Merge tag 'wireless-next-2022-07-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Johannes Berg says:

====================
A fairly large set of updates for next, highlights:

ath10k
 * ethernet frame format support

rtw89
 * TDLS support

cfg80211/mac80211
 * airtime fairness fixes
 * EHT support continued, especially in AP mode
 * initial (and still major) rework for multi-link
   operation (MLO) from 802.11be/wifi 7

As usual, also many small updates/cleanups/fixes/etc.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

4 files changed, 660 insertions, 113 deletions

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 5c65ae6b8154..f386f9ed41f3 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -4094,6 +4094,7 @@ static inline bool _ieee80211_is_robust_mgmt_frame(struct ieee80211_hdr *hdr)
 			*category != WLAN_CATEGORY_SELF_PROTECTED &&
 			*category != WLAN_CATEGORY_UNPROT_DMG &&
 			*category != WLAN_CATEGORY_VHT &&
+			*category != WLAN_CATEGORY_S1G &&
 			*category != WLAN_CATEGORY_VENDOR_SPECIFIC;
 	}
 
@@ -4376,4 +4377,229 @@ enum ieee80211_range_params_max_total_ltf {
 	IEEE80211_RANGE_PARAMS_MAX_TOTAL_LTF_UNSPECIFIED,
 };
 
+/* multi-link device */
+#define IEEE80211_MLD_MAX_NUM_LINKS	15
+
+#define IEEE80211_ML_CONTROL_TYPE			0x0007
+#define IEEE80211_ML_CONTROL_TYPE_BASIC			0
+#define IEEE80211_ML_CONTROL_TYPE_PREQ			1
+#define IEEE80211_ML_CONTROL_TYPE_RECONF		2
+#define IEEE80211_ML_CONTROL_TYPE_TDLS			3
+#define IEEE80211_ML_CONTROL_TYPE_PRIO_ACCESS		4
+#define IEEE80211_ML_CONTROL_PRESENCE_MASK		0xfff0
+
+struct ieee80211_multi_link_elem {
+	__le16 control;
+	u8 variable[];
+} __packed;
+
+#define IEEE80211_MLC_BASIC_PRES_LINK_ID		0x0010
+#define IEEE80211_MLC_BASIC_PRES_BSS_PARAM_CH_CNT	0x0020
+#define IEEE80211_MLC_BASIC_PRES_MED_SYNC_DELAY		0x0040
+#define IEEE80211_MLC_BASIC_PRES_EML_CAPA		0x0080
+#define IEEE80211_MLC_BASIC_PRES_MLD_CAPA_OP		0x0100
+#define IEEE80211_MLC_BASIC_PRES_MLD_ID			0x0200
+
+#define IEEE80211_MED_SYNC_DELAY_DURATION		0x00ff
+#define IEEE80211_MED_SYNC_DELAY_SYNC_OFDM_ED_THRESH	0x0f00
+#define IEEE80211_MED_SYNC_DELAY_SYNC_MAX_NUM_TXOPS	0xf000
+
+#define IEEE80211_EML_CAP_EMLSR_SUPP			0x0001
+#define IEEE80211_EML_CAP_EMLSR_PADDING_DELAY		0x000e
+#define  IEEE80211_EML_CAP_EMLSR_PADDING_DELAY_0US		0
+#define  IEEE80211_EML_CAP_EMLSR_PADDING_DELAY_32US		1
+#define  IEEE80211_EML_CAP_EMLSR_PADDING_DELAY_64US		2
+#define  IEEE80211_EML_CAP_EMLSR_PADDING_DELAY_128US		3
+#define  IEEE80211_EML_CAP_EMLSR_PADDING_DELAY_256US		4
+#define IEEE80211_EML_CAP_EMLSR_TRANSITION_DELAY	0x0070
+#define  IEEE80211_EML_CAP_EMLSR_TRANSITION_DELAY_0US		0
+#define  IEEE80211_EML_CAP_EMLSR_TRANSITION_DELAY_16US		1
+#define  IEEE80211_EML_CAP_EMLSR_TRANSITION_DELAY_32US		2
+#define  IEEE80211_EML_CAP_EMLSR_TRANSITION_DELAY_64US		3
+#define  IEEE80211_EML_CAP_EMLSR_TRANSITION_DELAY_128US		4
+#define  IEEE80211_EML_CAP_EMLSR_TRANSITION_DELAY_256US		5
+#define IEEE80211_EML_CAP_EMLMR_SUPPORT			0x0080
+#define IEEE80211_EML_CAP_EMLMR_DELAY			0x0700
+#define  IEEE80211_EML_CAP_EMLMR_DELAY_0US			0
+#define  IEEE80211_EML_CAP_EMLMR_DELAY_32US			1
+#define  IEEE80211_EML_CAP_EMLMR_DELAY_64US			2
+#define  IEEE80211_EML_CAP_EMLMR_DELAY_128US			3
+#define  IEEE80211_EML_CAP_EMLMR_DELAY_256US			4
+#define IEEE80211_EML_CAP_TRANSITION_TIMEOUT		0x7800
+#define  IEEE80211_EML_CAP_TRANSITION_TIMEOUT_0			0
+#define  IEEE80211_EML_CAP_TRANSITION_TIMEOUT_128US		1
+#define  IEEE80211_EML_CAP_TRANSITION_TIMEOUT_256US		2
+#define  IEEE80211_EML_CAP_TRANSITION_TIMEOUT_512US		3
+#define  IEEE80211_EML_CAP_TRANSITION_TIMEOUT_1TU		4
+#define  IEEE80211_EML_CAP_TRANSITION_TIMEOUT_2TU		5
+#define  IEEE80211_EML_CAP_TRANSITION_TIMEOUT_4TU		6
+#define  IEEE80211_EML_CAP_TRANSITION_TIMEOUT_8TU		7
+#define  IEEE80211_EML_CAP_TRANSITION_TIMEOUT_16TU		8
+#define  IEEE80211_EML_CAP_TRANSITION_TIMEOUT_32TU		9
+#define  IEEE80211_EML_CAP_TRANSITION_TIMEOUT_64TU		10
+#define  IEEE80211_EML_CAP_TRANSITION_TIMEOUT_128TU		11
+
+#define IEEE80211_MLD_CAP_OP_MAX_SIMUL_LINKS		0x000f
+#define IEEE80211_MLD_CAP_OP_SRS_SUPPORT		0x0010
+#define IEEE80211_MLD_CAP_OP_TID_TO_LINK_MAP_NEG_SUPP	0x0060
+#define IEEE80211_MLD_CAP_OP_FREQ_SEP_TYPE_IND		0x0f80
+#define IEEE80211_MLD_CAP_OP_AAR_SUPPORT		0x1000
+
+struct ieee80211_mle_basic_common_info {
+	u8 len;
+	u8 mld_mac_addr[ETH_ALEN];
+	u8 variable[];
+} __packed;
+
+#define IEEE80211_MLC_PREQ_PRES_MLD_ID			0x0010
+
+struct ieee80211_mle_preq_common_info {
+	u8 len;
+	u8 variable[];
+} __packed;
+
+#define IEEE80211_MLC_RECONF_PRES_MLD_MAC_ADDR		0x0010
+
+/* no fixed fields in RECONF */
+
+struct ieee80211_mle_tdls_common_info {
+	u8 len;
+	u8 ap_mld_mac_addr[ETH_ALEN];
+} __packed;
+
+#define IEEE80211_MLC_PRIO_ACCESS_PRES_AP_MLD_MAC_ADDR	0x0010
+
+/* no fixed fields in PRIO_ACCESS */
+
+/**
+ * ieee80211_mle_common_size - check multi-link element common size
+ * @data: multi-link element, must already be checked for size using
+ *	ieee80211_mle_size_ok()
+ */
+static inline u8 ieee80211_mle_common_size(const u8 *data)
+{
+	const struct ieee80211_multi_link_elem *mle = (const void *)data;
+	u16 control = le16_to_cpu(mle->control);
+	u8 common = 0;
+
+	switch (u16_get_bits(control, IEEE80211_ML_CONTROL_TYPE)) {
+	case IEEE80211_ML_CONTROL_TYPE_BASIC:
+		common += sizeof(struct ieee80211_mle_basic_common_info);
+		break;
+	case IEEE80211_ML_CONTROL_TYPE_PREQ:
+		common += sizeof(struct ieee80211_mle_preq_common_info);
+		break;
+	case IEEE80211_ML_CONTROL_TYPE_RECONF:
+		if (control & IEEE80211_MLC_RECONF_PRES_MLD_MAC_ADDR)
+			common += ETH_ALEN;
+		return common;
+	case IEEE80211_ML_CONTROL_TYPE_TDLS:
+		common += sizeof(struct ieee80211_mle_tdls_common_info);
+		break;
+	case IEEE80211_ML_CONTROL_TYPE_PRIO_ACCESS:
+		if (control & IEEE80211_MLC_PRIO_ACCESS_PRES_AP_MLD_MAC_ADDR)
+			common += ETH_ALEN;
+		return common;
+	default:
+		WARN_ON(1);
+		return 0;
+	}
+
+	return common + mle->variable[0];
+}
+
+/**
+ * ieee80211_mle_size_ok - validate multi-link element size
+ * @data: pointer to the element data
+ * @len: length of the containing element
+ */
+static inline bool ieee80211_mle_size_ok(const u8 *data, u8 len)
+{
+	const struct ieee80211_multi_link_elem *mle = (const void *)data;
+	u8 fixed = sizeof(*mle);
+	u8 common = 0;
+	bool check_common_len = false;
+	u16 control;
+
+	if (len < fixed)
+		return false;
+
+	control = le16_to_cpu(mle->control);
+
+	switch (u16_get_bits(control, IEEE80211_ML_CONTROL_TYPE)) {
+	case IEEE80211_ML_CONTROL_TYPE_BASIC:
+		common += sizeof(struct ieee80211_mle_basic_common_info);
+		check_common_len = true;
+		if (control & IEEE80211_MLC_BASIC_PRES_LINK_ID)
+			common += 1;
+		if (control & IEEE80211_MLC_BASIC_PRES_BSS_PARAM_CH_CNT)
+			common += 1;
+		if (control & IEEE80211_MLC_BASIC_PRES_MED_SYNC_DELAY)
+			common += 2;
+		if (control & IEEE80211_MLC_BASIC_PRES_EML_CAPA)
+			common += 2;
+		if (control & IEEE80211_MLC_BASIC_PRES_MLD_CAPA_OP)
+			common += 2;
+		if (control & IEEE80211_MLC_BASIC_PRES_MLD_ID)
+			common += 1;
+		break;
+	case IEEE80211_ML_CONTROL_TYPE_PREQ:
+		common += sizeof(struct ieee80211_mle_preq_common_info);
+		if (control & IEEE80211_MLC_PREQ_PRES_MLD_ID)
+			common += 1;
+		check_common_len = true;
+		break;
+	case IEEE80211_ML_CONTROL_TYPE_RECONF:
+		if (control & IEEE80211_MLC_RECONF_PRES_MLD_MAC_ADDR)
+			common += ETH_ALEN;
+		break;
+	case IEEE80211_ML_CONTROL_TYPE_TDLS:
+		common += sizeof(struct ieee80211_mle_tdls_common_info);
+		check_common_len = true;
+		break;
+	case IEEE80211_ML_CONTROL_TYPE_PRIO_ACCESS:
+		if (control & IEEE80211_MLC_PRIO_ACCESS_PRES_AP_MLD_MAC_ADDR)
+			common += ETH_ALEN;
+		break;
+	default:
+		/* we don't know this type */
+		return true;
+	}
+
+	if (len < fixed + common)
+		return false;
+
+	if (!check_common_len)
+		return true;
+
+	/* if present, common length is the first octet there */
+	return mle->variable[0] >= common;
+}
+
+enum ieee80211_mle_subelems {
+	IEEE80211_MLE_SUBELEM_PER_STA_PROFILE		= 0,
+};
+
+#define IEEE80211_MLE_STA_CONTROL_LINK_ID			0x000f
+#define IEEE80211_MLE_STA_CONTROL_COMPLETE_PROFILE		0x0010
+#define IEEE80211_MLE_STA_CONTROL_STA_MAC_ADDR_PRESENT		0x0020
+#define IEEE80211_MLE_STA_CONTROL_BEACON_INT_PRESENT		0x0040
+#define IEEE80211_MLE_STA_CONTROL_TSF_OFFS_PRESENT		0x0080
+#define IEEE80211_MLE_STA_CONTROL_DTIM_INFO_PRESENT		0x0100
+#define IEEE80211_MLE_STA_CONTROL_NSTR_LINK_PAIR_PRESENT	0x0200
+#define IEEE80211_MLE_STA_CONTROL_NSTR_BITMAP_SIZE		0x0400
+#define IEEE80211_MLE_STA_CONTROL_BSS_PARAM_CHANGE_CNT_PRESENT	0x0800
+
+struct ieee80211_mle_per_sta_profile {
+	__le16 control;
+	u8 sta_info_len;
+	u8 variable[];
+} __packed;
+
+#define for_each_mle_subelement(_elem, _data, _len)			\
+	if (ieee80211_mle_size_ok(_data, _len))				\
+		for_each_element(_elem,					\
+				 _data + ieee80211_mle_common_size(_data),\
+				 _len - ieee80211_mle_common_size(_data))
+
 #endif /* LINUX_IEEE80211_H */
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 6d02e12e4702..140354f5f15b 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -374,6 +374,7 @@ struct ieee80211_sta_he_cap {
  * and NSS Set field"
  *
  * @only_20mhz: MCS/NSS support for 20 MHz-only STA.
+ * @bw: MCS/NSS support for 80, 160 and 320 MHz
  * @bw._80: MCS/NSS support for BW <= 80 MHz
  * @bw._160: MCS/NSS support for BW = 160 MHz
  * @bw._320: MCS/NSS support for BW = 320 MHz
@@ -420,6 +421,7 @@ struct ieee80211_sta_eht_cap {
  * @he_cap: holds the HE capabilities
  * @he_6ghz_capa: HE 6 GHz capabilities, must be filled in for a
  *	6 GHz band channel (and 0 may be valid value).
+ * @eht_cap: STA's EHT capabilities
  * @vendor_elems: vendor element(s) to advertise
  * @vendor_elems.data: vendor element(s) data
  * @vendor_elems.len: vendor element(s) length
@@ -495,7 +497,7 @@ struct ieee80211_edmg {
  * This structure describes most essential parameters needed
  * to describe 802.11ah S1G capabilities for a STA.
  *
- * @s1g_supported: is STA an S1G STA
+ * @s1g: is STA an S1G STA
  * @cap: S1G capabilities information
  * @nss_mcs: Supported NSS MCS set
  */
@@ -1061,6 +1063,7 @@ struct survey_info {
 };
 
