Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights:

   1) Steady transitioning of the BPF instructure to a generic spot so
      all kernel subsystems can make use of it, from Alexei Starovoitov.

   2) SFC driver supports busy polling, from Alexandre Rames.

   3) Take advantage of hash table in UDP multicast delivery, from David
      Held.

   4) Lighten locking, in particular by getting rid of the LRU lists, in
      inet frag handling.  From Florian Westphal.

   5) Add support for various RFC6458 control messages in SCTP, from
      Geir Ola Vaagland.

   6) Allow to filter bridge forwarding database dumps by device, from
      Jamal Hadi Salim.

   7) virtio-net also now supports busy polling, from Jason Wang.

   8) Some low level optimization tweaks in pktgen from Jesper Dangaard
      Brouer.

   9) Add support for ipv6 address generation modes, so that userland
      can have some input into the process.  From Jiri Pirko.

  10) Consolidate common TCP connection request code in ipv4 and ipv6,
      from Octavian Purdila.

  11) New ARP packet logger in netfilter, from Pablo Neira Ayuso.

  12) Generic resizable RCU hash table, with intial users in netlink and
      nftables.  From Thomas Graf.

  13) Maintain a name assignment type so that userspace can see where a
      network device name came from (enumerated by kernel, assigned
      explicitly by userspace, etc.) From Tom Gundersen.

  14) Automatic flow label generation on transmit in ipv6, from Tom
      Herbert.

  15) New packet timestamping facilities from Willem de Bruijn, meant to
      assist in measuring latencies going into/out-of the packet
      scheduler, latency from TCP data transmission to ACK, etc"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1536 commits)
  cxgb4 : Disable recursive mailbox commands when enabling vi
  net: reduce USB network driver config options.
  tg3: Modify tg3_tso_bug() to handle multiple TX rings
  amd-xgbe: Perform phy connect/disconnect at dev open/stop
  amd-xgbe: Use dma_set_mask_and_coherent to set DMA mask
  net: sun4i-emac: fix memory leak on bad packet
  sctp: fix possible seqlock seadlock in sctp_packet_transmit()
  Revert "net: phy: Set the driver when registering an MDIO bus device"
  cxgb4vf: Turn off SGE RX/TX Callback Timers and interrupts in PCI shutdown routine
  team: Simplify return path of team_newlink
  bridge: Update outdated comment on promiscuous mode
  net-timestamp: ACK timestamp for bytestreams
  net-timestamp: TCP timestamping
  net-timestamp: SCHED timestamp on entering packet scheduler
  net-timestamp: add key to disambiguate concurrent datagrams
  net-timestamp: move timestamp flags out of sk_flags
  net-timestamp: extend SCM_TIMESTAMPING ancillary data struct
  cxgb4i : Move stray CPL definitions to cxgb4 driver
  tcp: reduce spurious retransmits due to transient SACK reneging
  qlcnic: Initialize dcbnl_ops before register_netdev
  ...

9 files changed, 77 insertions, 20 deletions

diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c
index 218481e509f9..dc79ed85030b 100644
--- a/drivers/net/ethernet/intel/e1000e/82571.c
+++ b/drivers/net/ethernet/intel/e1000e/82571.c
@@ -95,7 +95,6 @@ static s32 e1000_init_phy_params_82571(struct e1000_hw *hw)
 		break;
 	default:
 		return -E1000_ERR_PHY;
-		break;
 	}
 
