Merge tag 'hwmon-for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
 "core:
   - Add support for enable attributes to hwmon core
   - Add intrusion templates

  pmbus:
   - Support for Infineon Multi-phase xdpe122 family controllers
   - Support for Intel IMVP9 and AMD 6.25mV modes
   - Support for vid mode detection per page bases
   - Detect if chip is write protected
   - Support for MAX20730, MAX20734, MAX20743, MAX20796, UCD90320,
     TPS53688
   - Various improvements to ibm-cffps driver

  k10temp:
   - Support for additional temperature sensors as well as voltage and
     current telemetry for Zen CPUs

  w83627ehf:
   - Remove support for NCT6775, NCT6776 (they have their own driver)

  New drivers:
   - ADM1177
   - MAX31730
   - Driver for disk and solid state drives with temperature sensors

  Other:
   - pwm-fan: stop fan on shutdown"

* tag 'hwmon-for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (35 commits)
  hwmon: (k10temp) Display up to eight sets of CCD temperatures
  hwmon: (k10temp) Add debugfs support
  hwmon: (k10temp) Don't show temperature limits on Ryzen (Zen) CPUs
  hwmon: (k10temp) Show core and SoC current and voltages on Ryzen CPUs
  hwmon: (k10temp) Report temperatures per CPU die
  hmon: (k10temp) Convert to use devm_hwmon_device_register_with_info
  hwmon: (k10temp) Use bitops
  hwmon: (pwm-fan) stop fan on shutdown
  MAINTAINERS: add entry for ADM1177 driver
  dt-binding: hwmon: Add documentation for ADM1177
  hwmon: (adm1177) Add ADM1177 Hot Swap Controller and Digital Power Monitor driver
  docs: hwmon: Include 'xdpe12284.rst' into docs
  hwmon: (pmbus) Add support for Infineon Multi-phase xdpe122 family controllers
  hwmon: (pmbus/tps53679) Extend device list supported by driver
  hwmon: (pmbus/core) Add support for Intel IMVP9 and AMD 6.25mV modes
  hwmon: (pmbus/core) Add support for vid mode detection per page bases
  hwmon: (pmbus/ibm-cffps) Prevent writing on_off_config with bad data
  hwmon: (w83627ehf) Remove set but not used variable 'fan4min'
  hwmon: Driver for disk and solid state drives with temperature sensors
  hwmon: (pmbus/ibm-cffps) Fix the LED behavior when turned off
  ...

1 files changed, 15 insertions, 2 deletions

diff --git a/drivers/hwmon/hwmon.c b/drivers/hwmon/hwmon.c
index d018b20089ec..6a30fb453f7a 100644
--- a/drivers/hwmon/hwmon.c
+++ b/drivers/hwmon/hwmon.c
@@ -188,7 +188,7 @@ static int hwmon_thermal_add_sensor(struct device *dev, int index)
 
 static int hwmon_attr_base(enum hwmon_sensor_types type)
 {
-	if (type == hwmon_in)
+	if (type == hwmon_in || type == hwmon_intrusion)
 		return 0;
 	return 1;
 }
@@ -343,6 +343,7 @@ static const char * const hwmon_chip_attrs[] = {
 };
 
 static const char * const hwmon_temp_attr_templates[] = {
+	[hwmon_temp_enable] = "temp%d_enable",
 	[hwmon_temp_input] = "temp%d_input",
 	[hwmon_temp_type] = "temp%d_type",
 	[hwmon_temp_lcrit] = "temp%d_lcrit",
@@ -370,6 +371,7 @@ static const char * const hwmon_temp_attr_templates[] = {
 };
 
 static const char * const hwmon_in_attr_templates[] = {
+	[hwmon_in_enable] = "in%d_enable",
 	[hwmon_in_input] = "in%d_input",
 	[hwmon_in_min] = "in%d_min",
 	[hwmon_in_max] = "in%d_max",
@@ -385,10 +387,10 @@ static const char * const hwmon_in_attr_templates[] = {
 	[hwmon_in_max_alarm] = "in%d_max_alarm",
 	[hwmon_in_lcrit_alarm] = "in%d_lcrit_alarm",
 	[hwmon_in_crit_alarm] = "in%d_crit_alarm",
-	[hwmon_in_enable] = "in%d_enable",
 };
 
 static const char * const hwmon_curr_attr_templates[] = {
+	[hwmon_curr_enable] = "curr%d_enable",
 	[hwmon_curr_input] = "curr%d_input",
 	[hwmon_curr_min] = "curr%d_min",
 	[hwmon_curr_max] = "curr%d_max",
@@ -407,6 +409,7 @@ static const char * const hwmon_curr_attr_templates[] = {
 };
 
 static const char * const hwmon_power_attr_templates[] = {
+	[hwmon_power_enable] = "power%d_enable",
 	[hwmon_power_average] = "power%d_average",
 	[hwmon_power_average_interval] = "power%d_average_interval",
 	[hwmon_power_average_interval_max] = "power%d_interval_max",
@@ -438,11 +441,13 @@ static const char * const hwmon_power_attr_templates[] = {
 };
 
 static const char * const hwmon_energy_attr_templates[] = {
+	[hwmon_energy_enable] = "energy%d_enable",
 	[hwmon_energy_input] = "energy%d_input",
 	[hwmon_energy_label] = "energy%d_label",
 };
 
 static const char * const hwmon_humidity_attr_templates[] = {
+	[hwmon_humidity_enable] = "humidity%d_enable",
 	[hwmon_humidity_input] = "humidity%d_input",
 	[hwmon_humidity_label] = "humidity%d_label",
 	[hwmon_humidity_min] = "humidity%d_min",
@@ -454,6 +459,7 @@ static const char * const hwmon_humidity_attr_templates[] = {
 };
 
 static const char * const hwmon_fan_attr_templates[] = {
+	[hwmon_fan_enable] = "fan%d_enable",
 	[hwmon_fan_input] = "fan%d_input",
 	[hwmon_fan_label] = "fan%d_label",
 	[hwmon_fan_min] = "fan%d_min",
@@ -474,6 +480,11 @@ static const char * const hwmon_pwm_attr_templates[] = {
 	[hwmon_pwm_freq] = "pwm%d_freq",
 };
 
+static const char * const hwmon_intrusion_attr_templates[] = {
+	[hwmon_intrusion_alarm] = "intrusion%d_alarm",
+	[hwmon_intrusion_beep]  = "intrusion%d_beep",
+};
+
 static const char * const *__templates[] = {
 	[hwmon_chip] = hwmon_chip_attrs,
 	[hwmon_temp] = hwmon_temp_attr_templates,
@@ -484,6 +495,7 @@ static const char * const *__templates[] = {
 	[hwmon_humidity] = hwmon_humidity_attr_templates,
 	[hwmon_fan] = hwmon_fan_attr_templates,
 	[hwmon_pwm] = hwmon_pwm_attr_templates,
+	[hwmon_intrusion] = hwmon_intrusion_attr_templates,
 };
 
 static const int __templates_size[] = {
@@ -496,6 +508,7 @@ static const int __templates_size[] = {
 	[hwmon_humidity] = ARRAY_SIZE(hwmon_humidity_attr_templates),
 	[hwmon_fan] = ARRAY_SIZE(hwmon_fan_attr_templates),
 	[hwmon_pwm] = ARRAY_SIZE(hwmon_pwm_attr_templates),
+	[hwmon_intrusion] = ARRAY_SIZE(hwmon_intrusion_attr_templates),
 };
 
 static int hwmon_num_channel_attrs(const struct hwmon_channel_info *info)