 #define CFG80211_MAX_WEP_KEYS	4
+#define CFG80211_MAX_NUM_AKM_SUITES	10
 
 /**
  * struct cfg80211_crypto_settings - Crypto settings
@@ -1112,7 +1115,7 @@ struct cfg80211_crypto_settings {
 	int n_ciphers_pairwise;
 	u32 ciphers_pairwise[NL80211_MAX_NR_CIPHER_SUITES];
 	int n_akm_suites;
-	u32 akm_suites[NL80211_MAX_NR_AKM_SUITES];
+	u32 akm_suites[CFG80211_MAX_NUM_AKM_SUITES];
 	bool control_port;
 	__be16 control_port_ethertype;
 	bool control_port_no_encrypt;
@@ -1158,6 +1161,7 @@ struct cfg80211_mbssid_elems {
 
 /**
  * struct cfg80211_beacon_data - beacon data
+ * @link_id: the link ID for the AP MLD link sending this beacon
  * @head: head portion of beacon (before TIM IE)
  *	or %NULL if not changed
  * @tail: tail portion of beacon (after TIM IE)
@@ -1188,6 +1192,8 @@ struct cfg80211_mbssid_elems {
  *	attribute is present in beacon data or not.
  */
 struct cfg80211_beacon_data {
+	unsigned int link_id;
+
 	const u8 *head, *tail;
 	const u8 *beacon_ies;
 	const u8 *proberesp_ies;
@@ -1290,6 +1296,8 @@ struct cfg80211_unsol_bcast_probe_resp {
  * @ht_cap: HT capabilities (or %NULL if HT isn't enabled)
  * @vht_cap: VHT capabilities (or %NULL if VHT isn't enabled)
  * @he_cap: HE capabilities (or %NULL if HE isn't enabled)
+ * @eht_cap: EHT capabilities (or %NULL if EHT isn't enabled)
+ * @eht_oper: EHT operation IE (or %NULL if EHT isn't enabled)
  * @ht_required: stations must support HT
  * @vht_required: stations must support VHT
  * @twt_responder: Enable Target Wait Time
@@ -1326,6 +1334,8 @@ struct cfg80211_ap_settings {
 	const struct ieee80211_vht_cap *vht_cap;
 	const struct ieee80211_he_cap_elem *he_cap;
 	const struct ieee80211_he_operation *he_oper;
+	const struct ieee80211_eht_cap_elem *eht_cap;
+	const struct ieee80211_eht_operation *eht_oper;
 	bool ht_required, vht_required, he_required, sae_h2e_required;
 	bool twt_responder;
 	u32 flags;
@@ -1370,8 +1380,8 @@ struct cfg80211_csa_settings {
  * Used for bss color change
  *
  * @beacon_color_change: beacon data while performing the color countdown
- * @counter_offsets_beacon: offsets of the counters within the beacon (tail)
- * @counter_offsets_presp: offsets of the counters within the probe response
+ * @counter_offset_beacon: offsets of the counters within the beacon (tail)
+ * @counter_offset_presp: offsets of the counters within the probe response
  * @beacon_next: beacon data to be used after the color change
  * @count: number of beacons until the color change
  * @color: the color used after the change
@@ -1414,6 +1424,7 @@ struct iface_combination_params {
  * @STATION_PARAM_APPLY_UAPSD: apply new uAPSD parameters (uapsd_queues, max_sp)
  * @STATION_PARAM_APPLY_CAPABILITY: apply new capability
  * @STATION_PARAM_APPLY_PLINK_STATE: apply new plink state
+ * @STATION_PARAM_APPLY_STA_TXPOWER: apply tx power for STA
  *
  * Not all station parameters have in-band "no change" signalling,
  * for those that don't these flags will are used.
@@ -2146,6 +2157,9 @@ struct bss_parameters {
  * @plink_timeout: If no tx activity is seen from a STA we've established
  *	peering with for longer than this time (in seconds), then remove it
  *	from the STA's list of peers.  Default is 30 minutes.
+ * @dot11MeshConnectedToAuthServer: if set to true then this mesh STA
+ *	will advertise that it is connected to a authentication server
+ *	in the mesh formation field.
  * @dot11MeshConnectedToMeshGate: if set to true, advertise that this STA is
  *      connected to a mesh gate in mesh formation info.  If false, the
  *      value in mesh formation is determined by the presence of root paths
@@ -2318,12 +2332,12 @@ struct cfg80211_scan_info {
 /**
  * struct cfg80211_scan_6ghz_params - relevant for 6 GHz only
  *
- * @short_bssid: short ssid to scan for
+ * @short_ssid: short ssid to scan for
  * @bssid: bssid to scan for
  * @channel_idx: idx of the channel in the channel array in the scan request
  *	 which the above info relvant to
  * @unsolicited_probe: the AP transmits unsolicited probe response every 20 TU
- * @short_ssid_valid: short_ssid is valid and can be used
+ * @short_ssid_valid: @short_ssid is valid and can be used
  * @psc_no_listen: when set, and the channel is a PSC channel, no need to wait
  *       20 TUs before starting to send probe requests.
  */
@@ -2715,6 +2729,12 @@ static inline const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 id)
  *	Authentication algorithm number, i.e., starting at the Authentication
  *	transaction sequence number field.
  * @auth_data_len: Length of auth_data buffer in octets
+ * @link_id: if >= 0, indicates authentication should be done as an MLD,
+ *	the interface address is included as the MLD address and the
+ *	necessary link (with the given link_id) will be created (and
+ *	given an MLD address) by the driver
+ * @ap_mld_addr: AP MLD address in case of authentication request with
+ *	an AP MLD, valid iff @link_id >= 0
  */
 struct cfg80211_auth_request {
 	struct cfg80211_bss *bss;
@@ -2725,6 +2745,21 @@ struct cfg80211_auth_request {
 	u8 key_len, key_idx;
 	const u8 *auth_data;
 	size_t auth_data_len;
+	s8 link_id;
+	const u8 *ap_mld_addr;
+};
+
+/**
+ * struct cfg80211_assoc_link - per-link information for MLO association
+ * @bss: the BSS pointer, see also &struct cfg80211_assoc_request::bss;
+ *	if this is %NULL for a link, that link is not requested
+ * @elems: extra elements for the per-STA profile for this link
+ * @elems_len: length of the elements
+ */
+struct cfg80211_assoc_link {
+	struct cfg80211_bss *bss;
+	const u8 *elems;
+	size_t elems_len;
 };
 
