Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights:

   1) Steady transitioning of the BPF instructure to a generic spot so
      all kernel subsystems can make use of it, from Alexei Starovoitov.

   2) SFC driver supports busy polling, from Alexandre Rames.

   3) Take advantage of hash table in UDP multicast delivery, from David
      Held.

   4) Lighten locking, in particular by getting rid of the LRU lists, in
      inet frag handling.  From Florian Westphal.

   5) Add support for various RFC6458 control messages in SCTP, from
      Geir Ola Vaagland.

   6) Allow to filter bridge forwarding database dumps by device, from
      Jamal Hadi Salim.

   7) virtio-net also now supports busy polling, from Jason Wang.

   8) Some low level optimization tweaks in pktgen from Jesper Dangaard
      Brouer.

   9) Add support for ipv6 address generation modes, so that userland
      can have some input into the process.  From Jiri Pirko.

  10) Consolidate common TCP connection request code in ipv4 and ipv6,
      from Octavian Purdila.

  11) New ARP packet logger in netfilter, from Pablo Neira Ayuso.

  12) Generic resizable RCU hash table, with intial users in netlink and
      nftables.  From Thomas Graf.

  13) Maintain a name assignment type so that userspace can see where a
      network device name came from (enumerated by kernel, assigned
      explicitly by userspace, etc.) From Tom Gundersen.

  14) Automatic flow label generation on transmit in ipv6, from Tom
      Herbert.

  15) New packet timestamping facilities from Willem de Bruijn, meant to
      assist in measuring latencies going into/out-of the packet
      scheduler, latency from TCP data transmission to ACK, etc"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1536 commits)
  cxgb4 : Disable recursive mailbox commands when enabling vi
  net: reduce USB network driver config options.
  tg3: Modify tg3_tso_bug() to handle multiple TX rings
  amd-xgbe: Perform phy connect/disconnect at dev open/stop
  amd-xgbe: Use dma_set_mask_and_coherent to set DMA mask
  net: sun4i-emac: fix memory leak on bad packet
  sctp: fix possible seqlock seadlock in sctp_packet_transmit()
  Revert "net: phy: Set the driver when registering an MDIO bus device"
  cxgb4vf: Turn off SGE RX/TX Callback Timers and interrupts in PCI shutdown routine
  team: Simplify return path of team_newlink
  bridge: Update outdated comment on promiscuous mode
  net-timestamp: ACK timestamp for bytestreams
  net-timestamp: TCP timestamping
  net-timestamp: SCHED timestamp on entering packet scheduler
  net-timestamp: add key to disambiguate concurrent datagrams
  net-timestamp: move timestamp flags out of sk_flags
  net-timestamp: extend SCM_TIMESTAMPING ancillary data struct
  cxgb4i : Move stray CPL definitions to cxgb4 driver
  tcp: reduce spurious retransmits due to transient SACK reneging
  qlcnic: Initialize dcbnl_ops before register_netdev
  ...

