diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2022-08-04 21:41:28 +0300 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2022-08-04 21:41:28 +0300 |
commit | 9e2e5ea3b28f81512c792f30729edb1db0c21f6a (patch) | |
tree | 5543cd085f766f3adf0fee3389b9a7715f956886 /drivers/staging | |
parent | cfeafd94668910334a77c9437a18212baf9f5610 (diff) | |
parent | 8288c99fc263bcafc5df5fa8c278b2eb8106364e (diff) |
Merge tag 'usb-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of Thunderbolt and USB changes for 6.0-rc1.
Lots of little things here, nothing major, just constant development
on some new hardware support and cleanups of older drivers. Highlights
are:
- lots of typec changes and improvements for new hardware
- new gadget controller driver
- thunderbolt support for new hardware
- the normal set of new usb-serial device ids and cleanups
- loads of dwc3 controller fixes and improvements
- mtu3 driver updates
- testusb fixes for longtime issues (not many people use this tool it
seems.)
- minor driver fixes and improvements over the USB tree
- chromeos platform driver changes were added and then reverted as
they depened on some typec changes, but the cross-tree merges
caused problems so they will come back later through the platform
tree.
All of these have been in linux-next for a while now with no reported
issues"
* tag 'usb-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (193 commits)
usb: misc: onboard_usb_hub: Remove duplicated power_on delay
usb: misc: onboard_usb_hub: Add TI USB8041 hub support
usb: misc: onboard_usb_hub: Add reset-gpio support
USB: usbsevseg: convert sysfs snprintf to sysfs_emit
dt-bindings: usb: Add binding for TI USB8041 hub controller
ARM: multi_v7_defconfig: enable USB onboard HUB driver
ARM: dts: stm32: add support for USB2514B onboard hub on stm32mp15xx-dkx
usb: misc: onboard-hub: add support for Microchip USB2514B USB 2.0 hub
dt-bindings: usb: generic-ehci: allow usb-hcd schema properties
usb: typec: ucsi: stm32g0: add bootloader support
usb: typec: ucsi: stm32g0: add support for stm32g0 controller
dt-bindings: usb: typec: add bindings for stm32g0 controller
usb: typec: ucsi: Acknowledge the GET_ERROR_STATUS command completion
usb: cdns3: change place of 'priv_ep' assignment in cdns3_gadget_ep_dequeue(), cdns3_gadget_ep_enable()
usb/chipidea: fix repeated words in comments
usb: renesas-xhci: Do not print any log while fw verif success
usb: typec: retimer: Add missing id check in match callback
USB: xhci: Fix comment typo
usb/typec/tcpm: fix repeated words in comments
usb/musb: fix repeated words in comments
...
Diffstat (limited to 'drivers/staging')
-rw-r--r-- | drivers/staging/Kconfig | 2 | ||||
-rw-r--r-- | drivers/staging/Makefile | 1 | ||||
-rw-r--r-- | drivers/staging/gdm724x/gdm_tty.c | 6 | ||||
-rw-r--r-- | drivers/staging/octeon-usb/Kconfig | 11 | ||||
-rw-r--r-- | drivers/staging/octeon-usb/Makefile | 2 | ||||
-rw-r--r-- | drivers/staging/octeon-usb/TODO | 8 | ||||
-rw-r--r-- | drivers/staging/octeon-usb/octeon-hcd.c | 3740 | ||||
-rw-r--r-- | drivers/staging/octeon-usb/octeon-hcd.h | 1847 |
8 files changed, 0 insertions, 5617 deletions
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index 0a993c47273e..3bd80f9695ac 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -42,8 +42,6 @@ source "drivers/staging/rts5208/Kconfig" source "drivers/staging/octeon/Kconfig" -source "drivers/staging/octeon-usb/Kconfig" - source "drivers/staging/vt6655/Kconfig" source "drivers/staging/vt6656/Kconfig" diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index 2800ab9b2d1d..1d9ae39fea14 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -11,7 +11,6 @@ obj-$(CONFIG_R8712U) += rtl8712/ obj-$(CONFIG_R8188EU) += r8188eu/ obj-$(CONFIG_RTS5208) += rts5208/ obj-$(CONFIG_OCTEON_ETHERNET) += octeon/ -obj-$(CONFIG_OCTEON_USB) += octeon-usb/ obj-$(CONFIG_VT6655) += vt6655/ obj-$(CONFIG_VT6656) += vt6656/ obj-$(CONFIG_VME_BUS) += vme_user/ diff --git a/drivers/staging/gdm724x/gdm_tty.c b/drivers/staging/gdm724x/gdm_tty.c index 04df6f9f5403..cc6d80554c98 100644 --- a/drivers/staging/gdm724x/gdm_tty.c +++ b/drivers/staging/gdm724x/gdm_tty.c @@ -17,12 +17,6 @@ #define GDM_TTY_MAJOR 0 #define GDM_TTY_MINOR 32 -#define ACM_CTRL_DTR 0x01 -#define ACM_CTRL_RTS 0x02 -#define ACM_CTRL_DSR 0x02 -#define ACM_CTRL_RI 0x08 -#define ACM_CTRL_DCD 0x01 - #define WRITE_SIZE 2048 #define MUX_TX_MAX_SIZE 2048 diff --git a/drivers/staging/octeon-usb/Kconfig b/drivers/staging/octeon-usb/Kconfig deleted file mode 100644 index 6a5d842ee0f2..000000000000 --- a/drivers/staging/octeon-usb/Kconfig +++ /dev/null @@ -1,11 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -config OCTEON_USB - tristate "Cavium Networks Octeon USB support" - depends on CAVIUM_OCTEON_SOC && USB - help - This driver supports USB host controller on some Cavium - Networks' products in the Octeon family. - - To compile this driver as a module, choose M here. The module - will be called octeon-hcd. - diff --git a/drivers/staging/octeon-usb/Makefile b/drivers/staging/octeon-usb/Makefile deleted file mode 100644 index 9873a0130ad5..000000000000 --- a/drivers/staging/octeon-usb/Makefile +++ /dev/null @@ -1,2 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -obj-${CONFIG_OCTEON_USB} := octeon-hcd.o diff --git a/drivers/staging/octeon-usb/TODO b/drivers/staging/octeon-usb/TODO deleted file mode 100644 index 2b29acca5caa..000000000000 --- a/drivers/staging/octeon-usb/TODO +++ /dev/null @@ -1,8 +0,0 @@ -This driver is functional and has been tested on EdgeRouter Lite, -D-Link DSR-1000N and EBH5600 evaluation board with USB mass storage. - -TODO: - - kernel coding style - - checkpatch warnings - -Contact: Aaro Koskinen <aaro.koskinen@iki.fi> diff --git a/drivers/staging/octeon-usb/octeon-hcd.c b/drivers/staging/octeon-usb/octeon-hcd.c deleted file mode 100644 index a1cd81d4a114..000000000000 --- a/drivers/staging/octeon-usb/octeon-hcd.c +++ /dev/null @@ -1,3740 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2008 Cavium Networks - * - * Some parts of the code were originally released under BSD license: - * - * Copyright (c) 2003-2010 Cavium Networks (support@cavium.com). All rights - * reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are - * met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * * Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials provided - * with the distribution. - * - * * Neither the name of Cavium Networks nor the names of - * its contributors may be used to endorse or promote products - * derived from this software without specific prior written - * permission. - * - * This Software, including technical data, may be subject to U.S. export - * control laws, including the U.S. Export Administration Act and its associated - * regulations, and may be subject to export or import regulations in other - * countries. - * - * TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS" - * AND WITH ALL FAULTS AND CAVIUM NETWORKS MAKES NO PROMISES, REPRESENTATIONS OR - * WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO - * THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION - * OR DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM - * SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE, - * MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF - * VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR - * CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT OF USE OR - * PERFORMANCE OF THE SOFTWARE LIES WITH YOU. - */ - -#include <linux/usb.h> -#include <linux/slab.h> -#include <linux/module.h> -#include <linux/usb/hcd.h> -#include <linux/prefetch.h> -#include <linux/irqdomain.h> -#include <linux/dma-mapping.h> -#include <linux/platform_device.h> -#include <linux/of.h> - -#include <asm/octeon/octeon.h> - -#include "octeon-hcd.h" - -/** - * enum cvmx_usb_speed - the possible USB device speeds - * - * @CVMX_USB_SPEED_HIGH: Device is operation at 480Mbps - * @CVMX_USB_SPEED_FULL: Device is operation at 12Mbps - * @CVMX_USB_SPEED_LOW: Device is operation at 1.5Mbps - */ -enum cvmx_usb_speed { - CVMX_USB_SPEED_HIGH = 0, - CVMX_USB_SPEED_FULL = 1, - CVMX_USB_SPEED_LOW = 2, -}; - -/** - * enum cvmx_usb_transfer - the possible USB transfer types - * - * @CVMX_USB_TRANSFER_CONTROL: USB transfer type control for hub and status - * transfers - * @CVMX_USB_TRANSFER_ISOCHRONOUS: USB transfer type isochronous for low - * priority periodic transfers - * @CVMX_USB_TRANSFER_BULK: USB transfer type bulk for large low priority - * transfers - * @CVMX_USB_TRANSFER_INTERRUPT: USB transfer type interrupt for high priority - * periodic transfers - */ -enum cvmx_usb_transfer { - CVMX_USB_TRANSFER_CONTROL = 0, - CVMX_USB_TRANSFER_ISOCHRONOUS = 1, - CVMX_USB_TRANSFER_BULK = 2, - CVMX_USB_TRANSFER_INTERRUPT = 3, -}; - -/** - * enum cvmx_usb_direction - the transfer directions - * - * @CVMX_USB_DIRECTION_OUT: Data is transferring from Octeon to the device/host - * @CVMX_USB_DIRECTION_IN: Data is transferring from the device/host to Octeon - */ -enum cvmx_usb_direction { - CVMX_USB_DIRECTION_OUT, - CVMX_USB_DIRECTION_IN, -}; - -/** - * enum cvmx_usb_status - possible callback function status codes - * - * @CVMX_USB_STATUS_OK: The transaction / operation finished without - * any errors - * @CVMX_USB_STATUS_SHORT: FIXME: This is currently not implemented - * @CVMX_USB_STATUS_CANCEL: The transaction was canceled while in flight - * by a user call to cvmx_usb_cancel - * @CVMX_USB_STATUS_ERROR: The transaction aborted with an unexpected - * error status - * @CVMX_USB_STATUS_STALL: The transaction received a USB STALL response - * from the device - * @CVMX_USB_STATUS_XACTERR: The transaction failed with an error from the - * device even after a number of retries - * @CVMX_USB_STATUS_DATATGLERR: The transaction failed with a data toggle - * error even after a number of retries - * @CVMX_USB_STATUS_BABBLEERR: The transaction failed with a babble error - * @CVMX_USB_STATUS_FRAMEERR: The transaction failed with a frame error - * even after a number of retries - */ -enum cvmx_usb_status { - CVMX_USB_STATUS_OK, - CVMX_USB_STATUS_SHORT, - CVMX_USB_STATUS_CANCEL, - CVMX_USB_STATUS_ERROR, - CVMX_USB_STATUS_STALL, - CVMX_USB_STATUS_XACTERR, - CVMX_USB_STATUS_DATATGLERR, - CVMX_USB_STATUS_BABBLEERR, - CVMX_USB_STATUS_FRAMEERR, -}; - -/** - * struct cvmx_usb_port_status - the USB port status information - * - * @port_enabled: 1 = Usb port is enabled, 0 = disabled - * @port_over_current: 1 = Over current detected, 0 = Over current not - * detected. Octeon doesn't support over current detection. - * @port_powered: 1 = Port power is being supplied to the device, 0 = - * power is off. Octeon doesn't support turning port power - * off. - * @port_speed: Current port speed. - * @connected: 1 = A device is connected to the port, 0 = No device is - * connected. - * @connect_change: 1 = Device connected state changed since the last set - * status call. - */ -struct cvmx_usb_port_status { - u32 reserved : 25; - u32 port_enabled : 1; - u32 port_over_current : 1; - u32 port_powered : 1; - enum cvmx_usb_speed port_speed : 2; - u32 connected : 1; - u32 connect_change : 1; -}; - -/** - * struct cvmx_usb_iso_packet - descriptor for Isochronous packets - * - * @offset: This is the offset in bytes into the main buffer where this data - * is stored. - * @length: This is the length in bytes of the data. - * @status: This is the status of this individual packet transfer. - */ -struct cvmx_usb_iso_packet { - int offset; - int length; - enum cvmx_usb_status status; -}; - -/** - * enum cvmx_usb_initialize_flags - flags used by the initialization function - * - * @CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_XI: The USB port uses a 12MHz crystal - * as clock source at USB_XO and - * USB_XI. - * @CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND: The USB port uses 12/24/48MHz 2.5V - * board clock source at USB_XO. - * USB_XI should be tied to GND. - * @CVMX_USB_INITIALIZE_FLAGS_CLOCK_MHZ_MASK: Mask for clock speed field - * @CVMX_USB_INITIALIZE_FLAGS_CLOCK_12MHZ: Speed of reference clock or - * crystal - * @CVMX_USB_INITIALIZE_FLAGS_CLOCK_24MHZ: Speed of reference clock - * @CVMX_USB_INITIALIZE_FLAGS_CLOCK_48MHZ: Speed of reference clock - * @CVMX_USB_INITIALIZE_FLAGS_NO_DMA: Disable DMA and used polled IO for - * data transfer use for the USB - */ -enum cvmx_usb_initialize_flags { - CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_XI = 1 << 0, - CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND = 1 << 1, - CVMX_USB_INITIALIZE_FLAGS_CLOCK_MHZ_MASK = 3 << 3, - CVMX_USB_INITIALIZE_FLAGS_CLOCK_12MHZ = 1 << 3, - CVMX_USB_INITIALIZE_FLAGS_CLOCK_24MHZ = 2 << 3, - CVMX_USB_INITIALIZE_FLAGS_CLOCK_48MHZ = 3 << 3, - /* Bits 3-4 used to encode the clock frequency */ - CVMX_USB_INITIALIZE_FLAGS_NO_DMA = 1 << 5, -}; - -/** - * enum cvmx_usb_pipe_flags - internal flags for a pipe. - * - * @CVMX_USB_PIPE_FLAGS_SCHEDULED: Used internally to determine if a pipe is - * actively using hardware. - * @CVMX_USB_PIPE_FLAGS_NEED_PING: Used internally to determine if a high speed - * pipe is in the ping state. - */ -enum cvmx_usb_pipe_flags { - CVMX_USB_PIPE_FLAGS_SCHEDULED = 1 << 17, - CVMX_USB_PIPE_FLAGS_NEED_PING = 1 << 18, -}; - -/* Maximum number of times to retry failed transactions */ -#define MAX_RETRIES 3 - -/* Maximum number of hardware channels supported by the USB block */ -#define MAX_CHANNELS 8 - -/* - * The low level hardware can transfer a maximum of this number of bytes in each - * transfer. The field is 19 bits wide - */ -#define MAX_TRANSFER_BYTES ((1 << 19) - 1) - -/* - * The low level hardware can transfer a maximum of this number of packets in - * each transfer. The field is 10 bits wide - */ -#define MAX_TRANSFER_PACKETS ((1 << 10) - 1) - -/** - * Logical transactions may take numerous low level - * transactions, especially when splits are concerned. This - * enum represents all of the possible stages a transaction can - * be in. Note that split completes are always even. This is so - * the NAK handler can backup to the previous low level - * transaction with a simple clearing of bit 0. - */ -enum cvmx_usb_stage { - CVMX_USB_STAGE_NON_CONTROL, - CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE, - CVMX_USB_STAGE_SETUP, - CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE, - CVMX_USB_STAGE_DATA, - CVMX_USB_STAGE_DATA_SPLIT_COMPLETE, - CVMX_USB_STAGE_STATUS, - CVMX_USB_STAGE_STATUS_SPLIT_COMPLETE, -}; - -/** - * struct cvmx_usb_transaction - describes each pending USB transaction - * regardless of type. These are linked together - * to form a list of pending requests for a pipe. - * - * @node: List node for transactions in the pipe. - * @type: Type of transaction, duplicated of the pipe. - * @flags: State flags for this transaction. - * @buffer: User's physical buffer address to read/write. - * @buffer_length: Size of the user's buffer in bytes. - * @control_header: For control transactions, physical address of the 8 - * byte standard header. - * @iso_start_frame: For ISO transactions, the starting frame number. - * @iso_number_packets: For ISO transactions, the number of packets in the - * request. - * @iso_packets: For ISO transactions, the sub packets in the request. - * @actual_bytes: Actual bytes transfer for this transaction. - * @stage: For control transactions, the current stage. - * @urb: URB. - */ -struct cvmx_usb_transaction { - struct list_head node; - enum cvmx_usb_transfer type; - u64 buffer; - int buffer_length; - u64 control_header; - int iso_start_frame; - int iso_number_packets; - struct cvmx_usb_iso_packet *iso_packets; - int xfersize; - int pktcnt; - int retries; - int actual_bytes; - enum cvmx_usb_stage stage; - struct urb *urb; -}; - -/** - * struct cvmx_usb_pipe - a pipe represents a virtual connection between Octeon - * and some USB device. It contains a list of pending - * request to the device. - * - * @node: List node for pipe list - * @next: Pipe after this one in the list - * @transactions: List of pending transactions - * @interval: For periodic pipes, the interval between packets in - * frames - * @next_tx_frame: The next frame this pipe is allowed to transmit on - * @flags: State flags for this pipe - * @device_speed: Speed of device connected to this pipe - * @transfer_type: Type of transaction supported by this pipe - * @transfer_dir: IN or OUT. Ignored for Control - * @multi_count: Max packet in a row for the device - * @max_packet: The device's maximum packet size in bytes - * @device_addr: USB device address at other end of pipe - * @endpoint_num: USB endpoint number at other end of pipe - * @hub_device_addr: Hub address this device is connected to - * @hub_port: Hub port this device is connected to - * @pid_toggle: This toggles between 0/1 on every packet send to track - * the data pid needed - * @channel: Hardware DMA channel for this pipe - * @split_sc_frame: The low order bits of the frame number the split - * complete should be sent on - */ -struct cvmx_usb_pipe { - struct list_head node; - struct list_head transactions; - u64 interval; - u64 next_tx_frame; - enum cvmx_usb_pipe_flags flags; - enum cvmx_usb_speed device_speed; - enum cvmx_usb_transfer transfer_type; - enum cvmx_usb_direction transfer_dir; - int multi_count; - u16 max_packet; - u8 device_addr; - u8 endpoint_num; - u8 hub_device_addr; - u8 hub_port; - u8 pid_toggle; - u8 channel; - s8 split_sc_frame; -}; - -struct cvmx_usb_tx_fifo { - struct { - int channel; - int size; - u64 address; - } entry[MAX_CHANNELS + 1]; - int head; - int tail; -}; - -/** - * struct octeon_hcd - the state of the USB block - * - * lock: Serialization lock. - * init_flags: Flags passed to initialize. - * index: Which USB block this is for. - * idle_hardware_channels: Bit set for every idle hardware channel. - * usbcx_hprt: Stored port status so we don't need to read a CSR to - * determine splits. - * pipe_for_channel: Map channels to pipes. - * pipe: Storage for pipes. - * indent: Used by debug output to indent functions. - * port_status: Last port status used for change notification. - * idle_pipes: List of open pipes that have no transactions. - * active_pipes: Active pipes indexed by transfer type. - * frame_number: Increments every SOF interrupt for time keeping. - * active_split: Points to the current active split, or NULL. - */ -struct octeon_hcd { - spinlock_t lock; /* serialization lock */ - int init_flags; - int index; - int idle_hardware_channels; - union cvmx_usbcx_hprt usbcx_hprt; - struct cvmx_usb_pipe *pipe_for_channel[MAX_CHANNELS]; - int indent; - struct cvmx_usb_port_status port_status; - struct list_head idle_pipes; - struct list_head active_pipes[4]; - u64 frame_number; - struct cvmx_usb_transaction *active_split; - struct cvmx_usb_tx_fifo periodic; - struct cvmx_usb_tx_fifo nonperiodic; -}; - -/* - * This macro logically sets a single field in a CSR. It does the sequence - * read, modify, and write - */ -#define USB_SET_FIELD32(address, _union, field, value) \ - do { \ - union _union c; \ - \ - c.u32 = cvmx_usb_read_csr32(usb, address); \ - c.s.field = value; \ - cvmx_usb_write_csr32(usb, address, c.u32); \ - } while (0) - -/* Returns the IO address to push/pop stuff data from the FIFOs */ -#define USB_FIFO_ADDRESS(channel, usb_index) \ - (CVMX_USBCX_GOTGCTL(usb_index) + ((channel) + 1) * 0x1000) - -/** - * struct octeon_temp_buffer - a bounce buffer for USB transfers - * @orig_buffer: the original buffer passed by the USB stack - * @data: the newly allocated temporary buffer (excluding meta-data) - * - * Both the DMA engine and FIFO mode will always transfer full 32-bit words. If - * the buffer is too short, we need to allocate a temporary one, and this struct - * represents it. - */ -struct octeon_temp_buffer { - void *orig_buffer; - u8 data[]; -}; - -static inline struct usb_hcd *octeon_to_hcd(struct octeon_hcd *p) -{ - return container_of((void *)p, struct usb_hcd, hcd_priv); -} - -/** - * octeon_alloc_temp_buffer - allocate a temporary buffer for USB transfer - * (if needed) - * @urb: URB. - * @mem_flags: Memory allocation flags. - * - * This function allocates a temporary bounce buffer whenever it's needed - * due to HW limitations. - */ -static int octeon_alloc_temp_buffer(struct urb *urb, gfp_t mem_flags) -{ - struct octeon_temp_buffer *temp; - - if (urb->num_sgs || urb->sg || - (urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP) || - !(urb->transfer_buffer_length % sizeof(u32))) - return 0; - - temp = kmalloc(ALIGN(urb->transfer_buffer_length, sizeof(u32)) + - sizeof(*temp), mem_flags); - if (!temp) - return -ENOMEM; - - temp->orig_buffer = urb->transfer_buffer; - if (usb_urb_dir_out(urb)) - memcpy(temp->data, urb->transfer_buffer, - urb->transfer_buffer_length); - urb->transfer_buffer = temp->data; - urb->transfer_flags |= URB_ALIGNED_TEMP_BUFFER; - - return 0; -} - -/** - * octeon_free_temp_buffer - free a temporary buffer used by USB transfers. - * @urb: URB. - * - * Frees a buffer allocated by octeon_alloc_temp_buffer(). - */ -static void octeon_free_temp_buffer(struct urb *urb) -{ - struct octeon_temp_buffer *temp; - size_t length; - - if (!(urb->transfer_flags & URB_ALIGNED_TEMP_BUFFER)) - return; - - temp = container_of(urb->transfer_buffer, struct octeon_temp_buffer, - data); - if (usb_urb_dir_in(urb)) { - if (usb_pipeisoc(urb->pipe)) - length = urb->transfer_buffer_length; - else - length = urb->actual_length; - - memcpy(temp->orig_buffer, urb->transfer_buffer, length); - } - urb->transfer_buffer = temp->orig_buffer; - urb->transfer_flags &= ~URB_ALIGNED_TEMP_BUFFER; - kfree(temp); -} - -/** - * octeon_map_urb_for_dma - Octeon-specific map_urb_for_dma(). - * @hcd: USB HCD structure. - * @urb: URB. - * @mem_flags: Memory allocation flags. - */ -static int octeon_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, - gfp_t mem_flags) -{ - int ret; - - ret = octeon_alloc_temp_buffer(urb, mem_flags); - if (ret) - return ret; - - ret = usb_hcd_map_urb_for_dma(hcd, urb, mem_flags); - if (ret) - octeon_free_temp_buffer(urb); - - return ret; -} - -/** - * octeon_unmap_urb_for_dma - Octeon-specific unmap_urb_for_dma() - * @hcd: USB HCD structure. - * @urb: URB. - */ -static void octeon_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb) -{ - usb_hcd_unmap_urb_for_dma(hcd, urb); - octeon_free_temp_buffer(urb); -} - -/** - * Read a USB 32bit CSR. It performs the necessary address swizzle - * for 32bit CSRs and logs the value in a readable format if - * debugging is on. - * - * @usb: USB block this access is for - * @address: 64bit address to read - * - * Returns: Result of the read - */ -static inline u32 cvmx_usb_read_csr32(struct octeon_hcd *usb, u64 address) -{ - return cvmx_read64_uint32(address ^ 4); -} - -/** - * Write a USB 32bit CSR. It performs the necessary address - * swizzle for 32bit CSRs and logs the value in a readable format - * if debugging is on. - * - * @usb: USB block this access is for - * @address: 64bit address to write - * @value: Value to write - */ -static inline void cvmx_usb_write_csr32(struct octeon_hcd *usb, - u64 address, u32 value) -{ - cvmx_write64_uint32(address ^ 4, value); - cvmx_read64_uint64(CVMX_USBNX_DMA0_INB_CHN0(usb->index)); -} - -/** - * Return non zero if this pipe connects to a non HIGH speed - * device through a high speed hub. - * - * @usb: USB block this access is for - * @pipe: Pipe to check - * - * Returns: Non zero if we need to do split transactions - */ -static inline int cvmx_usb_pipe_needs_split(struct octeon_hcd *usb, - struct cvmx_usb_pipe *pipe) -{ - return pipe->device_speed != CVMX_USB_SPEED_HIGH && - usb->usbcx_hprt.s.prtspd == CVMX_USB_SPEED_HIGH; -} - -/** - * Trivial utility function to return the correct PID for a pipe - * - * @pipe: pipe to check - * - * Returns: PID for pipe - */ -static inline int cvmx_usb_get_data_pid(struct cvmx_usb_pipe *pipe) -{ - if (pipe->pid_toggle) - return 2; /* Data1 */ - return 0; /* Data0 */ -} - -/* Loops through register until txfflsh or rxfflsh become zero.