 /**
@@ -2739,6 +2774,9 @@ struct cfg80211_auth_request {
  *	request (connect callback).
  * @ASSOC_REQ_DISABLE_HE:  Disable HE
  * @ASSOC_REQ_DISABLE_EHT:  Disable EHT
+ * @CONNECT_REQ_MLO_SUPPORT: Userspace indicates support for handling MLD links.
+ *	Drivers shall disable MLO features for the current association if this
+ *	flag is not set.
  */
 enum cfg80211_assoc_req_flags {
 	ASSOC_REQ_DISABLE_HT			= BIT(0),
@@ -2747,6 +2785,7 @@ enum cfg80211_assoc_req_flags {
 	CONNECT_REQ_EXTERNAL_AUTH_SUPPORT	= BIT(3),
 	ASSOC_REQ_DISABLE_HE			= BIT(4),
 	ASSOC_REQ_DISABLE_EHT			= BIT(5),
+	CONNECT_REQ_MLO_SUPPORT			= BIT(6),
 };
 
 /**
@@ -2758,6 +2797,8 @@ enum cfg80211_assoc_req_flags {
  *	given a reference that it must give back to cfg80211_send_rx_assoc()
  *	or to cfg80211_assoc_timeout(). To ensure proper refcounting, new
  *	association requests while already associating must be rejected.
+ *	This also applies to the @links.bss parameter, which is used instead
+ *	of this one (it is %NULL) for MLO associations.
  * @ie: Extra IEs to add to (Re)Association Request frame or %NULL
  * @ie_len: Length of ie buffer in octets
  * @use_mfp: Use management frame protection (IEEE 802.11w) in this association
@@ -2782,6 +2823,11 @@ enum cfg80211_assoc_req_flags {
  *	with 16 octets of STA Nonce followed by 16 octets of AP Nonce.
  * @s1g_capa: S1G capability override
  * @s1g_capa_mask: S1G capability override mask
+ * @links: per-link information for MLO connections
+ * @link_id: >= 0 for MLO connections, where links are given, and indicates
+ *	the link on which the association request should be sent
+ * @ap_mld_addr: AP MLD address in case of MLO association request,
+ *	valid iff @link_id >= 0
  */
 struct cfg80211_assoc_request {
 	struct cfg80211_bss *bss;
@@ -2797,6 +2843,9 @@ struct cfg80211_assoc_request {
 	size_t fils_kek_len;
 	const u8 *fils_nonces;
 	struct ieee80211_s1g_cap s1g_capa, s1g_capa_mask;
+	struct cfg80211_assoc_link links[IEEE80211_MLD_MAX_NUM_LINKS];
+	const u8 *ap_mld_addr;
+	s8 link_id;
 };
 
 /**
@@ -3279,7 +3328,7 @@ struct cfg80211_wowlan_wakeup {
  * @kck: key confirmation key (@kck_len bytes)
  * @replay_ctr: replay counter (NL80211_REPLAY_CTR_LEN bytes)
  * @kek_len: length of kek
- * @kck_len length of kck
+ * @kck_len: length of kck
  * @akm: akm (oui, id)
  */
 struct cfg80211_gtk_rekey_data {
@@ -3641,6 +3690,7 @@ struct cfg80211_pmsr_ftm_result {
  * @type: type of the measurement reported, note that we only support reporting
  *	one type at a time, but you can report multiple results separately and
  *	they're all aggregated for userspace.
+ * @ftm: FTM result
  */
 struct cfg80211_pmsr_result {
 	u64 host_time, ap_tsf;
@@ -3779,7 +3829,7 @@ struct cfg80211_update_owe_info {
  *	for the entire device
  * @interface_stypes: bitmap of management frame subtypes registered
  *	for the given interface
- * @global_mcast_rx: mcast RX is needed globally for these subtypes
+ * @global_mcast_stypes: mcast RX is needed globally for these subtypes
  * @interface_mcast_stypes: mcast RX is needed on this interface
  *	for these subtypes
  */
@@ -3824,6 +3874,11 @@ struct mgmt_frame_regs {
  *	keep the struct wireless_dev's iftype updated.
  *	This additionally holds the RTNL to be able to do netdev changes.
  *
+ * @add_intf_link: Add a new MLO link to the given interface. Note that
+ *	the wdev->link[] data structure has been updated, so the new link
+ *	address is available.
+ * @del_intf_link: Remove an MLO link from the given interface.
+ *
  * @add_key: add a key with the given parameters. @mac_addr will be %NULL
  *	when adding a group key.
  *
@@ -4178,6 +4233,13 @@ struct cfg80211_ops {
 				       enum nl80211_iftype type,
 				       struct vif_params *params);
 
+	int	(*add_intf_link)(struct wiphy *wiphy,
+				 struct wireless_dev *wdev,
+				 unsigned int link_id);
+	void	(*del_intf_link)(struct wiphy *wiphy,
+				 struct wireless_dev *wdev,
+				 unsigned int link_id);
+
 	int	(*add_key)(struct wiphy *wiphy, struct net_device *netdev,
 			   u8 key_index, bool pairwise, const u8 *mac_addr,
 			   struct key_params *params);
@@ -4201,7 +4263,8 @@ struct cfg80211_ops {
 			    struct cfg80211_ap_settings *settings);
 	int	(*change_beacon)(struct wiphy *wiphy, struct net_device *dev,
 				 struct cfg80211_beacon_data *info);
-	int	(*stop_ap)(struct wiphy *wiphy, struct net_device *dev);
+	int	(*stop_ap)(struct wiphy *wiphy, struct net_device *dev,
+			   unsigned int link_id);
 
 
 	int	(*add_station)(struct wiphy *wiphy, struct net_device *dev,
@@ -4309,6 +4372,7 @@ struct cfg80211_ops {
 
 	int	(*set_bitrate_mask)(struct wiphy *wiphy,
 				    struct net_device *dev,
+				    unsigned int link_id,
 				    const u8 *peer,
 				    const struct cfg80211_bitrate_mask *mask);
 
