Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights:

   1) Steady transitioning of the BPF instructure to a generic spot so
      all kernel subsystems can make use of it, from Alexei Starovoitov.

   2) SFC driver supports busy polling, from Alexandre Rames.

   3) Take advantage of hash table in UDP multicast delivery, from David
      Held.

   4) Lighten locking, in particular by getting rid of the LRU lists, in
      inet frag handling.  From Florian Westphal.

   5) Add support for various RFC6458 control messages in SCTP, from
      Geir Ola Vaagland.

   6) Allow to filter bridge forwarding database dumps by device, from
      Jamal Hadi Salim.

   7) virtio-net also now supports busy polling, from Jason Wang.

   8) Some low level optimization tweaks in pktgen from Jesper Dangaard
      Brouer.

   9) Add support for ipv6 address generation modes, so that userland
      can have some input into the process.  From Jiri Pirko.

  10) Consolidate common TCP connection request code in ipv4 and ipv6,
      from Octavian Purdila.

  11) New ARP packet logger in netfilter, from Pablo Neira Ayuso.

  12) Generic resizable RCU hash table, with intial users in netlink and
      nftables.  From Thomas Graf.

  13) Maintain a name assignment type so that userspace can see where a
      network device name came from (enumerated by kernel, assigned
      explicitly by userspace, etc.) From Tom Gundersen.

  14) Automatic flow label generation on transmit in ipv6, from Tom
      Herbert.

  15) New packet timestamping facilities from Willem de Bruijn, meant to
      assist in measuring latencies going into/out-of the packet
      scheduler, latency from TCP data transmission to ACK, etc"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1536 commits)
  cxgb4 : Disable recursive mailbox commands when enabling vi
  net: reduce USB network driver config options.
  tg3: Modify tg3_tso_bug() to handle multiple TX rings
  amd-xgbe: Perform phy connect/disconnect at dev open/stop
  amd-xgbe: Use dma_set_mask_and_coherent to set DMA mask
  net: sun4i-emac: fix memory leak on bad packet
  sctp: fix possible seqlock seadlock in sctp_packet_transmit()
  Revert "net: phy: Set the driver when registering an MDIO bus device"
  cxgb4vf: Turn off SGE RX/TX Callback Timers and interrupts in PCI shutdown routine
  team: Simplify return path of team_newlink
  bridge: Update outdated comment on promiscuous mode
  net-timestamp: ACK timestamp for bytestreams
  net-timestamp: TCP timestamping
  net-timestamp: SCHED timestamp on entering packet scheduler
  net-timestamp: add key to disambiguate concurrent datagrams
  net-timestamp: move timestamp flags out of sk_flags
  net-timestamp: extend SCM_TIMESTAMPING ancillary data struct
  cxgb4i : Move stray CPL definitions to cxgb4 driver
  tcp: reduce spurious retransmits due to transient SACK reneging
  qlcnic: Initialize dcbnl_ops before register_netdev
  ...