1 files changed, 40 insertions, 48 deletions

diff --git a/drivers/net/wireless/rsi/rsi_91x_usb.c b/drivers/net/wireless/rsi/rsi_91x_usb.c
index 4c46e5631e2f..ef5d394f185b 100644
--- a/drivers/net/wireless/rsi/rsi_91x_usb.c
+++ b/drivers/net/wireless/rsi/rsi_91x_usb.c
@@ -25,7 +25,7 @@
  * @len: Length to be written.
  * @endpoint: Type of endpoint.
  *
- * Return: status: 0 on success, -1 on failure.
+ * Return: status: 0 on success, a negative error code on failure.
  */
 static int rsi_usb_card_write(struct rsi_hw *adapter,
 			      void *buf,
@@ -60,7 +60,7 @@ static int rsi_usb_card_write(struct rsi_hw *adapter,
  * @data: Pointer to the data that has to be written.
  * @count: Number of multiple bytes to be written.
  *
- * Return: 0 on success, -1 on failure.
+ * Return: 0 on success, a negative error code on failure.
  */
 static int rsi_write_multiple(struct rsi_hw *adapter,
 			      u8 endpoint,
@@ -147,7 +147,7 @@ static int rsi_find_bulk_in_and_out_endpoints(struct usb_interface *interface,
  * @value: Value to be read.
  * @len: length of data to be read.
  *
- * Return: status: 0 on success, -1 on failure.
+ * Return: status: 0 on success, a negative error code on failure.
  */
 static int rsi_usb_reg_read(struct usb_device *usbdev,
 			    u32 reg,
@@ -189,7 +189,7 @@ static int rsi_usb_reg_read(struct usb_device *usbdev,
  * @value: Value to write.
  * @len: Length of data to be written.
  *
- * Return: status: 0 on success, -1 on failure.
+ * Return: status: 0 on success, a negative error code on failure.
  */
 static int rsi_usb_reg_write(struct usb_device *usbdev,
 			     u32 reg,
@@ -249,7 +249,7 @@ static void rsi_rx_done_handler(struct urb *urb)
  * rsi_rx_urb_submit() - This function submits the given URB to the USB stack.
  * @adapter: Pointer to the adapter structure.
  *
- * Return: 0 on success, -1 on failure.
+ * Return: 0 on success, a negative error code on failure.
  */
 static int rsi_rx_urb_submit(struct rsi_hw *adapter)
 {
@@ -281,7 +281,7 @@ static int rsi_rx_urb_submit(struct rsi_hw *adapter)
  * @data: Pointer to the data that has to be written.
  * @count: Number of multiple bytes to be written on to the registers.
  *
- * Return: status: 0 on success, -1 on failure.
+ * Return: status: 0 on success, a negative error code on failure.
  */
 int rsi_usb_write_register_multiple(struct rsi_hw *adapter,
 				    u32 addr,
@@ -331,7 +331,7 @@ int rsi_usb_write_register_multiple(struct rsi_hw *adapter,
  * @pkt: Pointer to the data to be written on to the card.
  * @len: Length of the data to be written on to the card.
  *
- * Return: 0 on success, -1 on failure.
+ * Return: 0 on success, a negative error code on failure.
  */
 static int rsi_usb_host_intf_write_pkt(struct rsi_hw *adapter,
 				       u8 *pkt,
@@ -359,6 +359,7 @@ static void rsi_deinit_usb_interface(struct rsi_hw *adapter)
 	struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
 
 	rsi_kill_thread(&dev->rx_thread);
+	usb_free_urb(dev->rx_usb_urb[0]);
 	kfree(adapter->priv->rx_data_pkt);
 	kfree(dev->tx_buffer);
 }
@@ -368,7 +369,7 @@ static void rsi_deinit_usb_interface(struct rsi_hw *adapter)
  * @adapter: Pointer to the adapter structure.
  * @pfunction: Pointer to USB interface structure.
  *
- * Return: 0 on success, -1 on failure.
+ * Return: 0 on success, a negative error code on failure.
  */
 static int rsi_init_usb_interface(struct rsi_hw *adapter,
 				  struct usb_interface *pfunction)
@@ -397,8 +398,16 @@ static int rsi_init_usb_interface(struct rsi_hw *adapter,
 		return -ENOMEM;
 	}
 
-	rsi_dev->tx_buffer = kmalloc(2048, GFP_ATOMIC);
+	rsi_dev->tx_buffer = kmalloc(2048, GFP_KERNEL);
+	if (!rsi_dev->tx_buffer) {
+		status = -ENOMEM;
+		goto fail_tx;
+	}
 	rsi_dev->rx_usb_urb[0] = usb_alloc_urb(0, GFP_KERNEL);
+	if (!rsi_dev->rx_usb_urb[0]) {
+		status = -ENOMEM;
+		goto fail_rx;
+	}
 	rsi_dev->rx_usb_urb[0]->transfer_buffer = adapter->priv->rx_data_pkt;
 	rsi_dev->tx_blk_size = 252;
 
@@ -413,7 +422,7 @@ static int rsi_init_usb_interface(struct rsi_hw *adapter,
 				    rsi_usb_rx_thread, "RX-Thread");
 	if (status) {
 		rsi_dbg(ERR_ZONE, "%s: Unable to init rx thrd\n", __func__);
-		goto fail;
+		goto fail_thread;
 	}
 
 #ifdef CONFIG_RSI_DEBUGFS
@@ -424,8 +433,11 @@ static int rsi_init_usb_interface(struct rsi_hw *adapter,
 	rsi_dbg(INIT_ZONE, "%s: Enabled the interface\n", __func__);
 	return 0;
 
