diff options
author | Sean Young <sean@mess.org> | 2021-10-13 15:27:57 +0300 |
---|---|---|
committer | Mauro Carvalho Chehab <mchehab+huawei@kernel.org> | 2021-10-19 10:08:39 +0300 |
commit | 95f4325de9e612918468f7e6bda633223bae793f (patch) | |
tree | 69470b3682b43302864fc7d105902f1b57e4a37d /drivers/media/rc | |
parent | febfe985fc2ea052a363f6525ff624b8efd5273c (diff) |
media: sir_ir: remove broken driver
This driver is a port of the lirc_sir driver to rc-core. However, for
this driver I could not find any hardware to test, so it was done without
testing. This is a mistake.
There are clear bugs in the code. For example the two arguments
to ktime_us_delta() are reversed, which means the result is garbage.
The driver has been in the kernel for four years, and noone has ever
reported an issue. So, remove this driver.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Diffstat (limited to 'drivers/media/rc')
-rw-r--r-- | drivers/media/rc/Kconfig | 8 | ||||
-rw-r--r-- | drivers/media/rc/Makefile | 1 | ||||
-rw-r--r-- | drivers/media/rc/sir_ir.c | 438 |
3 files changed, 0 insertions, 447 deletions
diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig index fd5a7a058714..9506baf3c4c1 100644 --- a/drivers/media/rc/Kconfig +++ b/drivers/media/rc/Kconfig @@ -453,14 +453,6 @@ config IR_SERIAL_TRANSMITTER help Serial Port Transmitter support -config IR_SIR - tristate "Built-in SIR IrDA port" - help - Say Y if you want to use a IrDA SIR port Transceivers. - - To compile this driver as a module, choose M here: the module will - be called sir-ir. - config RC_XBOX_DVD tristate "Xbox DVD Movie Playback Kit" depends on USB diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile index 0db51fad27d6..378d62d21e06 100644 --- a/drivers/media/rc/Makefile +++ b/drivers/media/rc/Makefile @@ -47,7 +47,6 @@ obj-$(CONFIG_RC_ST) += st_rc.o obj-$(CONFIG_IR_SUNXI) += sunxi-cir.o obj-$(CONFIG_IR_IMG) += img-ir/ obj-$(CONFIG_IR_SERIAL) += serial_ir.o -obj-$(CONFIG_IR_SIR) += sir_ir.o obj-$(CONFIG_IR_MTK) += mtk-cir.o obj-$(CONFIG_RC_XBOX_DVD) += xbox_remote.o obj-$(CONFIG_IR_TOY) += ir_toy.o diff --git a/drivers/media/rc/sir_ir.c b/drivers/media/rc/sir_ir.c deleted file mode 100644 index 6ec96dc34586..000000000000 --- a/drivers/media/rc/sir_ir.c +++ /dev/null @@ -1,438 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * IR SIR driver, (C) 2000 Milan Pikula <www@fornax.sk> - * - * sir_ir - Device driver for use with SIR (serial infra red) - * mode of IrDA on many notebooks. - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/kernel.h> -#include <linux/serial_reg.h> -#include <linux/ktime.h> -#include <linux/delay.h> -#include <linux/platform_device.h> - -#include <media/rc-core.h> - -/* SECTION: Definitions */ -#define PULSE '[' - -/* 9bit * 1s/115200bit in milli seconds = 78.125ms*/ -#define TIME_CONST (9000000ul / 115200ul) - -/* timeout for sequences in jiffies (=5/100s), must be longer than TIME_CONST */ -#define SIR_TIMEOUT (HZ * 5 / 100) - -/* onboard sir ports are typically com3 */ -static int io = 0x3e8; -static int irq = 4; -static int threshold = 3; - -static DEFINE_SPINLOCK(timer_lock); -static struct timer_list