 	/* This can only be done after all function pointers are setup. */
@@ -422,7 +421,6 @@ static s32 e1000_get_phy_id_82571(struct e1000_hw *hw)
 		break;
 	case e1000_82573:
 		return e1000e_get_phy_id(hw);
-		break;
 	case e1000_82574:
 	case e1000_82583:
 		ret_val = e1e_rphy(hw, MII_PHYSID1, &phy_id);
@@ -440,7 +438,6 @@ static s32 e1000_get_phy_id_82571(struct e1000_hw *hw)
 		break;
 	default:
 		return -E1000_ERR_PHY;
-		break;
 	}
 
 	return 0;
@@ -1458,7 +1455,6 @@ static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw)
 		break;
 	default:
 		return -E1000_ERR_PHY;
-		break;
 	}
 
 	if (ret_val)
diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h
index d18e89212575..bb7ab3c321d6 100644
--- a/drivers/net/ethernet/intel/e1000e/defines.h
+++ b/drivers/net/ethernet/intel/e1000e/defines.h
@@ -342,6 +342,7 @@
 #define E1000_TIPG_IPGR2_SHIFT  20
 
 #define MAX_JUMBO_FRAME_SIZE    0x3F00
+#define E1000_TX_PTR_GAP		0x1F
 
 /* Extended Configuration Control and Size */
 #define E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP      0x00000020
diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c
index 815e26c6d34b..865ce45f9ec3 100644
--- a/drivers/net/ethernet/intel/e1000e/ethtool.c
+++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
@@ -1521,11 +1521,9 @@ static int e1000_setup_loopback_test(struct e1000_adapter *adapter)
 		switch (hw->mac.type) {
 		case e1000_80003es2lan:
 			return e1000_set_es2lan_mac_loopback(adapter);
-			break;
 		case e1000_82571:
 		case e1000_82572:
 			return e1000_set_82571_fiber_loopback(adapter);
-			break;
 		default:
 			rctl = er32(RCTL);
 			rctl |= E1000_RCTL_LBM_TCVR;
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 8894ab8ed6bd..48b74a549155 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -572,7 +572,6 @@ static s32 e1000_init_phy_params_ich8lan(struct e1000_hw *hw)
 		break;
 	default:
 		return -E1000_ERR_PHY;
-		break;
 	}
 
 	return 0;
@@ -2445,7 +2444,7 @@ s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable)
 			return ret_val;
 		e1e_rphy(hw, PHY_REG(776, 20), &data);
 		data &= ~(0x3FF << 2);
-		data |= (0x1A << 2);
+		data |= (E1000_TX_PTR_GAP << 2);
 		ret_val = e1e_wphy(hw, PHY_REG(776, 20), data);
 		if (ret_val)
 			return ret_val;
@@ -4606,14 +4605,23 @@ void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw)
 
 			/* Disable LPLU if both link partners support 100BaseT
 			 * EEE and 100Full is advertised on both ends of the
-			 * link.
+			 * link, and enable Auto Enable LPI since there will
+			 * be no driver to enable LPI while in Sx.
 			 */
 			if ((eee_advert & I82579_EEE_100_SUPPORTED) &&
 			    (dev_spec->eee_lp_ability &
 			     I82579_EEE_100_SUPPORTED) &&
-			    (hw->phy.autoneg_advertised & ADVERTISE_100_FULL))
+			    (hw->phy.autoneg_advertised & ADVERTISE_100_FULL)) {
 				phy_ctrl &= ~(E1000_PHY_CTRL_D0A_LPLU |
 					      E1000_PHY_CTRL_NOND0A_LPLU);
+
+				/* Set Auto Enable LPI after link up */
+				e1e_rphy_locked(hw,
+						I217_LPI_GPIO_CTRL, &phy_reg);
+				phy_reg |= I217_LPI_GPIO_CTRL_AUTO_EN_LPI;
+				e1e_wphy_locked(hw,
+						I217_LPI_GPIO_CTRL, phy_reg);
+			}
 		}
 
 		/* For i217 Intel Rapid Start Technology support,
@@ -4710,6 +4718,11 @@ void e1000_resume_workarounds_pchlan(struct e1000_hw *hw)
 			return;
 		}
 