*/ -static int cvmx_wait_tx_rx(struct octeon_hcd *usb, int fflsh_type) -{ - int result; - u64 address = CVMX_USBCX_GRSTCTL(usb->index); - u64 done = cvmx_get_cycle() + 100 * - (u64)octeon_get_clock_rate / 1000000; - union cvmx_usbcx_grstctl c; - - while (1) { - c.u32 = cvmx_usb_read_csr32(usb, address); - if (fflsh_type == 0 && c.s.txfflsh == 0) { - result = 0; - break; - } else if (fflsh_type == 1 && c.s.rxfflsh == 0) { - result = 0; - break; - } else if (cvmx_get_cycle() > done) { - result = -1; - break; - } - - __delay(100); - } - return result; -} - -static void cvmx_fifo_setup(struct octeon_hcd *usb) -{ - union cvmx_usbcx_ghwcfg3 usbcx_ghwcfg3; - union cvmx_usbcx_gnptxfsiz npsiz; - union cvmx_usbcx_hptxfsiz psiz; - - usbcx_ghwcfg3.u32 = cvmx_usb_read_csr32(usb, - CVMX_USBCX_GHWCFG3(usb->index)); - - /* - * Program the USBC_GRXFSIZ register to select the size of the receive - * FIFO (25%). - */ - USB_SET_FIELD32(CVMX_USBCX_GRXFSIZ(usb->index), cvmx_usbcx_grxfsiz, - rxfdep, usbcx_ghwcfg3.s.dfifodepth / 4); - - /* - * Program the USBC_GNPTXFSIZ register to select the size and the start - * address of the non-periodic transmit FIFO for nonperiodic - * transactions (50%). - */ - npsiz.u32 = cvmx_usb_read_csr32(usb, CVMX_USBCX_GNPTXFSIZ(usb->index)); - npsiz.s.nptxfdep = usbcx_ghwcfg3.s.dfifodepth / 2; - npsiz.s.nptxfstaddr = usbcx_ghwcfg3.s.dfifodepth / 4; - cvmx_usb_write_csr32(usb, CVMX_USBCX_GNPTXFSIZ(usb->index), npsiz.u32); - - /* - * Program the USBC_HPTXFSIZ register to select the size and start - * address of the periodic transmit FIFO for periodic transactions - * (25%). - */ - psiz.u32 = cvmx_usb_read_csr32(usb, CVMX_USBCX_HPTXFSIZ(usb->index)); - psiz.s.ptxfsize = usbcx_ghwcfg3.s.dfifodepth / 4; - psiz.s.ptxfstaddr = 3 * usbcx_ghwcfg3.s.dfifodepth / 4; - cvmx_usb_write_csr32(usb, CVMX_USBCX_HPTXFSIZ(usb->index), psiz.u32); - - /* Flush all FIFOs */ - USB_SET_FIELD32(CVMX_USBCX_GRSTCTL(usb->index), - cvmx_usbcx_grstctl, txfnum, 0x10); - USB_SET_FIELD32(CVMX_USBCX_GRSTCTL(usb->index), - cvmx_usbcx_grstctl, txfflsh, 1); - cvmx_wait_tx_rx(usb, 0); - USB_SET_FIELD32(CVMX_USBCX_GRSTCTL(usb->index), - cvmx_usbcx_grstctl, rxfflsh, 1); - cvmx_wait_tx_rx(usb, 1); -} - -/** - * Shutdown a USB port after a call to cvmx_usb_initialize(). - * The port should be disabled with all pipes closed when this - * function is called. - * - * @usb: USB device state populated by cvmx_usb_initialize(). - * - * Returns: 0 or a negative error code. - */ -static int cvmx_usb_shutdown(struct octeon_hcd *usb) -{ - union cvmx_usbnx_clk_ctl usbn_clk_ctl; - - /* Make sure all pipes are closed */ - if (!list_empty(&usb->idle_pipes) || - !list_empty(&usb->active_pipes[CVMX_USB_TRANSFER_ISOCHRONOUS]) || - !list_empty(&usb->active_pipes[CVMX_USB_TRANSFER_INTERRUPT]) || - !list_empty(&usb->active_pipes[CVMX_USB_TRANSFER_CONTROL]) || - !list_empty(&usb->active_pipes[CVMX_USB_TRANSFER_BULK])) - return -EBUSY; - - /* Disable the clocks and put them in power on reset */ - usbn_clk_ctl.u64 = cvmx_read64_uint64(CVMX_USBNX_CLK_CTL(usb->index)); - usbn_clk_ctl.s.enable = 1; - usbn_clk_ctl.s.por = 1; - usbn_clk_ctl.s.hclk_rst = 1; - usbn_clk_ctl.s.prst = 0; - usbn_clk_ctl.s.hrst = 0; - cvmx_write64_uint64(CVMX_USBNX_CLK_CTL(usb->index), usbn_clk_ctl.u64); - return 0; -} - -/** - * Initialize a USB port for use. This must be called before any - * other access to the Octeon USB port is made. The port starts - * off in the disabled state. - * - * @dev: Pointer to struct device for logging purposes. - * @usb: Pointer to struct octeon_hcd. - * - * Returns: 0 or a negative error code. - */ -static int cvmx_usb_initialize(struct device *dev, - struct octeon_hcd *usb) -{ - int channel; - int divisor; - int retries = 0; - union cvmx_usbcx_hcfg usbcx_hcfg; - union cvmx_usbnx_clk_ctl usbn_clk_ctl; - union cvmx_usbcx_gintsts usbc_gintsts; - union cvmx_usbcx_gahbcfg usbcx_gahbcfg; - union cvmx_usbcx_gintmsk usbcx_gintmsk; - union cvmx_usbcx_gusbcfg usbcx_gusbcfg; - union cvmx_usbnx_usbp_ctl_status usbn_usbp_ctl_status; - -retry: - /* - * Power On Reset and PHY Initialization - * - * 1. Wait for DCOK to assert (nothing to do) - * - * 2a. Write USBN0/1_CLK_CTL[POR] = 1 and - * USBN0/1_CLK_CTL[HRST,PRST,HCLK_RST] = 0 - */ - usbn_clk_ctl.u64 = cvmx_read64_uint64(CVMX_USBNX_CLK_CTL(usb->index)); - usbn_clk_ctl.s.por = 1; - usbn_clk_ctl.s.hrst = 0; - usbn_clk_ctl.s.prst = 0; - usbn_clk_ctl.s.hclk_rst = 0; - usbn_clk_ctl.s.enable = 0; - /* - * 2b. Select the USB reference clock/crystal parameters by writing - * appropriate values to USBN0/1_CLK_CTL[P_C_SEL, P_RTYPE, P_COM_ON] - */ - if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND) { - /* - * The USB port uses 12/24/48MHz 2.5V board clock - * source at USB_XO. USB_XI should be tied to GND. - * Most Octeon evaluation boards require this setting - */ - if (OCTEON_IS_MODEL(OCTEON_CN3XXX) || - OCTEON_IS_MODEL(OCTEON_CN56XX) || - OCTEON_IS_MODEL(OCTEON_CN50XX)) - /* From CN56XX,CN50XX,CN31XX,CN30XX manuals */ - usbn_clk_ctl.s.p_rtype = 2; /* p_rclk=1 & p_xenbn=0 */ - else - /* From CN52XX manual */ - usbn_clk_ctl.s.p_rtype = 1; - - switch (usb->init_flags & - CVMX_USB_INITIALIZE_FLAGS_CLOCK_MHZ_MASK) { - case CVMX_USB_INITIALIZE_FLAGS_CLOCK_12MHZ: - usbn_clk_ctl.s.p_c_sel = 0; - break; - case CVMX_USB_INITIALIZE_FLAGS_CLOCK_24MHZ: - usbn_clk_ctl.s.p_c_sel = 1; - break; - case CVMX_USB_INITIALIZE_FLAGS_CLOCK_48MHZ: - usbn_clk_ctl.s.p_c_sel = 2; - break; - } - } else { - /* - * The USB port uses a 12MHz crystal as clock source - * at USB_XO and USB_XI - */ - if (OCTEON_IS_MODEL(OCTEON_CN3XXX)) - /* From CN31XX,CN30XX manual */ - usbn_clk_ctl.s.p_rtype = 3; /* p_rclk=1 & p_xenbn=1 */ - else - /* From CN56XX,CN52XX,CN50XX manuals. */ - usbn_clk_ctl.s.p_rtype = 0; - - usbn_clk_ctl.s.p_c_sel = 0; - } - /* - * 2c. Select the HCLK via writing USBN0/1_CLK_CTL[DIVIDE, DIVIDE2] and - * setting USBN0/1_CLK_CTL[ENABLE] = 1. Divide the core clock down - * such that USB is as close as possible to 125Mhz - */ - divisor = DIV_ROUND_UP(octeon_get_clock_rate(), 125000000); - /* Lower than 4 doesn't seem to work properly */ - if (divisor < 4) - divisor = 4; - usbn_clk_ctl.s.divide = divisor; - usbn_clk_ctl.s.divide2 = 0; - cvmx_write64_uint64(CVMX_USBNX_CLK_CTL(usb->index), usbn_clk_ctl.u64); - - /* 2d. Write USBN0/1_CLK_CTL[HCLK_RST] = 1 */ - usbn_clk_ctl.s.hclk_rst = 1; - cvmx_write64_uint64(CVMX_USBNX_CLK_CTL(usb->index), usbn_clk_ctl.u64); - /* 2e. Wait 64 core-clock cycles for HCLK to stabilize */ - __delay(64); - /* - * 3. Program the power-on reset field in the USBN clock-control - * register: - * USBN_CLK_CTL[POR] = 0 - */ - usbn_clk_ctl.s.por = 0; - cvmx_write64_uint64(CVMX_USBNX_CLK_CTL(usb->index), usbn_clk_ctl.u64); - /* 4. Wait 1 ms for PHY clock to start */ - mdelay(1); - /* - * 5. Program the Reset input from automatic test equipment field in the - * USBP control and status register: - * USBN_USBP_CTL_STATUS[ATE_RESET] = 1 - */ - usbn_usbp_ctl_status.u64 = - cvmx_read64_uint64(CVMX_USBNX_USBP_CTL_STATUS(usb->index)); - usbn_usbp_ctl_status.s.ate_reset = 1; - cvmx_write64_uint64(CVMX_USBNX_USBP_CTL_STATUS(usb->index), - usbn_usbp_ctl_status.u64); - /* 6. Wait 10 cycles */ - __delay(10); - /* - * 7. Clear ATE_RESET field in the USBN clock-control register: - * USBN_USBP_CTL_STATUS[ATE_RESET] = 0 - */ - usbn_usbp_ctl_status.s.ate_reset = 0; - cvmx_write64_uint64(CVMX_USBNX_USBP_CTL_STATUS(usb->index), - usbn_usbp_ctl_status.u64); - /* - * 8. Program the PHY reset field in the USBN clock-control register: - * USBN_CLK_CTL[PRST] = 1 - */ - usbn_clk_ctl.s.prst = 1; - cvmx_write64_uint64(CVMX_USBNX_CLK_CTL(usb->index), usbn_clk_ctl.u64); - /* - * 9. Program the USBP control and status register to select host or - * device mode. USBN_USBP_CTL_STATUS[HST_MODE] = 0 for host, = 1 for - * device - */ - usbn_usbp_ctl_status.s.hst_mode = 0; - cvmx_write64_uint64(CVMX_USBNX_USBP_CTL_STATUS(usb->index), - usbn_usbp_ctl_status.u64); - /* 10. Wait 1 us */ - udelay(1); - /* - * 11. Program the hreset_n field in the USBN clock-control register: - * USBN_CLK_CTL[HRST] = 1 - */ - usbn_clk_ctl.s.hrst = 1; - cvmx_write64_uint64(CVMX_USBNX_CLK_CTL(usb->index), usbn_clk_ctl.u64); - /* 12. Proceed to USB core initialization */ - usbn_clk_ctl.s.enable = 1; - cvmx_write64_uint64(CVMX_USBNX_CLK_CTL(usb->index), usbn_clk_ctl.u64); - udelay(1); - - /* - * USB Core Initialization - * - * 1. Read USBC_GHWCFG1, USBC_GHWCFG2, USBC_GHWCFG3, USBC_GHWCFG4 to - * determine USB core configuration parameters. - * - * Nothing needed - * - * 2. Program the following fields in the global AHB configuration - * register (USBC_GAHBCFG) - * DMA mode, USBC_GAHBCFG[DMAEn]: 1 = DMA mode, 0 = slave mode - * Burst length, USBC_GAHBCFG[HBSTLEN] = 0 - * Nonperiodic TxFIFO empty level (slave mode only), - * USBC_GAHBCFG[NPTXFEMPLVL] - * Periodic TxFIFO empty level (slave mode only), - * USBC_GAHBCFG[PTXFEMPLVL] - * Global interrupt mask, USBC_GAHBCFG[GLBLINTRMSK] = 1 - */ - usbcx_gahbcfg.u32 = 0; - usbcx_gahbcfg.s.dmaen = !(usb->init_flags & - CVMX_USB_INITIALIZE_FLAGS_NO_DMA); - usbcx_gahbcfg.s.hbstlen = 0; - usbcx_gahbcfg.s.nptxfemplvl = 1; - usbcx_gahbcfg.s.ptxfemplvl = 1; - usbcx_gahbcfg.s.glblintrmsk = 1; - cvmx_usb_write_csr32(usb, CVMX_USBCX_GAHBCFG(usb->index), - usbcx_gahbcfg.u32); - - /* - * 3. Program the following fields in USBC_GUSBCFG register. - * HS/FS timeout calibration, USBC_GUSBCFG[TOUTCAL] = 0 - * ULPI DDR select, USBC_GUSBCFG[DDRSEL] = 0 - * USB turnaround time, USBC_GUSBCFG[USBTRDTIM] = 0x5 - * PHY low-power clock select, USBC_GUSBCFG[PHYLPWRCLKSEL] = 0 - */ - usbcx_gusbcfg.u32 = cvmx_usb_read_csr32(usb, - CVMX_USBCX_GUSBCFG(usb->index)); - usbcx_gusbcfg.s.toutcal = 0; - usbcx_gusbcfg.s.ddrsel = 0; - usbcx_gusbcfg.s.usbtrdtim = 0x5; - usbcx_gusbcfg.s.phylpwrclksel = 0; - cvmx_usb_write_csr32(usb, CVMX_USBCX_GUSBCFG(usb->index), - usbcx_gusbcfg.u32); - - /* - * 4. The software must unmask the following bits in the USBC_GINTMSK - * register. - * OTG interrupt mask, USBC_GINTMSK[OTGINTMSK] = 1 - * Mode mismatch interrupt mask, USBC_GINTMSK[MODEMISMSK] = 1 - */ - usbcx_gintmsk.u32 = cvmx_usb_read_csr32(usb, - CVMX_USBCX_GINTMSK(usb->index)); - usbcx_gintmsk.s.otgintmsk = 1; - usbcx_gintmsk.s.modemismsk = 1; - usbcx_gintmsk.s.hchintmsk = 1; - usbcx_gintmsk.s.sofmsk = 0; - /* We need RX FIFO interrupts if we don't have DMA */ - if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) - usbcx_gintmsk.s.rxflvlmsk = 1; - cvmx_usb_write_csr32(usb, CVMX_USBCX_GINTMSK(usb->index), - usbcx_gintmsk.u32); - - /* - * Disable all channel interrupts. We'll enable them per channel later. - */ - for (channel = 0; channel < 8; channel++) - cvmx_usb_write_csr32(usb, - CVMX_USBCX_HCINTMSKX(channel, usb->index), - 0); - - /* - * Host Port Initialization - * - * 1. Program the host-port interrupt-mask field to unmask, - * USBC_GINTMSK[PRTINT] = 1 - */ - USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), - cvmx_usbcx_gintmsk, prtintmsk, 1); - USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), - cvmx_usbcx_gintmsk, disconnintmsk, 1); - - /* - * 2. Program the USBC_HCFG register to select full-speed host - * or high-speed host. - */ - usbcx_hcfg.u32 = cvmx_usb_read_csr32(usb, CVMX_USBCX_HCFG(usb->index)); - usbcx_hcfg.s.fslssupp = 0; - usbcx_hcfg.s.fslspclksel = 0; - cvmx_usb_write_csr32(usb, CVMX_USBCX_HCFG(usb->index), usbcx_hcfg.u32); - - cvmx_fifo_setup(usb); - - /* - * If the controller is getting port events right after the reset, it - * means the initialization failed. Try resetting the controller again - * in such case. This is seen to happen after cold boot on DSR-1000N. - */ - usbc_gintsts.u32 = cvmx_usb_read_csr32(usb, - CVMX_USBCX_GINTSTS(usb->index)); - cvmx_usb_write_csr32(usb, CVMX_USBCX_GINTSTS(usb->index), - usbc_gintsts.u32); - dev_dbg(dev, "gintsts after reset: 0x%x\n", (int)usbc_gintsts.u32); - if (!usbc_gintsts.s.disconnint && !usbc_gintsts.s.prtint) - return 0; - if (retries++ >= 5) - return -EAGAIN; - dev_info(dev, "controller reset failed (gintsts=0x%x) - retrying\n", - (int)usbc_gintsts.u32); - msleep(50); - cvmx_usb_shutdown(usb); - msleep(50); - goto retry; -} - -/** - * Reset a USB port. After this call succeeds, the USB port is - * online and servicing requests. - * - * @usb: USB device state populated by cvmx_usb_initialize(). - */ -static void cvmx_usb_reset_port(struct octeon_hcd *usb) -{ - usb->usbcx_hprt.u32 = cvmx_usb_read_csr32(usb, - CVMX_USBCX_HPRT(usb->index)); - - /* Program the port reset bit to start the reset process */ - USB_SET_FIELD32(CVMX_USBCX_HPRT(usb->index), cvmx_usbcx_hprt, - prtrst, 1); - - /* - * Wait at least 50ms (high speed), or 10ms (full speed) for the reset - * process to complete. - */ - mdelay(50); - - /* Program the port reset bit to 0, USBC_HPRT[PRTRST] = 0 */ - USB_SET_FIELD32(CVMX_USBCX_HPRT(usb->index), cvmx_usbcx_hprt, - prtrst, 0); - - /* - * Read the port speed field to get the enumerated speed, - * USBC_HPRT[PRTSPD]. - */ - usb->usbcx_hprt.u32 = cvmx_usb_read_csr32(usb, - CVMX_USBCX_HPRT(usb->index)); -} - -/** - * Disable a USB port. After this call the USB port will not - * generate data transfers and will not generate events. - * Transactions in process will fail and call their - * associated callbacks. - * - * @usb: USB device state populated by cvmx_usb_initialize(). - * - * Returns: 0 or a negative error code. - */ -static int cvmx_usb_disable(struct octeon_hcd *usb) -{ - /* Disable the port */ - USB_SET_FIELD32(CVMX_USBCX_HPRT(usb->index), cvmx_usbcx_hprt, - prtena, 1); - return 0; -} - -/** - * Get the current state of the USB port. Use this call to - * determine if the usb port has anything connected, is enabled, - * or has some sort of error condition. The return value of this - * call has "changed" bits to signal of the value of some fields - * have changed between calls. - * - * @usb: USB device state populated by cvmx_usb_initialize(). - * - * Returns: Port status information - */ -static struct cvmx_usb_port_status cvmx_usb_get_status(struct octeon_hcd *usb) -{ - union cvmx_usbcx_hprt usbc_hprt; - struct cvmx_usb_port_status result; - - memset(&result, 0, sizeof(result)); - - usbc_hprt.u32 = cvmx_usb_read_csr32(usb, CVMX_USBCX_HPRT(usb->index)); - result.port_enabled = usbc_hprt.s.prtena; - result.port_over_current = usbc_hprt.s.prtovrcurract; - result.port_powered = usbc_hprt.s.prtpwr; - result.port_speed = usbc_hprt.s.prtspd; - result.connected = usbc_hprt.s.prtconnsts; - result.connect_change = - result.connected != usb->port_status.connected; - - return result; -} - -/** - * Open a virtual pipe between the host and a USB device. A pipe - * must be opened before data can be transferred between a device - * and Octeon. - * - * @usb: USB device state populated by cvmx_usb_initialize(). - * @device_addr: - * USB device address to open the pipe to - * (0-127). - * @endpoint_num: - * USB endpoint number to open the pipe to - * (0-15). - * @device_speed: - * The speed of the device the pipe is going - * to. This must match the device's speed, - * which may be different than the port speed. - * @max_packet: The maximum packet length the device can - * transmit/receive (low speed=0-8, full - * speed=0-1023, high speed=0-1024). This value - * comes from the standard endpoint descriptor - * field wMaxPacketSize bits <10:0>. - * @transfer_type: - * The type of transfer this pipe is for. - * @transfer_dir: - * The direction the pipe is in. This is not - * used for control pipes. - * @interval: For ISOCHRONOUS and INTERRUPT transfers, - * this is how often the transfer is scheduled - * for. All other transfers should specify - * zero. The units are in frames (8000/sec at - * high speed, 1000/sec for full speed). - * @multi_count: - * For high speed devices, this is the maximum - * allowed number of packet per microframe. - * Specify zero for non high speed devices. This - * value comes from the standard endpoint descriptor - * field wMaxPacketSize bits <12:11>. - * @hub_device_addr: - * Hub device address this device is connected - * to. Devices connected directly to Octeon - * use zero. This is only used when the device - * is full/low speed behind a high speed hub. - * The address will be of the high speed hub, - * not and full speed hubs after it. - * @hub_port: Which port on the hub the device is - * connected. Use zero for devices connected - * directly to Octeon. Like hub_device_addr, - * this is only used for full/low speed - * devices behind a high speed hub. - * - * Returns: A non-NULL value is a pipe. NULL means an error. - */ -static struct cvmx_usb_pipe *cvmx_usb_open_pipe(struct octeon_hcd *usb, - int device_addr, - int endpoint_num, - enum cvmx_usb_speed - device_speed, - int max_packet, - enum cvmx_usb_transfer - transfer_type, - enum cvmx_usb_direction - transfer_dir, - int interval, int multi_count, - int hub_device_addr, - int hub_port) -{ - struct cvmx_usb_pipe *pipe; - - pipe = kzalloc(sizeof(*pipe), GFP_ATOMIC); - if (!pipe) - return NULL; - if ((device_speed == CVMX_USB_SPEED_HIGH) && - (transfer_dir == CVMX_USB_DIRECTION_OUT) && - (transfer_type == CVMX_USB_TRANSFER_BULK)) - pipe->flags |= CVMX_USB_PIPE_FLAGS_NEED_PING; - pipe->device_addr = device_addr; - pipe->endpoint_num = endpoint_num; - pipe->device_speed = device_speed; - pipe->max_packet = max_packet; - pipe->transfer_type = transfer_type; - pipe->transfer_dir = transfer_dir; - INIT_LIST_HEAD(&pipe->transactions); - - /* - * All pipes use interval to rate limit NAK processing. Force an - * interval if one wasn't supplied - */ - if (!interval) - interval = 1; - if (cvmx_usb_pipe_needs_split(usb, pipe)) { - pipe->interval = interval * 8; - /* Force start splits to be schedule on uFrame 0 */ - pipe->next_tx_frame = ((usb->frame_number + 7) & ~7) + - pipe->interval; - } else { - pipe->interval = interval; - pipe->next_tx_frame = usb->frame_number + pipe->interval; - } - pipe->multi_count = multi_count; - pipe->hub_device_addr = hub_device_addr; - pipe->hub_port = hub_port; - pipe->pid_toggle = 0; - pipe->split_sc_frame = -1; - list_add_tail(&pipe->node, &usb->idle_pipes); - - /* - * We don't need to tell the hardware about this pipe yet since - * it doesn't have any submitted requests - */ - - return pipe; -} - -/** - * Poll the RX FIFOs and remove data as needed. This function is only used - * in non DMA mode. It is very important that this function be called quickly - * enough to prevent FIFO overflow. - * - * @usb: USB device state populated by cvmx_usb_initialize(). - */ -static void cvmx_usb_poll_rx_fifo(struct octeon_hcd *usb) -{ - union cvmx_usbcx_grxstsph rx_status; - int channel; - int bytes; - u64 address; - u32 *ptr; - - rx_status.u32 = cvmx_usb_read_csr32(usb, - CVMX_USBCX_GRXSTSPH(usb->index)); - /* Only read data if IN data is there */ - if (rx_status.s.pktsts != 2) - return; - /* Check if no data is available */ - if (!rx_status.s.bcnt) - return; - - channel = rx_status.s.chnum; - bytes = rx_status.s.bcnt; - if (!bytes) - return; - - /* Get where the DMA engine would have written this data */ - address = cvmx_read64_uint64(CVMX_USBNX_DMA0_INB_CHN0(usb->index) + - channel * 8); - - ptr = cvmx_phys_to_ptr(address); - cvmx_write64_uint64(CVMX_USBNX_DMA0_INB_CHN0(usb->index) + channel * 8, - address + bytes); - - /* Loop writing the FIFO data for this packet into memory */ - while (bytes > 0) { - *ptr++ = cvmx_usb_read_csr32(usb, - USB_FIFO_ADDRESS(channel, usb->index)); - bytes -= 4; - } - CVMX_SYNCW; -} - -/** - * Fill the TX hardware fifo with data out of the software - * fifos - * - * @usb: USB device state populated by cvmx_usb_initialize(). - * @fifo: Software fifo to use - * @available: Amount of space in the hardware fifo - * - * Returns: Non zero if the hardware fifo was too small and needs - * to be serviced again. - */ -static int cvmx_usb_fill_tx_hw(struct octeon_hcd *usb, - struct cvmx_usb_tx_fifo *fifo, int available) -{ - /* - * We're done either when there isn't anymore space or the software FIFO - * is empty - */ - while (available && (fifo->head != fifo->tail)) { - int i = fifo->tail; - const u32 *ptr = cvmx_phys_to_ptr(fifo->entry[i].address); - u64 csr_address = USB_FIFO_ADDRESS(fifo->entry[i].channel, - usb->index) ^ 4; - int words = available; - - /* Limit the amount of data to what the SW fifo has */ - if (fifo->entry[i].size <= available) { - words = fifo->entry[i].size; - fifo->tail++; - if (fifo->tail > MAX_CHANNELS) - fifo->tail = 0; - } - - /* Update the next locations and counts */ - available -= words; - fifo->entry[i].address += words * 4; - fifo->entry[i].size -= words; - - /* - * Write the HW fifo data. The read every three writes is due - * to an errata on CN3XXX chips - */ - while (words > 3) { - cvmx_write64_uint32(csr_address, *ptr++); - cvmx_write64_uint32(csr_address, *ptr++); - cvmx_write64_uint32(csr_address, *ptr++); - cvmx_read64_uint64(CVMX_USBNX_DMA0_INB_CHN0(usb->index)); - words -= 3; - } - cvmx_write64_uint32(csr_address, *ptr++); - if (--words) { - cvmx_write64_uint32(csr_address, *ptr++); - if (--words) - cvmx_write64_uint32(csr_address, *ptr++); - } - cvmx_read64_uint64(CVMX_USBNX_DMA0_INB_CHN0(usb->index)); - } - return fifo->head != fifo->tail; -} - -/** - * Check the hardware FIFOs and fill them as needed - * - * @usb: USB device state populated by cvmx_usb_initialize(). - */ -static void cvmx_usb_poll_tx_fifo(struct octeon_hcd *usb) -{ - if (usb->periodic.head != usb->periodic.tail) { - union cvmx_usbcx_hptxsts tx_status; - - tx_status.u32 = cvmx_usb_read_csr32(usb, - CVMX_USBCX_HPTXSTS(usb->index)); - if (cvmx_usb_fill_tx_hw(usb, &usb->periodic, - tx_status.s.ptxfspcavail)) - USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), - cvmx_usbcx_gintmsk, ptxfempmsk, 1); - else - USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), - cvmx_usbcx_gintmsk, ptxfempmsk, 0); - } - - if (usb->nonperiodic.head != usb->nonperiodic.tail) { - union cvmx_usbcx_gnptxsts tx_status; - - tx_status.u32 = cvmx_usb_read_csr32(usb, - CVMX_USBCX_GNPTXSTS(usb->index)); - if (cvmx_usb_fill_tx_hw(usb, &usb->nonperiodic, - tx_status.s.nptxfspcavail)) - USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), - cvmx_usbcx_gintmsk, nptxfempmsk, 1); - else - USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), - cvmx_usbcx_gintmsk, nptxfempmsk, 0); - } -} - -/** - * Fill the TX FIFO with an outgoing packet - * - * @usb: USB device state populated by cvmx_usb_initialize(). - * @channel: Channel number to get packet from - */ -static void cvmx_usb_fill_tx_fifo(struct octeon_hcd *usb, int channel) -{ - union cvmx_usbcx_hccharx hcchar; - union cvmx_usbcx_hcspltx usbc_hcsplt; - union cvmx_usbcx_hctsizx usbc_hctsiz; - struct cvmx_usb_tx_fifo *fifo; - - /* We only need to fill data on outbound channels */ - hcchar.u32 = cvmx_usb_read_csr32(usb, - CVMX_USBCX_HCCHARX(channel, usb->index)); - if (hcchar.s.epdir != CVMX_USB_DIRECTION_OUT) - return; - - /* OUT Splits only have data on the start and not the complete */ - usbc_hcsplt.u32 = cvmx_usb_read_csr32(usb, - CVMX_USBCX_HCSPLTX(channel, usb->index)); - if (usbc_hcsplt.s.spltena && usbc_hcsplt.s.compsplt) - return; - - /* - * Find out how many bytes we need to fill and convert it into 32bit - * words. - */ - usbc_hctsiz.u32 = cvmx_usb_read_csr32(usb, - CVMX_USBCX_HCTSIZX(channel, usb->index)); - if (!usbc_hctsiz.s.xfersize) - return; - - if ((hcchar.s.eptype == CVMX_USB_TRANSFER_INTERRUPT) || - (hcchar.s.eptype == CVMX_USB_TRANSFER_ISOCHRONOUS)) - fifo = &usb->periodic; - else - fifo = &usb->nonperiodic; - - fifo->entry[fifo->head].channel = channel; - fifo->entry[fifo->head].address = - cvmx_read64_uint64(CVMX_USBNX_DMA0_OUTB_CHN0(usb->index) + - channel * 8); - fifo->entry[fifo->head].size = (usbc_hctsiz.s.xfersize + 3) >> 2; - fifo->head++; - if (fifo->head > MAX_CHANNELS) - fifo->head = 0; - - cvmx_usb_poll_tx_fifo(usb); -} - -/** - * Perform channel specific setup for Control transactions. All - * the generic stuff will already have been done in cvmx_usb_start_channel(). - * - * @usb: USB device state populated by cvmx_usb_initialize(). - * @channel: Channel to setup - * @pipe: Pipe for control transaction - */ -static void cvmx_usb_start_channel_control(struct octeon_hcd *usb, - int channel, - struct cvmx_usb_pipe *pipe) -{ - struct usb_hcd *hcd = octeon_to_hcd(usb); - struct device *dev = hcd->self.controller; - struct cvmx_usb_transaction *transaction = - list_first_entry(&pipe->transactions, typeof(*transaction), - node); - struct usb_ctrlrequest *header = - cvmx_phys_to_ptr(transaction->control_header); - int bytes_to_transfer = transaction->buffer_length - - transaction->actual_bytes; - int packets_to_transfer; - union cvmx_usbcx_hctsizx usbc_hctsiz; - - usbc_hctsiz.u32 = cvmx_usb_read_csr32(usb, - CVMX_USBCX_HCTSIZX(channel, usb->index)); - - switch (transaction->stage) { - case CVMX_USB_STAGE_NON_CONTROL: - case CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE: - dev_err(dev, "%s: ERROR - Non control stage\n", __func__); - break; - case CVMX_USB_STAGE_SETUP: - usbc_hctsiz.s.pid = 3; /* Setup */ - bytes_to_transfer = sizeof(*header); - /* All Control operations start with a setup going OUT */ - USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index), - cvmx_usbcx_hccharx, epdir, - CVMX_USB_DIRECTION_OUT); - /* - * Setup send the control header instead of the buffer data. The - * buffer data will be used in the next stage - */ - cvmx_write64_uint64(CVMX_USBNX_DMA0_OUTB_CHN0(usb->index) + - channel * 8, - transaction->control_header); - break; - case CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE: - usbc_hctsiz.s.pid = 3; /* Setup */ - bytes_to_transfer = 0; - /* All Control operations start with a setup going OUT */ - USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index), - cvmx_usbcx_hccharx, epdir, - CVMX_USB_DIRECTION_OUT); - - USB_SET_FIELD32(CVMX_USBCX_HCSPLTX(channel, usb->index), - cvmx_usbcx_hcspltx, compsplt, 1); - break; - case CVMX_USB_STAGE_DATA: - usbc_hctsiz.s.pid = cvmx_usb_get_data_pid(pipe); - if (cvmx_usb_pipe_needs_split(usb, pipe)) { - if (header->bRequestType & USB_DIR_IN) - bytes_to_transfer = 0; - else if (bytes_to_transfer > pipe->max_packet) - bytes_to_transfer = pipe->max_packet; - } - USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index), - cvmx_usbcx_hccharx, epdir, - ((header->bRequestType & USB_DIR_IN) ? - CVMX_USB_DIRECTION_IN : - CVMX_USB_DIRECTION_OUT)); - break; - case CVMX_USB_STAGE_DATA_SPLIT_COMPLETE: - usbc_hctsiz.s.pid = cvmx_usb_get_data_pid(pipe); - if (!