Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights:

   1) Steady transitioning of the BPF instructure to a generic spot so
      all kernel subsystems can make use of it, from Alexei Starovoitov.

   2) SFC driver supports busy polling, from Alexandre Rames.

   3) Take advantage of hash table in UDP multicast delivery, from David
      Held.

   4) Lighten locking, in particular by getting rid of the LRU lists, in
      inet frag handling.  From Florian Westphal.

   5) Add support for various RFC6458 control messages in SCTP, from
      Geir Ola Vaagland.

   6) Allow to filter bridge forwarding database dumps by device, from
      Jamal Hadi Salim.

   7) virtio-net also now supports busy polling, from Jason Wang.

   8) Some low level optimization tweaks in pktgen from Jesper Dangaard
      Brouer.

   9) Add support for ipv6 address generation modes, so that userland
      can have some input into the process.  From Jiri Pirko.

  10) Consolidate common TCP connection request code in ipv4 and ipv6,
      from Octavian Purdila.

  11) New ARP packet logger in netfilter, from Pablo Neira Ayuso.

  12) Generic resizable RCU hash table, with intial users in netlink and
      nftables.  From Thomas Graf.

  13) Maintain a name assignment type so that userspace can see where a
      network device name came from (enumerated by kernel, assigned
      explicitly by userspace, etc.) From Tom Gundersen.

  14) Automatic flow label generation on transmit in ipv6, from Tom
      Herbert.

  15) New packet timestamping facilities from Willem de Bruijn, meant to
      assist in measuring latencies going into/out-of the packet
      scheduler, latency from TCP data transmission to ACK, etc"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1536 commits)
  cxgb4 : Disable recursive mailbox commands when enabling vi
  net: reduce USB network driver config options.
  tg3: Modify tg3_tso_bug() to handle multiple TX rings
  amd-xgbe: Perform phy connect/disconnect at dev open/stop
  amd-xgbe: Use dma_set_mask_and_coherent to set DMA mask
  net: sun4i-emac: fix memory leak on bad packet
  sctp: fix possible seqlock seadlock in sctp_packet_transmit()
  Revert "net: phy: Set the driver when registering an MDIO bus device"
  cxgb4vf: Turn off SGE RX/TX Callback Timers and interrupts in PCI shutdown routine
  team: Simplify return path of team_newlink
  bridge: Update outdated comment on promiscuous mode
  net-timestamp: ACK timestamp for bytestreams
  net-timestamp: TCP timestamping
  net-timestamp: SCHED timestamp on entering packet scheduler
  net-timestamp: add key to disambiguate concurrent datagrams
  net-timestamp: move timestamp flags out of sk_flags
  net-timestamp: extend SCM_TIMESTAMPING ancillary data struct
  cxgb4i : Move stray CPL definitions to cxgb4 driver
  tcp: reduce spurious retransmits due to transient SACK reneging
  qlcnic: Initialize dcbnl_ops before register_netdev
  ...

1 files changed, 77 insertions, 1 deletions

diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
index 309a9b9a94fe..95f5b3274efb 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
@@ -86,6 +86,8 @@ enum {
 
 #define IWL_MVM_STATION_COUNT	16
 
+#define IWL_MVM_TDLS_STA_COUNT	4
+
 /* commands */
 enum {
 	MVM_ALIVE = 0x1,
@@ -131,10 +133,12 @@ enum {
 	/* Scan offload */
 	SCAN_OFFLOAD_REQUEST_CMD = 0x51,
 	SCAN_OFFLOAD_ABORT_CMD = 0x52,
+	HOT_SPOT_CMD = 0x53,
 	SCAN_OFFLOAD_COMPLETE = 0x6D,
 	SCAN_OFFLOAD_UPDATE_PROFILES_CMD = 0x6E,
 	SCAN_OFFLOAD_CONFIG_CMD = 0x6f,
 	MATCH_FOUND_NOTIFICATION = 0xd9,
+	SCAN_ITERATION_COMPLETE = 0xe7,
 
