diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2020-04-01 02:13:09 +0300 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2020-04-01 02:13:09 +0300 |
commit | dfabb077d62552797ca0ae7756cb30d3e195ead5 (patch) | |
tree | 79493fc7bc67b952386e9bc4321387cb168cb312 /include | |
parent | 5b67fbfc32b544daa7f4e0f4e0ecdec4e4895938 (diff) | |
parent | 92075d98abf0f42db1cb518150364f196d4ad217 (diff) |
Merge tag 'mmc-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Add support for host software queue for (e)MMC/SD
- Throttle polling rate for CMD6
- Update CMD13 busy condition check for CMD6 commands
- Improve busy detect polling for erase/trim/discard/HPI
- Fixup support for HW busy detection for HPI commands
- Re-work and improve support for eMMC sanitize commands
MMC host:
- mmci:
* Add support for sdmmc variant revision 2.0
- mmci_sdmmc:
* Improve support for busyend detection
* Fixup support for signal voltage switch
* Add support for tuning with delay block
- mtk-sd:
* Fix another SDIO irq issue
- sdhci:
* Disable native card detect when GPIO based type exist
- sdhci:
* Add option to defer request completion
- sdhci_am654:
* Add support to set a tap value per speed mode
- sdhci-esdhc-imx:
* Add support for i.MX8MM based variant
* Fixup support for standard tuning on i.MX8 usdhc
* Optimize for strobe/clock dll settings
* Fixup support for system and runtime suspend/resume
- sdhci-iproc:
* Update regulator/bus-voltage management for bcm2711
- sdhci-msm:
* Prevent clock gating with PWRSAVE_DLL on broken variants
* Fix management of CQE during SDHCI reset
- sdhci-of-arasan:
* Add support for auto tuning on ZynqMP based platforms
- sdhci-omap:
* Add support for system suspend/resume
- sdhci-sprd:
* Add support for HW busy detection
* Enable support host software queue
- sdhci-tegra:
* Add support for HW busy detection
- tmio/renesas_sdhi:
* Enforce retune after runtime suspend
- renesas_sdhi:
* Use manual tap correction for HS400 on some variants
* Add support for manual correction of tap values for tunings"
* tag 'mmc-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (86 commits)
mmc: cavium-octeon: remove nonsense variable coercion
mmc: mediatek: fix SDIO irq issue
mmc: mmci_sdmmc: Fix clear busyd0end irq flag
dt-bindings: mmc: Fix node name in an example
mmc: core: Re-work the code for eMMC sanitize
mmc: sdhci: use FIELD_GET for preset value bit masks
mmc: sdhci-of-at91: Display clock changes for debug purpose only
mmc: sdhci: iproc: Add custom set_power() callback for bcm2711
mmc: sdhci: am654: Use sdhci_set_power_and_voltage()
mmc: sdhci: at91: Use sdhci_set_power_and_voltage()
mmc: sdhci: milbeaut: Use sdhci_set_power_and_voltage()
mmc: sdhci: arasan: Use sdhci_set_power_and_voltage()
mmc: sdhci: Introduce sdhci_set_power_and_bus_voltage()
mmc: vub300: Use scnprintf() for avoiding potential buffer overflow
dt-bindings: mmc: synopsys-dw-mshc: fix clock-freq-min-max in example
sdhci: tegra: Enable MMC_CAP_WAIT_WHILE_BUSY host capability
sdhci: tegra: Implement Tegra specific set_timeout callback
mmc: sdhci-omap: Add Support for Suspend/Resume
mmc: renesas_sdhi: simplify execute_tuning
mmc: renesas_sdhi: Use BITS_PER_LONG helper
...
