIFY_DEC_BRIGHTNESS: /* Decrease brightness */ + brightness_switch_event(video_device, event); + keycode = KEY_BRIGHTNESSDOWN; + break; + case ACPI_VIDEO_NOTIFY_ZERO_BRIGHTNESS: /* zero brightness */ + brightness_switch_event(video_device, event); + keycode = KEY_BRIGHTNESS_ZERO; + break; + case ACPI_VIDEO_NOTIFY_DISPLAY_OFF: /* display device off */ + brightness_switch_event(video_device, event); + keycode = KEY_DISPLAY_OFF; + break; + default: + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "Unsupported event [0x%x]\n", event)); + break; + } + + acpi_notifier_call_chain(device, event, 0); + + if (keycode) { + input_report_key(input, keycode, 1); + input_sync(input); + input_report_key(input, keycode, 0); + input_sync(input); + } + + return; +} + +static int acpi_video_resume(struct notifier_block *nb, + unsigned long val, void *ign) +{ + struct acpi_video_bus *video; + struct acpi_video_device *video_device; + int i; + + switch (val) { + case PM_HIBERNATION_PREPARE: + case PM_SUSPEND_PREPARE: + case PM_RESTORE_PREPARE: + return NOTIFY_DONE; + } + + video = container_of(nb, struct acpi_video_bus, pm_nb); + + dev_info(&video->device->dev, "Restoring backlight state\n"); + + for (i = 0; i < video->attached_count; i++) { + video_device = video->attached_array[i].bind_info; + if (video_device && video_device->brightness) + acpi_video_device_lcd_set_level(video_device, + video_device->brightness->curr); + } + + return NOTIFY_OK; +} + +static acpi_status +acpi_video_bus_match(acpi_handle handle, u32 level, void *context, + void **return_value) +{ + struct acpi_device *device = context; + struct acpi_device *sibling; + int result; + + if (handle == device->handle) + return AE_CTRL_TERMINATE; + + result = acpi_bus_get_device(handle, &sibling); + if (result) + return AE_OK; + + if (!strcmp(acpi_device_name(sibling), ACPI_VIDEO_BUS_NAME)) + return AE_ALREADY_EXISTS; + + return AE_OK; +} + +static void acpi_video_dev_register_backlight(struct acpi_video_device *device) +{ + struct backlight_properties props; + struct pci_dev *pdev; + acpi_handle acpi_parent; + struct device *parent = NULL; + int result; + static int count; + char *name; + + /* + * Do not create backlight device for video output + * device that is not in the enumerated list. + */ + if (!acpi_video_device_in_dod(device)) { + dev_dbg(&device->dev->dev, "not in _DOD list, ignore\n"); + return; + } + + result = acpi_video_init_brightness(device); + if (result) + return; + + if (disable_backlight_sysfs_if > 0) + return; + + name = kasprintf(GFP_KERNEL, "acpi_video%d", count); + if (!name) + return; + count++; + + acpi_get_parent(device->dev->handle, &acpi_parent); + + pdev = acpi_get_pci_dev(acpi_parent); + if (pdev) { + parent = &pdev->dev; + pci_dev_put(pdev); + } + + memset(&props, 0, sizeof(struct backlight_properties)); + props.type = BACKLIGHT_FIRMWARE; + props.max_brightness = device->brightness->count - 3; + device->backlight = backlight_device_register(name, + parent, + device, + &acpi_backlight_ops, + &props); + kfree(name); + if (IS_ERR(device->backlight)) { + device->backlight = NULL; + return; + } + + /* + * Save current brightness level in case we have to restore it + * before acpi_video_device_lcd_set_level() is called next time. + */ + device->backlight->props.brightness = + acpi_video_get_brightness(device->backlight); + + device->cooling_dev = thermal_cooling_device_register("LCD", + device->dev, &video_cooling_ops); + if (IS_ERR(device->cooling_dev)) { + /* + * Set cooling_dev to NULL so we don't crash trying to free it. + * Also, why the hell we are returning early and not attempt to + * register video output if cooling device registration failed? + * -- dtor + */ + device->cooling_dev = NULL; + return; + } + + dev_info(&device->dev->dev, "registered as cooling_device%d\n", + device->cooling_dev->id); + result = sysfs_create_link(&device->dev->dev.kobj, + &device->cooling_dev->device.kobj, + "thermal_cooling"); + if (result) + printk(KERN_ERR PREFIX "Create sysfs link\n"); + result = sysfs_create_link(&device->cooling_dev->device.kobj, + &device->dev->dev.kobj, "device"); + if (result) + printk(KERN_ERR PREFIX "Create sysfs link\n"); +} + +static void acpi_video_run_bcl_for_osi(struct acpi_video_bus *video) +{ + struct acpi_video_device *dev; + union acpi_object *levels; + + mutex_lock(&video->device_list_lock); + list_for_each_entry(dev, &video->video_device_list, entry) { + if (!acpi_video_device_lcd_query_levels(dev, &levels)) + kfree(levels); + } + mutex_unlock(&video->device_list_lock); +} + +static int acpi_video_bus_register_backlight(struct acpi_video_bus *video) +{ + struct acpi_video_device *dev; + + if (video->backlight_registered) + return 0; + + acpi_video_run_bcl_for_osi(video); + + if (!acpi_video_verify_backlight_support()) + return 0; + + mutex_lock(&video->device_list_lock); + list_for_each_entry(dev, &video->video_device_list, entry) + acpi_video_dev_register_backlight(dev); + mutex_unlock(&video->device_list_lock); + + video->backlight_registered = true; + + video->pm_nb.notifier_call = acpi_video_resume; + video->pm_nb.priority = 0; + return register_pm_notifier(&video->pm_nb); +} + +static void acpi_video_dev_unregister_backlight(struct acpi_video_device *device) +{ + if (device->backlight) { + backlight_device_unregister(device->backlight); + device->backlight = NULL; + } + if (device->brightness) { + kfree(device->brightness->levels); + kfree(device->brightness); + device->brightness = NULL; + } + if (device->cooling_dev) { + sysfs_remove_link(&device->dev->dev.kobj, "thermal_cooling"); + sysfs_remove_link(&device->cooling_dev->device.kobj, "device"); + thermal_cooling_device_unregister(device->cooling_dev); + device->cooling_dev = NULL; + } +} + +static int acpi_video_bus_unregister_backlight(struct acpi_video_bus *video) +{ + struct acpi_video_device *dev; + int error; + + if (!video->backlight_registered) + return 0; + + error = unregister_pm_notifier(&video->pm_nb); + + mutex_lock(&video->device_list_lock); + list_for_each_entry(dev, &video->video_device_list, entry) + acpi_video_dev_unregister_backlight(dev); + mutex_unlock(&video->device_list_lock); + + video->backlight_registered = false; + + return error; +} + +static void acpi_video_dev_add_notify_handler(struct acpi_video_device *device) +{ + acpi_status status; + struct acpi_device *adev = device->dev; + + status = acpi_install_notify_handler(adev->handle, ACPI_DEVICE_NOTIFY, + acpi_video_device_notify, device); + if (ACPI_FAILURE(status)) + dev_err(&adev->dev, "Error installing notify handler\n"); + else + device->flags.notify = 1; +} + +static int acpi_video_bus_add_notify_handler(struct acpi_video_bus *video) +{ + struct input_dev *input; + struct acpi_video_device *dev; + int error; + + video->input = input = input_allocate_device(); + if (!input) { + error = -ENOMEM; + goto out; + } + + error = acpi_video_bus_start_devices(video); + if (error) + goto err_free_input; + + snprintf(video->phys, sizeof(video->phys), + "%s/video/input0", acpi_device_hid(video->device)); + + input->name = acpi_device_name(video->device); + input->phys = video->phys; + input->id.bustype = BUS_HOST; + input->id.product = 0x06; + input->dev.parent = &video->device->dev; + input->evbit[0] = BIT(EV_KEY); + set_bit(KEY_SWITCHVIDEOMODE, input->keybit); + set_bit(KEY_VIDEO_NEXT, input->keybit); + set_bit(KEY_VIDEO_PREV, input->keybit); + set_bit(KEY_BRIGHTNESS_CYCLE, input->keybit); + set_bit(KEY_BRIGHTNESSUP, input->keybit); + set_bit(KEY_BRIGHTNESSDOWN, input->keybit); + set_bit(KEY_BRIGHTNESS_ZERO, input->keybit); + set_bit(KEY_DISPLAY_OFF, input->keybit); + + error = input_register_device(input); + if (error) + goto err_stop_dev; + + mutex_lock(&video->device_list_lock); + list_for_each_entry(dev, &video->video_device_list, entry) + acpi_video_dev_add_notify_handler(dev); + mutex_unlock(&video->device_list_lock); + + return 