 	/* Phy */
 	PHY_CONFIGURATION_CMD = 0x6a,
@@ -163,7 +167,6 @@ enum {
 	BEACON_NOTIFICATION = 0x90,
 	BEACON_TEMPLATE_CMD = 0x91,
 	TX_ANT_CONFIGURATION_CMD = 0x98,
-	BT_CONFIG = 0x9b,
 	STATISTICS_NOTIFICATION = 0x9d,
 	EOSP_NOTIFICATION = 0x9e,
 	REDUCE_TX_POWER_CMD = 0x9f,
@@ -185,6 +188,10 @@ enum {
 	BT_COEX_PRIO_TABLE = 0xcc,
 	BT_COEX_PROT_ENV = 0xcd,
 	BT_PROFILE_NOTIFICATION = 0xce,
+	BT_CONFIG = 0x9b,
+	BT_COEX_UPDATE_SW_BOOST = 0x5a,
+	BT_COEX_UPDATE_CORUN_LUT = 0x5b,
+	BT_COEX_UPDATE_REDUCED_TXP = 0x5c,
 	BT_COEX_CI = 0x5d,
 
 	REPLY_SF_CFG_CMD = 0xd1,
@@ -534,6 +541,9 @@ enum iwl_time_event_type {
 	/* WiDi Sync Events */
 	TE_WIDI_TX_SYNC,
 
+	/* Channel Switch NoA */
+	TE_P2P_GO_CSA_NOA,
+
 	TE_MAX
 }; /* MAC_EVENT_TYPE_API_E_VER_1 */
 
@@ -901,6 +911,72 @@ struct iwl_phy_context_cmd {
 	__le32 dsp_cfg_flags;
 } __packed; /* PHY_CONTEXT_CMD_API_VER_1 */
 
+/*
+ * Aux ROC command
+ *
+ * Command requests the firmware to create a time event for a certain duration
+ * and remain on the given channel. This is done by using the Aux framework in
+ * the FW.
+ * The command was first used for Hot Spot issues - but can be used regardless
+ * to Hot Spot.
+ *
+ * ( HOT_SPOT_CMD 0x53 )
+ *
+ * @id_and_color: ID and color of the MAC
+ * @action: action to perform, one of FW_CTXT_ACTION_*
+ * @event_unique_id: If the action FW_CTXT_ACTION_REMOVE then the
+ *	event_unique_id should be the id of the time event assigned by ucode.
+ *	Otherwise ignore the event_unique_id.
+ * @sta_id_and_color: station id and color, resumed during "Remain On Channel"
+ *	activity.
+ * @channel_info: channel info
+ * @node_addr: Our MAC Address
+ * @reserved: reserved for alignment
+ * @apply_time: GP2 value to start (should always be the current GP2 value)
+ * @apply_time_max_delay: Maximum apply time delay value in TU. Defines max
+ *	time by which start of the event is allowed to be postponed.
+ * @duration: event duration in TU To calculate event duration:
+ *	timeEventDuration = min(duration, remainingQuota)
+ */
+struct iwl_hs20_roc_req {
+	/* COMMON_INDEX_HDR_API_S_VER_1 hdr */
+	__le32 id_and_color;
+	__le32 action;
+	__le32 event_unique_id;
+	__le32 sta_id_and_color;
+	struct iwl_fw_channel_info channel_info;
+	u8 node_addr[ETH_ALEN];
+	__le16 reserved;
+	__le32 apply_time;
+	__le32 apply_time_max_delay;
+	__le32 duration;
+} __packed; /* HOT_SPOT_CMD_API_S_VER_1 */
+
+/*
+ * values for AUX ROC result values
+ */
+enum iwl_mvm_hot_spot {
+	HOT_SPOT_RSP_STATUS_OK,
+	HOT_SPOT_RSP_STATUS_TOO_MANY_EVENTS,
+	HOT_SPOT_MAX_NUM_OF_SESSIONS,
+};
+
+/*
+ * Aux ROC command response
+ *
+ * In response to iwl_hs20_roc_req the FW sends this command to notify the
+ * driver the uid of the timevent.
+ *
+ * ( HOT_SPOT_CMD 0x53 )
+ *
+ * @event_unique_id: Unique ID of time event assigned by ucode
+ * @status: Return status 0 is success, all the rest used for specific errors
+ */
+struct iwl_hs20_roc_res {
+	__le32 event_unique_id;
+	__le32 status;
+} __packed; /* HOT_SPOT_RSP_API_S_VER_1 */
+
 #define IWL_RX_INFO_PHY_CNT 8
 #define IWL_RX_INFO_ENERGY_ANT_ABC_IDX 1
 #define IWL_RX_INFO_ENERGY_ANT_A_MSK 0x000000ff