(header->bRequestType & USB_DIR_IN)) - bytes_to_transfer = 0; - USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index), - cvmx_usbcx_hccharx, epdir, - ((header->bRequestType & USB_DIR_IN) ? - CVMX_USB_DIRECTION_IN : - CVMX_USB_DIRECTION_OUT)); - USB_SET_FIELD32(CVMX_USBCX_HCSPLTX(channel, usb->index), - cvmx_usbcx_hcspltx, compsplt, 1); - break; - case CVMX_USB_STAGE_STATUS: - usbc_hctsiz.s.pid = cvmx_usb_get_data_pid(pipe); - bytes_to_transfer = 0; - USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index), - cvmx_usbcx_hccharx, epdir, - ((header->bRequestType & USB_DIR_IN) ? - CVMX_USB_DIRECTION_OUT : - CVMX_USB_DIRECTION_IN)); - break; - case CVMX_USB_STAGE_STATUS_SPLIT_COMPLETE: - usbc_hctsiz.s.pid = cvmx_usb_get_data_pid(pipe); - bytes_to_transfer = 0; - USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index), - cvmx_usbcx_hccharx, epdir, - ((header->bRequestType & USB_DIR_IN) ? - CVMX_USB_DIRECTION_OUT : - CVMX_USB_DIRECTION_IN)); - USB_SET_FIELD32(CVMX_USBCX_HCSPLTX(channel, usb->index), - cvmx_usbcx_hcspltx, compsplt, 1); - break; - } - - /* - * Make sure the transfer never exceeds the byte limit of the hardware. - * Further bytes will be sent as continued transactions - */ - if (bytes_to_transfer > MAX_TRANSFER_BYTES) { - /* Round MAX_TRANSFER_BYTES to a multiple of out packet size */ - bytes_to_transfer = MAX_TRANSFER_BYTES / pipe->max_packet; - bytes_to_transfer *= pipe->max_packet; - } - - /* - * Calculate the number of packets to transfer. If the length is zero - * we still need to transfer one packet - */ - packets_to_transfer = DIV_ROUND_UP(bytes_to_transfer, - pipe->max_packet); - if (packets_to_transfer == 0) { - packets_to_transfer = 1; - } else if ((packets_to_transfer > 1) && - (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)) { - /* - * Limit to one packet when not using DMA. Channels must be - * restarted between every packet for IN transactions, so there - * is no reason to do multiple packets in a row - */ - packets_to_transfer = 1; - bytes_to_transfer = packets_to_transfer * pipe->max_packet; - } else if (packets_to_transfer > MAX_TRANSFER_PACKETS) { - /* - * Limit the number of packet and data transferred to what the - * hardware can handle - */ - packets_to_transfer = MAX_TRANSFER_PACKETS; - bytes_to_transfer = packets_to_transfer * pipe->max_packet; - } - - usbc_hctsiz.s.xfersize = bytes_to_transfer; - usbc_hctsiz.s.pktcnt = packets_to_transfer; - - cvmx_usb_write_csr32(usb, CVMX_USBCX_HCTSIZX(channel, usb->index), - usbc_hctsiz.u32); -} - -/** - * Start a channel to perform the pipe's head transaction - * - * @usb: USB device state populated by cvmx_usb_initialize(). - * @channel: Channel to setup - * @pipe: Pipe to start - */ -static void cvmx_usb_start_channel(struct octeon_hcd *usb, int channel, - struct cvmx_usb_pipe *pipe) -{ - struct cvmx_usb_transaction *transaction = - list_first_entry(&pipe->transactions, typeof(*transaction), - node); - - /* Make sure all writes to the DMA region get flushed */ - CVMX_SYNCW; - - /* Attach the channel to the pipe */ - usb->pipe_for_channel[channel] = pipe; - pipe->channel = channel; - pipe->flags |= CVMX_USB_PIPE_FLAGS_SCHEDULED; - - /* Mark this channel as in use */ - usb->idle_hardware_channels &= ~(1 << channel); - - /* Enable the channel interrupt bits */ - { - union cvmx_usbcx_hcintx usbc_hcint; - union cvmx_usbcx_hcintmskx usbc_hcintmsk; - union cvmx_usbcx_haintmsk usbc_haintmsk; - - /* Clear all channel status bits */ - usbc_hcint.u32 = cvmx_usb_read_csr32(usb, - CVMX_USBCX_HCINTX(channel, usb->index)); - - cvmx_usb_write_csr32(usb, - CVMX_USBCX_HCINTX(channel, usb->index), - usbc_hcint.u32); - - usbc_hcintmsk.u32 = 0; - usbc_hcintmsk.s.chhltdmsk = 1; - if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) { - /* - * Channels need these extra interrupts when we aren't - * in DMA mode. - */ - usbc_hcintmsk.s.datatglerrmsk = 1; - usbc_hcintmsk.s.frmovrunmsk = 1; - usbc_hcintmsk.s.bblerrmsk = 1; - usbc_hcintmsk.s.xacterrmsk = 1; - if (cvmx_usb_pipe_needs_split(usb, pipe)) { - /* - * Splits don't generate xfercompl, so we need - * ACK and NYET. - */ - usbc_hcintmsk.s.nyetmsk = 1; - usbc_hcintmsk.s.ackmsk = 1; - } - usbc_hcintmsk.s.nakmsk = 1; - usbc_hcintmsk.s.stallmsk = 1; - usbc_hcintmsk.s.xfercomplmsk = 1; - } - cvmx_usb_write_csr32(usb, - CVMX_USBCX_HCINTMSKX(channel, usb->index), - usbc_hcintmsk.u32); - - /* Enable the channel interrupt to propagate */ - usbc_haintmsk.u32 = cvmx_usb_read_csr32(usb, - CVMX_USBCX_HAINTMSK(usb->index)); - usbc_haintmsk.s.haintmsk |= 1 << channel; - cvmx_usb_write_csr32(usb, CVMX_USBCX_HAINTMSK(usb->index), - usbc_haintmsk.u32); - } - - /* Setup the location the DMA engine uses. */ - { - u64 reg; - u64 dma_address = transaction->buffer + - transaction->actual_bytes; - - if (transaction->type == CVMX_USB_TRANSFER_ISOCHRONOUS) - dma_address = transaction->buffer + - transaction->iso_packets[0].offset + - transaction->actual_bytes; - - if (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT) - reg = CVMX_USBNX_DMA0_OUTB_CHN0(usb->index); - else - reg = CVMX_USBNX_DMA0_INB_CHN0(usb->index); - cvmx_write64_uint64(reg + channel * 8, dma_address); - } - - /* Setup both the size of the transfer and the SPLIT characteristics */ - { - union cvmx_usbcx_hcspltx usbc_hcsplt = {.u32 = 0}; - union cvmx_usbcx_hctsizx usbc_hctsiz = {.u32 = 0}; - int packets_to_transfer; - int bytes_to_transfer = transaction->buffer_length - - transaction->actual_bytes; - - /* - * ISOCHRONOUS transactions store each individual transfer size - * in the packet structure, not the global buffer_length - */ - if (transaction->type == CVMX_USB_TRANSFER_ISOCHRONOUS) - bytes_to_transfer = - transaction->iso_packets[0].length - - transaction->actual_bytes; - - /* - * We need to do split transactions when we are talking to non - * high speed devices that are behind a high speed hub - */ - if (cvmx_usb_pipe_needs_split(usb, pipe)) { - /* - * On the start split phase (stage is even) record the - * frame number we will need to send the split complete. - * We only store the lower two bits since the time ahead - * can only be two frames - */ - if ((transaction->stage & 1) == 0) { - if (transaction->type == CVMX_USB_TRANSFER_BULK) - pipe->split_sc_frame = - (usb->frame_number + 1) & 0x7f; - else - pipe->split_sc_frame = - (usb->frame_number + 2) & 0x7f; - } else { - pipe->split_sc_frame = -1; - } - - usbc_hcsplt.s.spltena = 1; - usbc_hcsplt.s.hubaddr = pipe->hub_device_addr; - usbc_hcsplt.s.prtaddr = pipe->hub_port; - usbc_hcsplt.s.compsplt = (transaction->stage == - CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE); - - /* - * SPLIT transactions can only ever transmit one data - * packet so limit the transfer size to the max packet - * size - */ - if (bytes_to_transfer > pipe->max_packet) - bytes_to_transfer = pipe->max_packet; - - /* - * ISOCHRONOUS OUT splits are unique in that they limit - * data transfers to 188 byte chunks representing the - * begin/middle/end of the data or all - */ - if (!usbc_hcsplt.s.compsplt && - (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT) && - (pipe->transfer_type == - CVMX_USB_TRANSFER_ISOCHRONOUS)) { - /* - * Clear the split complete frame number as - * there isn't going to be a split complete - */ - pipe->split_sc_frame = -1; - /* - * See if we've started this transfer and sent - * data - */ - if (transaction->actual_bytes == 0) { - /* - * Nothing sent yet, this is either a - * begin or the entire payload - */ - if (bytes_to_transfer <= 188) - /* Entire payload in one go */ - usbc_hcsplt.s.xactpos = 3; - else - /* First part of payload */ - usbc_hcsplt.s.xactpos = 2; - } else { - /* - * Continuing the previous data, we must - * either be in the middle or at the end - */ - if (bytes_to_transfer <= 188) - /* End of payload */ - usbc_hcsplt.s.xactpos = 1; - else - /* Middle of payload */ - usbc_hcsplt.s.xactpos = 0; - } - /* - * Again, the transfer size is limited to 188 - * bytes - */ - if (bytes_to_transfer > 188) - bytes_to_transfer = 188; - } - } - - /* - * Make sure the transfer never exceeds the byte limit of the - * hardware. Further bytes will be sent as continued - * transactions - */ - if (bytes_to_transfer > MAX_TRANSFER_BYTES) { - /* - * Round MAX_TRANSFER_BYTES to a multiple of out packet - * size - */ - bytes_to_transfer = MAX_TRANSFER_BYTES / - pipe->max_packet; - bytes_to_transfer *= pipe->max_packet; - } - - /* - * Calculate the number of packets to transfer. If the length is - * zero we still need to transfer one packet - */ - packets_to_transfer = - DIV_ROUND_UP(bytes_to_transfer, pipe->max_packet); - if (packets_to_transfer == 0) { - packets_to_transfer = 1; - } else if ((packets_to_transfer > 1) && - (usb->init_flags & - CVMX_USB_INITIALIZE_FLAGS_NO_DMA)) { - /* - * Limit to one packet when not using DMA. Channels must - * be restarted between every packet for IN - * transactions, so there is no reason to do multiple - * packets in a row - */ - packets_to_transfer = 1; - bytes_to_transfer = packets_to_transfer * - pipe->max_packet; - } else if (packets_to_transfer > MAX_TRANSFER_PACKETS) { - /* - * Limit the number of packet and data transferred to - * what the hardware can handle - */ - packets_to_transfer = MAX_TRANSFER_PACKETS; - bytes_to_transfer = packets_to_transfer * - pipe->max_packet; - } - - usbc_hctsiz.s.xfersize = bytes_to_transfer; - usbc_hctsiz.s.pktcnt = packets_to_transfer; - - /* Update the DATA0/DATA1 toggle */ - usbc_hctsiz.s.pid = cvmx_usb_get_data_pid(pipe); - /* - * High speed pipes may need a hardware ping before they start - */ - if (pipe->flags & CVMX_USB_PIPE_FLAGS_NEED_PING) - usbc_hctsiz.s.dopng = 1; - - cvmx_usb_write_csr32(usb, - CVMX_USBCX_HCSPLTX(channel, usb->index), - usbc_hcsplt.u32); - cvmx_usb_write_csr32(usb, - CVMX_USBCX_HCTSIZX(channel, usb->index), - usbc_hctsiz.u32); - } - - /* Setup the Host Channel Characteristics Register */ - { - union cvmx_usbcx_hccharx usbc_hcchar = {.u32 = 0}; - - /* - * Set the startframe odd/even properly. This is only used for - * periodic - */ - usbc_hcchar.s.oddfrm = usb->frame_number & 1; - - /* - * Set the number of back to back packets allowed by this - * endpoint. Split transactions interpret "ec" as the number of - * immediate retries of failure. These retries happen too - * quickly, so we disable these entirely for splits - */ - if (cvmx_usb_pipe_needs_split(usb, pipe)) - usbc_hcchar.s.ec = 1; - else if (pipe->multi_count < 1) - usbc_hcchar.s.ec = 1; - else if (pipe->multi_count > 3) - usbc_hcchar.s.ec = 3; - else - usbc_hcchar.s.ec = pipe->multi_count; - - /* Set the rest of the endpoint specific settings */ - usbc_hcchar.s.devaddr = pipe->device_addr; - usbc_hcchar.s.eptype = transaction->type; - usbc_hcchar.s.lspddev = - (pipe->device_speed == CVMX_USB_SPEED_LOW); - usbc_hcchar.s.epdir = pipe->transfer_dir; - usbc_hcchar.s.epnum = pipe->endpoint_num; - usbc_hcchar.s.mps = pipe->max_packet; - cvmx_usb_write_csr32(usb, - CVMX_USBCX_HCCHARX(channel, usb->index), - usbc_hcchar.u32); - } - - /* Do transaction type specific fixups as needed */ - switch (transaction->type) { - case CVMX_USB_TRANSFER_CONTROL: - cvmx_usb_start_channel_control(usb, channel, pipe); - break; - case CVMX_USB_TRANSFER_BULK: - case CVMX_USB_TRANSFER_INTERRUPT: - break; - case CVMX_USB_TRANSFER_ISOCHRONOUS: - if (!cvmx_usb_pipe_needs_split(usb, pipe)) { - /* - * ISO transactions require different PIDs depending on - * direction and how many packets are needed - */ - if (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT) { - if (pipe->multi_count < 2) /* Need DATA0 */ - USB_SET_FIELD32( - CVMX_USBCX_HCTSIZX(channel, - usb->index), - cvmx_usbcx_hctsizx, pid, 0); - else /* Need MDATA */ - USB_SET_FIELD32( - CVMX_USBCX_HCTSIZX(channel, - usb->index), - cvmx_usbcx_hctsizx, pid, 3); - } - } - break; - } - { - union cvmx_usbcx_hctsizx usbc_hctsiz = { .u32 = - cvmx_usb_read_csr32(usb, - CVMX_USBCX_HCTSIZX(channel, - usb->index)) - }; - transaction->xfersize = usbc_hctsiz.s.xfersize; - transaction->pktcnt = usbc_hctsiz.s.pktcnt; - } - /* Remember when we start a split transaction */ - if (cvmx_usb_pipe_needs_split(usb, pipe)) - usb->active_split = transaction; - USB_SET_FIELD32(CVMX_USBCX_HCCHARX(channel, usb->index), - cvmx_usbcx_hccharx, chena, 1); - if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) - cvmx_usb_fill_tx_fifo(usb, channel); -} - -/** - * Find a pipe that is ready to be scheduled to hardware. - * @usb: USB device state populated by cvmx_usb_initialize(). - * @xfer_type: Transfer type - * - * Returns: Pipe or NULL if none are ready - */ -static struct cvmx_usb_pipe *cvmx_usb_find_ready_pipe(struct octeon_hcd *usb, - enum cvmx_usb_transfer xfer_type) -{ - struct list_head *list = usb->active_pipes + xfer_type; - u64 current_frame = usb->frame_number; - struct cvmx_usb_pipe *pipe; - - list_for_each_entry(pipe, list, node) { - struct cvmx_usb_transaction *t = - list_first_entry(&pipe->transactions, typeof(*t), - node); - if (!(pipe->flags & CVMX_USB_PIPE_FLAGS_SCHEDULED) && t && - (pipe->next_tx_frame <= current_frame) && - ((pipe->split_sc_frame == -1) || - ((((int)current_frame - pipe->split_sc_frame) & 0x7f) < - 0x40)) && - (!usb->active_split || (usb->active_split == t))) { - prefetch(t); - return pipe; - } - } - return NULL; -} - -static struct cvmx_usb_pipe *cvmx_usb_next_pipe(struct octeon_hcd *usb, - int is_sof) -{ - struct cvmx_usb_pipe *pipe; - - /* Find a pipe needing service. */ - if (is_sof) { - /* - * Only process periodic pipes on SOF interrupts. This way we - * are sure that the periodic data is sent in the beginning of - * the frame. - */ - pipe = cvmx_usb_find_ready_pipe(usb, - CVMX_USB_TRANSFER_ISOCHRONOUS); - if (pipe) - return pipe; - pipe = cvmx_usb_find_ready_pipe(usb, - CVMX_USB_TRANSFER_INTERRUPT); - if (pipe) - return pipe; - } - pipe = cvmx_usb_find_ready_pipe(usb, CVMX_USB_TRANSFER_CONTROL); - if (pipe) - return pipe; - return cvmx_usb_find_ready_pipe(usb, CVMX_USB_TRANSFER_BULK); -} - -/** - * Called whenever a pipe might need to be scheduled to the - * hardware. - * - * @usb: USB device state populated by cvmx_usb_initialize(). - * @is_sof: True if this schedule was called on a SOF interrupt. - */ -static void cvmx_usb_schedule(struct octeon_hcd *usb, int is_sof) -{ - int channel; - struct cvmx_usb_pipe *pipe; - int need_sof; - enum cvmx_usb_transfer ttype; - - if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) { - /* - * Without DMA we need to be careful to not schedule something - * at the end of a frame and cause an overrun. - */ - union cvmx_usbcx_hfnum hfnum = { - .u32 = cvmx_usb_read_csr32(usb, - CVMX_USBCX_HFNUM(usb->index)) - }; - - union cvmx_usbcx_hfir hfir = { - .u32 = cvmx_usb_read_csr32(usb, - CVMX_USBCX_HFIR(usb->index)) - }; - - if (hfnum.s.frrem < hfir.s.frint / 4) - goto done; - } - - while (usb->idle_hardware_channels) { - /* Find an idle channel */ - channel = __fls(usb->idle_hardware_channels); - if (unlikely(channel > 7)) - break; - - pipe = cvmx_usb_next_pipe(usb, is_sof); - if (!pipe) - break; - - cvmx_usb_start_channel(usb, channel, pipe); - } - -done: - /* - * Only enable SOF interrupts when we have transactions pending in the - * future that might need to be scheduled - */ - need_sof = 0; - for (ttype = CVMX_USB_TRANSFER_CONTROL; - ttype <= CVMX_USB_TRANSFER_INTERRUPT; ttype++) { - list_for_each_entry(pipe, &usb->active_pipes[ttype], node) { - if (pipe->next_tx_frame > usb->frame_number) { - need_sof = 1; - break; - } - } - } - USB_SET_FIELD32(CVMX_USBCX_GINTMSK(usb->index), - cvmx_usbcx_gintmsk, sofmsk, need_sof); -} - -static void octeon_usb_urb_complete_callback(struct octeon_hcd *usb, - enum cvmx_usb_status status, - struct cvmx_usb_pipe *pipe, - struct cvmx_usb_transaction - *transaction, - int bytes_transferred, - struct urb *urb) -{ - struct usb_hcd *hcd = octeon_to_hcd(usb); - struct device *dev = hcd->self.controller; - - if (likely(status == CVMX_USB_STATUS_OK)) - urb->actual_length = bytes_transferred; - else - urb->actual_length = 0; - - urb->hcpriv = NULL; - - /* For Isochronous transactions we need to update the URB packet status - * list from data in our private copy - */ - if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { - int i; - /* - * The pointer to the private list is stored in the setup_packet - * field. - */ - struct cvmx_usb_iso_packet *iso_packet = - (struct cvmx_usb_iso_packet *)urb->setup_packet; - /* Recalculate the transfer size by adding up each packet */ - urb->actual_length = 0; - for (i = 0; i < urb->number_of_packets; i++) { - if (iso_packet[i].status == CVMX_USB_STATUS_OK) { - urb->iso_frame_desc[i].status = 0; - urb->iso_frame_desc[i].actual_length = - iso_packet[i].length; - urb->actual_length += - urb->iso_frame_desc[i].actual_length; - } else { - dev_dbg(dev, "ISOCHRONOUS packet=%d of %d status=%d pipe=%p transaction=%p size=%d\n", - i, urb->number_of_packets, - iso_packet[i].status, pipe, - transaction, iso_packet[i].length); - urb->iso_frame_desc[i].status = -EREMOTEIO; - } - } - /* Free the private list now that we don't need it anymore */ - kfree(iso_packet); - urb->setup_packet = NULL; - } - - switch (status) { - case CVMX_USB_STATUS_OK: - urb->status = 0; - break; - case CVMX_USB_STATUS_CANCEL: - if (urb->status == 0) - urb->status = -ENOENT; - break; - case CVMX_USB_STATUS_STALL: - dev_dbg(dev, "status=stall pipe=%p transaction=%p size=%d\n", - pipe, transaction, bytes_transferred); - urb->status = -EPIPE; - break; - case CVMX_USB_STATUS_BABBLEERR: - dev_dbg(dev, "status=babble pipe=%p transaction=%p size=%d\n", - pipe, transaction, bytes_transferred); - urb->status = -EPIPE; - break; - case CVMX_USB_STATUS_SHORT: - dev_dbg(dev, "status=short pipe=%p transaction=%p size=%d\n", - pipe, transaction, bytes_transferred); - urb->status = -EREMOTEIO; - break; - case CVMX_USB_STATUS_ERROR: - case CVMX_USB_STATUS_XACTERR: - case CVMX_USB_STATUS_DATATGLERR: - case CVMX_USB_STATUS_FRAMEERR: - dev_dbg(dev, "status=%d pipe=%p transaction=%p size=%d\n", - status, pipe, transaction, bytes_transferred); - urb->status = -EPROTO; - break; - } - usb_hcd_unlink_urb_from_ep(octeon_to_hcd(usb), urb); - spin_unlock(&usb->lock); - usb_hcd_giveback_urb(octeon_to_hcd(usb), urb, urb->status); - spin_lock(&usb->lock); -} - -/** - * Signal the completion of a transaction and free it. The - * transaction will be removed from the pipe transaction list. - * - * @usb: USB device state populated by cvmx_usb_initialize(). - * @pipe: Pipe the transaction is on - * @transaction: - * Transaction that completed - * @complete_code: - * Completion code - */ -static void cvmx_usb_complete(struct octeon_hcd *usb, - struct cvmx_usb_pipe *pipe, - struct cvmx_usb_transaction *transaction, - enum cvmx_usb_status complete_code) -{ - /* If this was a split then clear our split in progress marker */ - if (usb->active_split == transaction) - usb->active_split = NULL; - - /* - * Isochronous transactions need extra processing as they might not be - * done after a single data transfer - */ - if (unlikely(transaction->type == CVMX_USB_TRANSFER_ISOCHRONOUS)) { - /* Update the number of bytes transferred in this ISO packet */ - transaction->iso_packets[0].length = transaction->actual_bytes; - transaction->iso_packets[0].status = complete_code; - - /* - * If there are more ISOs pending and we succeeded, schedule the - * next one - */ - if ((transaction->iso_number_packets > 1) && - (complete_code == CVMX_USB_STATUS_OK)) { - /* No bytes transferred for this packet as of yet */ - transaction->actual_bytes = 0; - /* One less ISO waiting to transfer */ - transaction->iso_number_packets--; - /* Increment to the next location in our packet array */ - transaction->iso_packets++; - transaction->stage = CVMX_USB_STAGE_NON_CONTROL; - return; - } - } - - /* Remove the transaction from the pipe list */ - list_del(&transaction->node); - if (list_empty(&pipe->transactions)) - list_move_tail(&pipe->node, &usb->idle_pipes); - octeon_usb_urb_complete_callback(usb, complete_code, pipe, - transaction, - transaction->actual_bytes, - transaction->urb); - kfree(transaction); -} - -/** - * Submit a usb transaction to a pipe. Called for all types - * of transactions. - * - * @usb: - * @pipe: Which pipe to submit to. - * @type: Transaction type - * @buffer: User buffer for the transaction - * @buffer_length: - * User buffer's length in bytes - * @control_header: - * For control transactions, the 8 byte standard header - * @iso_start_frame: - * For ISO transactions, the start frame - * @iso_number_packets: - * For ISO, the number of packet in the transaction. - * @iso_packets: - * A description of each ISO packet - * @urb: URB for the callback - * - * Returns: Transaction or NULL on failure. - */ -static struct cvmx_usb_transaction *cvmx_usb_submit_transaction( - struct