1 files changed, 16 insertions, 14 deletions

diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
index 6cc5f52b807f..d6073f67b212 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h
@@ -69,10 +69,8 @@
  * @TX_CMD_FLG_ACK: expect ACK from receiving station
  * @TX_CMD_FLG_STA_RATE: use RS table with initial index from the TX command.
  *	Otherwise, use rate_n_flags from the TX command
- * @TX_CMD_FLG_BA: this frame is a block ack
  * @TX_CMD_FLG_BAR: this frame is a BA request, immediate BAR is expected
  *	Must set TX_CMD_FLG_ACK with this flag.
- * @TX_CMD_FLG_TXOP_PROT: protect frame with full TXOP protection
  * @TX_CMD_FLG_VHT_NDPA: mark frame is NDPA for VHT beamformer sequence
  * @TX_CMD_FLG_HT_NDPA: mark frame is NDPA for HT beamformer sequence
  * @TX_CMD_FLG_CSI_FDBK2HOST: mark to send feedback to host (only if good CRC)
@@ -82,12 +80,10 @@
  * @TX_CMD_FLG_SEQ_CTL: set if FW should override the sequence control.
  *	Should be set for mgmt, non-QOS data, mcast, bcast and in scan command
  * @TX_CMD_FLG_MORE_FRAG: this frame is non-last MPDU
- * @TX_CMD_FLG_NEXT_FRAME: this frame includes information of the next frame
  * @TX_CMD_FLG_TSF: FW should calculate and insert TSF in the frame
  *	Should be set for beacons and probe responses
  * @TX_CMD_FLG_CALIB: activate PA TX power calibrations
  * @TX_CMD_FLG_KEEP_SEQ_CTL: if seq_ctl is set, don't increase inner seq count
- * @TX_CMD_FLG_AGG_START: allow this frame to start aggregation
  * @TX_CMD_FLG_MH_PAD: driver inserted 2 byte padding after MAC header.
  *	Should be set for 26/30 length MAC headers
  * @TX_CMD_FLG_RESP_TO_DRV: zero this if the response should go only to FW
@@ -103,7 +99,6 @@ enum iwl_tx_flags {
 	TX_CMD_FLG_PROT_REQUIRE		= BIT(0),
 	TX_CMD_FLG_ACK			= BIT(3),
 	TX_CMD_FLG_STA_RATE		= BIT(4),
-	TX_CMD_FLG_BA			= BIT(5),
 	TX_CMD_FLG_BAR			= BIT(6),
 	TX_CMD_FLG_TXOP_PROT		= BIT(7),
 	TX_CMD_FLG_VHT_NDPA		= BIT(8),
@@ -113,11 +108,9 @@ enum iwl_tx_flags {
 	TX_CMD_FLG_BT_DIS		= BIT(12),
 	TX_CMD_FLG_SEQ_CTL		= BIT(13),
 	TX_CMD_FLG_MORE_FRAG		= BIT(14),
-	TX_CMD_FLG_NEXT_FRAME		= BIT(15),
 	TX_CMD_FLG_TSF			= BIT(16),
 	TX_CMD_FLG_CALIB		= BIT(17),
 	TX_CMD_FLG_KEEP_SEQ_CTL		= BIT(18),
-	TX_CMD_FLG_AGG_START		= BIT(19),
 	TX_CMD_FLG_MH_PAD		= BIT(20),
 	TX_CMD_FLG_RESP_TO_DRV		= BIT(21),
 	TX_CMD_FLG_CCMP_AGG		= BIT(22),
@@ -191,8 +184,6 @@ enum iwl_tx_flags {
  * struct iwl_tx_cmd - TX command struct to FW
  * ( TX_CMD = 0x1c )
  * @len: in bytes of the payload, see below for details
- * @next_frame_len: same as len, but for next frame (0 if not applicable)
- *	Used for fragmentation and bursting, but not in 11n aggregation.
  * @tx_flags: combination of TX_CMD_FLG_*
  * @rate_n_flags: rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is
  *	cleared. Combination of RATE_MCS_*
@@ -210,8 +201,6 @@ enum iwl_tx_flags {
  * @data_retry_limit: max attempts to send the data packet
  * @tid_spec: TID/tspec
  * @pm_frame_timeout: PM TX frame timeout
- * @driver_txop: duration od EDCA TXOP, in 32-usec units. Set this if not
- *	specified by HCCA protocol
  *
  * The byte count (both len and next_frame_len) includes MAC header
  * (24/26/30/32 bytes)
@@ -241,8 +230,7 @@ struct iwl_tx_cmd {
 	u8 initial_rate_index;
 	u8 reserved2;
 	u8 key[16];
-	__le16 next_frame_flags;
-	__le16 reserved3;
+	__le32 reserved3;
 	__le32 life_time;
 	__le32 dram_lsb_ptr;
 	u8 dram_msb_ptr;
@@ -250,7 +238,7 @@ struct iwl_tx_cmd {
 	u8 data_retry_limit;
 	u8 tid_tspec;
 	__le16 pm_frame_timeout;
-	__le16 driver_txop;
+	__le16 reserved4;
 	u8 payload[0];
 	struct ieee80211_hdr hdr[0];
 } __packed; /* TX_CMD_API_S_VER_3 */
@@ -549,6 +537,20 @@ struct iwl_beacon_notif {
 } __packed;
 
 /**
+ * struct iwl_extended_beacon_notif - notifies about beacon transmission
+ * @beacon_notify_hdr: tx response command associated with the beacon
+ * @tsf: last beacon tsf
+ * @ibss_mgr_status: whether IBSS is manager
+ * @gp2: last beacon time in gp2
+ */
+struct iwl_extended_beacon_notif {
+	struct iwl_mvm_tx_resp beacon_notify_hdr;
+	__le64 tsf;
+	__le32 ibss_mgr_status;
+	__le32 gp2;
+} __packed; /* BEACON_NTFY_API_S_VER_5 */
+
+/**
  * enum iwl_dump_control - dump (flush) control flags
  * @DUMP_TX_FIFO_FLUSH: Dump MSDUs until the the FIFO is empty
  *	and the TFD queues are empty.