-fail:
+fail_thread:
+	usb_free_urb(rsi_dev->rx_usb_urb[0]);
+fail_rx:
 	kfree(rsi_dev->tx_buffer);
+fail_tx:
 	kfree(common->rx_data_pkt);
 	return status;
 }
@@ -437,7 +449,7 @@ fail:
  * @pfunction: Pointer to the USB interface structure.
  * @id: Pointer to the usb_device_id structure.
  *
- * Return: 0 on success, -1 on failure.
+ * Return: 0 on success, a negative error code on failure.
  */
 static int rsi_probe(struct usb_interface *pfunction,
 		     const struct usb_device_id *id)
@@ -445,6 +457,7 @@ static int rsi_probe(struct usb_interface *pfunction,
 	struct rsi_hw *adapter;
 	struct rsi_91x_usbdev *dev;
 	u16 fw_status;
+	int status;
 
 	rsi_dbg(INIT_ZONE, "%s: Init function called\n", __func__);
 
@@ -452,10 +465,11 @@ static int rsi_probe(struct usb_interface *pfunction,
 	if (!adapter) {
 		rsi_dbg(ERR_ZONE, "%s: Failed to init os intf ops\n",
 			__func__);
-		return 1;
+		return -ENOMEM;
 	}
 
-	if (rsi_init_usb_interface(adapter, pfunction)) {
+	status = rsi_init_usb_interface(adapter, pfunction);
+	if (status) {
 		rsi_dbg(ERR_ZONE, "%s: Failed to init usb interface\n",
 			__func__);
 		goto err;
@@ -465,26 +479,30 @@ static int rsi_probe(struct usb_interface *pfunction,
 
 	dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
 
-	if (rsi_usb_reg_read(dev->usbdev, FW_STATUS_REG, &fw_status, 2) < 0)
+	status = rsi_usb_reg_read(dev->usbdev, FW_STATUS_REG, &fw_status, 2);
+	if (status)
 		goto err1;
 	else
 		fw_status &= 1;
 
 	if (!fw_status) {
-		if (rsi_usb_device_init(adapter->priv)) {
+		status = rsi_usb_device_init(adapter->priv);
+		if (status) {
 			rsi_dbg(ERR_ZONE, "%s: Failed in device init\n",
 				__func__);
 			goto err1;
 		}
 
-		if (rsi_usb_reg_write(dev->usbdev,
-				      USB_INTERNAL_REG_1,
-				      RSI_USB_READY_MAGIC_NUM, 1) < 0)
+		status = rsi_usb_reg_write(dev->usbdev,
+					   USB_INTERNAL_REG_1,
+					   RSI_USB_READY_MAGIC_NUM, 1);
+		if (status)
 			goto err1;
 		rsi_dbg(INIT_ZONE, "%s: Performed device init\n", __func__);
 	}
 
-	if (rsi_rx_urb_submit(adapter))
+	status = rsi_rx_urb_submit(adapter);
+	if (status)
 		goto err1;
 
 	return 0;
@@ -493,7 +511,7 @@ err1:
 err:
 	rsi_91x_deinit(adapter);
 	rsi_dbg(ERR_ZONE, "%s: Failed in probe...Exiting\n", __func__);
-	return 1;
+	return status;
 }
 
 /**
@@ -550,33 +568,7 @@ static struct usb_driver rsi_driver = {
 #endif
 };
 
-/**
- * rsi_module_init() - This function registers the client driver.
- * @void: Void.
- *
- * Return: 0 on success.
- */
-static int rsi_module_init(void)
-{
-	usb_register(&rsi_driver);
-	rsi_dbg(INIT_ZONE, "%s: Registering driver\n", __func__);
-	return 0;
-}
-
-/**
- * rsi_module_exit() - This function unregisters the client driver.
- * @void: Void.
- *
- * Return: None.
- */
-static void rsi_module_exit(void)
-{
-	usb_deregister(&rsi_driver);
-	rsi_dbg(INFO_ZONE, "%s: Unregistering driver\n", __func__);
-}
-
-module_init(rsi_module_init);
-module_exit(rsi_module_exit);
+module_usb_driver(rsi_driver);
 
 MODULE_AUTHOR("Redpine Signals Inc");
 MODULE_DESCRIPTION("Common USB layer for RSI drivers");