octeon_hcd *usb, - struct cvmx_usb_pipe *pipe, - enum cvmx_usb_transfer type, - u64 buffer, - int buffer_length, - u64 control_header, - int iso_start_frame, - int iso_number_packets, - struct cvmx_usb_iso_packet *iso_packets, - struct urb *urb) -{ - struct cvmx_usb_transaction *transaction; - - if (unlikely(pipe->transfer_type != type)) - return NULL; - - transaction = kzalloc(sizeof(*transaction), GFP_ATOMIC); - if (unlikely(!transaction)) - return NULL; - - transaction->type = type; - transaction->buffer = buffer; - transaction->buffer_length = buffer_length; - transaction->control_header = control_header; - /* FIXME: This is not used, implement it. */ - transaction->iso_start_frame = iso_start_frame; - transaction->iso_number_packets = iso_number_packets; - transaction->iso_packets = iso_packets; - transaction->urb = urb; - if (transaction->type == CVMX_USB_TRANSFER_CONTROL) - transaction->stage = CVMX_USB_STAGE_SETUP; - else - transaction->stage = CVMX_USB_STAGE_NON_CONTROL; - - if (!list_empty(&pipe->transactions)) { - list_add_tail(&transaction->node, &pipe->transactions); - } else { - list_add_tail(&transaction->node, &pipe->transactions); - list_move_tail(&pipe->node, - &usb->active_pipes[pipe->transfer_type]); - - /* - * We may need to schedule the pipe if this was the head of the - * pipe. - */ - cvmx_usb_schedule(usb, 0); - } - - return transaction; -} - -/** - * Call to submit a USB Bulk transfer to a pipe. - * - * @usb: USB device state populated by cvmx_usb_initialize(). - * @pipe: Handle to the pipe for the transfer. - * @urb: URB. - * - * Returns: A submitted transaction or NULL on failure. - */ -static struct cvmx_usb_transaction *cvmx_usb_submit_bulk( - struct octeon_hcd *usb, - struct cvmx_usb_pipe *pipe, - struct urb *urb) -{ - return cvmx_usb_submit_transaction(usb, pipe, CVMX_USB_TRANSFER_BULK, - urb->transfer_dma, - urb->transfer_buffer_length, - 0, /* control_header */ - 0, /* iso_start_frame */ - 0, /* iso_number_packets */ - NULL, /* iso_packets */ - urb); -} - -/** - * Call to submit a USB Interrupt transfer to a pipe. - * - * @usb: USB device state populated by cvmx_usb_initialize(). - * @pipe: Handle to the pipe for the transfer. - * @urb: URB returned when the callback is called. - * - * Returns: A submitted transaction or NULL on failure. - */ -static struct cvmx_usb_transaction *cvmx_usb_submit_interrupt( - struct octeon_hcd *usb, - struct cvmx_usb_pipe *pipe, - struct urb *urb) -{ - return cvmx_usb_submit_transaction(usb, pipe, - CVMX_USB_TRANSFER_INTERRUPT, - urb->transfer_dma, - urb->transfer_buffer_length, - 0, /* control_header */ - 0, /* iso_start_frame */ - 0, /* iso_number_packets */ - NULL, /* iso_packets */ - urb); -} - -/** - * Call to submit a USB Control transfer to a pipe. - * - * @usb: USB device state populated by cvmx_usb_initialize(). - * @pipe: Handle to the pipe for the transfer. - * @urb: URB. - * - * Returns: A submitted transaction or NULL on failure. - */ -static struct cvmx_usb_transaction *cvmx_usb_submit_control( - struct octeon_hcd *usb, - struct cvmx_usb_pipe *pipe, - struct urb *urb) -{ - int buffer_length = urb->transfer_buffer_length; - u64 control_header = urb->setup_dma; - struct usb_ctrlrequest *header = cvmx_phys_to_ptr(control_header); - - if ((header->bRequestType & USB_DIR_IN) == 0) - buffer_length = le16_to_cpu(header->wLength); - - return cvmx_usb_submit_transaction(usb, pipe, - CVMX_USB_TRANSFER_CONTROL, - urb->transfer_dma, buffer_length, - control_header, - 0, /* iso_start_frame */ - 0, /* iso_number_packets */ - NULL, /* iso_packets */ - urb); -} - -/** - * Call to submit a USB Isochronous transfer to a pipe. - * - * @usb: USB device state populated by cvmx_usb_initialize(). - * @pipe: Handle to the pipe for the transfer. - * @urb: URB returned when the callback is called. - * - * Returns: A submitted transaction or NULL on failure. - */ -static struct cvmx_usb_transaction *cvmx_usb_submit_isochronous( - struct octeon_hcd *usb, - struct cvmx_usb_pipe *pipe, - struct urb *urb) -{ - struct cvmx_usb_iso_packet *packets; - - packets = (struct cvmx_usb_iso_packet *)urb->setup_packet; - return cvmx_usb_submit_transaction(usb, pipe, - CVMX_USB_TRANSFER_ISOCHRONOUS, - urb->transfer_dma, - urb->transfer_buffer_length, - 0, /* control_header */ - urb->start_frame, - urb->number_of_packets, - packets, urb); -} - -/** - * Cancel one outstanding request in a pipe. Canceling a request - * can fail if the transaction has already completed before cancel - * is called. Even after a successful cancel call, it may take - * a frame or two for the cvmx_usb_poll() function to call the - * associated callback. - * - * @usb: USB device state populated by cvmx_usb_initialize(). - * @pipe: Pipe to cancel requests in. - * @transaction: Transaction to cancel, returned by the submit function. - * - * Returns: 0 or a negative error code. - */ -static int cvmx_usb_cancel(struct octeon_hcd *usb, - struct cvmx_usb_pipe *pipe, - struct cvmx_usb_transaction *transaction) -{ - /* - * If the transaction is the HEAD of the queue and scheduled. We need to - * treat it special - */ - if (list_first_entry(&pipe->transactions, typeof(*transaction), node) == - transaction && (pipe->flags & CVMX_USB_PIPE_FLAGS_SCHEDULED)) { - union cvmx_usbcx_hccharx usbc_hcchar; - - usb->pipe_for_channel[pipe->channel] = NULL; - pipe->flags &= ~CVMX_USB_PIPE_FLAGS_SCHEDULED; - - CVMX_SYNCW; - - usbc_hcchar.u32 = cvmx_usb_read_csr32(usb, - CVMX_USBCX_HCCHARX(pipe->channel, - usb->index)); - /* - * If the channel isn't enabled then the transaction already - * completed. - */ - if (usbc_hcchar.s.chena) { - usbc_hcchar.s.chdis = 1; - cvmx_usb_write_csr32(usb, - CVMX_USBCX_HCCHARX(pipe->channel, - usb->index), - usbc_hcchar.u32); - } - } - cvmx_usb_complete(usb, pipe, transaction, CVMX_USB_STATUS_CANCEL); - return 0; -} - -/** - * Cancel all outstanding requests in a pipe. Logically all this - * does is call cvmx_usb_cancel() in a loop. - * - * @usb: USB device state populated by cvmx_usb_initialize(). - * @pipe: Pipe to cancel requests in. - * - * Returns: 0 or a negative error code. - */ -static int cvmx_usb_cancel_all(struct octeon_hcd *usb, - struct cvmx_usb_pipe *pipe) -{ - struct cvmx_usb_transaction *transaction, *next; - - /* Simply loop through and attempt to cancel each transaction */ - list_for_each_entry_safe(transaction, next, &pipe->transactions, node) { - int result = cvmx_usb_cancel(usb, pipe, transaction); - - if (unlikely(result != 0)) - return result; - } - return 0; -} - -/** - * Close a pipe created with cvmx_usb_open_pipe(). - * - * @usb: USB device state populated by cvmx_usb_initialize(). - * @pipe: Pipe to close. - * - * Returns: 0 or a negative error code. EBUSY is returned if the pipe has - * outstanding transfers. - */ -static int cvmx_usb_close_pipe(struct octeon_hcd *usb, - struct cvmx_usb_pipe *pipe) -{ - /* Fail if the pipe has pending transactions */ - if (!list_empty(&pipe->transactions)) - return -EBUSY; - - list_del(&pipe->node); - kfree(pipe); - - return 0; -} - -/** - * Get the current USB protocol level frame number. The frame - * number is always in the range of 0-0x7ff. - * - * @usb: USB device state populated by cvmx_usb_initialize(). - * - * Returns: USB frame number - */ -static int cvmx_usb_get_frame_number(struct octeon_hcd *usb) -{ - union cvmx_usbcx_hfnum usbc_hfnum; - - usbc_hfnum.u32 = cvmx_usb_read_csr32(usb, CVMX_USBCX_HFNUM(usb->index)); - - return usbc_hfnum.s.frnum; -} - -static void cvmx_usb_transfer_control(struct octeon_hcd *usb, - struct cvmx_usb_pipe *pipe, - struct cvmx_usb_transaction *transaction, - union cvmx_usbcx_hccharx usbc_hcchar, - int buffer_space_left, - int bytes_in_last_packet) -{ - switch (transaction->stage) { - case CVMX_USB_STAGE_NON_CONTROL: - case CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE: - /* This should be impossible */ - cvmx_usb_complete(usb, pipe, transaction, - CVMX_USB_STATUS_ERROR); - break; - case CVMX_USB_STAGE_SETUP: - pipe->pid_toggle = 1; - if (cvmx_usb_pipe_needs_split(usb, pipe)) { - transaction->stage = - CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE; - } else { - struct usb_ctrlrequest *header = - cvmx_phys_to_ptr(transaction->control_header); - if (header->wLength) - transaction->stage = CVMX_USB_STAGE_DATA; - else - transaction->stage = CVMX_USB_STAGE_STATUS; - } - break; - case CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE: - { - struct usb_ctrlrequest *header = - cvmx_phys_to_ptr(transaction->control_header); - if (header->wLength) - transaction->stage = CVMX_USB_STAGE_DATA; - else - transaction->stage = CVMX_USB_STAGE_STATUS; - } - break; - case CVMX_USB_STAGE_DATA: - if (cvmx_usb_pipe_needs_split(usb, pipe)) { - transaction->stage = CVMX_USB_STAGE_DATA_SPLIT_COMPLETE; - /* - * For setup OUT data that are splits, - * the hardware doesn't appear to count - * transferred data. Here we manually - * update the data transferred - */ - if (!usbc_hcchar.s.epdir) { - if (buffer_space_left < pipe->max_packet) - transaction->actual_bytes += - buffer_space_left; - else - transaction->actual_bytes += - pipe->max_packet; - } - } else if ((buffer_space_left == 0) || - (bytes_in_last_packet < pipe->max_packet)) { - pipe->pid_toggle = 1; - transaction->stage = CVMX_USB_STAGE_STATUS; - } - break; - case CVMX_USB_STAGE_DATA_SPLIT_COMPLETE: - if ((buffer_space_left == 0) || - (bytes_in_last_packet < pipe->max_packet)) { - pipe->pid_toggle = 1; - transaction->stage = CVMX_USB_STAGE_STATUS; - } else { - transaction->stage = CVMX_USB_STAGE_DATA; - } - break; - case CVMX_USB_STAGE_STATUS: - if (cvmx_usb_pipe_needs_split(usb, pipe)) - transaction->stage = - CVMX_USB_STAGE_STATUS_SPLIT_COMPLETE; - else - cvmx_usb_complete(usb, pipe, transaction, - CVMX_USB_STATUS_OK); - break; - case CVMX_USB_STAGE_STATUS_SPLIT_COMPLETE: - cvmx_usb_complete(usb, pipe, transaction, CVMX_USB_STATUS_OK); - break; - } -} - -static void cvmx_usb_transfer_bulk(struct octeon_hcd *usb, - struct cvmx_usb_pipe *pipe, - struct cvmx_usb_transaction *transaction, - union cvmx_usbcx_hcintx usbc_hcint, - int buffer_space_left, - int bytes_in_last_packet) -{ - /* - * The only time a bulk transfer isn't complete when it finishes with - * an ACK is during a split transaction. For splits we need to continue - * the transfer if more data is needed. - */ - if (cvmx_usb_pipe_needs_split(usb, pipe)) { - if (transaction->stage == CVMX_USB_STAGE_NON_CONTROL) - transaction->stage = - CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE; - else if (buffer_space_left && - (bytes_in_last_packet == pipe->max_packet)) - transaction->stage = CVMX_USB_STAGE_NON_CONTROL; - else - cvmx_usb_complete(usb, pipe, transaction, - CVMX_USB_STATUS_OK); - } else { - if ((pipe->device_speed == CVMX_USB_SPEED_HIGH) && - (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT) && - (usbc_hcint.s.nak)) - pipe->flags |= CVMX_USB_PIPE_FLAGS_NEED_PING; - if (!buffer_space_left || - (bytes_in_last_packet < pipe->max_packet)) - cvmx_usb_complete(usb, pipe, transaction, - CVMX_USB_STATUS_OK); - } -} - -static void cvmx_usb_transfer_intr(struct octeon_hcd *usb, - struct cvmx_usb_pipe *pipe, - struct cvmx_usb_transaction *transaction, - int buffer_space_left, - int bytes_in_last_packet) -{ - if (cvmx_usb_pipe_needs_split(usb, pipe)) { - if (transaction->stage == CVMX_USB_STAGE_NON_CONTROL) { - transaction->stage = - CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE; - } else if (buffer_space_left && - (bytes_in_last_packet == pipe->max_packet)) { - transaction->stage = CVMX_USB_STAGE_NON_CONTROL; - } else { - pipe->next_tx_frame += pipe->interval; - cvmx_usb_complete(usb, pipe, transaction, - CVMX_USB_STATUS_OK); - } - } else if (!buffer_space_left || - (bytes_in_last_packet < pipe->max_packet)) { - pipe->next_tx_frame += pipe->interval; - cvmx_usb_complete(usb, pipe, transaction, CVMX_USB_STATUS_OK); - } -} - -static void cvmx_usb_transfer_isoc(struct octeon_hcd *usb, - struct cvmx_usb_pipe *pipe, - struct cvmx_usb_transaction *transaction, - int buffer_space_left, - int bytes_in_last_packet, - int bytes_this_transfer) -{ - if (cvmx_usb_pipe_needs_split(usb, pipe)) { - /* - * ISOCHRONOUS OUT splits don't require a complete split stage. - * Instead they use a sequence of begin OUT splits to transfer - * the data 188 bytes at a time. Once the transfer is complete, - * the pipe sleeps until the next schedule interval. - */ - if (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT) { - /* - * If no space left or this wasn't a max size packet - * then this transfer is complete. Otherwise start it - * again to send the next 188 bytes - */ - if (!buffer_space_left || (bytes_this_transfer < 188)) { - pipe->next_tx_frame += pipe->interval; - cvmx_usb_complete(usb, pipe, transaction, - CVMX_USB_STATUS_OK); - } - return; - } - if (transaction->stage == - CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE) { - /* - * We are in the incoming data phase. Keep getting data - * until we run out of space or get a small packet - */ - if ((buffer_space_left == 0) || - (bytes_in_last_packet < pipe->max_packet)) { - pipe->next_tx_frame += pipe->interval; - cvmx_usb_complete(usb, pipe, transaction, - CVMX_USB_STATUS_OK); - } - } else { - transaction->stage = - CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE; - } - } else { - pipe->next_tx_frame += pipe->interval; - cvmx_usb_complete(usb, pipe, transaction, CVMX_USB_STATUS_OK); - } -} - -/** - * Poll a channel for status - * - * @usb: USB device - * @channel: Channel to poll - * - * Returns: Zero on success - */ -static int cvmx_usb_poll_channel(struct octeon_hcd *usb, int channel) -{ - struct usb_hcd *hcd = octeon_to_hcd(usb); - struct device *dev = hcd->self.controller; - union cvmx_usbcx_hcintx usbc_hcint; - union cvmx_usbcx_hctsizx usbc_hctsiz; - union cvmx_usbcx_hccharx usbc_hcchar; - struct cvmx_usb_pipe *pipe; - struct cvmx_usb_transaction *transaction; - int bytes_this_transfer; - int bytes_in_last_packet; - int packets_processed; - int buffer_space_left; - - /* Read the interrupt status bits for the channel */ - usbc_hcint.u32 = cvmx_usb_read_csr32(usb, - CVMX_USBCX_HCINTX(channel, usb->index)); - - if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) { - usbc_hcchar.u32 = cvmx_usb_read_csr32(usb, - CVMX_USBCX_HCCHARX(channel, - usb->index)); - - if (usbc_hcchar.s.chena && usbc_hcchar.s.chdis) { - /* - * There seems to be a bug in CN31XX which can cause - * interrupt IN transfers to get stuck until we do a - * write of HCCHARX without changing things - */ - cvmx_usb_write_csr32(usb, - CVMX_USBCX_HCCHARX(channel, - usb->index), - usbc_hcchar.u32); - return 0; - } - - /* - * In non DMA mode the channels don't halt themselves. We need - * to manually disable channels that are left running - */ - if (!usbc_hcint.s.chhltd) { - if (usbc_hcchar.s.chena) { - union cvmx_usbcx_hcintmskx hcintmsk; - /* Disable all interrupts except CHHLTD */ - hcintmsk.u32 = 0; - hcintmsk.s.chhltdmsk = 1; - cvmx_usb_write_csr32(usb, - CVMX_USBCX_HCINTMSKX(channel, usb->index), - hcintmsk.u32); - usbc_hcchar.s.chdis = 1; - cvmx_usb_write_csr32(usb, - CVMX_USBCX_HCCHARX(channel, usb->index), - usbc_hcchar.u32); - return 0; - } else if (usbc_hcint.s.xfercompl) { - /* - * Successful IN/OUT with transfer complete. - * Channel halt isn't needed. - */ - } else { - dev_err(dev, "USB%d: Channel %d interrupt without halt\n", - usb->index, channel); - return 0; - } - } - } else { - /* - * There is are no interrupts that we need to process when the - * channel is still running - */ - if (!usbc_hcint.s.chhltd) - return 0; - } - - /* Disable the channel interrupts now that it is done */ - cvmx_usb_write_csr32(usb, CVMX_USBCX_HCINTMSKX(channel, usb->index), 0); - usb->idle_hardware_channels |= (1 << channel); - - /* Make sure this channel is tied to a valid pipe */ - pipe = usb->pipe_for_channel[channel]; - prefetch(pipe); - if (!pipe) - return 0; - transaction = list_first_entry(&pipe->transactions, - typeof(*transaction), - node); - prefetch(transaction); - - /* - * Disconnect this pipe from the HW channel. Later the schedule - * function will figure out which pipe needs to go - */ - usb->pipe_for_channel[channel] = NULL; - pipe->flags &= ~CVMX_USB_PIPE_FLAGS_SCHEDULED; - - /* - * Read the channel config info so we can figure out how much data - * transferred - */ - usbc_hcchar.u32 = cvmx_usb_read_csr32(usb, - CVMX_USBCX_HCCHARX(channel, usb->index)); - usbc_hctsiz.u32 = cvmx_usb_read_csr32(usb, - CVMX_USBCX_HCTSIZX(channel, usb->index)); - - /* - * Calculating the number of bytes successfully transferred is dependent - * on the transfer direction - */ - packets_processed = transaction->pktcnt - usbc_hctsiz.s.pktcnt; - if (usbc_hcchar.s.epdir) { - /* - * IN transactions are easy. For every byte received the - * hardware decrements xfersize. All we need to do is subtract - * the current value of xfersize from its starting value and we - * know how many bytes were written to the buffer - */ - bytes_this_transfer = transaction->xfersize - - usbc_hctsiz.s.xfersize; - } else { - /* - * OUT transaction don't decrement xfersize. Instead pktcnt is - * decremented on every successful packet send. The hardware - * does this when it receives an ACK, or NYET. If it doesn't - * receive one of these responses pktcnt doesn't change - */ - bytes_this_transfer = packets_processed * usbc_hcchar.s.mps; - /* - * The last packet may not be a full transfer if we didn't have - * enough data - */ - if (bytes_this_transfer > transaction->xfersize) - bytes_this_transfer = transaction->xfersize; - } - /* Figure out how many bytes were in the last packet of the transfer */ - if (packets_processed) - bytes_in_last_packet = bytes_this_transfer - - (packets_processed - 1) * usbc_hcchar.s.mps; - else - bytes_in_last_packet = bytes_this_transfer; - - /* - * As a special case, setup transactions output the setup header, not - * the user's data. For this reason we don't count setup data as bytes - * transferred - */ - if ((transaction->stage == CVMX_USB_STAGE_SETUP) || - (transaction->stage == CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE)) - bytes_this_transfer = 0; - - /* - * Add the bytes transferred to the running total. It is important that - * bytes_this_transfer doesn't count any data that needs to be - * retransmitted - */ - transaction->actual_bytes += bytes_this_transfer; - if (transaction->type == CVMX_USB_TRANSFER_ISOCHRONOUS) - buffer_space_left = transaction->iso_packets[0].length - - transaction->actual_bytes; - else - buffer_space_left = transaction->buffer_length - - transaction->actual_bytes; - - /* - * We need to remember the PID toggle state for the next transaction. - * The hardware already updated it for the next transaction - */ - pipe->pid_toggle = !(usbc_hctsiz.s.pid == 0); - - /* - * For high speed bulk out, assume the next transaction will need to do - * a ping before proceeding. If this isn't true the ACK processing below - * will clear this flag - */ - if ((pipe->device_speed == CVMX_USB_SPEED_HIGH) && - (pipe->transfer_type == CVMX_USB_TRANSFER_BULK) && - (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT)) - pipe->flags |= CVMX_USB_PIPE_FLAGS_NEED_PING; - - if (WARN_ON_ONCE(bytes_this_transfer < 0)) { - /* - * In some rare cases the DMA engine seems to get stuck and - * keeps substracting same byte count over and over again. In - * such case we just need to fail every transaction. - */ - cvmx_usb_complete(usb, pipe, transaction, - CVMX_USB_STATUS_ERROR); - return 0; - } - - if (usbc_hcint.s.stall) { - /* - * STALL as a response means this transaction cannot be - * completed because the device can't process transactions. Tell - * the user. Any data that was transferred will be counted on - * the actual bytes transferred - */ - pipe->pid_toggle = 0; - cvmx_usb_complete(usb, pipe, transaction, - CVMX_USB_STATUS_STALL); - } else if (usbc_hcint.s.xacterr) { - /* - * XactErr as a response means the device signaled - * something wrong with the transfer. For example, PID - * toggle errors cause these. - */ - cvmx_usb_complete(usb, pipe, transaction, - CVMX_USB_STATUS_XACTERR); - } else if (usbc_hcint.s.bblerr) { - /* Babble Error (BblErr) */ - cvmx_usb_complete(usb, pipe, transaction, - CVMX_USB_STATUS_BABBLEERR); - } else if (usbc_hcint.s.datatglerr) { - /* Data toggle error */ - cvmx_usb_complete(usb, pipe, transaction, - CVMX_USB_STATUS_DATATGLERR); - } else if (usbc_hcint.s.nyet) { - /* - * NYET as a response is only allowed in three cases: as a - * response to a ping, as a response to a split transaction, and - * as a response to a bulk out. The ping case is handled by - * hardware, so we only have splits and bulk out - */ - if (!cvmx_usb_pipe_needs_split(usb, pipe)) { - transaction->retries = 0; - /* - * If there is more data to go then we need to try - * again. Otherwise this transaction is complete - */ - if ((buffer_space_left == 0) || - (bytes_in_last_packet < pipe->max_packet)) - cvmx_usb_complete(usb, pipe, - transaction, - CVMX_USB_STATUS_OK); - } else { - /* - * Split transactions retry the split complete 4 times - * then rewind to the start split and do the entire - * transactions again - */ - transaction->retries++; - if ((transaction->retries & 0x3) == 0) { - /* - * Rewind to the beginning of the transaction by - * anding off the split complete bit - */ - transaction->stage &= ~1; - pipe->split_sc_frame = -1; - } - } - } else if (usbc_hcint.s.ack) { - transaction->retries = 0; - /* - * The ACK bit can only be checked after the other error bits. - * This is because a multi packet transfer may succeed in a - * number of packets and then get a different response on the - * last packet. In this case both ACK and the last response bit - * will be set. If none of the other response bits is set, then - * the last packet must have been an ACK - * - * Since we got an ACK, we know we don't need to do a ping on - * this pipe - */ - pipe->flags &= ~CVMX_USB_PIPE_FLAGS_NEED_PING; - - switch (transaction->type) { - case CVMX_USB_TRANSFER_CONTROL: - cvmx_usb_transfer_control(usb, pipe, transaction, - usbc_hcchar, - buffer_space_left, - bytes_in_last_packet); - break; - case CVMX_USB_TRANSFER_BULK: - cvmx_usb_transfer_bulk(usb, pipe, transaction, - usbc_hcint, buffer_space_left, - bytes_in_last_packet); - break; - case CVMX_USB_TRANSFER_INTERRUPT: - cvmx_usb_transfer_intr(usb, pipe, transaction, - buffer_space_left, - bytes_in_last_packet); - break; - case CVMX_USB_TRANSFER_ISOCHRONOUS: - cvmx_usb_transfer_isoc(usb, pipe, transaction, - buffer_space_left, - bytes_in_last_packet, - bytes_this_transfer); - break; - } - } else if (usbc_hcint.s.nak) { - /* - * If this was a split then clear our split in progress marker. - */ - if (usb->active_split == transaction) - usb->active_split = NULL; - /* - * NAK as a response means the device couldn't accept the - * transaction, but it should be retried in the future. Rewind - * to the beginning of the transaction by anding off the split - * complete bit. Retry in the next interval - */ - transaction->retries = 0; - transaction->stage &= ~1; - pipe->next_tx_frame += pipe->interval; - if (pipe->next_tx_frame < usb->frame_number) - pipe->next_tx_frame = usb->frame_number + - pipe->interval - - (usb->frame_number - pipe->next_tx_frame) % - pipe->interval; - } else { - struct cvmx_usb_port_status port; - - port = cvmx_usb_get_status(usb); - if (port.port_enabled) { - /* We'll retry the exact same transaction again */ - transaction->retries++; - } else { - /* - * We get channel halted interrupts with no result bits - * sets when the cable is unplugged - */ - cvmx_usb_complete(usb, pipe, transaction, - CVMX_USB_STATUS_ERROR); - } - } - return 0; -} - -static void octeon_usb_port_callback(struct octeon_hcd *usb) -{ - spin_unlock(&usb->lock); - usb_hcd_poll_rh_status(octeon_to_hcd(usb)); - spin_lock(&usb->lock); -} - -/** - * Poll the USB block for status and call all needed callback - * handlers. This function is meant to be called in the interrupt - * handler for the USB controller. It can also be called - * periodically in a loop for non-interrupt based operation. - * - * @usb: USB device state populated by cvmx_usb_initialize(). - * - * Returns: 0 or a negative error code. - */ -static int cvmx_usb_poll(struct octeon_hcd *usb) -{ - union cvmx_usbcx_hfnum usbc_hfnum; - union cvmx_usbcx_gintsts usbc_gintsts; - - prefetch_range(usb, sizeof(*usb)); - - /* Update the frame counter */ - usbc_hfnum.u32 = cvmx_usb_read_csr32(usb, CVMX_USBCX_HFNUM(usb->index)); - if ((usb->frame_number & 0x3fff) > usbc_hfnum.s.frnum) - usb->frame_number += 0x4000; - usb->frame_number &= ~0x3fffull; - usb->frame_number |= usbc_hfnum.s.frnum; - - /* Read the pending interrupts */ - usbc_gintsts.u32 = cvmx_usb_read_csr32(usb, - CVMX_USBCX_GINTSTS(usb->index)); - - /* Clear the interrupts now that we know about them */ - cvmx_usb_write_csr32(usb, CVMX_USBCX_GINTSTS(usb->index), - usbc_gintsts.u32); - - if (usbc_gintsts.s.rxflvl) { - /* - * RxFIFO Non-Empty (RxFLvl) - * Indicates that there is at least one packet pending to be - * read from the RxFIFO. - * - * In DMA mode this is handled by hardware - */ - if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) - cvmx_usb_poll_rx_fifo(usb); - } - if (usbc_gintsts.s.ptxfemp || usbc_gintsts.s.nptxfemp) { - /* Fill the Tx FIFOs when not in DMA mode */ - if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) - cvmx_usb_poll_tx_fifo(usb); - } - if (usbc_gintsts.s.disconnint || usbc_gintsts.s.prtint) { - union cvmx_usbcx_hprt usbc_hprt; - /* - * Disconnect Detected Interrupt (DisconnInt) - * Asserted when a device disconnect is detected. - * - * Host Port Interrupt (PrtInt) - * The core sets this bit to indicate a change in port status of - * one of the O2P USB core ports in Host mode. The application - * must read the Host Port Control and Status (HPRT) register to - * determine the exact event that caused this interrupt. The - * application must clear the appropriate status bit in the Host - * Port Control and Status register to clear this bit. - * - * Call the user's port callback - */ - octeon_usb_port_callback(usb); - /* Clear the port change bits */ - usbc_hprt.u32 = - cvmx_usb_read_csr32(usb, CVMX_USBCX_HPRT(usb->index)); - usbc_hprt.s.prtena = 0; - cvmx_usb_write_csr32(usb, CVMX_USBCX_HPRT(usb->index), - usbc_hprt.u32); - } - if (usbc_gintsts.s.hchint) { - /* - * Host Channels Interrupt (HChInt) - * The core sets this bit to indicate that an interrupt is - * pending on one of the channels of the core (in Host mode). - * The application must read the Host All Channels Interrupt - * (HAINT) register to determine the exact number of the channel - * on which the interrupt occurred, and then read the - * corresponding Host Channel-n Interrupt (HCINTn) register to - * determine the exact cause of the interrupt. The application - * must clear the appropriate status bit in the HCINTn register - * to clear this bit. - */ - union cvmx_usbcx_haint usbc_haint; - - usbc_haint.u32 = cvmx_usb_read_csr32(usb, - CVMX_USBCX_HAINT(usb->index)); - while (usbc_haint.u32) { - int channel; - - channel = __fls(usbc_haint.u32); - cvmx_usb_poll_channel(usb, channel); - usbc_haint.u32 ^= 1 << channel; - } - } - - cvmx_usb_schedule(usb, usbc_gintsts.s.sof); - - return 0; -} - -/* convert between an HCD pointer and the corresponding struct octeon_hcd */ -static inline struct octeon_hcd *hcd_to_octeon(struct usb_hcd *hcd) -{ - return (struct octeon_hcd *)(hcd->hcd_priv); -} - -static irqreturn_t octeon_usb_irq(struct usb_hcd *hcd) -{ - struct octeon_hcd *usb = hcd_to_octeon(hcd); - unsigned long flags; - - spin_lock_irqsave(&usb->lock, flags); - cvmx_usb_poll(usb); - spin_unlock_irqrestore(&usb->lock, flags); - return IRQ_HANDLED; -} - -static int octeon_usb_start(struct usb_hcd *hcd) -{ - hcd->state = HC_STATE_RUNNING; - return 0; -} - -static void octeon_usb_stop(struct usb_hcd *hcd) -{ - hcd->state = HC_STATE_HALT; -} - -static int octeon_usb_get_frame_number(struct usb_hcd *hcd) -{ - struct octeon_hcd *usb = hcd_to_octeon(hcd); - - return cvmx_usb_get_frame_number(usb); -} - -static int octeon_usb_urb_enqueue(struct usb_hcd *hcd, - struct urb *urb, - gfp_t mem_flags) -{ - struct octeon_hcd *usb = hcd_to_octeon(hcd); - struct device *dev = hcd->self.controller; - struct cvmx_usb_transaction *transaction = NULL; - struct cvmx_usb_pipe *pipe; - unsigned long flags; - struct cvmx_usb_iso_packet *iso_packet; - struct usb_host_endpoint *ep = urb->ep; - int rc; - - urb->status = 0; - spin_lock_irqsave(&usb->lock, flags); - - rc = usb_hcd_link_urb_to_ep(hcd, urb); - if (rc) { - spin_unlock_irqrestore(&usb->lock, flags); - return rc; - } - - if (!ep->hcpriv) { - enum cvmx_usb_transfer transfer_type; - enum cvmx_usb_speed speed; - int split_device = 0; - int split_port = 0; - - switch (usb_pipetype(urb->pipe)) { - case PIPE_ISOCHRONOUS: - transfer_type = CVMX_USB_TRANSFER_ISOCHRONOUS; - break; - case PIPE_INTERRUPT: - transfer_type = CVMX_USB_TRANSFER_INTERRUPT; - break; - case PIPE_CONTROL: - transfer_type = CVMX_USB_TRANSFER_CONTROL; - break; - default: - transfer_type = CVMX_USB_TRANSFER_BULK; - break; - } - switch (urb->dev->speed) { - case USB_SPEED_LOW: - speed = CVMX_USB_SPEED_LOW; - break; - case USB_SPEED_FULL: - speed = CVMX_USB_SPEED_FULL; - break; - default: - speed = CVMX_USB_SPEED_HIGH; - break; - } - /* - * For slow devices on high speed ports we need to find the hub - * that does the speed translation so we know where to send the - * split transactions. - */ - if (speed != CVMX_USB_SPEED_HIGH) { - /* - * Start at this device and work our way up the usb - * tree. - */ - struct usb_device *dev = urb->dev; - - while (dev->parent) { - /* - * If our parent is high speed then he'll - * receive the splits. - */ - if (dev->parent->speed == USB_SPEED_HIGH) { - split_device = dev->parent->devnum; - split_port = dev->portnum; - break; - } - /* - * Move up the tree one level. If we make it all - * the way up the tree, then the port must not - * be in high speed mode and we don't need a - * split. - */ - dev = dev->parent; - } - } - pipe = cvmx_usb_open_pipe(usb, usb_pipedevice(urb->pipe), - usb_pipeendpoint(urb->pipe), speed, - le16_to_cpu(ep->desc.wMaxPacketSize) - & 0x7ff, - transfer_type, - usb_pipein(urb->pipe) ? - CVMX_USB_DIRECTION_IN : - CVMX_USB_DIRECTION_OUT, - urb->interval, - (le16_to_cpu(ep->desc.wMaxPacketSize) - >> 11) & 0x3, - split_device, split_port); - if (!pipe) { - usb_hcd_unlink_urb_from_ep(hcd, urb); - spin_unlock_irqrestore(&usb->lock, flags); - dev_dbg(dev, "Failed to create pipe\n"); - return -ENOMEM; - } - ep->hcpriv = pipe; - } else { - pipe = ep->hcpriv; - } - - switch (usb_pipetype(urb->pipe)) { - case PIPE_ISOCHRONOUS: - dev_dbg(dev, "Submit isochronous to %d.%d\n", - usb_pipedevice(urb->pipe), - usb_pipeendpoint(urb->pipe)); - /* - * Allocate a structure to use for our private list of - * isochronous packets. - */ - iso_packet = kmalloc_array(urb->number_of_packets, - sizeof(struct cvmx_usb_iso_packet), - GFP_ATOMIC); - if (iso_packet) { - int i; - /* Fill the list with the data from the URB */ - for (i = 0; i < urb->number_of_packets; i++) { - iso_packet[i].offset = - urb->iso_frame_desc[i].offset; - iso_packet[i].length = - urb->iso_frame_desc[i].length; - iso_packet[i].status = CVMX_USB_STATUS_ERROR; - } - /* - * Store a pointer to the list in the URB setup_packet - * field. We know this currently isn't being used and - * this saves us a bunch of logic. - */ - urb->setup_packet = (char *)iso_packet; - transaction = cvmx_usb_submit_isochronous(usb, - pipe, urb); - /* - * If submit failed we need to free our private packet - * list. - */ - if (!transaction) { - urb->setup_packet = NULL; - kfree(iso_packet); - } - } - break; - case PIPE_INTERRUPT: - dev_dbg(dev, "Submit interrupt to %d.%d\n", - usb_pipedevice(urb->pipe), - usb_pipeendpoint(urb->pipe)); - transaction = cvmx_usb_submit_interrupt(usb, pipe, urb); - break; - case PIPE_CONTROL: - dev_dbg(dev, "Submit control to %d.%d\n", - usb_pipedevice(urb->pipe), - usb_pipeendpoint(urb->pipe)); - transaction = cvmx_usb_submit_control(usb, pipe, urb); - break; - case PIPE_BULK: - dev_dbg(dev, "Submit bulk to %d.%d\n", - usb_pipedevice(urb->pipe), - usb_pipeendpoint(urb->pipe)); - transaction = cvmx_usb_submit_bulk(usb, pipe, urb); - break; - } - if (!transaction) { - usb_hcd_unlink_urb_from_ep(hcd, urb); - spin_unlock_irqrestore(&usb->lock, flags); - dev_dbg(dev, "Failed to submit\n"); - return -ENOMEM; - } - urb->hcpriv = transaction; - spin_unlock_irqrestore(&usb->lock, flags); - return 0; -} - -static int octeon_usb_urb_dequeue(struct usb_hcd *hcd, - struct urb *urb, - int status) -{ - struct octeon_hcd *usb = hcd_to_octeon(hcd); - unsigned long flags; - int rc; - - if (!urb->dev) - return -EINVAL; - - spin_lock_irqsave(&usb->lock, flags); - - rc = usb_hcd_check_unlink_urb(hcd, urb, status); - if (rc) - goto out; - - urb->status = status; - cvmx_usb_cancel(usb, urb->ep->hcpriv, urb->hcpriv); - -out: - spin_unlock_irqrestore(&usb->lock, flags); - - return rc; -} - -static void octeon_usb_endpoint_disable(struct usb_hcd *hcd, - struct usb_host_endpoint *ep) -{ - struct device *dev = hcd->self.controller; - - if (ep->hcpriv) { - struct octeon_hcd *usb = hcd_to_octeon(hcd); - struct cvmx_usb_pipe *pipe = ep->hcpriv; - unsigned long flags; - - spin_lock_irqsave(&usb->lock, flags); - cvmx_usb_cancel_all(usb, pipe); - if (cvmx_usb_close_pipe(usb, pipe)) - dev_dbg(dev, "Closing pipe %p failed\n", pipe); - spin_unlock_irqrestore(&usb->lock, flags); - ep->hcpriv = NULL; - } -} - -static int octeon_usb_hub_status_data(struct usb_hcd *hcd, char *buf) -{ - struct octeon_hcd *usb = hcd_to_octeon(hcd); - struct cvmx_usb_port_status port_status; - unsigned long flags; - - spin_lock_irqsave(&usb->lock, flags); - port_status = cvmx_usb_get_status(usb); - spin_unlock_irqrestore(&usb->lock, flags); - buf[0] = port_status.connect_change << 1; - - return buf[0] != 0; -} - -static int octeon_usb_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, - u16 wIndex, char *buf, u16 wLength) -{ - struct octeon_hcd *usb = hcd_to_octeon(hcd); - struct device *dev = hcd->self.controller; - struct cvmx_usb_port_status usb_port_status; - int port_status; - struct usb_hub_descriptor *desc; - unsigned long flags; - - switch (typeReq) { - case ClearHubFeature: - dev_dbg(dev, "ClearHubFeature\n"); - switch (wValue) { - case C_HUB_LOCAL_POWER: - case C_HUB_OVER_CURRENT: - /* Nothing required here */ - break; - default: - return -EINVAL; - } - break; - case ClearPortFeature: - dev_dbg(dev, "ClearPortFeature\n"); - if (wIndex != 1) { - dev_dbg(dev, " INVALID\n"); - return -EINVAL; - } - - switch (wValue) { - case USB_PORT_FEAT_ENABLE: - dev_dbg(dev, " ENABLE\n"); - spin_lock_irqsave(&usb->lock, flags); - cvmx_usb_disable(usb); - spin_unlock_irqrestore(&usb->lock, flags); - break; - case USB_PORT_FEAT_SUSPEND: - dev_dbg(dev, " SUSPEND\n"); - /* Not supported on Octeon */ - break; - case USB_PORT_FEAT_POWER: - dev_dbg(dev, " POWER\n"); - /* Not supported on Octeon */ - break; - case USB_PORT_FEAT_INDICATOR: - dev_dbg(dev, " INDICATOR\n"); - /* Port inidicator not supported */ - break; - case USB_PORT_FEAT_C_CONNECTION: - dev_dbg(dev, " C_CONNECTION\n"); - /* Clears drivers internal connect status change flag */ - spin_lock_irqsave(&usb->lock, flags); - usb->port_status = cvmx_usb_get_status(usb); - spin_unlock_irqrestore(&usb->lock, flags); - break; - case USB_PORT_FEAT_C_RESET: - dev_dbg(dev, " C_RESET\n"); - /* - * Clears the driver's internal Port Reset Change flag. - */ - spin_lock_irqsave(&usb->lock, flags); - usb->port_status = cvmx_usb_get_status(usb); - spin_unlock_irqrestore(&usb->lock, flags); - break; - case USB_PORT_FEAT_C_ENABLE: - dev_dbg(dev, " C_ENABLE\n"); - /* - * Clears the driver's internal Port Enable/Disable - * Change flag. - */ - spin_lock_irqsave(&usb->lock, flags); - usb->port_status = cvmx_usb_get_status(usb); - spin_unlock_irqrestore(&usb->lock, flags); - break; - case USB_PORT_FEAT_C_SUSPEND: - dev_dbg(dev, " C_SUSPEND\n"); - /* - * Clears the driver's internal Port Suspend Change - * flag, which is set when resume signaling on the host - * port is complete. - */ - break; - case USB_PORT_FEAT_C_OVER_CURRENT: - dev_dbg(dev, " C_OVER_CURRENT\n"); - /* Clears the driver's overcurrent Change flag */ - spin_lock_irqsave(&usb->lock, flags); - usb->port_status = cvmx_usb_get_status(usb); - spin_unlock_irqrestore(&usb->lock, flags); - break; - default: - dev_dbg(dev, " UNKNOWN\n"); - return -EINVAL; - } - break; - case GetHubDescriptor: - dev_dbg(dev, "GetHubDescriptor\n"); - desc = (struct usb_hub_descriptor *)buf; - desc->bDescLength = 9; - desc->bDescriptorType = 0x29; - desc->bNbrPorts = 1; - desc->wHubCharacteristics = cpu_to_le16(0x08); - desc->bPwrOn2PwrGood = 1; - desc->bHubContrCurrent = 0; - desc->u.hs.DeviceRemovable[0] = 0; - desc->u.hs.DeviceRemovable[1] = 0xff; - break; - case GetHubStatus: - dev_dbg(dev, "GetHubStatus\n"); - *(__le32 *)buf = 0; - break; - case GetPortStatus: - dev_dbg(dev, "GetPortStatus\n"); - if (wIndex != 1) { - dev_dbg(dev, " INVALID\n"); - return -EINVAL; - } - - spin_lock_irqsave(&usb->lock, flags); - usb_port_status = cvmx_usb_get_status(usb); - spin_unlock_irqrestore(&usb->lock, flags); - port_status = 0; - - if (usb_port_status.connect_change) { - port_status |= (1 << USB_PORT_FEAT_C_CONNECTION); - dev_dbg(dev, " C_CONNECTION\n"); - } - - if (usb_port_status.port_enabled) { - port_status |= (1 << USB_PORT_FEAT_C_ENABLE); - dev_dbg(dev, " C_ENABLE\n"); - } - - if (usb_port_status.connected) { - port_status |= (1 << USB_PORT_FEAT_CONNECTION); - dev_dbg(dev, " CONNECTION\n"); - } - - if (usb_port_status.port_enabled) { - port_status |= (1 << USB_PORT_FEAT_ENABLE); - dev_dbg(dev, " ENABLE\n"); - } - - if (usb_port_status.port_over_current) { - port_status |= (1 << USB_PORT_FEAT_OVER_CURRENT); - dev_dbg(dev, " OVER_CURRENT\n"); - } - - if (usb_port_status.port_powered) { - port_status |= (1 << USB_PORT_FEAT_POWER); - dev_dbg(dev, " POWER\n"); - } - - if (usb_port_status.port_speed == CVMX_USB_SPEED_HIGH) { - port_status |= USB_PORT_STAT_HIGH_SPEED; - dev_dbg(dev, " HIGHSPEED\n"); - } else if (usb_port_status.port_speed == CVMX_USB_SPEED_LOW) { - port_status |= (1 << USB_PORT_FEAT_LOWSPEED); - dev_dbg(dev, " LOWSPEED\n"); - } - - *((__le32 *)buf) = cpu_to_le32(port_status); - break; - case SetHubFeature: - dev_dbg(dev, "SetHubFeature\n"); - /* No HUB features supported */ - break; - case SetPortFeature: - dev_dbg(dev, "SetPortFeature\n"); - if (wIndex != 1) { - dev_dbg(dev, " INVALID\n"); - return -EINVAL; - } - - switch (wValue) { - case USB_PORT_FEAT_SUSPEND: - dev_dbg(dev, " SUSPEND\n"); - return -EINVAL; - case USB_PORT_FEAT_POWER: - dev_dbg(dev, " POWER\n"); - /* - * Program the port power bit to drive VBUS on the USB. - */ - spin_lock_irqsave(&usb->lock, flags); - USB_SET_FIELD32(CVMX_USBCX_HPRT(usb->index), - cvmx_usbcx_hprt, prtpwr, 1); - spin_unlock_irqrestore(&usb->lock, flags); - return 0; - case USB_PORT_FEAT_RESET: - dev_dbg(dev, " RESET\n"); - spin_lock_irqsave(&usb->lock, flags); - cvmx_usb_reset_port(usb); - spin_unlock_irqrestore(&usb->lock, flags); - return 0; - case USB_PORT_FEAT_INDICATOR: - dev_dbg(dev, " INDICATOR\n"); - /* Not supported */ - break; - default: - dev_dbg(dev, " UNKNOWN\n"); - return -EINVAL; - } - break; - default: - dev_dbg(dev, "Unknown root hub request\n"); - return -EINVAL; - } - return 0; -} - -static const struct hc_driver octeon_hc_driver = { - .description = "Octeon USB", - .product_desc = "Octeon Host Controller", - .hcd_priv_size = sizeof(struct octeon_hcd), - .irq = octeon_usb_irq, - .flags = HCD_MEMORY | HCD_DMA | HCD_USB2, - .start = octeon_usb_start, - .stop = octeon_usb_stop, - .urb_enqueue = octeon_usb_urb_enqueue, - .urb_dequeue = octeon_usb_urb_dequeue, - .endpoint_disable = octeon_usb_endpoint_disable, - .get_frame_number = octeon_usb_get_frame_number, - .hub_status_data = octeon_usb_hub_status_data, - .hub_control = octeon_usb_hub_control, - .map_urb_for_dma = octeon_map_urb_for_dma, - .unmap_urb_for_dma = octeon_unmap_urb_for_dma, -}; - -static int octeon_usb_probe(struct platform_device *pdev) -{ - int status; - int initialize_flags; - int usb_num; - struct resource *res_mem; - struct device_node *usbn_node; - int irq = platform_get_irq(pdev, 0); - struct device *dev = &pdev->dev; - struct octeon_hcd *usb; - struct usb_hcd *hcd; - u32 clock_rate = 48000000; - bool is_crystal_clock = false; - const char *clock_type; - int i; - - if (!dev->of_node) { - dev_err(dev, "Error: empty of_node\n"); - return -ENXIO; - } - usbn_node = dev->of_node->parent; - - i = of_property_read_u32(usbn_node, - "clock-frequency", &clock_rate); - if (i) - i = of_property_read_u32(usbn_node, - "refclk-frequency", &clock_rate); - if (i) { - dev_err(dev, "No USBN \"clock-frequency\"\n"); - return -ENXIO; - } - switch (clock_rate) { - case 12000000: - initialize_flags = CVMX_USB_INITIALIZE_FLAGS_CLOCK_12MHZ; - break; - case 24000000: - initialize_flags = CVMX_USB_INITIALIZE_FLAGS_CLOCK_24MHZ; - break; - case 48000000: - initialize_flags = CVMX_USB_INITIALIZE_FLAGS_CLOCK_48MHZ; - break; - default: - dev_err(dev, "Illegal USBN \"clock-frequency\" %u\n", - clock_rate); - return -ENXIO; - } - - i = of_property_read_string(usbn_node, - "cavium,refclk-type", &clock_type); - if (i) - i = of_property_read_string(usbn_node, - "refclk-type", &clock_type); - - if (!i && strcmp("crystal", clock_type) == 0) - is_crystal_clock = true; - - if (is_crystal_clock) - initialize_flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_XI; - else - initialize_flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND; - - res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res_mem) { - dev_err(dev, "found no memory resource\n"); - return -ENXIO; - } - usb_num = (res_mem->start >> 44) & 1; - - if (irq < 0) { - /* Defective device tree, but we know how to fix it. */ - irq_hw_number_t hwirq = usb_num ? (1 << 6) + 17 : 56; - - irq = irq_create_mapping(NULL, hwirq); - } - - /* - * Set the DMA mask to 64bits so we get buffers already translated for - * DMA. - */ - i = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(64)); - if (i) - return i; - - /* - * Only cn52XX and cn56XX have DWC_OTG USB hardware and the - * IOB priority registers. Under heavy network load USB - * hardware can be starved by the IOB causing a crash. Give - * it a priority boost if it has been waiting more than 400 - * cycles to avoid this situation. - * - * Testing indicates that a cnt_val of 8192 is not sufficient, - * but no failures are seen with 4096. We choose a value of - * 400 to give a safety factor of 10. - */ - if (OCTEON_IS_MODEL(OCTEON_CN52XX) || OCTEON_IS_MODEL(OCTEON_CN56XX)) { - union cvmx_iob_n2c_l2c_pri_cnt pri_cnt; - - pri_cnt.u64 = 0; - pri_cnt.s.cnt_enb = 1; - pri_cnt.s.cnt_val = 400; - cvmx_write_csr(CVMX_IOB_N2C_L2C_PRI_CNT, pri_cnt.u64); - } - - hcd = usb_create_hcd(&octeon_hc_driver, dev, dev_name(dev)); - if (!hcd) { - dev_dbg(dev, "Failed to allocate memory for HCD\n"); - return -1; - } - hcd->uses_new_polling = 1; - usb = (struct octeon_hcd *)hcd->hcd_priv; - - spin_lock_init(&usb->lock); - - usb->init_flags = initialize_flags; - - /* Initialize the USB state structure */ - usb->index = usb_num; - INIT_LIST_HEAD(&usb->idle_pipes); - for (i = 0; i < ARRAY_SIZE(usb->active_pipes); i++) - INIT_LIST_HEAD(&usb->active_pipes[i]); - - /* Due to an errata, CN31XX doesn't support DMA */ - if (OCTEON_IS_MODEL(OCTEON_CN31XX)) { - usb->init_flags |= CVMX_USB_INITIALIZE_FLAGS_NO_DMA; - /* Only use one channel with non DMA */ - usb->idle_hardware_channels = 0x1; - } else if (OCTEON_IS_MODEL(OCTEON_CN5XXX)) { - /* CN5XXX have an errata with channel 3 */ - usb->idle_hardware_channels = 0xf7; - } else { - usb->idle_hardware_channels = 0xff; - } - - status = cvmx_usb_initialize(dev, usb); - if (status) { - dev_dbg(dev, "USB initialization failed with %d\n", status); - usb_put_hcd(hcd); - return -1; - } - - status = usb_add_hcd(hcd, irq, 0); - if (status) { - dev_dbg(dev, "USB add HCD failed with %d\n", status); - usb_put_hcd(hcd); - return -1; - } - device_wakeup_enable(hcd->self.controller); - - dev_info(dev, "Registered HCD for port %d on irq %d\n", usb_num, irq); - - return 0; -} - -static int octeon_usb_remove(struct platform_device *pdev) -{ - int status; - struct device *dev = &pdev->dev; - struct usb_hcd *hcd = dev_get_drvdata(dev); - struct octeon_hcd *usb = hcd_to_octeon(hcd); - unsigned long flags; - - usb_remove_hcd(hcd); - spin_lock_irqsave(&usb->lock, flags); - status = cvmx_usb_shutdown(usb); - spin_unlock_irqrestore(&usb->lock, flags); - if (status) - dev_dbg(dev, "USB shutdown failed with %d\n", status); - - usb_put_hcd(hcd); - - return 0; -} - -static const struct of_device_id octeon_usb_match[] = { - { - .compatible = "cavium,octeon-5750-usbc", - }, - {}, -}; -MODULE_DEVICE_TABLE(of, octeon_usb_match); - -static struct platform_driver octeon_usb_driver = { - .driver = { - .name = "octeon-hcd", - .of_match_table = octeon_usb_match, - }, - .probe = octeon_usb_probe, - .remove = octeon_usb_remove, -}; - -static int __init octeon_usb_driver_init(void) -{ - if (usb_disabled()) - return 0; - - return platform_driver_register(&octeon_usb_driver); -} -module_init(octeon_usb_driver_init); - -static void __exit octeon_usb_driver_exit(void) -{ - if (usb_disabled()) - return; - - platform_driver_unregister(&octeon_usb_driver); -} -module_exit(octeon_usb_driver_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Cavium, Inc. <support@cavium.com>"); -MODULE_DESCRIPTION("Cavium Inc. OCTEON USB Host driver."); diff --git a/drivers/staging/octeon-usb/octeon-hcd.h b/drivers/staging/octeon-usb/octeon-hcd.h deleted file mode 100644 index 9ed619c93a4e..000000000000 --- a/drivers/staging/octeon-usb/octeon-hcd.h +++ /dev/null @@ -1,1847 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Octeon HCD hardware register definitions. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Some parts of the code were originally released under BSD license: - * - * Copyright (c) 2003-2010 Cavium Networks (support@cavium.com). All rights - * reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are - * met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * * Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials provided - * with the distribution. - * - * * Neither the name of Cavium Networks nor the names of - * its contributors may be used to endorse or promote products - * derived from this software without specific prior written - * permission. - * - * This Software, including technical data, may be subject to U.S. export - * control laws, including the U.S. Export Administration Act and its associated - * regulations, and may be subject to export or import regulations in other - * countries. - * - * TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS" - * AND WITH ALL FAULTS AND CAVIUM NETWORKS MAKES NO PROMISES, REPRESENTATIONS OR - * WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO - * THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION - * OR DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM - * SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE, - * MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF - * VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR - * CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT OF USE OR - * PERFORMANCE OF THE SOFTWARE LIES WITH YOU. - */ - -#ifndef __OCTEON_HCD_H__ -#define __OCTEON_HCD_H__ - -#include <asm/bitfield.h> - -#define CVMX_USBCXBASE 0x00016F0010000000ull -#define CVMX_USBCXREG1(reg, bid) \ - (CVMX_ADD_IO_SEG(CVMX_USBCXBASE | reg) + \ - ((bid) & 1) * 0x100000000000ull) -#define CVMX_USBCXREG2(reg, bid, off) \ - (CVMX_ADD_IO_SEG(CVMX_USBCXBASE | reg) + \ - (((off) & 7) + ((bid) & 1) * 0x8000000000ull) * 32) - -#define CVMX_USBCX_GAHBCFG(bid) CVMX_USBCXREG1(0x008, bid) -#define CVMX_USBCX_GHWCFG3(bid) CVMX_USBCXREG1(0x04c, bid) -#define CVMX_USBCX_GINTMSK(bid) CVMX_USBCXREG1(0x018, bid) -#define CVMX_USBCX_GINTSTS(bid) CVMX_USBCXREG1(0x014, bid) -#define CVMX_USBCX_GNPTXFSIZ(bid) CVMX_USBCXREG1(0x028, bid) -#define CVMX_USBCX_GNPTXSTS(bid) CVMX_USBCXREG1(0x02c, bid) -#define CVMX_USBCX_GOTGCTL(bid) CVMX_USBCXREG1(0x000, bid) -#define CVMX_USBCX_GRSTCTL(bid) CVMX_USBCXREG1(0x010, bid) -#define CVMX_USBCX_GRXFSIZ(bid) CVMX_USBCXREG1(0x024, bid) -#define CVMX_USBCX_GRXSTSPH(bid) CVMX_USBCXREG1(0x020, bid) -#define CVMX_USBCX_GUSBCFG(bid) CVMX_USBCXREG1(0x00c, bid) -#define CVMX_USBCX_HAINT(bid) CVMX_USBCXREG1(0x414, bid) -#define CVMX_USBCX_HAINTMSK(bid) CVMX_USBCXREG1(0x418, bid) -#define CVMX_USBCX_HCCHARX(off, bid) CVMX_USBCXREG2(0x500, bid, off) -#define CVMX_USBCX_HCFG(bid) CVMX_USBCXREG1(0x400, bid) -#define CVMX_USBCX_HCINTMSKX(off, bid) CVMX_USBCXREG2(0x50c, bid, off) -#define CVMX_USBCX_HCINTX(off, bid) CVMX_USBCXREG2(0x508, bid, off) -#define CVMX_USBCX_HCSPLTX(off, bid) CVMX_USBCXREG2(0x504, bid, off) -#define CVMX_USBCX_HCTSIZX(off, bid) CVMX_USBCXREG2(0x510, bid, off) -#define CVMX_USBCX_HFIR(bid) CVMX_USBCXREG1(0x404, bid) -#define CVMX_USBCX_HFNUM(bid) CVMX_USBCXREG1(0x408, bid) -#define CVMX_USBCX_HPRT(bid) CVMX_USBCXREG1(0x440, bid) -#define CVMX_USBCX_HPTXFSIZ(bid) CVMX_USBCXREG1(0x100, bid) -#define CVMX_USBCX_HPTXSTS(bid) CVMX_USBCXREG1(0x410, bid) - -#define CVMX_USBNXBID1(bid) (((bid) & 1) * 0x10000000ull) -#define CVMX_USBNXBID2(bid) (((bid) & 1) * 0x100000000000ull) - -#define CVMX_USBNXREG1(reg, bid) \ - (CVMX_ADD_IO_SEG(0x0001180068000000ull | reg) + CVMX_USBNXBID1(bid)) -#define CVMX_USBNXREG2(reg, bid) \ - (CVMX_ADD_IO_SEG(0x00016F0000000000ull | reg) + CVMX_USBNXBID2(bid)) - -#define CVMX_USBNX_CLK_CTL(bid) CVMX_USBNXREG1(0x10, bid) -#define CVMX_USBNX_DMA0_INB_CHN0(bid) CVMX_USBNXREG2(0x818, bid) -#define CVMX_USBNX_DMA0_OUTB_CHN0(bid) CVMX_USBNXREG2(0x858, bid) -#define CVMX_USBNX_USBP_CTL_STATUS(bid) CVMX_USBNXREG1(0x18, bid) - -/** - * cvmx_usbc#_gahbcfg - * - * Core AHB Configuration Register (GAHBCFG) - * - * This register can be used to configure the core after power-on or a change in - * mode of operation. This register mainly contains AHB system-related - * configuration parameters. The AHB is the processor interface to the O2P USB - * core. In general, software need not know about this interface except to - * program the values as specified. - * - * The application must program this register as part of the O2P USB core - * initialization. Do not change this register after the initial programming. - */ -union cvmx_usbcx_gahbcfg { - u32 u32; - /** - * struct cvmx_usbcx_gahbcfg_s - * @ptxfemplvl: Periodic TxFIFO Empty Level (PTxFEmpLvl) - * Software should set this bit to 0x1. - * Indicates when the Periodic TxFIFO Empty Interrupt bit in the - * Core Interrupt register (GINTSTS.PTxFEmp) is triggered. This - * bit is used only in Slave mode. - * * 1'b0: GINTSTS.PTxFEmp interrupt indicates that the Periodic - * TxFIFO is half empty - * * 1'b1: GINTSTS.PTxFEmp interrupt indicates that the Periodic - * TxFIFO is completely empty - * @nptxfemplvl: Non-Periodic TxFIFO Empty Level (NPTxFEmpLvl) - * Software should set this bit to 0x1. - * Indicates when the Non-Periodic TxFIFO Empty Interrupt bit in - * the Core Interrupt register (GINTSTS.NPTxFEmp) is triggered. - * This bit is used only in Slave mode. - * * 1'b0: GINTSTS.NPTxFEmp interrupt indicates that the Non- - * Periodic TxFIFO is half empty - * * 1'b1: GINTSTS.NPTxFEmp interrupt indicates that the Non- - * Periodic TxFIFO is completely empty - * @dmaen: DMA Enable (DMAEn) - * * 1'b0: Core operates in Slave mode - * * 1'b1: Core operates in a DMA mode - * @hbstlen: Burst Length/Type (HBstLen) - * This field has not effect and should be left as 0x0. - * @glblintrmsk: Global Interrupt Mask (GlblIntrMsk) - * Software should set this field to 0x1. - * The application uses this bit to mask or unmask the interrupt - * line assertion to itself. Irrespective of this bit's setting, - * the interrupt status registers are updated by the core. - * * 1'b0: Mask the interrupt assertion to the application. - * * 1'b1: Unmask the interrupt assertion to the application. - */ - struct cvmx_usbcx_gahbcfg_s { - __BITFIELD_FIELD(u32 reserved_9_31 : 23, - __BITFIELD_FIELD(u32 ptxfemplvl : 1, - __BITFIELD_FIELD(u32 nptxfemplvl : 1, - __BITFIELD_FIELD(u32 reserved_6_6 : 1, - __BITFIELD_FIELD(u32 dmaen : 1, - __BITFIELD_FIELD(u32 hbstlen : 4, - __BITFIELD_FIELD(u32 glblintrmsk : 1, - ;))))))) - } s; -}; - -/** - * cvmx_usbc#_ghwcfg3 - * - * User HW Config3 Register (GHWCFG3) - * - * This register contains the configuration options of the O2P USB core. - */ -union cvmx_usbcx_ghwcfg3 { - u32 u32; - /** - * struct cvmx_usbcx_ghwcfg3_s - * @dfifodepth: DFIFO Depth (DfifoDepth) - * This value is in terms of 32-bit words. - * * Minimum value is 32 - * * Maximum value is 32768 - * @ahbphysync: AHB and PHY Synchronous (AhbPhySync) - * Indicates whether AHB and PHY clocks are synchronous to - * each other. - * * 1'b0: No - * * 1'b1: Yes - * This bit is tied to 1. - * @rsttype: Reset Style for Clocked always Blocks in RTL (RstType) - * * 1'b0: Asynchronous reset is used in the core - * * 1'b1: Synchronous reset is used in the core - * @optfeature: Optional Features Removed (OptFeature) - * Indicates whether the User ID register, GPIO interface ports, - * and SOF toggle and counter ports were removed for gate count - * optimization. - * @vendor_control_interface_support: Vendor Control Interface Support - * * 1'b0: Vendor Control Interface is not available on the core. - * * 1'b1: Vendor Control Interface is available. - * @i2c_selection: I2C Selection - * * 1'b0: I2C Interface is not available on the core. - * * 1'b1: I2C Interface is available on the core. - * @otgen: OTG Function Enabled (OtgEn) - * The application uses this bit to indicate the O2P USB core's - * OTG capabilities. - * * 1'b0: Not OTG capable - * * 1'b1: OTG Capable - * @pktsizewidth: Width of Packet Size Counters (PktSizeWidth) - * * 3'b000: 4 bits - * * 3'b001: 5 bits - * * 3'b010: 6 bits - * * 3'b011: 7 bits - * * 3'b100: 8 bits - * * 3'b101: 9 bits - * * 3'b110: 10 bits - * * Others: Reserved - * @xfersizewidth: Width of Transfer Size Counters (XferSizeWidth) - * * 4'b0000: 11 bits - * * 4'b0001: 12 bits - * - ... - * * 4'b1000: 19 bits - * * Others: Reserved - */ - struct cvmx_usbcx_ghwcfg3_s { - __BITFIELD_FIELD(u32 dfifodepth : 16, - __BITFIELD_FIELD(u32 reserved_13_15 : 3, - __BITFIELD_FIELD(u32 ahbphysync : 1, - __BITFIELD_FIELD(u32 rsttype : 1, - __BITFIELD_FIELD(u32 optfeature : 1, - __BITFIELD_FIELD(u32 vendor_control_interface_support : 1, - __BITFIELD_FIELD(u32 i2c_selection : 1, - __BITFIELD_FIELD(u32 otgen : 1, - __BITFIELD_FIELD(u32 pktsizewidth : 3, - __BITFIELD_FIELD(u32 xfersizewidth : 4, - ;)))))))))) - } s; -}; - -/** - * cvmx_usbc#_gintmsk - * - * Core Interrupt Mask Register (GINTMSK) - * - * This register works with the Core Interrupt register to interrupt the - * application. When an interrupt bit is masked, the interrupt associated with - * that bit will not be generated. However, the Core Interrupt (GINTSTS) - * register bit corresponding to that interrupt will still be set. - * Mask interrupt: 1'b0, Unmask interrupt: 1'b1 - */ -union cvmx_usbcx_gintmsk { - u32 u32; - /** - * struct cvmx_usbcx_gintmsk_s - * @wkupintmsk: Resume/Remote Wakeup Detected Interrupt Mask - * (WkUpIntMsk) - * @sessreqintmsk: Session Request/New Session Detected Interrupt Mask - * (SessReqIntMsk) - * @disconnintmsk: Disconnect Detected Interrupt Mask (DisconnIntMsk) - * @conidstschngmsk: Connector ID Status Change Mask (ConIDStsChngMsk) - * @ptxfempmsk: Periodic TxFIFO Empty Mask (PTxFEmpMsk) - * @hchintmsk: Host Channels Interrupt Mask (HChIntMsk) - * @prtintmsk: Host Port Interrupt Mask (PrtIntMsk) - * @fetsuspmsk: Data Fetch Suspended Mask (FetSuspMsk) - * @incomplpmsk: Incomplete Periodic Transfer Mask (incomplPMsk) - * Incomplete Isochronous OUT Transfer Mask - * (incompISOOUTMsk) - * @incompisoinmsk: Incomplete Isochronous IN Transfer Mask - * (incompISOINMsk) - * @oepintmsk: OUT Endpoints Interrupt Mask (OEPIntMsk) - * @inepintmsk: IN Endpoints Interrupt Mask (INEPIntMsk) - * @epmismsk: Endpoint Mismatch Interrupt Mask (EPMisMsk) - * @eopfmsk: End of Periodic Frame Interrupt Mask (EOPFMsk) - * @isooutdropmsk: Isochronous OUT Packet Dropped Interrupt Mask - * (ISOOutDropMsk) - * @enumdonemsk: Enumeration Done Mask (EnumDoneMsk) - * @usbrstmsk: USB Reset Mask (USBRstMsk) - * @usbsuspmsk: USB Suspend Mask (USBSuspMsk) - * @erlysuspmsk: Early Suspend Mask (ErlySuspMsk) - * @i2cint: I2C Interrupt Mask (I2CINT) - * @ulpickintmsk: ULPI Carkit Interrupt Mask (ULPICKINTMsk) - * I2C Carkit Interrupt Mask (I2CCKINTMsk) - * @goutnakeffmsk: Global OUT NAK Effective Mask (GOUTNakEffMsk) - * @ginnakeffmsk: Global Non-Periodic IN NAK Effective Mask - * (GINNakEffMsk) - * @nptxfempmsk: Non-Periodic TxFIFO Empty Mask (NPTxFEmpMsk) - * @rxflvlmsk: Receive FIFO Non-Empty Mask (RxFLvlMsk) - * @sofmsk: Start of (micro)Frame Mask (SofMsk) - * @otgintmsk: OTG Interrupt Mask (OTGIntMsk) - * @modemismsk: Mode Mismatch Interrupt Mask (ModeMisMsk) - */ - struct cvmx_usbcx_gintmsk_s { - __BITFIELD_FIELD(u32 wkupintmsk : 1, - __BITFIELD_FIELD(u32 sessreqintmsk : 1, - __BITFIELD_FIELD(u32 disconnintmsk : 1, - __BITFIELD_FIELD(u32 conidstschngmsk : 1, - __BITFIELD_FIELD(u32 reserved_27_27 : 1, - __BITFIELD_FIELD(u32 ptxfempmsk : 1, - __BITFIELD_FIELD(u32 hchintmsk : 1, - __BITFIELD_FIELD(u32 prtintmsk : 1, - __BITFIELD_FIELD(u32 reserved_23_23 : 1, - __BITFIELD_FIELD(u32 fetsuspmsk : 1, - __BITFIELD_FIELD(u32 incomplpmsk : 1, - __BITFIELD_FIELD(u32 incompisoinmsk : 1, - __BITFIELD_FIELD(u32 oepintmsk : 1, - __BITFIELD_FIELD(u32 inepintmsk : 1, - __BITFIELD_FIELD(u32 epmismsk : 1, - __BITFIELD_FIELD(u32 reserved_16_16 : 1, - __BITFIELD_FIELD(u32 eopfmsk : 1, - __BITFIELD_FIELD(u32 isooutdropmsk : 1, - __BITFIELD_FIELD(u32 enumdonemsk : 1, - __BITFIELD_FIELD(u32 usbrstmsk : 1, - __BITFIELD_FIELD(u32 usbsuspmsk : 1, - __BITFIELD_FIELD(u32 erlysuspmsk : 1, - __BITFIELD_FIELD(u32 i2cint : 1, - __BITFIELD_FIELD(u32 ulpickintmsk : 1, - __BITFIELD_FIELD(u32 goutnakeffmsk : 1, - __BITFIELD_FIELD(u32 ginnakeffmsk : 1, - __BITFIELD_FIELD(u32 nptxfempmsk : 1, - __BITFIELD_FIELD(u32 rxflvlmsk : 1, - __BITFIELD_FIELD(u32 sofmsk : 1, - __BITFIELD_FIELD(u32 otgintmsk : 1, - __BITFIELD_FIELD(u32 modemismsk : 1, - __BITFIELD_FIELD(u32 reserved_0_0 : 1, - ;)))))))))))))))))))))))))))))))) - } s; -}; - -/** - * cvmx_usbc#_gintsts - * - * Core Interrupt Register (GINTSTS) - * - * This register interrupts the application for system-level events in the - * current mode of operation (Device mode or Host mode). It is shown in - * Interrupt. Some of the bits in this register are valid only in Host mode, - * while others are valid in Device mode only. This register also indicates the - * current mode of operation. In order to clear the interrupt status bits of - * type R_SS_WC, the application must write 1'b1 into the bit. The FIFO status - * interrupts are read only; once software reads from or writes to the FIFO - * while servicing these interrupts, FIFO interrupt conditions are cleared - * automatically. - */ -union cvmx_usbcx_gintsts { - u32 u32; - /** - * struct cvmx_usbcx_gintsts_s - * @wkupint: Resume/Remote Wakeup Detected Interrupt (WkUpInt) - * In Device mode, this interrupt is asserted when a resume is - * detected on the USB. In Host mode, this interrupt is asserted - * when a remote wakeup is detected on the USB. - * For more information on how to use this interrupt, see "Partial - * Power-Down and Clock Gating Programming Model" on - * page 353. - * @sessreqint: Session Request/New Session Detected Interrupt - * (SessReqInt) - * In Host mode, this interrupt is asserted when a session request - * is detected from the device. In Device mode, this interrupt is - * asserted when the utmiotg_bvalid signal goes high. - * For more information on how to use this interrupt, see "Partial - * Power-Down and Clock Gating Programming Model" on - * page 353. - * @disconnint: Disconnect Detected Interrupt (DisconnInt) - * Asserted when a device disconnect is detected. - * @conidstschng: Connector ID Status Change (ConIDStsChng) - * The core sets this bit when there is a change in connector ID - * status. - * @ptxfemp: Periodic TxFIFO Empty (PTxFEmp) - * Asserted when the Periodic Transmit FIFO is either half or - * completely empty and there is space for at least one entry to be - * written in the Periodic Request Queue. The half or completely - * empty status is determined by the Periodic TxFIFO Empty Level - * bit in the Core AHB Configuration register - * (GAHBCFG.PTxFEmpLvl). - * @hchint: Host Channels Interrupt (HChInt) - * The core sets this bit to indicate that an interrupt is pending - * on one of the channels of the core (in Host mode). The - * application must read the Host All Channels Interrupt (HAINT) - * register to determine the exact number of the channel on which - * the interrupt occurred, and then read the corresponding Host - * Channel-n Interrupt (HCINTn) register to determine the exact - * cause of the interrupt. The application must clear the - * appropriate status bit in the HCINTn register to clear this bit. - * @prtint: Host Port Interrupt (PrtInt) - * The core sets this bit to indicate a change in port status of - * one of the O2P USB core ports in Host mode. The application must - * read the Host Port Control and Status (HPRT) register to - * determine the exact event that caused this interrupt. The - * application must clear the appropriate status bit in the Host - * Port Control and Status register to clear this bit. - * @fetsusp: Data Fetch Suspended (FetSusp) - * This interrupt is valid only in DMA mode. This interrupt - * indicates that the core has stopped fetching data for IN - * endpoints due to the unavailability of TxFIFO space or Request - * Queue space. This interrupt is used by the application for an - * endpoint mismatch algorithm. - * @incomplp: Incomplete Periodic Transfer (incomplP) - * In Host mode, the core sets this interrupt bit when there are - * incomplete periodic transactions still pending which are - * scheduled for the current microframe. - * Incomplete Isochronous OUT Transfer (incompISOOUT) - * The Device mode, the core sets this interrupt to indicate that - * there is at least one isochronous OUT endpoint on which the - * transfer is not completed in the current microframe. This - * interrupt is asserted along with the End of Periodic Frame - * Interrupt (EOPF) bit in this register. - * @incompisoin: Incomplete Isochronous IN Transfer (incompISOIN) - * The core sets this interrupt to indicate that there is at least - * one isochronous IN endpoint on which the transfer is not - * completed in the current microframe. This interrupt is asserted - * along with the End of Periodic Frame Interrupt (EOPF) bit in - * this register. - * @oepint: OUT Endpoints Interrupt (OEPInt) - * The core sets this bit to indicate that an interrupt is pending - * on one of the OUT endpoints of the core (in Device mode). The - * application must read the Device All Endpoints Interrupt - * (DAINT) register to determine the exact number of the OUT - * endpoint on which the interrupt occurred, and then read the - * corresponding Device OUT Endpoint-n Interrupt (DOEPINTn) - * register to determine the exact cause of the interrupt. The - * application must clear the appropriate status bit in the - * corresponding DOEPINTn register to clear this bit. - * @iepint: IN Endpoints Interrupt (IEPInt) - * The core sets this bit to indicate that an interrupt is pending - * on one of the IN endpoints of the core (in Device mode). The - * application must read the Device All Endpoints Interrupt - * (DAINT) register to determine the exact number of the IN - * endpoint on which the interrupt occurred, and then read the - * corresponding Device IN Endpoint-n Interrupt (DIEPINTn) - * register to determine the exact cause of the interrupt. The - * application must clear the appropriate status bit in the - * corresponding DIEPINTn register to clear this bit. - * @epmis: Endpoint Mismatch Interrupt (EPMis) - * Indicates that an IN token has been received for a non-periodic - * endpoint, but the data for another endpoint is present in the - * top of the Non-Periodic Transmit FIFO and the IN endpoint - * mismatch count programmed by the application has expired. - * @eopf: End of Periodic Frame Interrupt (EOPF) - * Indicates that the period specified in the Periodic Frame - * Interval field of the Device Configuration register - * (DCFG.PerFrInt) has been reached in the current microframe. - * @isooutdrop: Isochronous OUT Packet Dropped Interrupt (ISOOutDrop) - * The core sets this bit when it fails to write an isochronous OUT - * packet into the RxFIFO because the RxFIFO doesn't have - * enough space to accommodate a maximum packet size packet - * for the isochronous OUT endpoint. - * @enumdone: Enumeration Done (EnumDone) - * The core sets this bit to indicate that speed enumeration is - * complete. The application must read the Device Status (DSTS) - * register to obtain the enumerated speed. - * @usbrst: USB Reset (USBRst) - * The core sets this bit to indicate that a reset is detected on - * the USB. - * @usbsusp: USB Suspend (USBSusp) - * The core sets this bit to indicate that a suspend was detected - * on the USB. The core enters the Suspended state when there - * is no activity on the phy_line_state_i signal for an extended - * period of time. - * @erlysusp: Early Suspend (ErlySusp) - * The core sets this bit to indicate that an Idle state has been - * detected on the USB for 3 ms. - * @i2cint: I2C Interrupt (I2CINT) - * This bit is always 0x0. - * @ulpickint: ULPI Carkit Interrupt (ULPICKINT) - * This bit is always 0x0. - * @goutnakeff: Global OUT NAK Effective (GOUTNakEff) - * Indicates that the Set Global OUT NAK bit in the Device Control - * register (DCTL.SGOUTNak), set by the application, has taken - * effect in the core. This bit can be cleared by writing the Clear - * Global OUT NAK bit in the Device Control register - * (DCTL.CGOUTNak). - * @ginnakeff: Global IN Non-Periodic NAK Effective (GINNakEff) - * Indicates that the Set Global Non-Periodic IN NAK bit in the - * Device Control register (DCTL.SGNPInNak), set by the - * application, has taken effect in the core. That is, the core has - * sampled the Global IN NAK bit set by the application. This bit - * can be cleared by clearing the Clear Global Non-Periodic IN - * NAK bit in the Device Control register (DCTL.CGNPInNak). - * This interrupt does not necessarily mean that a NAK handshake - * is sent out on the USB. The STALL bit takes precedence over - * the NAK bit. - * @nptxfemp: Non-Periodic TxFIFO Empty (NPTxFEmp) - * This interrupt is asserted when the Non-Periodic TxFIFO is - * either half or completely empty, and there is space for at least - * one entry to be written to the Non-Periodic Transmit Request - * Queue. The half or completely empty status is determined by - * the Non-Periodic TxFIFO Empty Level bit in the Core AHB - * Configuration register (GAHBCFG.NPTxFEmpLvl). - * @rxflvl: RxFIFO Non-Empty (RxFLvl) - * Indicates that there is at least one packet pending to be read - * from the RxFIFO. - * @sof: Start of (micro)Frame (Sof) - * In Host mode, the core sets this bit to indicate that an SOF - * (FS), micro-SOF (HS), or Keep-Alive (LS) is transmitted on the - * USB. The application must write a 1 to this bit to clear the - * interrupt. - * In Device mode, in the core sets this bit to indicate that an - * SOF token has been received on the USB. The application can read - * the Device Status register to get the current (micro)frame - * number. This interrupt is seen only when the core is operating - * at either HS or FS. - * @otgint: OTG Interrupt (OTGInt) - * The core sets this bit to indicate an OTG protocol event. The - * application must read the OTG Interrupt Status (GOTGINT) - * register to determine the exact event that caused this - * interrupt. The application must clear the appropriate status bit - * in the GOTGINT register to clear this bit. - * @modemis: Mode Mismatch Interrupt (ModeMis) - * The core sets this bit when the application is trying to access: - * * A Host mode register, when the core is operating in Device - * mode - * * A Device mode register, when the core is operating in Host - * mode - * The register access is completed on the AHB with an OKAY - * response, but is ignored by the core internally and doesn't - * affect the operation of the core. - * @curmod: Current Mode of Operation (CurMod) - * Indicates the current mode of operation. - * * 1'b0: Device mode - * * 1'b1: Host mode - */ - struct cvmx_usbcx_gintsts_s { - __BITFIELD_FIELD(u32 wkupint : 1, - __BITFIELD_FIELD(u32 sessreqint : 1, - __BITFIELD_FIELD(u32 disconnint : 1, - __BITFIELD_FIELD(u32 conidstschng : 1, - __BITFIELD_FIELD(u32 reserved_27_27 : 1, - __BITFIELD_FIELD(u32 ptxfemp : 1, - __BITFIELD_FIELD(u32 hchint : 1, - __BITFIELD_FIELD(u32 prtint : 1, - __BITFIELD_FIELD(u32 reserved_23_23 : 1, - __BITFIELD_FIELD(u32 fetsusp : 1, - __BITFIELD_FIELD(u32 incomplp : 1, - __BITFIELD_FIELD(u32 incompisoin : 1, - __BITFIELD_FIELD(u32 oepint : 1, - __BITFIELD_FIELD(u32 iepint : 1, - __BITFIELD_FIELD(u32 epmis : 1, - __BITFIELD_FIELD(u32 reserved_16_16 : 1, - __BITFIELD_FIELD(u32 eopf : 1, - __BITFIELD_FIELD(u32 isooutdrop : 1, - __BITFIELD_FIELD(u32 enumdone : 1, - __BITFIELD_FIELD(u32 usbrst : 1, - __BITFIELD_FIELD(u32 usbsusp : 1, - __BITFIELD_FIELD(u32 erlysusp : 1, - __BITFIELD_FIELD(u32 i2cint : 1, - __BITFIELD_FIELD(u32 ulpickint : 1, - __BITFIELD_FIELD(u32 goutnakeff : 1, - __BITFIELD_FIELD(u32 ginnakeff : 1, - __BITFIELD_FIELD(u32 nptxfemp : 1, - __BITFIELD_FIELD(u32 rxflvl : 1, - __BITFIELD_FIELD(u32 sof : 1, - __BITFIELD_FIELD(u32 otgint : 1, - __BITFIELD_FIELD(u32 modemis : 1, - __BITFIELD_FIELD(u32 curmod : 1, - ;)))))))))))))))))))))))))))))))) - } s; -}; - -/** - * cvmx_usbc#_gnptxfsiz - * - * Non-Periodic Transmit FIFO Size Register (GNPTXFSIZ) - * - * The application can program the RAM size and the memory start address for the - * Non-Periodic TxFIFO. - */ -union cvmx_usbcx_gnptxfsiz { - u32 u32; - /** - * struct cvmx_usbcx_gnptxfsiz_s - * @nptxfdep: Non-Periodic TxFIFO Depth (NPTxFDep) - * This value is in terms of 32-bit words. - * Minimum value is 16 - * Maximum value is 32768 - * @nptxfstaddr: Non-Periodic Transmit RAM Start Address (NPTxFStAddr) - * This field contains the memory start address for Non-Periodic - * Transmit FIFO RAM. - */ - struct cvmx_usbcx_gnptxfsiz_s { - __BITFIELD_FIELD(u32 nptxfdep : 16, - __BITFIELD_FIELD(u32 nptxfstaddr : 16, - ;)) - } s; -}; - -/** - * cvmx_usbc#_gnptxsts - * - * Non-Periodic Transmit FIFO/Queue Status Register (GNPTXSTS) - * - * This read-only register contains the free space information for the - * Non-Periodic TxFIFO and the Non-Periodic Transmit Request Queue. - */ -union cvmx_usbcx_gnptxsts { - u32 u32; - /** - * struct cvmx_usbcx_gnptxsts_s - * @nptxqtop: Top of the Non-Periodic Transmit Request Queue (NPTxQTop) - * Entry in the Non-Periodic Tx Request Queue that is currently - * being processed by the MAC. - * * Bits [30:27]: Channel/endpoint number - * * Bits [26:25]: - * - 2'b00: IN/OUT token - * - 2'b01: Zero-length transmit packet (device IN/host OUT) - * - 2'b10: PING/CSPLIT token - * - 2'b11: Channel halt command - * * Bit [24]: Terminate (last entry for selected channel/endpoint) - * @nptxqspcavail: Non-Periodic Transmit Request Queue Space Available - * (NPTxQSpcAvail) - * Indicates the amount of free space available in the Non- - * Periodic Transmit Request Queue. This queue holds both IN - * and OUT requests in Host mode. Device mode has only IN - * requests. - * * 8'h0: Non-Periodic Transmit Request Queue is full - * * 8'h1: 1 location available - * * 8'h2: 2 locations available - * * n: n locations available (0..8) - * * Others: Reserved - * @nptxfspcavail: Non-Periodic TxFIFO Space Avail (NPTxFSpcAvail) - * Indicates the amount of free space available in the Non- - * Periodic TxFIFO. - * Values are in terms of 32-bit words. - * * 16'h0: Non-Periodic TxFIFO is full - * * 16'h1: 1 word available - * * 16'h2: 2 words available - * * 16'hn: n words available (where 0..32768) - * * 16'h8000: 32768 words available - * * Others: Reserved - */ - struct cvmx_usbcx_gnptxsts_s { - __BITFIELD_FIELD(u32 reserved_31_31 : 1, - __BITFIELD_FIELD(u32 nptxqtop : 7, - __BITFIELD_FIELD(u32 nptxqspcavail : 8, - __BITFIELD_FIELD(u32 nptxfspcavail : 16, - ;)))) - } s; -}; - -/** - * cvmx_usbc#_grstctl - * - * Core Reset Register (GRSTCTL) - * - * The application uses this register to reset various hardware features inside - * the core. - */ -union cvmx_usbcx_grstctl { - u32 u32; - /** - * struct cvmx_usbcx_grstctl_s - * @ahbidle: AHB Master Idle (AHBIdle) - * Indicates that the AHB Master State Machine is in the IDLE - * condition. - * @dmareq: DMA Request Signal (DMAReq) - * Indicates that the DMA request is in progress. Used for debug. - * @txfnum: TxFIFO Number (TxFNum) - * This is the FIFO number that must be flushed using the TxFIFO - * Flush bit. This field must not be changed until the core clears - * the TxFIFO Flush bit. - * * 5'h0: Non-Periodic TxFIFO flush - * * 5'h1: Periodic TxFIFO 1 flush in Device mode or Periodic - * TxFIFO flush in Host mode - * * 5'h2: Periodic TxFIFO 2 flush in Device mode - * - ... - * * 5'hF: Periodic TxFIFO 15 flush in Device mode - * * 5'h10: Flush all the Periodic and Non-Periodic TxFIFOs in the - * core - * @txfflsh: TxFIFO Flush (TxFFlsh) - * This bit selectively flushes a single or all transmit FIFOs, but - * cannot do so if the core is in the midst of a transaction. - * The application must only write this bit after checking that the - * core is neither writing to the TxFIFO nor reading from the - * TxFIFO. - * The application must wait until the core clears this bit before - * performing any operations. This bit takes 8 clocks (of phy_clk - * or hclk, whichever is slower) to clear. - * @rxfflsh: RxFIFO Flush (RxFFlsh) - * The application can flush the entire RxFIFO using this bit, but - * must first ensure that the core is not in the middle of a - * transaction. - * The application must only write to this bit after checking that - * the core is neither reading from the RxFIFO nor writing to the - * RxFIFO. - * The application must wait until the bit is cleared before - * performing any other operations. This bit will take 8 clocks - * (slowest of PHY or AHB clock) to clear. - * @intknqflsh: IN Token Sequence Learning Queue Flush (INTknQFlsh) - * The application writes this bit to flush the IN Token Sequence - * Learning Queue. - * @frmcntrrst: Host Frame Counter Reset (FrmCntrRst) - * The application writes this bit to reset the (micro)frame number - * counter inside the core. When the (micro)frame counter is reset, - * the subsequent SOF sent out by the core will have a - * (micro)frame number of 0. - * @hsftrst: HClk Soft Reset (HSftRst) - * The application uses this bit to flush the control logic in the - * AHB Clock domain. Only AHB Clock Domain pipelines are reset. - * * FIFOs are not flushed with this bit. - * * All state machines in the AHB clock domain are reset to the - * Idle state after terminating the transactions on the AHB, - * following the protocol. - * * CSR control bits used by the AHB clock domain state - * machines are cleared. - * * To clear this interrupt, status mask bits that control the - * interrupt status and are generated by the AHB clock domain - * state machine are cleared. - * * Because interrupt status bits are not cleared, the application - * can get the status of any core events that occurred after it set - * this bit. - * This is a self-clearing bit that the core clears after all - * necessary logic is reset in the core. This may take several - * clocks, depending on the core's current state. - * @csftrst: Core Soft Reset (CSftRst) - * Resets the hclk and phy_clock domains as follows: - * * Clears the interrupts and all the CSR registers except the - * following register bits: - * - PCGCCTL.RstPdwnModule - * - PCGCCTL.GateHclk - * - PCGCCTL.PwrClmp - * - PCGCCTL.StopPPhyLPwrClkSelclk - * - GUSBCFG.PhyLPwrClkSel - * - GUSBCFG.DDRSel - * - GUSBCFG.PHYSel - * - GUSBCFG.FSIntf - * - GUSBCFG.ULPI_UTMI_Sel - * - GUSBCFG.PHYIf - * - HCFG.FSLSPclkSel - * - DCFG.DevSpd - * * All module state machines (except the AHB Slave Unit) are - * reset to the IDLE state, and all the transmit FIFOs and the - * receive FIFO are flushed. - * * Any transactions on the AHB Master are terminated as soon - * as possible, after gracefully completing the last data phase of - * an AHB transfer. Any transactions on the USB are terminated - * immediately. - * The application can write to this bit any time it wants to reset - * the core. This is a self-clearing bit and the core clears this - * bit after all the necessary logic is reset in the core, which - * may take several clocks, depending on the current state of the - * core. Once this bit is cleared software should wait at least 3 - * PHY clocks before doing any access to the PHY domain - * (synchronization delay). Software should also should check that - * bit 31 of this register is 1 (AHB Master is IDLE) before - * starting any operation. - * Typically software reset is used during software development - * and also when you dynamically change the PHY selection bits - * in the USB configuration registers listed above. When you - * change the PHY, the corresponding clock for the PHY is - * selected and used in the PHY domain. Once a new clock is - * selected, the PHY domain has to be reset for proper operation. - */ - struct cvmx_usbcx_grstctl_s { - __BITFIELD_FIELD(u32 ahbidle : 1, - __BITFIELD_FIELD(u32 dmareq : 1, - __BITFIELD_FIELD(u32 reserved_11_29 : 19, - __BITFIELD_FIELD(u32 txfnum : 5, - __BITFIELD_FIELD(u32 txfflsh : 1, - __BITFIELD_FIELD(u32 rxfflsh : 1, - __BITFIELD_FIELD(u32 intknqflsh : 1, - __BITFIELD_FIELD(u32 frmcntrrst : 1, - __BITFIELD_FIELD(u32 hsftrst : 1, - __BITFIELD_FIELD(u32 csftrst : 1, - ;)))))))))) - } s; -}; - -/** - * cvmx_usbc#_grxfsiz - * - * Receive FIFO Size Register (GRXFSIZ) - * - * The application can program the RAM size that must be allocated to the - * RxFIFO. - */ -union cvmx_usbcx_grxfsiz { - u32 u32; - /** - * struct cvmx_usbcx_grxfsiz_s - * @rxfdep: RxFIFO Depth (RxFDep) - * This value is in terms of 32-bit words. - * * Minimum value is 16 - * * Maximum value is 32768 - */ - struct cvmx_usbcx_grxfsiz_s { - __BITFIELD_FIELD(u32 reserved_16_31 : 16, - __BITFIELD_FIELD(u32 rxfdep : 16, - ;)) - } s; -}; - -/** - * cvmx_usbc#_grxstsph - * - * Receive Status Read and Pop Register, Host Mode (GRXSTSPH) - * - * A read to the Receive Status Read and Pop register returns and additionally - * pops the top data entry out of the RxFIFO. - * This Description is only valid when the core is in Host Mode. For Device Mode - * use USBC_GRXSTSPD instead. - * NOTE: GRXSTSPH and GRXSTSPD are physically the same register and share the - * same offset in the O2P USB core. The offset difference shown in this - * document is for software clarity and is actually ignored by the - * hardware. - */ -union cvmx_usbcx_grxstsph { - u32 u32; - /** - * struct cvmx_usbcx_grxstsph_s - * @pktsts: Packet Status (PktSts) - * Indicates the status of the received packet - * * 4'b0010: IN data packet received - * * 4'b0011: IN transfer completed (triggers an interrupt) - * * 4'b0101: Data toggle error (triggers an interrupt) - * * 4'b0111: Channel halted (triggers an interrupt) - * * Others: Reserved - * @dpid: Data PID (DPID) - * * 2'b00: DATA0 - * * 2'b10: DATA1 - * * 2'b01: DATA2 - * * 2'b11: MDATA - * @bcnt: Byte Count (BCnt) - * Indicates the byte count of the received IN data packet - * @chnum: Channel Number (ChNum) - * Indicates the channel number to which the current received - * packet belongs. - */ - struct cvmx_usbcx_grxstsph_s { - __BITFIELD_FIELD(u32 reserved_21_31 : 11, - __BITFIELD_FIELD(u32 pktsts : 4, - __BITFIELD_FIELD(u32 dpid : 2, - __BITFIELD_FIELD(u32 bcnt : 11, - __BITFIELD_FIELD(u32 chnum : 4, - ;))))) - } s; -}; - -/** - * cvmx_usbc#_gusbcfg - * - * Core USB Configuration Register (GUSBCFG) - * - * This register can be used to configure the core after power-on or a changing - * to Host mode or Device mode. It contains USB and USB-PHY related - * configuration parameters. The application must program this register before - * starting any transactions on either the AHB or the USB. Do not make changes - * to this register after the initial programming. - */ -union cvmx_usbcx_gusbcfg { - u32 u32; - /** - * struct cvmx_usbcx_gusbcfg_s - * @otgi2csel: UTMIFS or I2C Interface Select (OtgI2CSel) - * This bit is always 0x0. - * @phylpwrclksel: PHY Low-Power Clock Select (PhyLPwrClkSel) - * Software should set this bit to 0x0. - * Selects either 480-MHz or 48-MHz (low-power) PHY mode. In - * FS and LS modes, the PHY can usually operate on a 48-MHz - * clock to save power. - * * 1'b0: 480-MHz Internal PLL clock - * * 1'b1: 48-MHz External Clock - * In 480 MHz mode, the UTMI interface operates at either 60 or - * 30-MHz, depending upon whether 8- or 16-bit data width is - * selected. In 48-MHz mode, the UTMI interface operates at 48 - * MHz in FS mode and at either 48 or 6 MHz in LS mode - * (depending on the PHY vendor). - * This bit drives the utmi_fsls_low_power core output signal, and - * is valid only for UTMI+ PHYs. - * @usbtrdtim: USB Turnaround Time (USBTrdTim) - * Sets the turnaround time in PHY clocks. - * Specifies the response time for a MAC request to the Packet - * FIFO Controller (PFC) to fetch data from the DFIFO (SPRAM). - * This must be programmed to 0x5. - * @hnpcap: HNP-Capable (HNPCap) - * This bit is always 0x0. - * @srpcap: SRP-Capable (SRPCap) - * This bit is always 0x0. - * @ddrsel: ULPI DDR Select (DDRSel) - * Software should set this bit to 0x0. - * @physel: USB 2.0 High-Speed PHY or USB 1.1 Full-Speed Serial - * Software should set this bit to 0x0. - * @fsintf: Full-Speed Serial Interface Select (FSIntf) - * Software should set this bit to 0x0. - * @ulpi_utmi_sel: ULPI or UTMI+ Select (ULPI_UTMI_Sel) - * This bit is always 0x0. - * @phyif: PHY Interface (PHYIf) - * This bit is always 0x1. - * @toutcal: HS/FS Timeout Calibration (TOutCal) - * The number of PHY clocks that the application programs in this - * field is added to the high-speed/full-speed interpacket timeout - * duration in the core to account for any additional delays - * introduced by the PHY. This may be required, since the delay - * introduced by the PHY in generating the linestate condition may - * vary from one PHY to another. - * The USB standard timeout value for high-speed operation is - * 736 to 816 (inclusive) bit times. The USB standard timeout - * value for full-speed operation is 16 to 18 (inclusive) bit - * times. The application must program this field based on the - * speed of enumeration. The number of bit times added per PHY - * clock are: - * High-speed operation: - * * One 30-MHz PHY clock = 16 bit times - * * One 60-MHz PHY clock = 8 bit times - * Full-speed operation: - * * One 30-MHz PHY clock = 0.4 bit times - * * One 60-MHz PHY clock = 0.2 bit times - * * One 48-MHz PHY clock = 0.25 bit times - */ - struct cvmx_usbcx_gusbcfg_s { - __BITFIELD_FIELD(u32 reserved_17_31 : 15, - __BITFIELD_FIELD(u32 otgi2csel : 1, - __BITFIELD_FIELD(u32 phylpwrclksel : 1, - __BITFIELD_FIELD(u32 reserved_14_14 : 1, - __BITFIELD_FIELD(u32 usbtrdtim : 4, - __BITFIELD_FIELD(u32 hnpcap : 1, - __BITFIELD_FIELD(u32 srpcap : 1, - __BITFIELD_FIELD(u32 ddrsel : 1, - __BITFIELD_FIELD(u32 physel : 1, - __BITFIELD_FIELD(u32 fsintf : 1, - __BITFIELD_FIELD(u32 ulpi_utmi_sel : 1, - __BITFIELD_FIELD(u32 phyif : 1, - __BITFIELD_FIELD(u32 toutcal : 3, - ;))))))))))))) - } s; -}; - -/** - * cvmx_usbc#_haint - * - * Host All Channels Interrupt Register (HAINT) - * - * When a significant event occurs on a channel, the Host All Channels Interrupt - * register interrupts the application using the Host Channels Interrupt bit of - * the Core Interrupt register (GINTSTS.HChInt). This is shown in Interrupt. - * There is one interrupt bit per channel, up to a maximum of 16 bits. Bits in - * this register are set and cleared when the application sets and clears bits - * in the corresponding Host Channel-n Interrupt register. - */ -union cvmx_usbcx_haint { - u32 u32; - /** - * struct cvmx_usbcx_haint_s - * @haint: Channel Interrupts (HAINT) - * One bit per channel: Bit 0 for Channel 0, bit 15 for Channel 15 - */ - struct cvmx_usbcx_haint_s { - __BITFIELD_FIELD(u32 reserved_16_31 : 16, - __BITFIELD_FIELD(u32 haint : 16, - ;)) - } s; -}; - -/** - * cvmx_usbc#_haintmsk - * - * Host All Channels Interrupt Mask Register (HAINTMSK) - * - * The Host All Channel Interrupt Mask register works with the Host All Channel - * Interrupt register to interrupt the application when an event occurs on a - * channel. There is one interrupt mask bit per channel, up to a maximum of 16 - * bits. - * Mask interrupt: 1'b0 Unmask interrupt: 1'b1 - */ -union cvmx_usbcx_haintmsk { - u32 u32; - /** - * struct cvmx_usbcx_haintmsk_s - * @haintmsk: Channel Interrupt Mask (HAINTMsk) - * One bit per channel: Bit 0 for channel 0, bit 15 for channel 15 - */ - struct cvmx_usbcx_haintmsk_s { - __BITFIELD_FIELD(u32 reserved_16_31 : 16, - __BITFIELD_FIELD(u32 haintmsk : 16, - ;)) - } s; -}; - -/** - * cvmx_usbc#_hcchar# - * - * Host Channel-n Characteristics Register (HCCHAR) - * - */ -union cvmx_usbcx_hccharx { - u32 u32; - /** - * struct cvmx_usbcx_hccharx_s - * @chena: Channel Enable (ChEna) - * This field is set by the application and cleared by the OTG - * host. - * * 1'b0: Channel disabled - * * 1'b1: Channel enabled - * @chdis: Channel Disable (ChDis) - * The application sets this bit to stop transmitting/receiving - * data on a channel, even before the transfer for that channel is - * complete. The application must wait for the Channel Disabled - * interrupt before treating the channel as disabled. - * @oddfrm: Odd Frame (OddFrm) - * This field is set (reset) by the application to indicate that - * the OTG host must perform a transfer in an odd (micro)frame. - * This field is applicable for only periodic (isochronous and - * interrupt) transactions. - * * 1'b0: Even (micro)frame - * * 1'b1: Odd (micro)frame - * @devaddr: Device Address (DevAddr) - * This field selects the specific device serving as the data - * source or sink. - * @ec: Multi Count (MC) / Error Count (EC) - * When the Split Enable bit of the Host Channel-n Split Control - * register (HCSPLTn.SpltEna) is reset (1'b0), this field indicates - * to the host the number of transactions that should be executed - * per microframe for this endpoint. - * * 2'b00: Reserved. This field yields undefined results. - * * 2'b01: 1 transaction - * * 2'b10: 2 transactions to be issued for this endpoint per - * microframe - * * 2'b11: 3 transactions to be issued for this endpoint per - * microframe - * When HCSPLTn.SpltEna is set (1'b1), this field indicates the - * number of immediate retries to be performed for a periodic split - * transactions on transaction errors. This field must be set to at - * least 2'b01. - * @eptype: Endpoint Type (EPType) - * Indicates the transfer type selected. - * * 2'b00: Control - * * 2'b01: Isochronous - * * 2'b10: Bulk - * * 2'b11: Interrupt - * @lspddev: Low-Speed Device (LSpdDev) - * This field is set by the application to indicate that this - * channel is communicating to a low-speed device. - * @epdir: Endpoint Direction (EPDir) - * Indicates whether the transaction is IN or OUT. - * * 1'b0: OUT - * * 1'b1: IN - * @epnum: Endpoint Number (EPNum) - * Indicates the endpoint number on the device serving as the - * data source or sink. - * @mps: Maximum Packet Size (MPS) - * Indicates the maximum packet size of the associated endpoint. - */ - struct cvmx_usbcx_hccharx_s { - __BITFIELD_FIELD(u32 chena : 1, - __BITFIELD_FIELD(u32 chdis : 1, - __BITFIELD_FIELD(u32 oddfrm : 1, - __BITFIELD_FIELD(u32 devaddr : 7, - __BITFIELD_FIELD(u32 ec : 2, - __BITFIELD_FIELD(u32 eptype : 2, - __BITFIELD_FIELD(u32 lspddev : 1, - __BITFIELD_FIELD(u32 reserved_16_16 : 1, - __BITFIELD_FIELD(u32 epdir : 1, - __BITFIELD_FIELD(u32 epnum : 4, - __BITFIELD_FIELD(u32 mps : 11, - ;))))))))))) - } s; -}; - -/** - * cvmx_usbc#_hcfg - * - * Host Configuration Register (HCFG) - * - * This register configures the core after power-on. Do not make changes to this - * register after initializing the host. - */ -union cvmx_usbcx_hcfg { - u32 u32; - /** - * struct cvmx_usbcx_hcfg_s - * @fslssupp: FS- and LS-Only Support (FSLSSupp) - * The application uses this bit to control the core's enumeration - * speed. Using this bit, the application can make the core - * enumerate as a FS host, even if the connected device supports - * HS traffic. Do not make changes to this field after initial - * programming. - * * 1'b0: HS/FS/LS, based on the maximum speed supported by - * the connected device - * * 1'b1: FS/LS-only, even if the connected device can support HS - * @fslspclksel: FS/LS PHY Clock Select (FSLSPclkSel) - * When the core is in FS Host mode - * * 2'b00: PHY clock is running at 30/60 MHz - * * 2'b01: PHY clock is running at 48 MHz - * * Others: Reserved - * When the core is in LS Host mode - * * 2'b00: PHY clock is running at 30/60 MHz. When the - * UTMI+/ULPI PHY Low Power mode is not selected, use - * 30/60 MHz. - * * 2'b01: PHY clock is running at 48 MHz. When the UTMI+ - * PHY Low Power mode is selected, use 48MHz if the PHY - * supplies a 48 MHz clock during LS mode. - * * 2'b10: PHY clock is running at 6 MHz. In USB 1.1 FS mode, - * use 6 MHz when the UTMI+ PHY Low Power mode is - * selected and the PHY supplies a 6 MHz clock during LS - * mode. If you select a 6 MHz clock during LS mode, you must - * do a soft reset. - * * 2'b11: Reserved - */ - struct cvmx_usbcx_hcfg_s { - __BITFIELD_FIELD(u32 reserved_3_31 : 29, - __BITFIELD_FIELD(u32 fslssupp : 1, - __BITFIELD_FIELD(u32 fslspclksel : 2, - ;))) - } s; -}; - -/** - * cvmx_usbc#_hcint# - * - * Host Channel-n Interrupt Register (HCINT) - * - * This register indicates the status of a channel with respect to USB- and - * AHB-related events. The application must read this register when the Host - * Channels Interrupt bit of the Core Interrupt register (GINTSTS.HChInt) is - * set. Before the application can read this register, it must first read - * the Host All Channels Interrupt (HAINT) register to get the exact channel - * number for the Host Channel-n Interrupt register. The application must clear - * the appropriate bit in this register to clear the corresponding bits in the - * HAINT and GINTSTS registers. - */ -union cvmx_usbcx_hcintx { - u32 u32; - /** - * struct cvmx_usbcx_hcintx_s - * @datatglerr: Data Toggle Error (DataTglErr) - * @frmovrun: Frame Overrun (FrmOvrun) - * @bblerr: Babble Error (BblErr) - * @xacterr: Transaction Error (XactErr) - * @nyet: NYET Response Received Interrupt (NYET) - * @ack: ACK Response Received Interrupt (ACK) - * @nak: NAK Response Received Interrupt (NAK) - * @stall: STALL Response Received Interrupt (STALL) - * @ahberr: This bit is always 0x0. - * @chhltd: Channel Halted (ChHltd) - * Indicates the transfer completed abnormally either because of - * any USB transaction error or in response to disable request by - * the application. - * @xfercompl: Transfer Completed (XferCompl) - * Transfer completed normally without any errors. - */ - struct cvmx_usbcx_hcintx_s { - __BITFIELD_FIELD(u32 reserved_11_31 : 21, - __BITFIELD_FIELD(u32 datatglerr : 1, - __BITFIELD_FIELD(u32 frmovrun : 1, - __BITFIELD_FIELD(u32 bblerr : 1, - __BITFIELD_FIELD(u32 xacterr : 1, - __BITFIELD_FIELD(u32 nyet : 1, - __BITFIELD_FIELD(u32 ack : 1, - __BITFIELD_FIELD(u32 nak : 1, - __BITFIELD_FIELD(u32 stall : 1, - __BITFIELD_FIELD(u32 ahberr : 1, - __BITFIELD_FIELD(u32 chhltd : 1, - __BITFIELD_FIELD(u32 xfercompl : 1, - ;)))))))))))) - } s; -}; - -/** - * cvmx_usbc#_hcintmsk# - * - * Host Channel-n Interrupt Mask Register (HCINTMSKn) - * - * This register reflects the mask for each channel status described in the - * previous section. - * Mask interrupt: 1'b0 Unmask interrupt: 1'b1 - */ -union cvmx_usbcx_hcintmskx { - u32 u32; - /** - * struct cvmx_usbcx_hcintmskx_s - * @datatglerrmsk: Data Toggle Error Mask (DataTglErrMsk) - * @frmovrunmsk: Frame Overrun Mask (FrmOvrunMsk) - * @bblerrmsk: Babble Error Mask (BblErrMsk) - * @xacterrmsk: Transaction Error Mask (XactErrMsk) - * @nyetmsk: NYET Response Received Interrupt Mask (NyetMsk) - * @ackmsk: ACK Response Received Interrupt Mask (AckMsk) - * @nakmsk: NAK Response Received Interrupt Mask (NakMsk) - * @stallmsk: STALL Response Received Interrupt Mask (StallMsk) - * @ahberrmsk: AHB Error Mask (AHBErrMsk) - * @chhltdmsk: Channel Halted Mask (ChHltdMsk) - * @xfercomplmsk: Transfer Completed Mask (XferComplMsk) - */ - struct cvmx_usbcx_hcintmskx_s { - __BITFIELD_FIELD(u32 reserved_11_31 : 21, - __BITFIELD_FIELD(u32 datatglerrmsk : 1, - __BITFIELD_FIELD(u32 frmovrunmsk : 1, - __BITFIELD_FIELD(u32 bblerrmsk : 1, - __BITFIELD_FIELD(u32 xacterrmsk : 1, - __BITFIELD_FIELD(u32 nyetmsk : 1, - __BITFIELD_FIELD(u32 ackmsk : 1, - __BITFIELD_FIELD(u32 nakmsk : 1, - __BITFIELD_FIELD(u32 stallmsk : 1, - __BITFIELD_FIELD(u32 ahberrmsk : 1, - __BITFIELD_FIELD(u32 chhltdmsk : 1, - __BITFIELD_FIELD(u32 xfercomplmsk : 1, - ;)))))))))))) - } s; -}; - -/** - * cvmx_usbc#_hcsplt# - * - * Host Channel-n Split Control Register (HCSPLT) - * - */ -union cvmx_usbcx_hcspltx { - u32 u32; - /** - * struct cvmx_usbcx_hcspltx_s - * @spltena: Split Enable (SpltEna) - * The application sets this field to indicate that this channel is - * enabled to perform split transactions. - * @compsplt: Do Complete Split (CompSplt) - * The application sets this field to request the OTG host to - * perform a complete split transaction. - * @xactpos: Transaction Position (XactPos) - * This field is used to determine whether to send all, first, - * middle, or last payloads with each OUT transaction. - * * 2'b11: All. This is the entire data payload is of this - * transaction (which is less than or equal to 188 bytes). - * * 2'b10: Begin. This is the first data payload of this - * transaction (which is larger than 188 bytes). - * * 2'b00: Mid. This is the middle payload of this transaction - * (which is larger than 188 bytes). - * * 2'b01: End. This is the last payload of this transaction - * (which is larger than 188 bytes). - * @hubaddr: Hub Address (HubAddr) - * This field holds the device address of the transaction - * translator's hub. - * @prtaddr: Port Address (PrtAddr) - * This field is the port number of the recipient transaction - * translator. - */ - struct cvmx_usbcx_hcspltx_s { - __BITFIELD_FIELD(u32 spltena : 1, - __BITFIELD_FIELD(u32 reserved_17_30 : 14, - __BITFIELD_FIELD(u32 compsplt : 1, - __BITFIELD_FIELD(u32 