0; + +err_stop_dev: + acpi_video_bus_stop_devices(video); +err_free_input: + input_free_device(input); + video->input = NULL; +out: + return error; +} + +static void acpi_video_dev_remove_notify_handler(struct acpi_video_device *dev) +{ + if (dev->flags.notify) { + acpi_remove_notify_handler(dev->dev->handle, ACPI_DEVICE_NOTIFY, + acpi_video_device_notify); + dev->flags.notify = 0; + } +} + +static void acpi_video_bus_remove_notify_handler(struct acpi_video_bus *video) +{ + struct acpi_video_device *dev; + + mutex_lock(&video->device_list_lock); + list_for_each_entry(dev, &video->video_device_list, entry) + acpi_video_dev_remove_notify_handler(dev); + mutex_unlock(&video->device_list_lock); + + acpi_video_bus_stop_devices(video); + input_unregister_device(video->input); + video->input = NULL; +} + +static int acpi_video_backlight_notify(struct notifier_block *nb, + unsigned long val, void *bd) +{ + struct backlight_device *backlight = bd; + struct acpi_video_bus *video; + + /* acpi_video_verify_backlight_support only cares about raw devices */ + if (backlight->props.type != BACKLIGHT_RAW) + return NOTIFY_DONE; + + video = container_of(nb, struct acpi_video_bus, backlight_nb); + + switch (val) { + case BACKLIGHT_REGISTERED: + if (!acpi_video_verify_backlight_support()) + acpi_video_bus_unregister_backlight(video); + break; + case BACKLIGHT_UNREGISTERED: + acpi_video_bus_register_backlight(video); + break; + } + + return NOTIFY_OK; +} + +static int acpi_video_bus_add_backlight_notify_handler( + struct acpi_video_bus *video) +{ + int error; + + video->backlight_nb.notifier_call = acpi_video_backlight_notify; + video->backlight_nb.priority = 0; + error = backlight_register_notifier(&video->backlight_nb); + if (error == 0) + video->backlight_notifier_registered = true; + + return error; +} + +static int acpi_video_bus_remove_backlight_notify_handler( + struct acpi_video_bus *video) +{ + if (!video->backlight_notifier_registered) + return 0; + + video->backlight_notifier_registered = false; + + return backlight_unregister_notifier(&video->backlight_nb); +} + +static int acpi_video_bus_put_devices(struct acpi_video_bus *video) +{ + struct acpi_video_device *dev, *next; + + mutex_lock(&video->device_list_lock); + list_for_each_entry_safe(dev, next, &video->video_device_list, entry) { + list_del(&dev->entry); + kfree(dev); + } + mutex_unlock(&video->device_list_lock); + + return 0; +} + +static int instance; + +static int acpi_video_bus_add(struct acpi_device *device) +{ + struct acpi_video_bus *video; + int error; + acpi_status status; + + status = acpi_walk_namespace(ACPI_TYPE_DEVICE, + device->parent->handle, 1, + acpi_video_bus_match, NULL, + device, NULL); + if (status == AE_ALREADY_EXISTS) { + printk(KERN_WARNING FW_BUG + "Duplicate ACPI video bus devices for the" + " same VGA controller, please try module " + "parameter \"video.allow_duplicates=1\"" + "if the current driver doesn't work.\n"); + if (!allow_duplicates) + return -ENODEV; + } + + video = kzalloc(sizeof(struct acpi_video_bus), GFP_KERNEL); + if (!video) + return -ENOMEM; + + /* a hack to fix the duplicate name "VID" problem on T61 */ + if (!strcmp(device->pnp.bus_id, "VID")) { + if (instance) + device->pnp.bus_id[3] = '0' + instance; + instance++; + } + /* a hack to fix the duplicate name "VGA" problem on Pa 3553 */ + if (!strcmp(device->pnp.bus_id, "VGA")) { + if (instance) + device->pnp.bus_id[3] = '0' + instance; + instance++; + } + + video->device = device; + strcpy(acpi_device_name(device), ACPI_VIDEO_BUS_NAME); + strcpy(acpi_device_class(device), ACPI_VIDEO_CLASS); + device->driver_data = video; + + acpi_video_bus_find_cap(video); + error = acpi_video_bus_check(video); + if (error) + goto err_free_video; + + mutex_init(&video->device_list_lock); + INIT_LIST_HEAD(&video->video_device_list); + + error = acpi_video_bus_get_devices(video, device); + if (error) + goto err_put_video; + + printk(KERN_INFO PREFIX "%s [%s] (multi-head: %s