@@ -4384,6 +4448,7 @@ struct cfg80211_ops {
 
 	int	(*get_channel)(struct wiphy *wiphy,
 			       struct wireless_dev *wdev,
+			       unsigned int link_id,
 			       struct cfg80211_chan_def *chandef);
 
 	int	(*start_p2p_device)(struct wiphy *wiphy,
@@ -4420,6 +4485,7 @@ struct cfg80211_ops {
 			       struct cfg80211_qos_map *qos_map);
 
 	int	(*set_ap_chanwidth)(struct wiphy *wiphy, struct net_device *dev,
+				    unsigned int link_id,
 				    struct cfg80211_chan_def *chandef);
 
 	int	(*add_tx_ts)(struct wiphy *wiphy, struct net_device *dev,
@@ -4545,10 +4611,14 @@ struct cfg80211_ops {
  * @WIPHY_FLAG_HAS_STATIC_WEP: The device supports static WEP key installation
  *	before connection.
  * @WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK: The device supports bigger kek and kck keys
+ * @WIPHY_FLAG_SUPPORTS_MLO: This is a temporary flag gating the MLO APIs,
+ *	in order to not have them reachable in normal drivers, until we have
+ *	complete feature/interface combinations/etc. advertisement. No driver
+ *	should set this flag for now.
  */
 enum wiphy_flags {
 	WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK		= BIT(0),
-	/* use hole at 1 */
+	WIPHY_FLAG_SUPPORTS_MLO			= BIT(1),
 	WIPHY_FLAG_SPLIT_SCAN_6GHZ		= BIT(2),
 	WIPHY_FLAG_NETNS_OK			= BIT(3),
 	WIPHY_FLAG_PS_ON_BY_DEFAULT		= BIT(4),
@@ -4882,6 +4952,7 @@ struct wiphy_iftype_ext_capab {
  * @max_peers: maximum number of peers in a single measurement
  * @report_ap_tsf: can report assoc AP's TSF for radio resource measurement
  * @randomize_mac_addr: can randomize MAC address for measurement
+ * @ftm: FTM measurement data
  * @ftm.supported: FTM measurement is supported
  * @ftm.asap: ASAP-mode is supported
  * @ftm.non_asap: non-ASAP-mode is supported
@@ -5134,6 +5205,13 @@ struct wiphy_iftype_akm_suites {
  * @ema_max_profile_periodicity: maximum profile periodicity supported by
  *	the driver. Setting this field to a non-zero value indicates that the
  *	driver supports enhanced multi-BSSID advertisements (EMA AP).
+ * @max_num_akm_suites: maximum number of AKM suites allowed for
+ *	configuration through %NL80211_CMD_CONNECT, %NL80211_CMD_ASSOCIATE and
+ *	%NL80211_CMD_START_AP. Set to NL80211_MAX_NR_AKM_SUITES if not set by
+ *	driver. If set by driver minimum allowed value is
+ *	NL80211_MAX_NR_AKM_SUITES in order to avoid compatibility issues with
+ *	legacy userspace and maximum allowed value is
+ *	CFG80211_MAX_NUM_AKM_SUITES.
  */
 struct wiphy {
 	struct mutex mtx;
@@ -5280,6 +5358,7 @@ struct wiphy {
 
 	u8 mbssid_max_interfaces;
 	u8 ema_max_profile_periodicity;
+	u16 max_num_akm_suites;
 
 	char priv[] __aligned(NETDEV_ALIGN);
 };
@@ -5505,16 +5584,9 @@ static inline void wiphy_unlock(struct wiphy *wiphy)
  * @netdev: (private) Used to reference back to the netdev, may be %NULL
  * @identifier: (private) Identifier used in nl80211 to identify this
  *	wireless device if it has no netdev
- * @current_bss: (private) Used by the internal configuration code
- * @chandef: (private) Used by the internal configuration code to track
- *	the user-set channel definition.
- * @preset_chandef: (private) Used by the internal configuration code to
- *	track the channel to be used for AP later
+ * @u: union containing data specific to @iftype
+ * @connected: indicates if connected or not (STA mode)
  * @bssid: (private) Used by the internal configuration code
- * @ssid: (private) Used by the internal configuration code
- * @ssid_len: (private) Used by the internal configuration code
- * @mesh_id_len: (private) Used by the internal configuration code
- * @mesh_id_up_len: (private) Used by the internal configuration code
  * @wext: (private) Used by the internal wireless extensions compat code
  * @wext.ibss: (private) IBSS data part of wext handling
  * @wext.connect: (private) connection handling data
@@ -5564,6 +5636,9 @@ static inline void wiphy_unlock(struct wiphy *wiphy)
  * @pmsr_free_wk: (private) peer measurements cleanup work
  * @unprot_beacon_reported: (private) timestamp of last
  *	unprotected beacon report
+ * @links: array of %IEEE80211_MLD_MAX_NUM_LINKS elements containing @addr
+ *	@ap and @client for each link
+ * @valid_links: bitmap describing what elements of @links are valid
  */
 struct wireless_dev {
 	struct wiphy *wiphy;
@@ -5585,8 +5660,6 @@ struct wireless_dev {
 	u8 address[ETH_ALEN] __aligned(sizeof(u16));
 
 	/* currently used for IBSS and SME - might be rearranged later */
-	u8 ssid[IEEE80211_MAX_SSID_LEN];
-	u8 ssid_len, mesh_id_len, mesh_id_up_len;
 	struct cfg80211_conn *conn;
 	struct cfg80211_cached_keys *connect_keys;
 	enum ieee80211_bss_type conn_bss_type;
@@ -5598,20 +5671,17 @@ struct wireless_dev {
 	struct list_head event_list;
 	spinlock_t event_lock;
 
-	struct cfg80211_internal_bss *current_bss; /* associated / joined */
-	struct cfg80211_chan_def preset_chandef;
-	struct cfg80211_chan_def chandef;
+	u8 connected:1;
 
 	bool ps;
 	int ps_timeout;
 
-	int beacon_interval;
-
 	u32 ap_unexpected_nlportid;
 
 	u32 owner_nlportid;
 	bool nl_owner_dead;
 
+	/* FIXME: need to rework radar detection for MLO */
 	bool cac_started;
 	unsigned long cac_start_time;
 	unsigned int cac_time_ms;
@@ -5639,6 +5709,50 @@ struct wireless_dev {
 	struct work_struct pmsr_free_wk;
 
 	unsigned long unprot_beacon_reported;
+
+	union {
+		struct {
+			u8 connected_addr[ETH_ALEN] __aligned(2);
+			u8 ssid[IEEE80211_MAX_SSID_LEN];
+			u8 ssid_len;
+		} client;
+		struct {
+			int beacon_interval;
+			struct cfg80211_chan_def preset_chandef;
+			struct cfg80211_chan_def chandef;
+			u8 id[IEEE80211_MAX_SSID_LEN];
+			u8 id_len, id_up_len;
+		} mesh;
+		struct {
+			struct cfg80211_chan_def preset_chandef;
+			u8 ssid[IEEE80211_MAX_SSID_LEN];
+			u8 ssid_len;
+		} ap;
+		struct {
+			struct cfg80211_internal_bss *current_bss;
+			struct cfg80211_chan_def chandef;
+			int beacon_interval;
+			u8 ssid[IEEE80211_MAX_SSID_LEN];
+			u8 ssid_len;
+		} ibss;
+		struct {
+			struct cfg80211_chan_def chandef;
+		} ocb;
+	} u;
+
+	struct {
+		u8 addr[ETH_ALEN] __aligned(2);
+		union {
+			struct {
+				unsigned int beacon_interval;
+				struct cfg80211_chan_def chandef;
+			} ap;
+			struct {
+				struct cfg80211_internal_bss *current_bss;
+			} client;
+		};
+	} links[IEEE80211_MLD_MAX_NUM_LINKS];
+	u16 valid_links;
 };
 
 static inline const u8 *wdev_address(struct wireless_dev *wdev)
@@ -5668,6 +5782,32 @@ static inline void *wdev_priv(struct wireless_dev *wdev)
 }
 
 /**
+ * wdev_chandef - return chandef pointer from wireless_dev
+ * @wdev: the wdev
+ * @link_id: the link ID for MLO
+ *
+ * Return: The chandef depending on the mode, or %NULL.
+ */
+struct cfg80211_chan_def *wdev_chandef(struct wireless_dev *wdev,
+				       unsigned int link_id);
+
+static inline void WARN_INVALID_LINK_ID(struct wireless_dev *wdev,
+					unsigned int link_id)
+{
+	WARN_ON(link_id && !wdev->valid_links);
+	WARN_ON(wdev->valid_links &&
+		!(wdev->valid_links & BIT(link_id)));
+}
+
+#define for_each_valid_link(link_info, link_id)			\
+	for (link_id = 0;					\
+	     link_id < ((link_info)->valid_links ?		\
+			ARRAY_SIZE((link_info)->links) : 1);	\
+	     link_id++)						\
+		if (!(link_info)->valid_links ||		\
+		    ((link_info)->valid_links & BIT(link_id)))
+
+/**
  * DOC: Utility functions
  *
  * cfg80211 offers a number of utility functions that can be useful.
@@ -5943,6 +6083,7 @@ unsigned int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr);
  * @addr: the device MAC address
  * @iftype: the virtual interface type
  * @data_offset: offset of payload after the 802.11 header
+ * @is_amsdu: true if the 802.11 header is A-MSDU
  * Return: 0 on success. Non-zero on error.
  */
 int ieee80211_data_to_8023_exthdr(struct sk_buff *skb, struct ethhdr *ehdr,
@@ -6812,6 +6953,7 @@ void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid,
  * @macaddr: the MAC address of the new candidate
  * @ie: information elements advertised by the peer candidate
  * @ie_len: length of the information elements buffer
+ * @sig_dbm: signal level in dBm
  * @gfp: allocation flags
  *
  * This function notifies cfg80211 that the mesh peer candidate has been
@@ -7176,13 +7318,6 @@ struct cfg80211_fils_resp_params {
  *	indicate that this is a failure, but without a status code.
  *	@timeout_reason is used to report the reason for the timeout in that
  *	case.
- * @bssid: The BSSID of the AP (may be %NULL)
- * @bss: Entry of bss to which STA got connected to, can be obtained through
- *	cfg80211_get_bss() (may be %NULL). But it is recommended to store the
- *	bss from the connect_request and hold a reference to it and return
- *	through this param to avoid a warning if the bss is expired during the
- *	connection, esp. for those drivers implementing connect op.
- *	Only one parameter among @bssid and @bss needs to be specified.
  * @req_ie: Association request IEs (may be %NULL)
  * @req_ie_len: Association request IEs length
  * @resp_ie: Association response IEs (may be %NULL)
@@ -7194,17 +7329,41 @@ struct cfg80211_fils_resp_params {
  *	not known. This value is used only if @status < 0 to indicate that the
  *	failure is due to a timeout and not due to explicit rejection by the AP.
  *	This value is ignored in other cases (@status >= 0).
+ * @valid_links: For MLO connection, BIT mask of the valid link ids. Otherwise
+ *	zero.
+ * @ap_mld_addr: For MLO connection, MLD address of the AP. Otherwise %NULL.
+ * @links : For MLO connection, contains link info for the valid links indicated
+ *	using @valid_links. For non-MLO connection, links[0] contains the
+ *	connected AP info.
+ * @links.addr: For MLO connection, MAC address of the STA link. Otherwise
+ *	%NULL.
+ * @links.bssid: For MLO connection, MAC address of the AP link. For non-MLO
+ *	connection, links[0].bssid points to the BSSID of the AP (may be %NULL).
+ * @links.bss: For MLO connection, entry of bss to which STA link is connected.
+ *	For non-MLO connection, links[0].bss points to entry of bss to which STA
+ *	is connected. It can be obtained through cfg80211_get_bss() (may be
+ *	%NULL). It is recommended to store the bss from the connect_request and
+ *	hold a reference to it and return through this param to avoid a warning
+ *	if the bss is expired during the connection, esp. for those drivers
+ *	implementing connect op. Only one parameter among @bssid and @bss needs
+ *	to be specified.
  */
 struct cfg80211_connect_resp_params {
 	int status;
-	const u8 *bssid;
-	struct cfg80211_bss *bss;
 	const u8 *req_ie;
 	size_t req_ie_len;
 	const u8 *resp_ie;
 	size_t resp_ie_len;
 	struct cfg80211_fils_resp_params fils;
 	enum nl80211_timeout_reason timeout_reason;
+
+	const u8 *ap_mld_addr;
+	u16 valid_links;
+	struct {
+		const u8 *addr;
+		const u8 *bssid;
+		struct cfg80211_bss *bss;
+	} links[IEEE80211_MLD_MAX_NUM_LINKS];
 };
 