+		/* Clear Auto Enable LPI after link up */
+		e1e_rphy_locked(hw, I217_LPI_GPIO_CTRL, &phy_reg);
+		phy_reg &= ~I217_LPI_GPIO_CTRL_AUTO_EN_LPI;
+		e1e_wphy_locked(hw, I217_LPI_GPIO_CTRL, phy_reg);
+
 		if (!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) {
 			/* Restore clear on SMB if no manageability engine
 			 * is present
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.h b/drivers/net/ethernet/intel/e1000e/ich8lan.h
index 5515126c81c1..8066a498eaac 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.h
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.h
@@ -217,6 +217,10 @@
 #define I217_INBAND_CTRL_LINK_STAT_TX_TIMEOUT_MASK	0x3F00
 #define I217_INBAND_CTRL_LINK_STAT_TX_TIMEOUT_SHIFT	8
 
+/* Low Power Idle GPIO Control */
+#define I217_LPI_GPIO_CTRL			PHY_REG(772, 18)
+#define I217_LPI_GPIO_CTRL_AUTO_EN_LPI		0x0800
+
 /* PHY Low Power Idle Control */
 #define I82579_LPI_CTRL				PHY_REG(772, 20)
 #define I82579_LPI_CTRL_100_ENABLE		0x2000
diff --git a/drivers/net/ethernet/intel/e1000e/mac.c b/drivers/net/ethernet/intel/e1000e/mac.c
index 8c386f3a15eb..30b74d590bee 100644
--- a/drivers/net/ethernet/intel/e1000e/mac.c
+++ b/drivers/net/ethernet/intel/e1000e/mac.c
@@ -787,7 +787,6 @@ static s32 e1000_commit_fc_settings_generic(struct e1000_hw *hw)
 	default:
 		e_dbg("Flow control param set incorrectly\n");
 		return -E1000_ERR_CONFIG;
-		break;
 	}
 
 	ew32(TXCW, txcw);
diff --git a/drivers/net/ethernet/intel/e1000e/manage.c b/drivers/net/ethernet/intel/e1000e/manage.c
index cb37ff1f1321..58856032298d 100644
--- a/drivers/net/ethernet/intel/e1000e/manage.c
+++ b/drivers/net/ethernet/intel/e1000e/manage.c
@@ -327,9 +327,12 @@ bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw)
 	} else if ((hw->mac.type == e1000_82574) ||
 		   (hw->mac.type == e1000_82583)) {
 		u16 data;
+		s32 ret_val;
 
 		factps = er32(FACTPS);
-		e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &data);
+		ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &data);
+		if (ret_val)
+			return false;
 
 		if (!(factps & E1000_FACTPS_MNGCG) &&
 		    ((data & E1000_NVM_INIT_CTRL2_MNGM) ==
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 201cc93f3625..65c3aef2bd36 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -6033,6 +6033,28 @@ release:
 	return retval;
 }
 
+static void e1000e_flush_lpic(struct pci_dev *pdev)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	u32 ret_val;
+
+	pm_runtime_get_sync(netdev->dev.parent);
+
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		goto fl_out;
+
+	pr_info("EEE TX LPI TIMER: %08X\n",
+		er32(LPIC) >> E1000_LPIC_LPIET_SHIFT);
+
+	hw->phy.ops.release(hw);
+
+fl_out:
+	pm_runtime_put_sync(netdev->dev.parent);
+}
+
 static int e1000e_pm_freeze(struct device *dev)
 {
 	struct net_device *netdev = pci_get_drvdata(to_pci_dev(dev));
@@ -6333,6 +6355,8 @@ static int e1000e_pm_suspend(struct device *dev)
 {
 	struct pci_dev *pdev = to_pci_dev(dev);
 
+	e1000e_flush_lpic(pdev);
+
 	e1000e_pm_freeze(dev);
 
 	return __e1000_shutdown(pdev, false);
@@ -6357,9 +6381,14 @@ static int e1000e_pm_runtime_idle(struct device *dev)
 	struct pci_dev *pdev = to_pci_dev(dev);
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct e1000_adapter *adapter = netdev_priv(netdev);
+	u16 eee_lp;
 