Diffstat (limited to 'include')
-rw-r--r-- | include/linux/firmware/xlnx-zynqmp.h | 9 | ||||
-rw-r--r-- | include/linux/mmc/core.h | 3 | ||||
-rw-r--r-- | include/linux/mmc/host.h | 7 | ||||
-rw-r--r-- | include/linux/mmc/mmc.h | 10 | ||||
-rw-r--r-- | include/linux/mmc/sdio_func.h | 2 | ||||
-rw-r--r-- | include/linux/platform_data/mmc-esdhc-imx.h | 1 | ||||
-rw-r--r-- | include/uapi/linux/mmc/ioctl.h | 2 |
7 files changed, 27 insertions, 7 deletions
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h index 2cd12ebd6826..c8c42214e7fb 100644 --- a/include/linux/firmware/xlnx-zynqmp.h +++ b/include/linux/firmware/xlnx-zynqmp.h @@ -100,7 +100,8 @@ enum pm_ret_status { }; enum pm_ioctl_id { - IOCTL_SET_SD_TAPDELAY = 7, + IOCTL_SD_DLL_RESET = 6, + IOCTL_SET_SD_TAPDELAY, IOCTL_SET_PLL_FRAC_MODE, IOCTL_GET_PLL_FRAC_MODE, IOCTL_SET_PLL_FRAC_DATA, @@ -271,6 +272,12 @@ enum tap_delay_type { PM_TAPDELAY_OUTPUT, }; +enum dll_reset_type { + PM_DLL_RESET_ASSERT, + PM_DLL_RESET_RELEASE, + PM_DLL_RESET_PULSE, +}; + /** * struct zynqmp_pm_query_data - PM query data * @qid: query ID diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h index b7ba8810a3b5..29aa50711626 100644 --- a/include/linux/mmc/core.h +++ b/include/linux/mmc/core.h @@ -107,9 +107,6 @@ struct mmc_command { */ unsigned int busy_timeout; /* busy detect timeout in ms */ - /* Set this flag only for blocking sanitize request */ - bool sanitize_busy; - struct mmc_data *data; /* data segment associated with cmd */ struct mmc_request *mrq; /* associated request */ }; diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 4c5eb3aa8e72..c318fb5b6a94 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -322,6 +322,8 @@ struct mmc_host { #define MMC_CAP_3_3V_DDR (1 << 11) /* Host supports eMMC DDR 3.3V */ #define MMC_CAP_1_8V_DDR (1 << 12) /* Host supports eMMC DDR 1.8V */ #define MMC_CAP_1_2V_DDR (1 << 13) /* Host supports eMMC DDR 1.2V */ +#define MMC_CAP_DDR (MMC_CAP_3_3V_DDR | MMC_CAP_1_8V_DDR | \ + MMC_CAP_1_2V_DDR) #define MMC_CAP_POWER_OFF_CARD (1 << 14) /* Can power off after boot */ #define MMC_CAP_BUS_WIDTH_TEST (1 << 15) /* CMD14/CMD19 bus width ok */ #define MMC_CAP_UHS_SDR12 (1 << 16) /* Host supports UHS SDR12 mode */ @@ -463,7 +465,10 @@ struct mmc_host { bool cqe_enabled; bool cqe_on; - unsigned long private[0] ____cacheline_aligned; + /* Host Software Queue support */ + bool hsq_enabled; + + unsigned long private[] ____cacheline_aligned; }; struct device_node; diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index 897a87c4c827..4b85ef05a906 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -161,6 +161,16 @@ static inline bool mmc_op_multi(u32 opcode) #define R1_STATE_PRG 7 #define R1_STATE_DIS 8 +static inline bool mmc_ready_for_data(u32 status) +{ + /* + * Some cards mishandle the status bits, so make sure to check both the + * busy indication and the card state. + */ + return status & R1_READY_FOR_DATA && + R1_CURRENT_STATE(status) == R1_STATE_TRAN; +} + /* * MMC/SD in SPI mode reports R1 status always, and R2 for SEND_STATUS * R1 is the low order byte; R2 is the next highest byte, when present. diff --git a/include/linux/mmc/sdio_func.h b/include/linux/mmc/sdio_func.h index 5a177f7a83c3..fa2aaab5e57a 100644 --- a/include/linux/mmc/sdio_func.h +++ b/include/linux/mmc/sdio_func.h @@ -25,7 +25,7 @@ struct sdio_func_tuple { struct sdio_func_tuple *next; unsigned char code; unsigned char size; - unsigned char data[0]; + unsigned char data[]; }; /* diff --git a/include/linux/platform_data/mmc-esdhc-imx.h b/include/linux/platform_data/mmc-esdhc-imx.h index 6c006078c8a1..0434f68eda86 100644 --- a/include/linux/platform_data/mmc-esdhc-imx.h +++ b/include/linux/platform_data/mmc-esdhc-imx.h @@ -37,5 +37,6 @@ struct esdhc_platform_data { unsigned int delay_line; unsigned int tuning_step; /* The delay cell steps in tuning procedure */ unsigned int tuning_start_tap; /* The start delay cell point in tuning procedure */ + unsigned int strobe_dll_delay_target; /* The delay cell for strobe pad (read clock) */ }; #endif /* __ASM_ARCH_IMX_ESDHC_H */ diff --git a/include/uapi/linux/mmc/ioctl.h b/include/uapi/linux/mmc/ioctl.h index 00c08120f3ba..98e29e7f54ac 100644 --- a/include/uapi/linux/mmc/ioctl.h +++ b/include/uapi/linux/mmc/ioctl.h @@ -57,7 +57,7 @@ struct mmc_ioc_cmd { */ struct mmc_ioc_multi_cmd { __u64 num_of_cmds; - struct mmc_ioc_cmd cmds[0]; + struct mmc_ioc_cmd cmds[]; }; #define MMC_IOC_CMD _IOWR(MMC_BLOCK_MAJOR, 0, struct mmc_ioc_cmd) |