 /**
@@ -7274,8 +7433,8 @@ cfg80211_connect_bss(struct net_device *dev, const u8 *bssid,
 
 	memset(&params, 0, sizeof(params));
 	params.status = status;
-	params.bssid = bssid;
-	params.bss = bss;
+	params.links[0].bssid = bssid;
+	params.links[0].bss = bss;
 	params.req_ie = req_ie;
 	params.req_ie_len = req_ie_len;
 	params.resp_ie = resp_ie;
@@ -7346,24 +7505,40 @@ cfg80211_connect_timeout(struct net_device *dev, const u8 *bssid,
 /**
  * struct cfg80211_roam_info - driver initiated roaming information
  *
- * @channel: the channel of the new AP
- * @bss: entry of bss to which STA got roamed (may be %NULL if %bssid is set)
- * @bssid: the BSSID of the new AP (may be %NULL if %bss is set)
  * @req_ie: association request IEs (maybe be %NULL)
  * @req_ie_len: association request IEs length
  * @resp_ie: association response IEs (may be %NULL)
  * @resp_ie_len: assoc response IEs length
  * @fils: FILS related roaming information.
+ * @valid_links: For MLO roaming, BIT mask of the new valid links is set.
+ *	Otherwise zero.
+ * @ap_mld_addr: For MLO roaming, MLD address of the new AP. Otherwise %NULL.
+ * @links : For MLO roaming, contains new link info for the valid links set in
+ *	@valid_links. For non-MLO roaming, links[0] contains the new AP info.
+ * @links.addr: For MLO roaming, MAC address of the STA link. Otherwise %NULL.
+ * @links.bssid: For MLO roaming, MAC address of the new AP link. For non-MLO
+ *	roaming, links[0].bssid points to the BSSID of the new AP. May be
+ *	%NULL if %links.bss is set.
+ * @links.channel: the channel of the new AP.
+ * @links.bss: For MLO roaming, entry of new bss to which STA link got
+ *	roamed. For non-MLO roaming, links[0].bss points to entry of bss to
+ *	which STA got roamed (may be %NULL if %links.bssid is set)
  */
 struct cfg80211_roam_info {
-	struct ieee80211_channel *channel;
-	struct cfg80211_bss *bss;
-	const u8 *bssid;
 	const u8 *req_ie;
 	size_t req_ie_len;
 	const u8 *resp_ie;
 	size_t resp_ie_len;
 	struct cfg80211_fils_resp_params fils;
+
+	const u8 *ap_mld_addr;
+	u16 valid_links;
+	struct {
+		const u8 *addr;
+		const u8 *bssid;
+		struct ieee80211_channel *channel;
+		struct cfg80211_bss *bss;
+	} links[IEEE80211_MLD_MAX_NUM_LINKS];
 };
 
 /**
@@ -7882,12 +8057,14 @@ bool cfg80211_reg_can_beacon_relax(struct wiphy *wiphy,
  * cfg80211_ch_switch_notify - update wdev channel and notify userspace
  * @dev: the device which switched channels
  * @chandef: the new channel definition
+ * @link_id: the link ID for MLO, must be 0 for non-MLO
  *
  * Caller must acquire wdev_lock, therefore must only be called from sleepable
  * driver context!
  */
 void cfg80211_ch_switch_notify(struct net_device *dev,
-			       struct cfg80211_chan_def *chandef);
+			       struct cfg80211_chan_def *chandef,
+			       unsigned int link_id);
 
 /*
  * cfg80211_ch_switch_started_notify - notify channel switch start
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 5c9e97eca739..256b9215e17b 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -261,11 +261,13 @@ enum ieee80211_chanctx_switch_mode {
  * done.
  *
  * @vif: the vif that should be switched from old_ctx to new_ctx
+ * @link_id: the link ID that's switching
  * @old_ctx: the old context to which the vif was assigned
  * @new_ctx: the new context to which the vif must be assigned
  */
 struct ieee80211_vif_chanctx_switch {
 	struct ieee80211_vif *vif;
+	unsigned int link_id;
 	struct ieee80211_chanctx_conf *old_ctx;
 	struct ieee80211_chanctx_conf *new_ctx;
 };
@@ -273,8 +275,8 @@ struct ieee80211_vif_chanctx_switch {
 /**
  * enum ieee80211_bss_change - BSS change notification flags
  *
- * These flags are used with the bss_info_changed() callback
- * to indicate which BSS parameter changed.
+ * These flags are used with the bss_info_changed(), link_info_changed()
+ * and vif_cfg_changed() callbacks to indicate which parameter(s) changed.
  *
  * @BSS_CHANGED_ASSOC: association status changed (associated/disassociated),
  *	also implies a change in the AID.
@@ -513,6 +515,7 @@ struct ieee80211_fils_discovery {
  * This structure keeps information about a BSS (and an association
  * to that BSS) that can change during the lifetime of the BSS.
  *
+ * @addr: (link) address used locally
  * @htc_trig_based_pkt_ext: default PE in 4us units, if BSS supports HE
  * @uora_exists: is the UORA element advertised by AP
  * @ack_enabled: indicates support to receive a multi-TID that solicits either
@@ -526,11 +529,6 @@ struct ieee80211_fils_discovery {
  *	mode only, set if the AP advertises TWT responder role)
  * @twt_protected: does this BSS support protected TWT frames
  * @twt_broadcast: does this BSS support broadcast TWT
- * @assoc: association status
- * @ibss_joined: indicates whether this station is part of an IBSS
- *	or not
- * @ibss_creator: indicates if a new IBSS network is being created
- * @aid: association ID number, valid only when @assoc is true
  * @use_cts_prot: use CTS protection
  * @use_short_preamble: use 802.11b short preamble
  * @use_short_slot: use short slot time (only relevant for ERP)
@@ -551,6 +549,8 @@ struct ieee80211_fils_discovery {
  *	IMPORTANT: These three sync_* parameters would possibly be out of sync
  *	by the time the driver will use them. The synchronized view is currently
  *	guaranteed only in certain callbacks.
+ *	Note also that this is not used with MLD associations, mac80211 doesn't
+ *	know how to track beacons for all of the links for this.
  * @beacon_int: beacon interval
  * @assoc_capability: capabilities taken from assoc resp
  * @basic_rates: bitmap of basic rates, each bit stands for an
@@ -576,21 +576,9 @@ struct ieee80211_fils_discovery {
  *	threshold event and can't be enabled simultaneously with it.
  * @cqm_rssi_high: Connection quality monitor RSSI upper threshold.
  * @cqm_rssi_hyst: Connection quality monitor RSSI hysteresis
- * @arp_addr_list: List of IPv4 addresses for hardware ARP filtering. The
- *	may filter ARP queries targeted for other addresses than listed here.
- *	The driver must allow ARP queries targeted for all address listed here
- *	to pass through. An empty list implies no ARP queries need to pass.
- * @arp_addr_cnt: Number of addresses currently on the list. Note that this
- *	may be larger than %IEEE80211_BSS_ARP_ADDR_LIST_LEN (the arp_addr_list
- *	array size), it's up to the driver what to do in that case.
  * @qos: This is a QoS-enabled BSS.
- * @idle: This interface is idle. There's also a global idle flag in the
- *	hardware config which may be more appropriate depending on what
- *	your driver/device needs to do.
  * @ps: power-save mode (STA only). This flag is NOT affected by
  *	offchannel/dynamic_ps operations.
- * @ssid: The SSID of the current vif. Valid in AP and IBSS mode.
- * @ssid_len: Length of SSID given in @ssid.
  * @hidden_ssid: The SSID of the current vif is hidden. Only valid in AP-mode.
  * @txpower: TX power in dBm.  INT_MIN means not configured.
  * @txpower_type: TX power adjustment used to control per packet Transmit
@@ -628,7 +616,6 @@ struct ieee80211_fils_discovery {
  * @fils_discovery: FILS discovery configuration
  * @unsol_bcast_probe_resp_interval: Unsolicited broadcast probe response
  *	interval.
- * @s1g: BSS is S1G BSS (affects Association Request format).
  * @beacon_tx_rate: The configured beacon transmit rate that needs to be passed
  *	to driver when rate control is offloaded to firmware.
  * @power_type: power type of BSS for 6 GHz
@@ -636,9 +623,23 @@ struct ieee80211_fils_discovery {
  * @tx_pwr_env_num: number of @tx_pwr_env.
  * @pwr_reduction: power constraint of BSS.
  * @eht_support: does this BSS support EHT
+ * @csa_active: marks whether a channel switch is going on. Internally it is
+ *	write-protected by sdata_lock and local->mtx so holding either is fine
+ *	for read access.
+ * @mu_mimo_owner: indicates interface owns MU-MIMO capability
+ * @chanctx_conf: The channel context this interface is assigned to, or %NULL
+ *	when it is not assigned. This pointer is RCU-protected due to the TX
+ *	path needing to access it; even though the netdev carrier will always
+ *	be off when it is %NULL there can still be races and packets could be
+ *	processed after it switches back to %NULL.
+ * @color_change_active: marks whether a color change is ongoing. Internally it is
+ *	write-protected by sdata_lock and local->mtx so holding either is fine
+ *	for read access.
+ * @color_change_color: the bss color that will be used after the change.
  */
 struct ieee80211_bss_conf {
 	const u8 *bssid;
+	u8 addr[ETH_ALEN] __aligned(2);
 	u8 htc_trig_based_pkt_ext;
 	bool uora_exists;
 	u8 uora_ocw_range;
@@ -648,10 +649,6 @@ struct ieee80211_bss_conf {
 	bool twt_responder;
 	bool twt_protected;
 	bool twt_broadcast;
-	/* association related data */
-	bool assoc, ibss_joined;
-	bool ibss_creator;
-	u16 aid;
 	/* erp related data */
 	bool use_cts_prot;
 	bool use_short_preamble;
@@ -673,13 +670,8 @@ struct ieee80211_bss_conf {
 	s32 cqm_rssi_high;
 	struct cfg80211_chan_def chandef;
 	struct ieee80211_mu_group_data mu_group;
-	__be32 arp_addr_list[IEEE80211_BSS_ARP_ADDR_LIST_LEN];
-	int arp_addr_cnt;
 	bool qos;
-	bool idle;
 	bool ps;
-	u8 ssid[IEEE80211_MAX_SSID_LEN];
-	size_t ssid_len;
 	bool hidden_ssid;
 	int txpower;
 	enum nl80211_tx_power_setting txpower_type;
@@ -704,13 +696,19 @@ struct ieee80211_bss_conf {
 	struct cfg80211_he_bss_color he_bss_color;
 	struct ieee80211_fils_discovery fils_discovery;
 	u32 unsol_bcast_probe_resp_interval;
-	bool s1g;
 	struct cfg80211_bitrate_mask beacon_tx_rate;
 	enum ieee80211_ap_reg_power power_type;
 	struct ieee80211_tx_pwr_env tx_pwr_env[IEEE80211_TPE_MAX_IE_COUNT];
 	u8 tx_pwr_env_num;
 	u8 pwr_reduction;
 	bool eht_support;
+
+	bool csa_active;
+	bool mu_mimo_owner;
+	struct ieee80211_chanctx_conf __rcu *chanctx_conf;
+
+	bool color_change_active;
+	u8 color_change_color;
 };
 