xactpos : 2, - __BITFIELD_FIELD(u32 hubaddr : 7, - __BITFIELD_FIELD(u32 prtaddr : 7, - ;)))))) - } s; -}; - -/** - * cvmx_usbc#_hctsiz# - * - * Host Channel-n Transfer Size Register (HCTSIZ) - * - */ -union cvmx_usbcx_hctsizx { - u32 u32; - /** - * struct cvmx_usbcx_hctsizx_s - * @dopng: Do Ping (DoPng) - * Setting this field to 1 directs the host to do PING protocol. - * @pid: PID (Pid) - * The application programs this field with the type of PID to use - * for the initial transaction. The host will maintain this field - * for the rest of the transfer. - * * 2'b00: DATA0 - * * 2'b01: DATA2 - * * 2'b10: DATA1 - * * 2'b11: MDATA (non-control)/SETUP (control) - * @pktcnt: Packet Count (PktCnt) - * This field is programmed by the application with the expected - * number of packets to be transmitted (OUT) or received (IN). - * The host decrements this count on every successful - * transmission or reception of an OUT/IN packet. Once this count - * reaches zero, the application is interrupted to indicate normal - * completion. - * @xfersize: Transfer Size (XferSize) - * For an OUT, this field is the number of data bytes the host will - * send during the transfer. - * For an IN, this field is the buffer size that the application - * has reserved for the transfer. The application is expected to - * program this field as an integer multiple of the maximum packet - * size for IN transactions (periodic and non-periodic). - */ - struct cvmx_usbcx_hctsizx_s { - __BITFIELD_FIELD(u32 dopng : 1, - __BITFIELD_FIELD(u32 pid : 2, - __BITFIELD_FIELD(u32 pktcnt : 10, - __BITFIELD_FIELD(u32 xfersize : 19, - ;)))) - } s; -}; - -/** - * cvmx_usbc#_hfir - * - * Host Frame Interval Register (HFIR) - * - * This register stores the frame interval information for the current speed to - * which the O2P USB core has enumerated. - */ -union cvmx_usbcx_hfir { - u32 u32; - /** - * struct cvmx_usbcx_hfir_s - * @frint: Frame Interval (FrInt) - * The value that the application programs to this field specifies - * the interval between two consecutive SOFs (FS) or micro- - * SOFs (HS) or Keep-Alive tokens (HS). This field contains the - * number of PHY clocks that constitute the required frame - * interval. The default value set in this field for a FS operation - * when the PHY clock frequency is 60 MHz. The application can - * write a value to this register only after the Port Enable bit of - * the Host Port Control and Status register (HPRT.PrtEnaPort) - * has been set. If no value is programmed, the core calculates - * the value based on the PHY clock specified in the FS/LS PHY - * Clock Select field of the Host Configuration register - * (HCFG.FSLSPclkSel). Do not change the value of this field - * after the initial configuration. - * * 125 us (PHY clock frequency for HS) - * * 1 ms (PHY clock frequency for FS/LS) - */ - struct cvmx_usbcx_hfir_s { - __BITFIELD_FIELD(u32 reserved_16_31 : 16, - __BITFIELD_FIELD(u32 frint : 16, - ;)) - } s; -}; - -/** - * cvmx_usbc#_hfnum - * - * Host Frame Number/Frame Time Remaining Register (HFNUM) - * - * This register indicates the current frame number. - * It also indicates the time remaining (in terms of the number of PHY clocks) - * in the current (micro)frame. - */ -union cvmx_usbcx_hfnum { - u32 u32; - /** - * struct cvmx_usbcx_hfnum_s - * @frrem: Frame Time Remaining (FrRem) - * Indicates the amount of time remaining in the current - * microframe (HS) or frame (FS/LS), in terms of PHY clocks. - * This field decrements on each PHY clock. When it reaches - * zero, this field is reloaded with the value in the Frame - * Interval register and a new SOF is transmitted on the USB. - * @frnum: Frame Number (FrNum) - * This field increments when a new SOF is transmitted on the - * USB, and is reset to 0 when it reaches 16'h3FFF. - */ - struct cvmx_usbcx_hfnum_s { - __BITFIELD_FIELD(u32 frrem : 16, - __BITFIELD_FIELD(u32 frnum : 16, - ;)) - } s; -}; - -/** - * cvmx_usbc#_hprt - * - * Host Port Control and Status Register (HPRT) - * - * This register is available in both Host and Device modes. - * Currently, the OTG Host supports only one port. - * A single register holds USB port-related information such as USB reset, - * enable, suspend, resume, connect status, and test mode for each port. The - * R_SS_WC bits in this register can trigger an interrupt to the application - * through the Host Port Interrupt bit of the Core Interrupt register - * (GINTSTS.PrtInt). On a Port Interrupt, the application must read this - * register and clear the bit that caused the interrupt. For the R_SS_WC bits, - * the application must write a 1 to the bit to clear the interrupt. - */ -union cvmx_usbcx_hprt { - u32 u32; - /** - * struct cvmx_usbcx_hprt_s - * @prtspd: Port Speed (PrtSpd) - * Indicates the speed of the device attached to this port. - * * 2'b00: High speed - * * 2'b01: Full speed - * * 2'b10: Low speed - * * 2'b11: Reserved - * @prttstctl: Port Test Control (PrtTstCtl) - * The application writes a nonzero value to this field to put - * the port into a Test mode, and the corresponding pattern is - * signaled on the port. - * * 4'b0000: Test mode disabled - * * 4'b0001: Test_J mode - * * 4'b0010: Test_K mode - * * 4'b0011: Test_SE0_NAK mode - * * 4'b0100: Test_Packet mode - * * 4'b0101: Test_Force_Enable - * * Others: Reserved - * PrtSpd must be zero (i.e. the interface must be in high-speed - * mode) to use the PrtTstCtl test modes. - * @prtpwr: Port Power (PrtPwr) - * The application uses this field to control power to this port, - * and the core clears this bit on an overcurrent condition. - * * 1'b0: Power off - * * 1'b1: Power on - * @prtlnsts: Port Line Status (PrtLnSts) - * Indicates the current logic level USB data lines - * * Bit [10]: Logic level of D- - * * Bit [11]: Logic level of D+ - * @prtrst: Port Reset (PrtRst) - * When the application sets this bit, a reset sequence is - * started on this port. The application must time the reset - * period and clear this bit after the reset sequence is - * complete. - * * 1'b0: Port not in reset - * * 1'b1: Port in reset - * The application must leave this bit set for at least a - * minimum duration mentioned below to start a reset on the - * port. The application can leave it set for another 10 ms in - * addition to the required minimum duration, before clearing - * the bit, even though there is no maximum limit set by the - * USB standard. - * * High speed: 50 ms - * * Full speed/Low speed: 10 ms - * @prtsusp: Port Suspend (PrtSusp) - * The application sets this bit to put this port in Suspend - * mode. The core only stops sending SOFs when this is set. - * To stop the PHY clock, the application must set the Port - * Clock Stop bit, which will assert the suspend input pin of - * the PHY. - * The read value of this bit reflects the current suspend - * status of the port. This bit is cleared by the core after a - * remote wakeup signal is detected or the application sets - * the Port Reset bit or Port Resume bit in this register or the - * Resume/Remote Wakeup Detected Interrupt bit or - * Disconnect Detected Interrupt bit in the Core Interrupt - * register (GINTSTS.WkUpInt or GINTSTS.DisconnInt, - * respectively). - * * 1'b0: Port not in Suspend mode - * * 1'b1: Port in Suspend mode - * @prtres: Port Resume (PrtRes) - * The application sets this bit to drive resume signaling on - * the port. The core continues to drive the resume signal - * until the application clears this bit. - * If the core detects a USB remote wakeup sequence, as - * indicated by the Port Resume/Remote Wakeup Detected - * Interrupt bit of the Core Interrupt register - * (GINTSTS.WkUpInt), the core starts driving resume - * signaling without application intervention and clears this bit - * when it detects a disconnect condition. The read value of - * this bit indicates whether the core is currently driving - * resume signaling. - * * 1'b0: No resume driven - * * 1'b1: Resume driven - * @prtovrcurrchng: Port Overcurrent Change (PrtOvrCurrChng) - * The core sets this bit when the status of the Port - * Overcurrent Active bit (bit 4) in this register changes. - * @prtovrcurract: Port Overcurrent Active (PrtOvrCurrAct) - * Indicates the overcurrent condition of the port. - * * 1'b0: No overcurrent condition - * * 1'b1: Overcurrent condition - * @prtenchng: Port Enable/Disable Change (PrtEnChng) - * The core sets this bit when the status of the Port Enable bit - * [2] of this register changes. - * @prtena: Port Enable (PrtEna) - * A port is enabled only by the core after a reset sequence, - * and is disabled by an overcurrent condition, a disconnect - * condition, or by the application clearing this bit. The - * application cannot set this bit by a register write. It can only - * clear it to disable the port. This bit does not trigger any - * interrupt to the application. - * * 1'b0: Port disabled - * * 1'b1: Port enabled - * @prtconndet: Port Connect Detected (PrtConnDet) - * The core sets this bit when a device connection is detected - * to trigger an interrupt to the application using the Host Port - * Interrupt bit of the Core Interrupt register (GINTSTS.PrtInt). - * The application must write a 1 to this bit to clear the - * interrupt. - * @prtconnsts: Port Connect Status (PrtConnSts) - * * 0: No device is attached to the port. - * * 1: A device is attached to the port. - */ - struct cvmx_usbcx_hprt_s { - __BITFIELD_FIELD(u32 reserved_19_31 : 13, - __BITFIELD_FIELD(u32 prtspd : 2, - __BITFIELD_FIELD(u32 prttstctl : 4, - __BITFIELD_FIELD(u32 prtpwr : 1, - __BITFIELD_FIELD(u32 prtlnsts : 2, - __BITFIELD_FIELD(u32 reserved_9_9 : 1, - __BITFIELD_FIELD(u32 prtrst : 1, - __BITFIELD_FIELD(u32 prtsusp : 1, - __BITFIELD_FIELD(u32 prtres : 1, - __BITFIELD_FIELD(u32 prtovrcurrchng : 1, - __BITFIELD_FIELD(u32 prtovrcurract : 1, - __BITFIELD_FIELD(u32 prtenchng : 1, - __BITFIELD_FIELD(u32 prtena : 1, - __BITFIELD_FIELD(u32 prtconndet : 1, - __BITFIELD_FIELD(u32 prtconnsts : 1, - ;))))))))))))))) - } s; -}; - -/** - * cvmx_usbc#_hptxfsiz - * - * Host Periodic Transmit FIFO Size Register (HPTXFSIZ) - * - * This register holds the size and the memory start address of the Periodic - * TxFIFO, as shown in Figures 310 and 311. - */ -union cvmx_usbcx_hptxfsiz { - u32 u32; - /** - * struct cvmx_usbcx_hptxfsiz_s - * @ptxfsize: Host Periodic TxFIFO Depth (PTxFSize) - * This value is in terms of 32-bit words. - * * Minimum value is 16 - * * Maximum value is 32768 - * @ptxfstaddr: Host Periodic TxFIFO Start Address (PTxFStAddr) - */ - struct cvmx_usbcx_hptxfsiz_s { - __BITFIELD_FIELD(u32 ptxfsize : 16, - __BITFIELD_FIELD(u32 ptxfstaddr : 16, - ;)) - } s; -}; - -/** - * cvmx_usbc#_hptxsts - * - * Host Periodic Transmit FIFO/Queue Status Register (HPTXSTS) - * - * This read-only register contains the free space information for the Periodic - * TxFIFO and the Periodic Transmit Request Queue - */ -union cvmx_usbcx_hptxsts { - u32 u32; - /** - * struct cvmx_usbcx_hptxsts_s - * @ptxqtop: Top of the Periodic Transmit Request Queue (PTxQTop) - * This indicates the entry in the Periodic Tx Request Queue that - * is currently being processes by the MAC. - * This register is used for debugging. - * * Bit [31]: Odd/Even (micro)frame - * - 1'b0: send in even (micro)frame - * - 1'b1: send in odd (micro)frame - * * Bits [30:27]: Channel/endpoint number - * * Bits [26:25]: Type - * - 2'b00: IN/OUT - * - 2'b01: Zero-length packet - * - 2'b10: CSPLIT - * - 2'b11: Disable channel command - * * Bit [24]: Terminate (last entry for the selected - * channel/endpoint) - * @ptxqspcavail: Periodic Transmit Request Queue Space Available - * (PTxQSpcAvail) - * Indicates the number of free locations available to be written - * in the Periodic Transmit Request Queue. This queue holds both - * IN and OUT requests. - * * 8'h0: Periodic Transmit Request Queue is full - * * 8'h1: 1 location available - * * 8'h2: 2 locations available - * * n: n locations available (0..8) - * * Others: Reserved - * @ptxfspcavail: Periodic Transmit Data FIFO Space Available - * (PTxFSpcAvail) - * Indicates the number of free locations available to be written - * to in the Periodic TxFIFO. - * Values are in terms of 32-bit words - * * 16'h0: Periodic TxFIFO is full - * * 16'h1: 1 word available - * * 16'h2: 2 words available - * * 16'hn: n words available (where 0..32768) - * * 16'h8000: 32768 words available - * * Others: Reserved - */ - struct cvmx_usbcx_hptxsts_s { - __BITFIELD_FIELD(u32 ptxqtop : 8, - __BITFIELD_FIELD(u32 ptxqspcavail : 8, - __BITFIELD_FIELD(u32 ptxfspcavail : 16, - ;))) - } s; -}; - -/** - * cvmx_usbn#_clk_ctl - * - * USBN_CLK_CTL = USBN's Clock Control - * - * This register is used to control the frequency of the hclk and the - * hreset and phy_rst signals. - */ -union cvmx_usbnx_clk_ctl { - u64 u64; - /** - * struct cvmx_usbnx_clk_ctl_s - * @divide2: The 'hclk' used by the USB subsystem is derived - * from the eclk. - * Also see the field DIVIDE. DIVIDE2<1> must currently - * be zero because it is not implemented, so the maximum - * ratio of eclk/hclk is currently 16. - * The actual divide number for hclk is: - * (DIVIDE2 + 1) * (DIVIDE + 1) - * @hclk_rst: When this field is '0' the HCLK-DIVIDER used to - * generate the hclk in the USB Subsystem is held - * in reset. This bit must be set to '0' before - * changing the value os DIVIDE in this register. - * The reset to the HCLK_DIVIDERis also asserted - * when core reset is asserted. - * @p_x_on: Force USB-PHY on during suspend. - * '1' USB-PHY XO block is powered-down during - * suspend. - * '0' USB-PHY XO block is powered-up during - * suspend. - * The value of this field must be set while POR is - * active. - * @p_rtype: PHY reference clock type - * On CN50XX/CN52XX/CN56XX the values are: - * '0' The USB-PHY uses a 12MHz crystal as a clock source - * at the USB_XO and USB_XI pins. - * '1' Reserved. - * '2' The USB_PHY uses 12/24/48MHz 2.5V board clock at the - * USB_XO pin. USB_XI should be tied to ground in this - * case. - * '3' Reserved. - * On CN3xxx bits 14 and 15 are p_xenbn and p_rclk and values are: - * '0' Reserved. - * '1' Reserved. - * '2' The PHY PLL uses the XO block output as a reference. - * The XO block uses an external clock supplied on the - * XO pin. USB_XI should be tied to ground for this - * usage. - * '3' The XO block uses the clock from a crystal. - * @p_com_on: '0' Force USB-PHY XO Bias, Bandgap and PLL to - * remain powered in Suspend Mode. - * '1' The USB-PHY XO Bias, Bandgap and PLL are - * powered down in suspend mode. - * The value of this field must be set while POR is - * active. - * @p_c_sel: Phy clock speed select. - * Selects the reference clock / crystal frequency. - * '11': Reserved - * '10': 48 MHz (reserved when a crystal is used) - * '01': 24 MHz (reserved when a crystal is used) - * '00': 12 MHz - * The value of this field must be set while POR is - * active. - * NOTE: if a crystal is used as a reference clock, - * this field must be set to 12 MHz. - * @cdiv_byp: Used to enable the bypass input to the USB_CLK_DIV. - * @sd_mode: Scaledown mode for the USBC. Control timing events - * in the USBC, for normal operation this must be '0'. - * @s_bist: Starts bist on the hclk memories, during the '0' - * to '1' transition. - * @por: Power On Reset for the PHY. - * Resets all the PHYS registers and state machines. - * @enable: When '1' allows the generation of the hclk. When - * '0' the hclk will not be generated. SEE DIVIDE - * field of this register. - * @prst: When this field is '0' the reset associated with - * the phy_clk functionality in the USB Subsystem is - * help in reset. This bit should not be set to '1' - * until the time it takes 6 clocks (hclk or phy_clk, - * whichever is slower) has passed. Under normal - * operation once this bit is set to '1' it should not - * be set to '0'. - * @hrst: When this field is '0' the reset associated with - * the hclk functioanlity in the USB Subsystem is - * held in reset.This bit should not be set to '1' - * until 12ms after phy_clk is stable. Under normal - * operation, once this bit is set to '1' it should - * not be set to '0'. - * @divide: The frequency of 'hclk' used by the USB subsystem - * is the eclk frequency divided by the value of - * (DIVIDE2 + 1) * (DIVIDE + 1), also see the field - * DIVIDE2 of this register. - * The hclk frequency should be less than 125Mhz. - * After writing a value to this field the SW should - * read the field for the value written. - * The ENABLE field of this register should not be set - * until AFTER this field is set and then read. - */ - struct cvmx_usbnx_clk_ctl_s { - __BITFIELD_FIELD(u64 reserved_20_63 : 44, - __BITFIELD_FIELD(u64 divide2 : 2, - __BITFIELD_FIELD(u64 hclk_rst : 1, - __BITFIELD_FIELD(u64 p_x_on : 1, - __BITFIELD_FIELD(u64 p_rtype : 2, - __BITFIELD_FIELD(u64 p_com_on : 1, - __BITFIELD_FIELD(u64 p_c_sel : 2, - __BITFIELD_FIELD(u64 cdiv_byp : 1, - __BITFIELD_FIELD(u64 sd_mode : 2, - __BITFIELD_FIELD(u64 s_bist : 1, - __BITFIELD_FIELD(u64 por : 1, - __BITFIELD_FIELD(u64 enable : 1, - __BITFIELD_FIELD(u64 prst : 1, - __BITFIELD_FIELD(u64 hrst : 1, - __BITFIELD_FIELD(u64 divide : 3, - ;))))))))))))))) - } s; -}; - -/** - * cvmx_usbn#_usbp_ctl_status - * - * USBN_USBP_CTL_STATUS = USBP Control And Status Register - * - * Contains general control and status information for the USBN block. - */ -union cvmx_usbnx_usbp_ctl_status { - u64 u64; - /** - * struct cvmx_usbnx_usbp_ctl_status_s - * @txrisetune: HS Transmitter Rise/Fall Time Adjustment - * @txvreftune: HS DC Voltage Level Adjustment - * @txfslstune: FS/LS Source Impedance Adjustment - * @txhsxvtune: Transmitter High-Speed Crossover Adjustment - * @sqrxtune: Squelch Threshold Adjustment - * @compdistune: Disconnect Threshold Adjustment - * @otgtune: VBUS Valid Threshold Adjustment - * @otgdisable: OTG Block Disable - * @portreset: Per_Port Reset - * @drvvbus: Drive VBUS - * @lsbist: Low-Speed BIST Enable. - * @fsbist: Full-Speed BIST Enable. - * @hsbist: High-Speed BIST Enable. - * @bist_done: PHY Bist Done. - * Asserted at the end of the PHY BIST sequence. - * @bist_err: PHY Bist Error. - * Indicates an internal error was detected during - * the BIST sequence. - * @tdata_out: PHY Test Data Out. - * Presents either internally generated signals or - * test register contents, based upon the value of - * test_data_out_sel. - * @siddq: Drives the USBP (USB-PHY) SIDDQ input. - * Normally should be set to zero. - * When customers have no intent to use USB PHY - * interface, they should: - * - still provide 3.3V to USB_VDD33, and - * - tie USB_REXT to 3.3V supply, and - * - set USBN*_USBP_CTL_STATUS[SIDDQ]=1 - * @txpreemphasistune: HS Transmitter Pre-Emphasis Enable - * @dma_bmode: When set to 1 the L2C DMA address will be updated - * with byte-counts between packets. When set to 0 - * the L2C DMA address is incremented to the next - * 4-byte aligned address after adding byte-count. - * @usbc_end: Bigendian input to the USB Core. This should be - * set to '0' for operation. - * @usbp_bist: PHY, This is cleared '0' to run BIST on the USBP. - * @tclk: PHY Test Clock, used to load TDATA_IN to the USBP. - * @dp_pulld: PHY DP_PULLDOWN input to the USB-PHY. - * This signal enables the pull-down resistance on - * the D+ line. '1' pull down-resistance is connected - * to D+/ '0' pull down resistance is not connected - * to D+. When an A/B device is acting as a host - * (downstream-facing port), dp_pulldown and - * dm_pulldown are enabled. This must not toggle - * during normal operation. - * @dm_pulld: PHY DM_PULLDOWN input to the USB-PHY. - * This signal enables the pull-down resistance on - * the D- line. '1' pull down-resistance is connected - * to D-. '0' pull down resistance is not connected - * to D-. When an A/B device is acting as a host - * (downstream-facing port), dp_pulldown and - * dm_pulldown are enabled. This must not toggle - * during normal operation. - * @hst_mode: When '0' the USB is acting as HOST, when '1' - * USB is acting as device. This field needs to be - * set while the USB is in reset. - * @tuning: Transmitter Tuning for High-Speed Operation. - * Tunes the current supply and rise/fall output - * times for high-speed operation. - * [20:19] == 11: Current supply increased - * approximately 9% - * [20:19] == 10: Current supply increased - * approximately 4.5% - * [20:19] == 01: Design default. - * [20:19] == 00: Current supply decreased - * approximately 4.5% - * [22:21] == 11: Rise and fall times are increased. - * [22:21] == 10: Design default. - * [22:21] == 01: Rise and fall times are decreased. - * [22:21] == 00: Rise and fall times are decreased - * further as compared to the 01 setting. - * @tx_bs_enh: Transmit Bit Stuffing on [15:8]. - * Enables or disables bit stuffing on data[15:8] - * when bit-stuffing is enabled. - * @tx_bs_en: Transmit Bit Stuffing on [7:0]. - * Enables or disables bit stuffing on data[7:0] - * when bit-stuffing is enabled. - * @loop_enb: PHY Loopback Test Enable. - * '1': During data transmission the receive is - * enabled. - * '0': During data transmission the receive is - * disabled. - * Must be '0' for normal operation. - * @vtest_enb: Analog Test Pin Enable. - * '1' The PHY's analog_test pin is enabled for the - * input and output of applicable analog test signals. - * '0' THe analog_test pin is disabled. - * @bist_enb: Built-In Self Test Enable. - * Used to activate BIST in the PHY. - * @tdata_sel: Test Data Out Select. - * '1' test_data_out[3:0] (PHY) register contents - * are output. '0' internally generated signals are - * output. - * @taddr_in: Mode Address for Test Interface. - * Specifies the register address for writing to or - * reading from the PHY test interface register. - * @tdata_in: Internal Testing Register Input Data and Select - * This is a test bus. Data is present on [3:0], - * and its corresponding select (enable) is present - * on bits [7:4]. - * @ate_reset: Reset input from automatic test equipment. - * This is a test signal. When the USB Core is - * powered up (not in Susned Mode), an automatic - * tester can use this to disable phy_clock and - * free_clk, then re-enable them with an aligned - * phase. - * '1': The phy_clk and free_clk outputs are - * disabled. "0": The phy_clock and free_clk outputs - * are available within a specific period after the - * de-assertion. - */ - struct cvmx_usbnx_usbp_ctl_status_s { - __BITFIELD_FIELD(u64 txrisetune : 1, - __BITFIELD_FIELD(u64 txvreftune : 4, - __BITFIELD_FIELD(u64 txfslstune : 4, - __BITFIELD_FIELD(u64 txhsxvtune : 2, - __BITFIELD_FIELD(u64 sqrxtune : 3, - __BITFIELD_FIELD(u64 compdistune : 3, - __BITFIELD_FIELD(u64 otgtune : 3, - __BITFIELD_FIELD(u64 otgdisable : 1, - __BITFIELD_FIELD(u64 portreset : 1, - __BITFIELD_FIELD(u64 drvvbus : 1, - __BITFIELD_FIELD(u64 lsbist : 1, - __BITFIELD_FIELD(u64 fsbist : 1, - __BITFIELD_FIELD(u64 hsbist : 1, - __BITFIELD_FIELD(u64 bist_done : 1, - __BITFIELD_FIELD(u64 bist_err : 1, - __BITFIELD_FIELD(u64 tdata_out : 4, - __BITFIELD_FIELD(u64 siddq : 1, - __BITFIELD_FIELD(u64 txpreemphasistune : 1, - __BITFIELD_FIELD(u64 dma_bmode : 1, - __BITFIELD_FIELD(u64 usbc_end : 1, - __BITFIELD_FIELD(u64 usbp_bist : 1, - __BITFIELD_FIELD(u64 tclk : 1, - __BITFIELD_FIELD(u64 dp_pulld : 1, - __BITFIELD_FIELD(u64 dm_pulld : 1, - __BITFIELD_FIELD(u64 hst_mode : 1, - __BITFIELD_FIELD(u64 tuning : 4, - __BITFIELD_FIELD(u64 tx_bs_enh : 1, - __BITFIELD_FIELD(u64 tx_bs_en : 1, - __BITFIELD_FIELD(u64 loop_enb : 1, - __BITFIELD_FIELD(u64 vtest_enb : 1, - __BITFIELD_FIELD(u64 bist_enb : 1, - __BITFIELD_FIELD(u64 tdata_sel : 1, - __BITFIELD_FIELD(u64 taddr_in : 4, - __BITFIELD_FIELD(u64 tdata_in : 8, - __BITFIELD_FIELD(u64 ate_reset : 1, - ;))))))))))))))))))))))))))))))))))) - } s; -}; - -#endif /* __OCTEON_HCD_H__ */ |