diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2019-12-05 22:43:31 +0300 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2019-12-05 22:43:31 +0300 |
commit | ec939e4c94bd3ef2fd4f34c15f8aaf79bd0c5ee1 (patch) | |
tree | 1d39945dbdd233d35c571a726e135fe0ae845814 /drivers/reset | |
parent | 38206c24ab09b4f4c2a57de5c1af0bb2e69cf5b6 (diff) | |
parent | 3f6939aec712a15152c32516c1c543a91ac1e717 (diff) |
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Olof Johansson:
"Various driver updates for platforms:
- A larger set of work on Tegra 2/3 around memory controller and
regulator features, some fuse cleanups, etc..
- MMP platform drivers, in particular for USB PHY, and other smaller
additions.
- Samsung Exynos 5422 driver for DMC (dynamic memory configuration),
and ASV (adaptive voltage), allowing the platform to run at more
optimal operating points.
- Misc refactorings and support for RZ/G2N and R8A774B1 from Renesas
- Clock/reset control driver for TI/OMAP
- Meson-A1 reset controller support
- Qualcomm sdm845 and sda845 SoC IDs for socinfo"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (150 commits)
firmware: arm_scmi: Fix doorbell ring logic for !CONFIG_64BIT
soc: fsl: add RCPM driver
dt-bindings: fsl: rcpm: Add 'little-endian' and update Chassis definition
memory: tegra: Consolidate registers definition into common header
memory: tegra: Ensure timing control debug features are disabled
memory: tegra: Introduce Tegra30 EMC driver
memory: tegra: Do not handle error from wait_for_completion_timeout()
memory: tegra: Increase handshake timeout on Tegra20
memory: tegra: Print a brief info message about EMC timings
memory: tegra: Pre-configure debug register on Tegra20
memory: tegra: Include io.h instead of iopoll.h
memory: tegra: Adapt for Tegra20 clock driver changes
memory: tegra: Don't set EMC rate to maximum on probe for Tegra20
memory: tegra: Add gr2d and gr3d to DRM IOMMU group
memory: tegra: Set DMA mask based on supported address bits
soc: at91: Add Atmel SFR SN (Serial Number) support
memory: atmel-ebi: switch to SPDX license identifiers
memory: atmel-ebi: move NUM_CS definition inside EBI driver
soc: mediatek: Refactor bus protection control
soc: mediatek: Refactor sram control
...
Diffstat (limited to 'drivers/reset')
-rw-r--r-- | drivers/reset/Kconfig | 5 | ||||
-rw-r--r-- | drivers/reset/core.c | 8 | ||||
-rw-r--r-- | drivers/reset/hisilicon/reset-hi3660.c | 2 | ||||
-rw-r--r-- | drivers/reset/reset-meson-audio-arb.c | 43 | ||||
-rw-r--r-- | drivers/reset/reset-meson.c | 35 | ||||
-rw-r--r-- | drivers/reset/reset-uniphier-glue.c | 4 | ||||
-rw-r--r-- | drivers/reset/reset-zynqmp.c | 2 |
7 files changed, 81 insertions, 18 deletions
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index 7b07281aa0ae..3ad7817ce1f0 100644 --- a/drivers/reset/Kconfig +++ b/drivers/reset/Kconfig @@ -129,7 +129,7 @@ config RESET_SCMI config RESET_SIMPLE bool "Simple Reset Controller Driver" if COMPILE_TEST - default ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARCH_ASPEED || ARCH_BITMAIN || ARC + default ARCH_AGILEX || ARCH_ASPEED || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARC help This enables a simple reset controller driver for reset lines that that can be asserted and deasserted by toggling bits in a contiguous, @@ -138,10 +138,11 @@ config RESET_SIMPLE Currently this driver supports: - Altera SoCFPGAs - ASPEED BMC SoCs + - Bitmain BM1880 SoC + - Realtek SoCs - RCC reset controller in STM32 MCUs - Allwinner SoCs - ZTE's zx2967 family - - Bitmain BM1880 SoC config RESET_STM32MP157 bool "STM32MP157 Reset Driver" if COMPILE_TEST diff --git a/drivers/reset/core.c b/drivers/reset/core.c index 3c9a64c1b7a8..ca1d49146f61 100644 --- a/drivers/reset/core.c +++ b/drivers/reset/core.c @@ -77,8 +77,10 @@ static const char *rcdev_name(struct reset_controller_dev *rcdev) * @rcdev: a pointer to the reset controller