 /**
@@ -869,6 +867,10 @@ enum mac80211_tx_info_flags {
  * @IEEE80211_TX_CTRL_DONT_REORDER: This frame should not be reordered
  *	relative to other frames that have this flag set, independent
  *	of their QoS TID or other priority field values.
+ * @IEEE80211_TX_CTRL_MLO_LINK: If not @IEEE80211_LINK_UNSPECIFIED, this
+ *	frame should be transmitted on the specific link. This really is
+ *	only relevant for frames that do not have data present, and is
+ *	also not used for 802.3 format frames.
  *
  * These flags are used in tx_info->control.flags.
  */
@@ -882,8 +884,11 @@ enum mac80211_tx_control_flags {
 	IEEE80211_TX_INTCFL_NEED_TXPROCESSING	= BIT(6),
 	IEEE80211_TX_CTRL_NO_SEQNO		= BIT(7),
 	IEEE80211_TX_CTRL_DONT_REORDER		= BIT(8),
+	IEEE80211_TX_CTRL_MLO_LINK		= 0xf0000000,
 };
 
+#define IEEE80211_LINK_UNSPECIFIED	0xf
+
 /**
  * enum mac80211_tx_status_flags - flags to describe transmit status
  *
@@ -1031,7 +1036,9 @@ ieee80211_rate_get_vht_nss(const struct ieee80211_tx_rate *rate)
  *  (3) TX status information - driver tells mac80211 what happened
  *
  * @flags: transmit info flags, defined above
- * @band: the band to transmit on (use for checking for races)
+ * @band: the band to transmit on (use e.g. for checking for races),
+ *	not valid if the interface is an MLD since we won't know which
+ *	link the frame will be transmitted on
  * @hw_queue: HW queue to put the frame on, skb_get_queue_mapping() gives the AC
  * @ack_frame_id: internal frame ID for TX status, used internally
  * @tx_time_est: TX time estimate in units of 4us, used internally
@@ -1702,21 +1709,55 @@ enum ieee80211_offload_flags {
 };
 
 /**
+ * struct ieee80211_vif_cfg - interface configuration
+ * @assoc: association status
+ * @ibss_joined: indicates whether this station is part of an IBSS or not
+ * @ibss_creator: indicates if a new IBSS network is being created
+ * @aid: association ID number, valid only when @assoc is true
+ * @arp_addr_list: List of IPv4 addresses for hardware ARP filtering. The
+ *	may filter ARP queries targeted for other addresses than listed here.
+ *	The driver must allow ARP queries targeted for all address listed here
+ *	to pass through. An empty list implies no ARP queries need to pass.
+ * @arp_addr_cnt: Number of addresses currently on the list. Note that this
+ *	may be larger than %IEEE80211_BSS_ARP_ADDR_LIST_LEN (the arp_addr_list
+ *	array size), it's up to the driver what to do in that case.
+ * @ssid: The SSID of the current vif. Valid in AP and IBSS mode.
+ * @ssid_len: Length of SSID given in @ssid.
+ * @s1g: BSS is S1G BSS (affects Association Request format).
+ * @idle: This interface is idle. There's also a global idle flag in the
+ *	hardware config which may be more appropriate depending on what
+ *	your driver/device needs to do.
+ */
+struct ieee80211_vif_cfg {
+	/* association related data */
+	bool assoc, ibss_joined;
+	bool ibss_creator;
+	u16 aid;
+
+	__be32 arp_addr_list[IEEE80211_BSS_ARP_ADDR_LIST_LEN];
+	int arp_addr_cnt;
+	u8 ssid[IEEE80211_MAX_SSID_LEN];
+	size_t ssid_len;
+	bool s1g;
+	bool idle;
+};
+
+/**
  * struct ieee80211_vif - per-interface data
  *
  * Data in this structure is continually present for driver
  * use during the life of a virtual interface.
  *
  * @type: type of this virtual interface
+ * @cfg: vif configuration, see &struct ieee80211_vif_cfg
  * @bss_conf: BSS configuration for this interface, either our own
  *	or the BSS we're associated to
+ * @link_conf: in case of MLD, the per-link BSS configuration,
+ *	indexed by link ID
+ * @valid_links: bitmap of valid links, or 0 for non-MLO.
  * @addr: address of this interface
  * @p2p: indicates whether this AP or STA interface is a p2p
  *	interface, i.e. a GO or p2p-sta respectively
- * @csa_active: marks whether a channel switch is going on. Internally it is
- *	write-protected by sdata_lock and local->mtx so holding either is fine
- *	for read access.
- * @mu_mimo_owner: indicates interface owns MU-MIMO capability
  * @driver_flags: flags/capabilities the driver has for this interface,
  *	these need to be set (or cleared) when the interface is added
  *	or, if supported by the driver, the interface type is changed
@@ -1728,11 +1769,6 @@ enum ieee80211_offload_flags {
  *	restrictions.
  * @hw_queue: hardware queue for each AC
  * @cab_queue: content-after-beacon (DTIM beacon really) queue, AP mode only
- * @chanctx_conf: The channel context this interface is assigned to, or %NULL
- *	when it is not assigned. This pointer is RCU-protected due to the TX
- *	path needing to access it; even though the netdev carrier will always
- *	be off when it is %NULL there can still be races and packets could be
- *	processed after it switches back to %NULL.
  * @debugfs_dir: debugfs dentry, can be used by drivers to create own per
  *	interface debug files. Note that it will be NULL for the virtual
  *	monitor interface (if that is requested.)
@@ -1747,27 +1783,22 @@ enum ieee80211_offload_flags {
  *	protected by fq->lock.
  * @offload_flags: 802.3 -> 802.11 enapsulation offload flags, see
  *	&enum ieee80211_offload_flags.
- * @color_change_active: marks whether a color change is ongoing. Internally it is
- *	write-protected by sdata_lock and local->mtx so holding either is fine
- *	for read access.
- * @color_change_color: the bss color that will be used after the change.
  * @mbssid_tx_vif: Pointer to the transmitting interface if MBSSID is enabled.
  */
 struct ieee80211_vif {
 	enum nl80211_iftype type;
+	struct ieee80211_vif_cfg cfg;
 	struct ieee80211_bss_conf bss_conf;
+	struct ieee80211_bss_conf *link_conf[IEEE80211_MLD_MAX_NUM_LINKS];
+	u16 valid_links;
 	u8 addr[ETH_ALEN] __aligned(2);
 	bool p2p;
-	bool csa_active;
-	bool mu_mimo_owner;
 
 	u8 cab_queue;
 	u8 hw_queue[IEEE80211_NUM_ACS];
 
 	struct ieee80211_txq *txq;
 
