diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-17 02:20:36 +0400 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-17 02:20:36 +0400 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/atm/horizon.h |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/atm/horizon.h')
-rw-r--r-- | drivers/atm/horizon.h | 508 |
1 files changed, 508 insertions, 0 deletions
diff --git a/drivers/atm/horizon.h b/drivers/atm/horizon.h new file mode 100644 index 000000000000..e2cc7020fa3b --- /dev/null +++ b/drivers/atm/horizon.h @@ -0,0 +1,508 @@ +/* + Madge Horizon ATM Adapter driver. + Copyright (C) 1995-1999 Madge Networks Ltd. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + The GNU GPL is contained in /usr/doc/copyright/GPL on a Debian + system and in the file COPYING in the Linux kernel source. +*/ + +/* + IMPORTANT NOTE: Madge Networks no longer makes the adapters + supported by this driver and makes no commitment to maintain it. +*/ + +/* too many macros - change to inline functions */ + +#ifndef DRIVER_ATM_HORIZON_H +#define DRIVER_ATM_HORIZON_H + +#include <linux/config.h> + +#ifdef CONFIG_ATM_HORIZON_DEBUG +#define DEBUG_HORIZON +#endif + +#define DEV_LABEL "hrz" + +#ifndef PCI_VENDOR_ID_MADGE +#define PCI_VENDOR_ID_MADGE 0x10B6 +#endif +#ifndef PCI_DEVICE_ID_MADGE_HORIZON +#define PCI_DEVICE_ID_MADGE_HORIZON 0x1000 +#endif + +// diagnostic output + +#define PRINTK(severity,format,args...) \ + printk(severity DEV_LABEL ": " format "\n" , ## args) + +#ifdef DEBUG_HORIZON + +#define DBG_ERR 0x0001 +#define DBG_WARN 0x0002 +#define DBG_INFO 0x0004 +#define DBG_VCC 0x0008 +#define DBG_QOS 0x0010 +#define DBG_TX 0x0020 +#define DBG_RX 0x0040 +#define DBG_SKB 0x0080 +#define DBG_IRQ 0x0100 +#define DBG_FLOW 0x0200 +#define DBG_BUS 0x0400 +#define DBG_REGS 0x0800 +#define DBG_DATA 0x1000 +#define DBG_MASK 0x1fff + +/* the ## prevents the annoying double expansion of the macro arguments */ +/* KERN_INFO is used since KERN_DEBUG often does not make it to the console */ +#define PRINTDB(bits,format,args...) \ + ( (debug & (bits)) ? printk (KERN_INFO DEV_LABEL ": " format , ## args) : 1 ) +#define PRINTDM(bits,format,args...) \ + ( (debug & (bits)) ? printk (format , ## args) : 1 ) +#define PRINTDE(bits,format,args...) \ + ( (debug & (bits)) ? printk (format "\n" , ## args) : 1 ) +#define PRINTD(bits,format,args...) \ + ( (debug & (bits)) ? printk (KERN_INFO DEV_LABEL ": " format "\n" , ## args) : 1 ) + +#else + +#define PRINTD(bits,format,args...) +#define PRINTDB(bits,format,args...) +#define PRINTDM(bits,format,args...) +#define PRINTDE(bits,format,args...) + +#endif + +#define PRINTDD(sec,fmt,args...) +#define PRINTDDB(sec,fmt,args...) +#define PRINTDDM(sec,fmt,args...) +#define PRINTDDE(sec,fmt,args...) + +// fixed constants + +#define