device * @reset_spec: reset line specifier as found in the device tree * - * This simple translation function should be used for reset controllers - * with 1:1 mapping, where reset lines can be indexed by number without gaps. + * This static translation function is used by default if of_xlate in + * :c:type:`reset_controller_dev` is not set. It is useful for all reset + * controllers with 1:1 mapping, where reset lines can be indexed by number + * without gaps. */ static int of_reset_simple_xlate(struct reset_controller_dev *rcdev, const struct of_phandle_args *reset_spec) @@ -333,7 +335,6 @@ EXPORT_SYMBOL_GPL(reset_control_reset); * internal state to be reset, but must be prepared for this to happen. * Consumers must not use reset_control_reset on shared reset lines when * reset_control_(de)assert has been used. - * return 0. * * If rstc is NULL it is an optional reset and the function will just * return 0. @@ -392,7 +393,6 @@ EXPORT_SYMBOL_GPL(reset_control_assert); * After calling this function, the reset is guaranteed to be deasserted. * Consumers must not use reset_control_reset on shared reset lines when * reset_control_(de)assert has been used. - * return 0. * * If rstc is NULL it is an optional reset and the function will just * return 0. diff --git a/drivers/reset/hisilicon/reset-hi3660.c b/drivers/reset/hisilicon/reset-hi3660.c index f690b1878071..a7d4445924e5 100644 --- a/drivers/reset/hisilicon/reset-hi3660.c +++ b/drivers/reset/hisilicon/reset-hi3660.c @@ -56,7 +56,7 @@ static int hi3660_reset_dev(struct reset_controller_dev *rcdev, return hi3660_reset_deassert(rcdev, idx); } -static struct reset_control_ops hi3660_reset_ops = { +static const struct reset_control_ops hi3660_reset_ops = { .reset = hi3660_reset_dev, .assert = hi3660_reset_assert, .deassert = hi3660_reset_deassert, diff --git a/drivers/reset/reset-meson-audio-arb.c b/drivers/reset/reset-meson-audio-arb.c index c53a2185a039..1dc06e08a8da 100644 --- a/drivers/reset/reset-meson-audio-arb.c +++ b/drivers/reset/reset-meson-audio-arb.c @@ -19,6 +19,11 @@ struct meson_audio_arb_data { spinlock_t lock; }; +struct meson_audio_arb_match_data { + const unsigned int *reset_bits; + unsigned int reset_num; +}; + #define ARB_GENERAL_BIT 31 static const unsigned int axg_audio_arb_reset_bits[] = { @@ -30,6 +35,27 @@ static const unsigned int axg_audio_arb_reset_bits[] = { [AXG_ARB_FRDDR_C] = 6, }; +static const struct meson_audio_arb_match_data axg_audio_arb_match = { + .reset_bits = axg_audio_arb_reset_bits, + .reset_num = ARRAY_SIZE(axg_audio_arb_reset_bits), +}; + +static const unsigned int sm1_audio_arb_reset_bits[] = { + [AXG_ARB_TODDR_A] = 0, + [AXG_ARB_TODDR_B] = 1, + [AXG_ARB_TODDR_C] = 2, + [AXG_ARB_FRDDR_A] = 4, + [AXG_ARB_FRDDR_B] = 5, + [AXG_ARB_FRDDR_C] = 6, + [AXG_ARB_TODDR_D] = 3, + [AXG_ARB_FRDDR_D] = 7, +}; + +static const struct meson_audio_arb_match_data sm1_audio_arb_match = { + .reset_bits = sm1_audio_arb_reset_bits, + .reset_num = ARRAY_SIZE(sm1_audio_arb_reset_bits), +}; + static int meson_audio_arb_update(struct reset_controller_dev *rcdev, unsigned long id, bool assert) { @@ -82,7 +108,13 @@ static const struct reset_control_ops meson_audio_arb_rstc_ops = { }; static const struct of_device_id meson_audio_arb_of_match[] = { - { .compatible = "amlogic,meson-axg-audio-arb", }, + { + .compatible = "amlogic,meson-axg-audio-arb", + .data = &axg_audio_arb_match, + }, { + .compatible = "amlogic,meson-sm1-audio-arb", + .data = &sm1_audio_arb_match, + }, {} }; MODULE_DEVICE_TABLE(of, meson_audio_arb_of_match); @@ -104,10 +136,15 @@ static int meson_audio_arb_remove(struct platform_device *pdev) static int meson_audio_arb_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; + const struct meson_audio_arb_match_data *data; struct meson_audio_arb_data *arb; struct resource *res; int ret; + data = of_device_get_match_data(dev); + if (!data) + return -EINVAL; + arb = devm_kzalloc(dev, sizeof(*arb), GFP_KERNEL); if (!arb) return -ENOMEM; @@ -126,8 +163,8 @@ static int meson_audio_arb_probe(struct platform_device *pdev) return PTR_ERR(arb->regs); spin_lock_init(&arb->lock); - arb->reset_bits = axg_audio_arb_reset_bits; - arb->rstc.nr_resets = ARRAY_SIZE(axg_audio_arb_reset_bits); + arb->reset_bits = data->reset_bits; + arb->rstc.nr_resets = data->reset_num; arb->rstc.ops = &meson_audio_arb_rstc_ops; arb->rstc.of_node = dev->of_node; arb->rstc.owner = THIS_MODULE; diff --git a/drivers/reset/reset-meson.c b/drivers/reset/reset-meson.c index 7d05d766e1ea..94d7ba88d7d2 100644 --- a/drivers/reset/reset-meson.c +++ b/drivers/reset/reset-meson.c @@ -15,12 +15,16 @@ #include <linux/types.h> #include <linux/of_device.h> -#define REG_COUNT 8 #define BITS_PER_REG 32 -#define LEVEL_OFFSET 0x7c + +struct meson_reset_param { + int reg_count; + int level_offset; +}; struct meson_reset { void __iomem *reg_base; + const struct meson_reset_param *param; struct reset_controller_dev rcdev; spinlock_t lock; }; @@ -46,10 +50,12 @@ static int meson_reset_level(struct reset_controller_dev *rcdev, container_of(rcdev, struct meson_reset, rcdev); unsigned int bank = id / BITS_PER_REG; unsigned int offset = id % BITS_PER_REG; - void __iomem *reg_addr = data->reg_base + LEVEL_OFFSET + (bank << 2); + void __iomem *reg_addr; unsigned long flags; u32 reg; + reg_addr = data->reg_base + data->param->level_offset + (bank << 2); + spin_lock_irqsave(&data->lock, flags); reg = readl(reg_addr); @@ -81,10 +87,21 @@ static const struct reset_control_ops meson_reset_ops = { .deassert = meson_reset_deassert, }; +static const struct meson_reset_param meson8b_param = { + .reg_count = 8, + .level_offset = 0x7c, +}; + +static const struct meson_reset_param meson_a1_param = { + .reg_count = 3, + .level_offset = 0x40, +}; + static const struct of_device_id meson_reset_dt_ids[] = { - { .compatible = "amlogic,meson8b-reset" }, - { .compatible = "amlogic,meson-gxbb-reset" }, - { .compatible = "amlogic,meson-axg-reset" }, + { .compatible = "amlogic,meson8b-reset", .data = &meson8b_param}, + { .compatible = "amlogic,meson-gxbb-reset", .data = &meson8b_param}, + { .compatible = "amlogic,meson-axg-reset", .data = &meson8b_param}, + { .compatible = "amlogic,meson-a1-reset", .data = &meson_a1_param}, { /* sentinel */ }, }; @@ -102,12 +119,16 @@ static int meson_reset_probe(struct platform_device *pdev) if (IS_ERR(data->reg_base)) return PTR_ERR(data->reg_base); + data->param = of_device_get_match_data(&pdev->dev); + if (!data->param) + return -ENODEV; + platform_set_drvdata(pdev, data); spin_lock_init(&data->lock); data->rcdev.owner = THIS_MODULE; - data->rcdev.nr_resets = REG_COUNT * BITS_PER_REG; + data->rcdev.nr_resets = data->param->reg_count * BITS_PER_REG; data->rcdev.ops = &meson_reset_ops; data->rcdev.of_node = pdev->dev.of_node; diff --git a/drivers/reset/reset-uniphier-glue.c b/drivers/reset/reset-uniphier-glue.c index a45923f4df6d..2b188b3bb69a 100644 --- a/drivers/reset/reset-uniphier-glue.c +++ b/drivers/reset/reset-uniphier-glue.c @@ -141,6 +141,10 @@ static const struct of_device_id uniphier_glue_reset_match[] = { .data = &uniphier_pro4_data, }, { + .compatible = "socionext,uniphier-pro5-usb3-reset", + .data = &uniphier_pro4_data, + }, + { .compatible = "socionext,uniphier-pxs2-usb3-reset", .data = &uniphier_pxs2_data, }, diff --git a/drivers/reset/reset-zynqmp.c b/drivers/reset/reset-zynqmp.c index 99e75d92dada..0144075b11a6 100644 --- a/drivers/reset/reset-zynqmp.c +++ b/drivers/reset/reset-zynqmp.c @@ -64,7 +64,7 @@ static int zynqmp_reset_reset(struct reset_controller_dev *rcdev, PM_RESET_ACTION_PULSE); } -static struct reset_control_ops zynqmp_reset_ops = { +static const struct reset_control_ops zynqmp_reset_ops = { .reset = zynqmp_reset_reset, .assert = zynqmp_reset_assert, .deassert = zynqmp_reset_deassert, |