-	if (!e1000e_has_link(adapter))
+	eee_lp = adapter->hw.dev_spec.ich8lan.eee_lp_ability;
+
+	if (!e1000e_has_link(adapter)) {
+		adapter->hw.dev_spec.ich8lan.eee_lp_ability = eee_lp;
 		pm_schedule_suspend(dev, 5 * MSEC_PER_SEC);
+	}
 
 	return -EBUSY;
 }
@@ -6411,6 +6440,8 @@ static int e1000e_pm_runtime_suspend(struct device *dev)
 
 static void e1000_shutdown(struct pci_dev *pdev)
 {
+	e1000e_flush_lpic(pdev);
+
 	e1000e_pm_freeze(&pdev->dev);
 
 	__e1000_shutdown(pdev, false);
@@ -6708,6 +6739,7 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	int bars, i, err, pci_using_dac;
 	u16 eeprom_data = 0;
 	u16 eeprom_apme_mask = E1000_EEPROM_APME;
+	s32 rval = 0;
 
 	if (ei->flags2 & FLAG2_DISABLE_ASPM_L0S)
 		aspm_disable_flag = PCIE_LINK_STATE_L0S;
@@ -6940,15 +6972,19 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	} else if (adapter->flags & FLAG_APME_IN_CTRL3) {
 		if (adapter->flags & FLAG_APME_CHECK_PORT_B &&
 		    (adapter->hw.bus.func == 1))
-			e1000_read_nvm(&adapter->hw, NVM_INIT_CONTROL3_PORT_B,
-				       1, &eeprom_data);
+			rval = e1000_read_nvm(&adapter->hw,
+					      NVM_INIT_CONTROL3_PORT_B,
+					      1, &eeprom_data);
 		else
-			e1000_read_nvm(&adapter->hw, NVM_INIT_CONTROL3_PORT_A,
-				       1, &eeprom_data);
+			rval = e1000_read_nvm(&adapter->hw,
+					      NVM_INIT_CONTROL3_PORT_A,
+					      1, &eeprom_data);
 	}
 
 	/* fetch WoL from EEPROM */
-	if (eeprom_data & eeprom_apme_mask)
+	if (rval)
+		e_dbg("NVM read error getting WoL initial values: %d\n", rval);
+	else if (eeprom_data & eeprom_apme_mask)
 		adapter->eeprom_wol |= E1000_WUFC_MAG;
 
 	/* now that we have the eeprom settings, apply the special cases
@@ -6967,7 +7003,12 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		device_wakeup_enable(&pdev->dev);
 
 	/* save off EEPROM version number */
-	e1000_read_nvm(&adapter->hw, 5, 1, &adapter->eeprom_vers);
+	rval = e1000_read_nvm(&adapter->hw, 5, 1, &adapter->eeprom_vers);
+
+	if (rval) {
+		e_dbg("NVM read error getting EEPROM version: %d\n", rval);
+		adapter->eeprom_vers = 0;
+	}
 
 	/* reset the hardware with the new settings */
 	e1000e_reset(adapter);
diff --git a/drivers/net/ethernet/intel/e1000e/nvm.c b/drivers/net/ethernet/intel/e1000e/nvm.c
index b1f212b7baf7..fa6b1036a327 100644
--- a/drivers/net/ethernet/intel/e1000e/nvm.c
+++ b/drivers/net/ethernet/intel/e1000e/nvm.c
@@ -327,8 +327,10 @@ s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
 
 		ew32(EERD, eerd);
 		ret_val = e1000e_poll_eerd_eewr_done(hw, E1000_NVM_POLL_READ);
-		if (ret_val)
+		if (ret_val) {
+			e_dbg("NVM read error: %d\n", ret_val);
 			break;
+		}
 
 		data[i] = (er32(EERD) >> E1000_NVM_RW_REG_DATA);
 	}