SPARE_BUFFER_POOL_SIZE MAX_VCS +#define HRZ_MAX_VPI 4 +#define MIN_PCI_LATENCY 48 // 24 IS TOO SMALL + +/* Horizon specific bits */ +/* Register offsets */ + +#define HRZ_IO_EXTENT 0x80 + +#define DATA_PORT_OFF 0x00 +#define TX_CHANNEL_PORT_OFF 0x04 +#define TX_DESCRIPTOR_PORT_OFF 0x08 +#define MEMORY_PORT_OFF 0x0C +#define MEM_WR_ADDR_REG_OFF 0x14 +#define MEM_RD_ADDR_REG_OFF 0x18 +#define CONTROL_0_REG 0x1C +#define INT_SOURCE_REG_OFF 0x20 +#define INT_ENABLE_REG_OFF 0x24 +#define MASTER_RX_ADDR_REG_OFF 0x28 +#define MASTER_RX_COUNT_REG_OFF 0x2C +#define MASTER_TX_ADDR_REG_OFF 0x30 +#define MASTER_TX_COUNT_REG_OFF 0x34 +#define TX_DESCRIPTOR_REG_OFF 0x38 +#define TX_CHANNEL_CONFIG_COMMAND_OFF 0x40 +#define TX_CHANNEL_CONFIG_DATA_OFF 0x44 +#define TX_FREE_BUFFER_COUNT_OFF 0x48 +#define RX_FREE_BUFFER_COUNT_OFF 0x4C +#define TX_CONFIG_OFF 0x50 +#define TX_STATUS_OFF 0x54 +#define RX_CONFIG_OFF 0x58 +#define RX_LINE_CONFIG_OFF 0x5C +#define RX_QUEUE_RD_PTR_OFF 0x60 +#define RX_QUEUE_WR_PTR_OFF 0x64 +#define MAX_AAL5_CELL_COUNT_OFF 0x68 +#define RX_CHANNEL_PORT_OFF 0x6C +#define TX_CELL_COUNT_OFF 0x70 +#define RX_CELL_COUNT_OFF 0x74 +#define HEC_ERROR_COUNT_OFF 0x78 +#define UNASSIGNED_CELL_COUNT_OFF 0x7C + +/* Register bit definitions */ + +/* Control 0 register */ + +#define SEEPROM_DO 0x00000001 +#define SEEPROM_DI 0x00000002 +#define SEEPROM_SK 0x00000004 +#define SEEPROM_CS 0x00000008 +#define DEBUG_BIT_0 0x00000010 +#define DEBUG_BIT_1 0x00000020 +#define DEBUG_BIT_2 0x00000040 +// RESERVED 0x00000080 +#define DEBUG_BIT_0_OE 0x00000100 +#define DEBUG_BIT_1_OE 0x00000200 +#define DEBUG_BIT_2_OE 0x00000400 +// RESERVED 0x00000800 +#define DEBUG_BIT_0_STATE 0x00001000 +#define DEBUG_BIT_1_STATE 0x00002000 +#define DEBUG_BIT_2_STATE 0x00004000 +// RESERVED 0x00008000 +#define GENERAL_BIT_0 0x00010000 +#define GENERAL_BIT_1 0x00020000 +#define GENERAL_BIT_2 0x00040000 +#define GENERAL_BIT_3 0x00080000 +#define RESET_HORIZON 0x00100000 +#define RESET_ATM 0x00200000 +#define RESET_RX 0x00400000 +#define RESET_TX 0x00800000 +#define RESET_HOST 0x01000000 +// RESERVED 0x02000000 +#define TARGET_RETRY_DISABLE 0x04000000 +#define ATM_LAYER_SELECT 0x08000000 +#define ATM_LAYER_STATUS 0x10000000 +// RESERVED 0xE0000000 + +/* Interrupt source and enable registers */ + +#define RX_DATA_AV 0x00000001 +#define RX_DISABLED 0x00000002 +#define TIMING_MARKER 0x00000004 +#define FORCED 0x00000008 +#define RX_BUS_MASTER_COMPLETE 0x00000010 +#define TX_BUS_MASTER_COMPLETE 0x00000020 +#define ABR_TX_CELL_COUNT_INT 0x00000040 +#define DEBUG_INT 0x00000080 +// RESERVED 0xFFFFFF00 + +/* PIO and Bus Mastering */ + +#define MAX_PIO_COUNT 0x000000ff // 255 - make tunable? +// 8188 is a hard limit for bus mastering +#define MAX_TRANSFER_COUNT 0x00001ffc // 8188 +#define MASTER_TX_AUTO_APPEND_DESC 0x80000000 + +/* TX channel config command port */ + +#define PCR_TIMER_ACCESS 0x0000 +#define SCR_TIMER_ACCESS 0x0001 +#define BUCKET_CAPACITY_ACCESS 0x0002 +#define BUCKET_FULLNESS_ACCESS 0x0003 +#define RATE_TYPE_ACCESS 0x0004 +// UNUSED 0x00F8 +#define TX_CHANNEL_CONFIG_MULT 0x0100 +// UNUSED 0xF800 +#define BUCKET_MAX_SIZE 0x003f + +/* TX channel config data port */ + +#define CLOCK_SELECT_SHIFT 4 +#define CLOCK_DISABLE 0x00ff + +#define IDLE_RATE_TYPE 0x0 +#define ABR_RATE_TYPE 0x1 +#define VBR_RATE_TYPE 0x2 +#define CBR_RATE_TYPE 0x3 + +/* TX config register */ + +#define DRVR_DRVRBAR_ENABLE 0x0001 +#define TXCLK_MUX_SELECT_RCLK 0x0002 +#define TRANSMIT_TIMING_MARKER 0x0004 +#define LOOPBACK_TIMING_MARKER 0x0008 +#define TX_TEST_MODE_16MHz 0x0000 +#define TX_TEST_MODE_8MHz 0x0010 +#define TX_TEST_MODE_5_33MHz 0x0020 +#define TX_TEST_MODE_4MHz 0x0030 +#define TX_TEST_MODE_3_2MHz 0x0040 +#define TX_TEST_MODE_2_66MHz 0x0050 +#define TX_TEST_MODE_2_29MHz 0x0060 +#define TX_NORMAL_OPERATION 0x0070 +#define ABR_ROUND_ROBIN 0x0080 + +/* TX status register */ + +#define IDLE_CHANNELS_MASK 0x00FF +#define ABR_CELL_COUNT_REACHED_MULT 0x0100 +#define ABR_CELL_COUNT_REACHED_MASK 0xFF + +/* RX config register */ + +#define NON_USER_CELLS_IN_ONE_CHANNEL 0x0008 +#define RX_ENABLE 0x0010 +#define IGNORE_UNUSED_VPI_VCI_BITS_SET 0x0000 +#define NON_USER_UNUSED_VPI_VCI_BITS_SET 0x0020 +#define DISCARD_UNUSED_VPI_VCI_BITS_SET 0x0040 + +/* RX line config register */ + +#define SIGNAL_LOSS 0x0001 +#define FREQUENCY_DETECT_ERROR 0x0002 +#define LOCK_DETECT_ERROR 0x0004 +#define SELECT_INTERNAL_LOOPBACK 0x0008 +#define LOCK_DETECT_ENABLE 0x0010 +#define FREQUENCY_DETECT_ENABLE 0x0020 +#define USER_FRAQ 0x0040 +#define GXTALOUT_SELECT_DIV4 0x0080 +#define GXTALOUT_SELECT_NO_GATING 0x0100 +#define TIMING_MARKER_RECEIVED 0x0200 + +/* RX channel port */ + +#define RX_CHANNEL_MASK 0x03FF +// UNUSED 0x3C00 +#define FLUSH_CHANNEL 0x4000 +#define RX_CHANNEL_UPDATE_IN_PROGRESS 0x8000 + +/* Receive queue entry */ + +#define RX_Q_ENTRY_LENGTH_MASK 0x0000FFFF +#define RX_Q_ENTRY_CHANNEL_SHIFT 16 +#define SIMONS_DODGEY_MARKER 0x08000000 +#define RX_CONGESTION_EXPERIENCED 0x10000000 +#define RX_CRC_10_OK 0x20000000 +#define RX_CRC_32_OK 0x40000000 +#define RX_COMPLETE_FRAME 0x80000000 + +/* Offsets and constants for use with the buffer memory */ + +/* Buffer pointers and channel types */ + +#define BUFFER_PTR_MASK 0x0000FFFF +#define RX_INT_THRESHOLD_MULT 0x00010000 +#define RX_INT_THRESHOLD_MASK 0x07FF +#define INT_EVERY_N_CELLS 0x08000000 +#define CONGESTION_EXPERIENCED 0x10000000 +#define FIRST_CELL_OF_AAL5_FRAME 0x20000000 +#define CHANNEL_TYPE_AAL5 0x00000000 +#define CHANNEL_TYPE_RAW_CELLS 0x40000000 +#define CHANNEL_TYPE_AAL3_4 