rom: %s post: %s)\n", + ACPI_VIDEO_DEVICE_NAME, acpi_device_bid(device), + video->flags.multihead ? "yes" : "no", + video->flags.rom ? "yes" : "no", + video->flags.post ? "yes" : "no"); + mutex_lock(&video_list_lock); + list_add_tail(&video->entry, &video_bus_head); + mutex_unlock(&video_list_lock); + + acpi_video_bus_register_backlight(video); + acpi_video_bus_add_notify_handler(video); + acpi_video_bus_add_backlight_notify_handler(video); + + return 0; + +err_put_video: + acpi_video_bus_put_devices(video); + kfree(video->attached_array); +err_free_video: + kfree(video); + device->driver_data = NULL; + + return error; +} + +static int acpi_video_bus_remove(struct acpi_device *device) +{ + struct acpi_video_bus *video = NULL; + + + if (!device || !acpi_driver_data(device)) + return -EINVAL; + + video = acpi_driver_data(device); + + acpi_video_bus_remove_backlight_notify_handler(video); + acpi_video_bus_remove_notify_handler(video); + acpi_video_bus_unregister_backlight(video); + acpi_video_bus_put_devices(video); + + mutex_lock(&video_list_lock); + list_del(&video->entry); + mutex_unlock(&video_list_lock); + + kfree(video->attached_array); + kfree(video); + + return 0; +} + +static int __init is_i740(struct pci_dev *dev) +{ + if (dev->device == 0x00D1) + return 1; + if (dev->device == 0x7000) + return 1; + return 0; +} + +static int __init intel_opregion_present(void) +{ + int opregion = 0; + struct pci_dev *dev = NULL; + u32 address; + + for_each_pci_dev(dev) { + if ((dev->class >> 8) != PCI_CLASS_DISPLAY_VGA) + continue; + if (dev->vendor != PCI_VENDOR_ID_INTEL) + continue; + /* We don't want to poke around undefined i740 registers */ + if (is_i740(dev)) + continue; + pci_read_config_dword(dev, 0xfc, &address); + if (!address) + continue; + opregion = 1; + } + return opregion; +} + +int acpi_video_register(void) +{ + int ret; + + if (register_count) { + /* + * if the function of acpi_video_register is already called, + * don't register the acpi_vide_bus again and return no error. + */ + return 0; + } + + mutex_init(&video_list_lock); + INIT_LIST_HEAD(&video_bus_head); + + ret = acpi_bus_register_driver(&acpi_video_bus); + if (ret) + return ret; + + /* + * When the acpi_video_bus is loaded successfully, increase + * the counter reference. + */ + register_count = 1; + + return 0; +} +EXPORT_SYMBOL(acpi_video_register); + +void acpi_video_unregister(void) +{ + if (!register_count) { + /* + * If the acpi video bus is already unloaded, don't + * unload it again and return directly. + */ + return; + } + acpi_bus_unregister_driver(&acpi_video_bus); + + register_count = 0; + + return; +} +EXPORT_SYMBOL(acpi_video_unregister); + +void acpi_video_unregister_backlight(void) +{ + struct acpi_video_bus *video; + + if (!register_count) + return; + + mutex_lock(&video_list_lock); + list_for_each_entry(video, &video_bus_head, entry) + acpi_video_bus_unregister_backlight(video); + mutex_unlock(&video_list_lock); +} +EXPORT_SYMBOL(acpi_video_unregister_backlight); + +/* + * This is kind of nasty. Hardware using Intel chipsets may require + * the video opregion code to be run first in order to initialise + * state before any ACPI video calls are made. To handle this we defer + * registration of the video class until the opregion code has run. + */ + +static int __init acpi_video_init(void) +{ + /* + * Let the module load even if ACPI is disabled (e.g. due to + * a broken BIOS) so that i915.ko can still be loaded on such + * old systems without an AcpiOpRegion. + * + * acpi_video_register() will report -ENODEV later as well due + * to acpi_disabled when i915.ko tries to register itself afterwards. + */ + if (acpi_disabled) + return 0; + + dmi_check_system(video_dmi_table); + + if (intel_opregion_present()) + return 0; + + return acpi_video_register(); +} + +static void __exit acpi_video_exit(void) +{ + acpi_video_unregister(); + + return; +} + +module_init(acpi_video_init); +module_exit(acpi_video_exit); |