-	struct ieee80211_chanctx_conf __rcu *chanctx_conf;
-
 	u32 driver_flags;
 	u32 offload_flags;
 
@@ -1780,9 +1811,6 @@ struct ieee80211_vif {
 
 	bool txqs_stopped[IEEE80211_NUM_ACS];
 
-	bool color_change_active;
-	u8 color_change_color;
-
 	struct ieee80211_vif *mbssid_tx_vif;
 
 	/* must be last */
@@ -2046,8 +2074,6 @@ struct ieee80211_sta_txpwr {
 	enum nl80211_tx_power_setting type;
 };
 
-#define MAX_STA_LINKS			15
-
 /**
  * struct ieee80211_link_sta - station Link specific info
  * All link specific info for a STA link for a non MLD STA(single)
@@ -2124,7 +2150,6 @@ struct ieee80211_link_sta {
  * @max_tid_amsdu_len: Maximum A-MSDU size in bytes for this TID
  * @txq: per-TID data TX queues (if driver uses the TXQ abstraction); note that
  *	the last entry (%IEEE80211_NUM_TIDS) is used for non-data frames
- * @multi_link_sta: Identifies if this sta is a MLD STA
  * @deflink: This holds the default link STA information, for non MLO STA all link
  *	specific STA information is accessed through @deflink or through
  *	link[0] which points to address of @deflink. For MLO Link STA
@@ -2136,6 +2161,7 @@ struct ieee80211_link_sta {
  *	@deflink address and remaining would be allocated and the address
  *	would be assigned to link[link_id] where link_id is the id assigned
  *	by the AP.
+ * @valid_links: bitmap of valid links, or 0 for non-MLO
  */
 struct ieee80211_sta {
 	u8 addr[ETH_ALEN];
@@ -2173,9 +2199,9 @@ struct ieee80211_sta {
 
 	struct ieee80211_txq *txq[IEEE80211_NUM_TIDS + 1];
 
-	bool multi_link_sta;
+	u16 valid_links;
 	struct ieee80211_link_sta deflink;
-	struct ieee80211_link_sta *link[MAX_STA_LINKS];
+	struct ieee80211_link_sta __rcu *link[IEEE80211_MLD_MAX_NUM_LINKS];
 
 	/* must be last */
 	u8 drv_priv[] __aligned(sizeof(void *));
@@ -3514,6 +3540,22 @@ struct ieee80211_prep_tx_info {
  *	for association indication. The @changed parameter indicates which
  *	of the bss parameters has changed when a call is made. The callback
  *	can sleep.
+ *	Note: this callback is called if @vif_cfg_changed or @link_info_changed
+ *	are not implemented.
+ *
+ * @vif_cfg_changed: Handler for configuration requests related to interface
+ *	(MLD) parameters from &struct ieee80211_vif_cfg that vary during the
+ *	lifetime of the interface (e.g. assoc status, IP addresses, etc.)
+ *	The @changed parameter indicates which value changed.
+ *	The callback can sleep.
+ *
+ * @link_info_changed: Handler for configuration requests related to link
+ *	parameters from &struct ieee80211_bss_conf that are related to an
+ *	individual link. e.g. legacy/HT/VHT/... rate information.
+ *	The @changed parameter indicates which value changed, and the @link_id
+ *	parameter indicates the link ID. Note that the @link_id will be 0 for
+ *	non-MLO connections.
+ *	The callback can sleep.
  *
  * @prepare_multicast: Prepare for multicast filter configuration.
  *	This callback is optional, and its return value is passed
@@ -3999,6 +4041,18 @@ struct ieee80211_prep_tx_info {
  *	disable background CAC/radar detection.
  * @net_fill_forward_path: Called from .ndo_fill_forward_path in order to
  *	resolve a path for hardware flow offloading
+ * @change_vif_links: Change the valid links on an interface, note that while
+ *	removing the old link information is still valid (link_conf pointer),
+ *	but may immediately disappear after the function returns. The old or
+ *	new links bitmaps may be 0 if going from/to a non-MLO situation.
+ *	The @old array contains pointers to the old bss_conf structures
+ *	that were already removed, in case they're needed.
+ *	This callback can sleep.
+ * @change_sta_links: Change the valid links of a station, similar to
+ *	@change_vif_links. This callback can sleep.
+ *	Note that a sta can also be inserted or removed with valid links,
+ *	i.e. passed to @sta_add/@sta_state with sta->valid_links not zero.
+ *	In fact, cannot change from having valid_links and not having them.
  */
 struct ieee80211_ops {
 	void (*tx)(struct ieee80211_hw *hw,
@@ -4022,10 +4076,18 @@ struct ieee80211_ops {
 	void (*bss_info_changed)(struct ieee80211_hw *hw,
 				 struct ieee80211_vif *vif,
 				 struct ieee80211_bss_conf *info,
-				 u32 changed);
+				 u64 changed);
+	void (*vif_cfg_changed)(struct ieee80211_hw *hw,
+				struct ieee80211_vif *vif,
+				u64 changed);
+	void (*link_info_changed)(struct ieee80211_hw *hw,
+				  struct ieee80211_vif *vif,
+				  unsigned int link_id, u64 changed);
 
-	int (*start_ap)(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
-	void (*stop_ap)(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
+	int (*start_ap)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+			unsigned int link_id);
+	void (*stop_ap)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+			unsigned int link_id);
 
 	u64 (*prepare_multicast)(struct ieee80211_hw *hw,
 				 struct netdev_hw_addr_list *mc_list);
@@ -4227,9 +4289,11 @@ struct ieee80211_ops {
 			       u32 changed);
 	int (*assign_vif_chanctx)(struct ieee80211_hw *hw,
 				  struct ieee80211_vif *vif,
+				  unsigned int link_id,
 				  struct ieee80211_chanctx_conf *ctx);
 	void (*unassign_vif_chanctx)(struct ieee80211_hw *hw,
 				     struct ieee80211_vif *vif,
+				     unsigned int link_id,
 				     struct ieee80211_chanctx_conf *ctx);
 	int (*switch_vif_chanctx)(struct ieee80211_hw *hw,
 				  struct ieee80211_vif_chanctx_switch *vifs,
@@ -4334,6 +4398,14 @@ struct ieee80211_ops {
 				     struct ieee80211_sta *sta,
 				     struct net_device_path_ctx *ctx,
 				     struct net_device_path *path);
+	int (*change_vif_links)(struct ieee80211_hw *hw,
+				struct ieee80211_vif *vif,
+				u16 old_links, u16 new_links,
+				struct ieee80211_bss_conf *old[IEEE80211_MLD_MAX_NUM_LINKS]);
+	int (*change_sta_links)(struct ieee80211_hw *hw,
+				struct ieee80211_vif *vif,
+				struct ieee80211_sta *sta,
+				u16 old_links, u16 new_links);
 };
 
 /**
@@ -4997,6 +5069,7 @@ struct ieee80211_mutable_offsets {
  * @vif: &struct ieee80211_vif pointer from the add_interface callback.
  * @offs: &struct ieee80211_mutable_offsets pointer to struct that will
  *	receive the offsets that may be updated by the driver.
+ * @link_id: the link id to which the beacon belongs (or 0 for a non-MLD AP)
  *
  * If the driver implements beaconing modes, it must use this function to
  * obtain the beacon template.
@@ -5013,7 +5086,8 @@ struct ieee80211_mutable_offsets {
 struct sk_buff *
 ieee80211_beacon_get_template(struct ieee80211_hw *hw,
 			      struct ieee80211_vif *vif,
-			      struct ieee80211_mutable_offsets *offs);
+			      struct ieee80211_mutable_offsets *offs,
+			      unsigned int link_id);
 
 /**
  * ieee80211_beacon_get_tim - beacon generation function
@@ -5024,6 +5098,7 @@ ieee80211_beacon_get_template(struct ieee80211_hw *hw,
  * @tim_length: pointer to variable that will receive the TIM IE length,
  *	(including the ID and length bytes!).
  *	Set to 0 if invalid (in non-AP modes).
+ * @link_id: the link id to which the beacon belongs (or 0 for a non-MLD AP)
  *
  * If the driver implements beaconing modes, it must use this function to
  * obtain the beacon frame.
@@ -5039,21 +5114,24 @@ ieee80211_beacon_get_template(struct ieee80211_hw *hw,
  */
 struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw,
 					 struct ieee80211_vif *vif,
-					 u16 *tim_offset, u16 *tim_length);
+					 u16 *tim_offset, u16 *tim_length,
+					 unsigned int link_id);
 