timerlist; -/* time of last signal change detected */ -static ktime_t last; -/* time of last UART data ready interrupt */ -static ktime_t last_intr_time; -static int last_value; -static struct rc_dev *rcdev; - -static struct platform_device *sir_ir_dev; - -static DEFINE_SPINLOCK(hardware_lock); - -/* SECTION: Prototypes */ - -/* Communication with user-space */ -static void add_read_queue(int flag, unsigned long val); -/* Hardware */ -static irqreturn_t sir_interrupt(int irq, void *dev_id); -static void send_space(unsigned long len); -static void send_pulse(unsigned long len); -static int init_hardware(void); -static void drop_hardware(void); -/* Initialisation */ - -static inline unsigned int sinp(int offset) -{ - return inb(io + offset); -} - -static inline void soutp(int offset, int value) -{ - outb(value, io + offset); -} - -/* SECTION: Communication with user-space */ -static int sir_tx_ir(struct rc_dev *dev, unsigned int *tx_buf, - unsigned int count) -{ - unsigned long flags; - int i; - - local_irq_save(flags); - for (i = 0; i < count;) { - if (tx_buf[i]) - send_pulse(tx_buf[i]); - i++; - if (i >= count) - break; - if (tx_buf[i]) - send_space(tx_buf[i]); - i++; - } - local_irq_restore(flags); - - return count; -} - -static void add_read_queue(int flag, unsigned long val) -{ - struct ir_raw_event ev = {}; - - pr_debug("add flag %d with val %lu\n", flag, val); - - /* - * statistically, pulses are ~TIME_CONST/2 too long. we could - * maybe make this more exact, but this is good enough - */ - if (flag) { - /* pulse */ - if (val > TIME_CONST / 2) - val -= TIME_CONST / 2; - else /* should not ever happen */ - val = 1; - ev.pulse = true; - } else { - val += TIME_CONST / 2; - } - ev.duration = val; - - ir_raw_event_store_with_filter(rcdev, &ev); -} - -/* SECTION: Hardware */ -static void sir_timeout(struct timer_list *unused) -{ - /* - * if last received signal was a pulse, but receiving stopped - * within the 9 bit frame, we need to finish this pulse and - * simulate a signal change to from pulse to space. Otherwise - * upper layers will receive two sequences next time. - */ - - unsigned long flags; - unsigned long pulse_end; - - /* avoid interference with interrupt */ - spin_lock_irqsave(&timer_lock, flags); - if (last_value) { - /* clear unread bits in UART and restart */ - outb(UART_FCR_CLEAR_RCVR, io + UART_FCR); - /* determine 'virtual' pulse end: */ - pulse_end = min_t(unsigned long, - ktime_us_delta(last, last_intr_time), - IR_MAX_DURATION); - dev_dbg(&sir_ir_dev->dev, "timeout add %d for %lu usec\n", - last_value, pulse_end); - add_read_queue(last_value, pulse_end); - last_value = 0; - last = last_intr_time; - } - spin_unlock_irqrestore(&timer_lock, flags); - ir_raw_event_handle(rcdev); -} - -static irqreturn_t sir_interrupt(int irq, void *dev_id) -{ - unsigned char data; - ktime_t curr_time; - unsigned long delt; - unsigned long deltintr; - unsigned long flags; - int counter = 0; - int iir, lsr; - - while ((iir = inb(io + UART_IIR) & UART_IIR_ID)) { - if (++counter > 256) { - dev_err(&sir_ir_dev->dev, "Trapped in interrupt"); - break; - } - - switch (iir & UART_IIR_ID) { /* FIXME toto treba preriedit */ - case UART_IIR_MSI: - (void)inb(io + UART_MSR); - break; - case UART_IIR_RLSI: - case UART_IIR_THRI: - (void)inb(io + UART_LSR); - break; - case UART_IIR_RDI: - /* avoid interference with timer */ - spin_lock_irqsave(&timer_lock, flags); - do { - del_timer(&timerlist); - data = inb(io + UART_RX); - curr_time = ktime_get(); - delt = min_t(unsigned long, - ktime_us_delta(last, curr_time), - IR_MAX_DURATION); - deltintr = min_t(unsigned long, - ktime_us_delta(last_intr_time, - curr_time), - IR_MAX_DURATION); - dev_dbg(&sir_ir_dev->dev, "t %lu, d %d\n", - deltintr, (int)data); - /* - * if nothing came in last X cycles, - * it was gap - */ - if (deltintr > TIME_CONST * threshold) { - if (last_value) { - dev_dbg(&sir_ir_dev->dev, "GAP\n"); - /* simulate signal change */ - add_read_queue(last_value, - delt - - deltintr); - last_value = 0; - last = last_intr_time; - delt = deltintr; - } - } - data = 1; - if (data ^ last_value) { - /* - * deltintr > 2*TIME_CONST, remember? - * the other case is timeout - */ - add_read_queue(last_value, - delt - TIME_CONST); - last_value = data; - last = curr_time; - last = ktime_sub_us(last, - TIME_CONST); - } - last_intr_time = curr_time; - if (data) { - /* - * start timer for end of - * sequence detection - */ - timerlist.expires = jiffies + - SIR_TIMEOUT; - add_timer(&timerlist); - } - - lsr = inb(io + UART_LSR); - } while (lsr & UART_LSR_DR); /* data ready */ - spin_unlock_irqrestore(&timer_lock, flags); - break; - default: - break; - } - } - ir_raw_event_handle(rcdev); - return IRQ_RETVAL(IRQ_HANDLED); -} - -static void send_space(unsigned long len) -{ - usleep_range(len, len + 25); -} - -static void send_pulse(unsigned long len) -{ - long bytes_out = len / TIME_CONST; - - if (bytes_out == 0) - bytes_out++; - - while (bytes_out--) { - outb(PULSE, io + UART_TX); - /* FIXME treba seriozne cakanie z char/serial.c */ - while (!(inb(io + UART_LSR) & UART_LSR_THRE)) - ; - } -} - -static int init_hardware(void) -{ - u8 scratch, scratch2, scratch3; - unsigned long flags; - - spin_lock_irqsave(&hardware_lock, flags); - - /* - * This is a simple port existence test, borrowed from the autoconfig - * function in drivers/tty/serial/8250/8250_port.c - */ - scratch = sinp(UART_IER); - soutp(UART_IER, 0); -#ifdef __i386__ - outb(0xff, 0x080); -#endif - scratch2 = sinp(UART_IER) & 0x0f; - soutp(UART_IER, 0x0f); -#ifdef __i386__ - outb(0x00, 0x080); -#endif - scratch3 = sinp(UART_IER) & 0x0f; - soutp(UART_IER, scratch); - if (scratch2 != 0 || scratch3 != 0x0f) { - /* we fail, there's nothing here */ - spin_unlock_irqrestore(&hardware_lock, flags); - pr_err("port existence test failed, cannot continue\n"); - return -ENODEV; - } - - /* reset UART */ - outb(0, io + UART_MCR); - outb(0, io + UART_IER); - /* init UART */ - /* set DLAB, speed = 115200 */ - outb(UART_LCR_DLAB | UART_LCR_WLEN7, io + UART_LCR); - outb(1, io + UART_DLL); outb(0, io + UART_DLM); - /* 7N1+start = 9 bits at 115200 ~ 3 bits at 44000 */ - outb(UART_LCR_WLEN7, io + UART_LCR); - /* FIFO operation */ - outb(UART_FCR_ENABLE_FIFO, io + UART_FCR); - /* interrupts */ - /* outb(UART_IER_RLSI|UART_IER_RDI|UART_IER_THRI, io + UART_IER); */ - outb(UART_IER_RDI, io + UART_IER); - /* turn on UART */ - outb(UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2, io + UART_MCR); - spin_unlock_irqrestore(&hardware_lock, flags); - - return 0; -} - -static void drop_hardware(void) -{ - unsigned long flags; - - spin_lock_irqsave(&hardware_lock, flags); - - /* turn off interrupts */ - outb(0, io + UART_IER); - - spin_unlock_irqrestore(&hardware_lock, flags); -} - -/* SECTION: Initialisation */ -static int sir_ir_probe(struct platform_device *dev) -{ - int retval; - - rcdev = devm_rc_allocate_device(&sir_ir_dev->dev, RC_DRIVER_IR_RAW); - if (!rcdev) - return -ENOMEM; - - rcdev->device_name = "SIR IrDA port"; - rcdev->input_phys = KBUILD_MODNAME "/input0"; - rcdev->input_id.bustype = BUS_HOST; - rcdev->input_id.vendor = 0x0001; - rcdev->input_id.product = 0x0001; - rcdev->input_id.version = 0x0100; - rcdev->tx_ir = sir_tx_ir; - rcdev->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER; - rcdev->driver_name = KBUILD_MODNAME; - rcdev->map_name = RC_MAP_RC6_MCE; - rcdev->timeout = IR_DEFAULT_TIMEOUT; - rcdev->dev.parent = &sir_ir_dev->dev; - - timer_setup(&timerlist, sir_timeout, 0); - - /* get I/O port access and IRQ line */ - if (!devm_request_region(&sir_ir_dev->dev, io, 8, KBUILD_MODNAME)) { - pr_err("i/o port 0x%.4x already in use.\n", io); - return -EBUSY; - } - retval = devm_request_irq(&sir_ir_dev->dev, irq, sir_interrupt, 0, - KBUILD_MODNAME, NULL); - if (retval < 0) { - pr_err("IRQ %d already in use.\n", irq); - return retval; - } - - retval = init_hardware(); - if (retval) { - del_timer_sync(&timerlist); - return retval; - } - - pr_info("I/O port 0x%.4x, IRQ %d.\n", io, irq); - - retval = devm_rc_register_device(&sir_ir_dev->dev, rcdev); - if (retval < 0) - return retval; - - return 0; -} - -static int sir_ir_remove(struct platform_device *dev) -{ - drop_hardware(); - del_timer_sync(&timerlist); - return 0; -} - -static struct platform_driver sir_ir_driver = { - .probe = sir_ir_probe, - .remove = sir_ir_remove, - .driver = { - .name = "sir_ir", - }, -}; - -static int __init sir_ir_init(void) -{ - int retval; - - retval = platform_driver_register(&sir_ir_driver); - if (retval) - return retval; - - sir_ir_dev = platform_device_alloc("sir_ir", 0); - if (!sir_ir_dev) { - retval = -ENOMEM; - goto pdev_alloc_fail; - } - - retval = platform_device_add(sir_ir_dev); - if (retval) - goto pdev_add_fail; - - return 0; - -pdev_add_fail: - platform_device_put(sir_ir_dev); -pdev_alloc_fail: - platform_driver_unregister(&sir_ir_driver); - return retval; -} - -static void __exit sir_ir_exit(void) -{ - platform_device_unregister(sir_ir_dev); - platform_driver_unregister(&sir_ir_driver); -} - -module_init(sir_ir_init); -module_exit(sir_ir_exit); - -MODULE_DESCRIPTION("Infrared receiver driver for SIR type serial ports"); -MODULE_AUTHOR("Milan Pikula"); -MODULE_LICENSE("GPL"); - -module_param_hw(io, int, ioport, 0444); -MODULE_PARM_DESC(io, "I/O address base (0x3f8 or 0x2f8)"); - -module_param_hw(irq, int, irq, 0444); -MODULE_PARM_DESC(irq, "Interrupt (4 or 3)"); - -module_param(threshold, int, 0444); -MODULE_PARM_DESC(threshold, "space detection threshold (3)"); |