0x80000000 + +/* Buffer status stuff */ + +#define BUFF_STATUS_MASK 0x00030000 +#define BUFF_STATUS_EMPTY 0x00000000 +#define BUFF_STATUS_CELL_AV 0x00010000 +#define BUFF_STATUS_LAST_CELL_AV 0x00020000 + +/* Transmit channel stuff */ + +/* Receive channel stuff */ + +#define RX_CHANNEL_DISABLED 0x00000000 +#define RX_CHANNEL_IDLE 0x00000001 + +/* General things */ + +#define INITIAL_CRC 0xFFFFFFFF + +// A Horizon u32, a byte! Really nasty. Horizon pointers are (32 bit) +// word addresses and so standard C pointer operations break (as they +// assume byte addresses); so we pretend that Horizon words (and word +// pointers) are bytes (and byte pointers) for the purposes of having +// a memory map that works. + +typedef u8 HDW; + +typedef struct cell_buf { + HDW payload[12]; + HDW next; + HDW cell_count; // AAL5 rx bufs + HDW res; + union { + HDW partial_crc; // AAL5 rx bufs + HDW cell_header; // RAW bufs + } u; +} cell_buf; + +typedef struct tx_ch_desc { + HDW rd_buf_type; + HDW wr_buf_type; + HDW partial_crc; + HDW cell_header; +} tx_ch_desc; + +typedef struct rx_ch_desc { + HDW wr_buf_type; + HDW rd_buf_type; +} rx_ch_desc; + +typedef struct rx_q_entry { + HDW entry; +} rx_q_entry; + +#define TX_CHANS 8 +#define RX_CHANS 1024 +#define RX_QS 1024 +#define MAX_VCS RX_CHANS + +/* Horizon buffer memory map */ + +// TX Channel Descriptors 2 +// TX Initial Buffers 8 // TX_CHANS +#define BUFN1_SIZE 118 // (126 - TX_CHANS) +// RX/TX Start/End Buffers 4 +#define BUFN2_SIZE 124 +// RX Queue Entries 64 +#define BUFN3_SIZE 192 +// RX Channel Descriptors 128 +#define BUFN4_SIZE 1408 +// TOTAL cell_buff chunks 2048 + +// cell_buf bufs[2048]; +// HDW dws[32768]; + +typedef struct MEMMAP { + tx_ch_desc tx_descs[TX_CHANS]; // 8 * 4 = 32 , 0x0020 + cell_buf inittxbufs[TX_CHANS]; // these are really + cell_buf bufn1[BUFN1_SIZE]; // part of this pool + cell_buf txfreebufstart; + cell_buf txfreebufend; + cell_buf rxfreebufstart; + cell_buf rxfreebufend; // 8+118+1+1+1+1+124 = 254 + cell_buf bufn2[BUFN2_SIZE]; // 16 * 254 = 4064 , 0x1000 + rx_q_entry rx_q_entries[RX_QS]; // 1 * 1024 = 1024 , 0x1400 + cell_buf bufn3[BUFN3_SIZE]; // 16 * 192 = 3072 , 0x2000 + rx_ch_desc rx_descs[MAX_VCS]; // 2 * 1024 = 2048 , 0x2800 + cell_buf bufn4[BUFN4_SIZE]; // 16 * 1408 = 22528 , 0x8000 +} MEMMAP; + +#define memmap ((MEMMAP *)0) + +/* end horizon specific bits */ + +typedef enum { + aal0, + aal34, + aal5 +} hrz_aal; + +typedef enum { + tx_busy, + rx_busy, + ultra +} hrz_flags; + +// a single struct pointed to by atm_vcc->dev_data + +typedef struct { + unsigned int tx_rate; + unsigned int rx_rate; + u16 channel; + u16 tx_xbr_bits; + u16 tx_pcr_bits; +#if 0 + u16 tx_scr_bits; + u16 tx_bucket_bits; +#endif + hrz_aal aal; +} hrz_vcc; + +struct hrz_dev { + + u32 iobase; + u32 * membase; + + struct sk_buff * rx_skb; // skb being RXed + unsigned int rx_bytes; // bytes remaining to RX within region + void * rx_addr; // addr to send bytes to (for PIO) + unsigned int rx_channel; // channel that the skb is going out on + + struct sk_buff * tx_skb; // skb being TXed + unsigned int tx_bytes; // bytes remaining to TX within region + void * tx_addr; // addr to send bytes from (for PIO) + struct iovec * tx_iovec; // remaining regions + unsigned int tx_regions; // number of remaining regions + + spinlock_t mem_lock; + wait_queue_head_t tx_queue; + + u8 irq; + long flags; + u8 tx_last; + u8 tx_idle; + + rx_q_entry * rx_q_reset; + rx_q_entry * rx_q_entry; + rx_q_entry * rx_q_wrap; + + struct atm_dev * atm_dev; + + u32 last_vc; + + int noof_spare_buffers; + u16 spare_buffers[SPARE_BUFFER_POOL_SIZE]; + + u16 tx_channel_record[TX_CHANS]; + + // this is what we follow when we get incoming data + u32 txer[MAX_VCS/32]; + struct atm_vcc * rxer[MAX_VCS]; + + // cell rate allocation + spinlock_t rate_lock; + unsigned int rx_avail; + unsigned int tx_avail; + + // dev stats + unsigned long tx_cell_count; + unsigned long rx_cell_count; + unsigned long hec_error_count; + unsigned long unassigned_cell_count; + + struct pci_dev * pci_dev; + struct timer_list housekeeping; +}; + +typedef struct hrz_dev hrz_dev; + +/* macros for use later */ + +#define BUF_PTR(cbptr) ((cbptr) - (cell_buf *) 0) + +#define INTERESTING_INTERRUPTS \ + (RX_DATA_AV | RX_DISABLED | TX_BUS_MASTER_COMPLETE | RX_BUS_MASTER_COMPLETE) + +// 190 cells by default (192 TX buffers - 2 elbow room, see docs) +#define TX_AAL5_LIMIT (190*ATM_CELL_PAYLOAD-ATM_AAL5_TRAILER) // 9112 + +// Have enough RX buffers (unless we allow other buffer splits) +#define RX_AAL5_LIMIT ATM_MAX_AAL5_PDU + +/* multi-statement macro protector */ +#define DW(x) do{ x } while(0) + +#define HRZ_DEV(atm_dev) ((hrz_dev *) (atm_dev)->dev_data) +#define HRZ_VCC(atm_vcc) ((hrz_vcc *) (atm_vcc)->dev_data) + +/* Turn the LEDs on and off */ +// The LEDs bits are upside down in that setting the bit in the debug +// register will turn the appropriate LED off. + +#define YELLOW_LED DEBUG_BIT_0 +#define GREEN_LED DEBUG_BIT_1 +#define YELLOW_LED_OE DEBUG_BIT_0_OE +#define GREEN_LED_OE DEBUG_BIT_1_OE + +#define GREEN_LED_OFF(dev) \ + wr_regl (dev, CONTROL_0_REG, rd_regl (dev, CONTROL_0_REG) | GREEN_LED) +#define GREEN_LED_ON(dev) \ + wr_regl (dev, CONTROL_0_REG, rd_regl (dev, CONTROL_0_REG) &~ GREEN_LED) +#define YELLOW_LED_OFF(dev) \ + wr_regl (dev, CONTROL_0_REG, rd_regl (dev, CONTROL_0_REG) | YELLOW_LED) +#define YELLOW_LED_ON(dev) \ + wr_regl (dev, CONTROL_0_REG, rd_regl (dev, CONTROL_0_REG) &~ YELLOW_LED) + +typedef enum { + round_up, + round_down, + round_nearest +} rounding; + +#endif /* DRIVER_ATM_HORIZON_H */ |