 /**
  * ieee80211_beacon_get - beacon generation function
  * @hw: pointer obtained from ieee80211_alloc_hw().
  * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @link_id: the link id to which the beacon belongs (or 0 for a non-MLD AP)
  *
  * See ieee80211_beacon_get_tim().
  *
  * Return: See ieee80211_beacon_get_tim().
  */
 static inline struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
-						   struct ieee80211_vif *vif)
+						   struct ieee80211_vif *vif,
+						   unsigned int link_id)
 {
-	return ieee80211_beacon_get_tim(hw, vif, NULL, NULL);
+	return ieee80211_beacon_get_tim(hw, vif, NULL, NULL, link_id);
 }
 
 /**
@@ -6160,7 +6238,7 @@ void ieee80211_chswitch_done(struct ieee80211_vif *vif, bool success);
 
 /**
  * ieee80211_channel_switch_disconnect - disconnect due to channel switch error
- * @vif &struct ieee80211_vif pointer from the add_interface callback.
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
  * @block_tx: if %true, do not send deauth frame.
  *
  * Instruct mac80211 to disconnect due to a channel switch error. The channel
@@ -6173,13 +6251,14 @@ void ieee80211_channel_switch_disconnect(struct ieee80211_vif *vif,
 /**
  * ieee80211_request_smps - request SM PS transition
  * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @link_id: link ID for MLO, or 0
  * @smps_mode: new SM PS mode
  *
  * This allows the driver to request an SM PS transition in managed
  * mode. This is useful when the driver has more information than
  * the stack about possible interference, for example by bluetooth.
  */
-void ieee80211_request_smps(struct ieee80211_vif *vif,
+void ieee80211_request_smps(struct ieee80211_vif *vif, unsigned int link_id,
 			    enum ieee80211_smps_mode smps_mode);
 
 /**
@@ -6511,6 +6590,7 @@ ieee80211_vif_type_p2p(struct ieee80211_vif *vif)
  * ieee80211_update_mu_groups - set the VHT MU-MIMO groud data
  *
  * @vif: the specified virtual interface
+ * @link_id: the link ID for MLO, otherwise 0
  * @membership: 64 bits array - a bit is set if station is member of the group
  * @position: 2 bits per group id indicating the position in the group
  *
@@ -6519,7 +6599,7 @@ ieee80211_vif_type_p2p(struct ieee80211_vif *vif)
  * matching GroupId management frame.
  * Calls to this function need to be serialized with RX path.
  */
-void ieee80211_update_mu_groups(struct ieee80211_vif *vif,
+void ieee80211_update_mu_groups(struct ieee80211_vif *vif, unsigned int link_id,
 				const u8 *membership, const u8 *position);
 
 void ieee80211_enable_rssi_reports(struct ieee80211_vif *vif,
@@ -6752,6 +6832,9 @@ static inline void ieee80211_txq_schedule_end(struct ieee80211_hw *hw, u8 ac)
 {
 }
 
+void __ieee80211_schedule_txq(struct ieee80211_hw *hw,
+			      struct ieee80211_txq *txq, bool force);
+
 /**
  * ieee80211_schedule_txq - schedule a TXQ for transmission
  *
@@ -6764,7 +6847,11 @@ static inline void ieee80211_txq_schedule_end(struct ieee80211_hw *hw, u8 ac)
  * The driver may call this function if it has buffered packets for
  * this TXQ internally.
  */
-void ieee80211_schedule_txq(struct ieee80211_hw *hw, struct ieee80211_txq *txq);
+static inline void
+ieee80211_schedule_txq(struct ieee80211_hw *hw, struct ieee80211_txq *txq)
+{
+	__ieee80211_schedule_txq(hw, txq, true);
+}
 
 /**
  * ieee80211_return_txq - return a TXQ previously acquired by ieee80211_next_txq()
@@ -6776,8 +6863,12 @@ void ieee80211_schedule_txq(struct ieee80211_hw *hw, struct ieee80211_txq *txq);
  * The driver may set force=true if it has buffered packets for this TXQ
  * internally.
  */
-void ieee80211_return_txq(struct ieee80211_hw *hw, struct ieee80211_txq *txq,
-			  bool force);
+static inline void
+ieee80211_return_txq(struct ieee80211_hw *hw, struct ieee80211_txq *txq,
+		     bool force)
+{
+	__ieee80211_schedule_txq(hw, txq, force);
+}
 
 /**
  * ieee80211_txq_may_transmit - check whether TXQ is allowed to transmit
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 98f905f16411..7bb1ae59f3a5 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -324,6 +324,17 @@
  */
 
 /**
+ * DOC: Multi-Link Operation
+ *
+ * In Multi-Link Operation, a connection between to MLDs utilizes multiple
+ * links. To use this in nl80211, various commands and responses now need
+ * to or will include the new %NL80211_ATTR_MLO_LINKS attribute.
+ * Additionally, various commands that need to operate on a specific link
+ * now need to be given the %NL80211_ATTR_MLO_LINK_ID attribute, e.g. to
+ * use %NL80211_CMD_START_AP or similar functions.
+ */
+
+/**
  * enum nl80211_commands - supported nl80211 commands
  *
  * @NL80211_CMD_UNSPEC: unspecified command to catch errors
@@ -1237,6 +1248,12 @@
  *      to describe the BSSID address of the AP and %NL80211_ATTR_TIMEOUT to
  *      specify the timeout value.
  *
+ * @NL80211_CMD_ADD_LINK: Add a new link to an interface. The
+ *	%NL80211_ATTR_MLO_LINK_ID attribute is used for the new link.
+ * @NL80211_CMD_REMOVE_LINK: Remove a link from an interface. This may come
+ *	without %NL80211_ATTR_MLO_LINK_ID as an easy way to remove all links
+ *	in preparation for e.g. roaming to a regular (non-MLO) AP.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -1481,6 +1498,9 @@ enum nl80211_commands {
 
 	NL80211_CMD_ASSOC_COMEBACK,
 
+	NL80211_CMD_ADD_LINK,
+	NL80211_CMD_REMOVE_LINK,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -2663,6 +2683,24 @@ enum nl80211_commands {
  *	association request when used with NL80211_CMD_NEW_STATION). Can be set
  *	only if %NL80211_STA_FLAG_WME is set.
  *
+ * @NL80211_ATTR_MLO_LINK_ID: A (u8) link ID for use with MLO, to be used with
+ *	various commands that need a link ID to operate.
+ * @NL80211_ATTR_MLO_LINKS: A nested array of links, each containing some
+ *	per-link information and a link ID.
+ * @NL80211_ATTR_MLD_ADDR: An MLD address, used with various commands such as
+ *	authenticate/associate.
+ *
+ * @NL80211_ATTR_MLO_SUPPORT: Flag attribute to indicate user space supports MLO
+ *	connection. Used with %NL80211_CMD_CONNECT. If this attribute is not
+ *	included in NL80211_CMD_CONNECT drivers must not perform MLO connection.
+ *
+ * @NL80211_ATTR_MAX_NUM_AKM_SUITES: U16 attribute. Indicates maximum number of
+ *	AKM suites allowed for %NL80211_CMD_CONNECT, %NL80211_CMD_ASSOCIATE and
+ *	%NL80211_CMD_START_AP in %NL80211_CMD_GET_WIPHY response. If this
+ *	attribute is not present userspace shall consider maximum number of AKM
+ *	suites allowed as %NL80211_MAX_NR_AKM_SUITES which is the legacy maximum
+ *	number prior to the introduction of this attribute.
+ *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -3177,6 +3215,14 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_DISABLE_EHT,
 
+	NL80211_ATTR_MLO_LINKS,
+	NL80211_ATTR_MLO_LINK_ID,
+	NL80211_ATTR_MLD_ADDR,
+
+	NL80211_ATTR_MLO_SUPPORT,
+
+	NL80211_ATTR_MAX_NUM_AKM_SUITES,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -3231,6 +3277,11 @@ enum nl80211_attrs {
 #define NL80211_HE_MIN_CAPABILITY_LEN           16
 #define NL80211_HE_MAX_CAPABILITY_LEN           54
 #define NL80211_MAX_NR_CIPHER_SUITES		5
+
+/*
+ * NL80211_MAX_NR_AKM_SUITES is obsolete when %NL80211_ATTR_MAX_NUM_AKM_SUITES
+ * present in %NL80211_CMD_GET_WIPHY response.
+ */
 #define NL80211_MAX_NR_AKM_SUITES		2
 #define NL80211_EHT_MIN_CAPABILITY_LEN          13
 #define NL80211_EHT_MAX_CAPABILITY_LEN          51
@@ -4853,6 +4904,7 @@ enum nl80211_bss_scan_width {
  *	Contains a nested array of signal strength attributes (u8, dBm),
  *	using the nesting index as the antenna number.
  * @NL80211_BSS_FREQUENCY_OFFSET: frequency offset in KHz
+ * @NL80211_BSS_MLO_LINK_ID: MLO link ID of the BSS (u8).
  * @__NL80211_BSS_AFTER_LAST: internal
  * @NL80211_BSS_MAX: highest BSS attribute
  */
@@ -4878,6 +4930,7 @@ enum nl80211_bss {
 	NL80211_BSS_PARENT_BSSID,
 	NL80211_BSS_CHAIN_SIGNAL,
 	NL80211_BSS_FREQUENCY_OFFSET,
+	NL80211_BSS_MLO_LINK_ID,
 
 	/* keep last */
 	__NL80211_BSS_AFTER_LAST,