diff options
Diffstat (limited to 'drivers/pinctrl')
| -rw-r--r-- | drivers/pinctrl/sunxi/pinctrl-sunxi.c | 119 | ||||
| -rw-r--r-- | drivers/pinctrl/sunxi/pinctrl-sunxi.h | 93 |
2 files changed, 89 insertions, 123 deletions
diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c index eb3d595f816a..78b7ab69d7a5 100644 --- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c +++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c @@ -46,6 +46,63 @@ static struct lock_class_key sunxi_pinctrl_irq_request_class; static struct irq_chip sunxi_pinctrl_edge_irq_chip; static struct irq_chip sunxi_pinctrl_level_irq_chip; +/* + * The sunXi PIO registers are organized as a series of banks, with registers + * for each bank in the following order: + * - Mux config + * - Data value + * - Drive level + * - Pull direction + * + * Multiple consecutive registers are used for fields wider than one bit. + * + * The following functions calculate the register and the bit offset to access. + * They take a pin number which is relative to the start of the current device. + */ +static void sunxi_mux_reg(u32 pin, u32 *reg, u32 *shift, u32 *mask) +{ + u32 bank = pin / PINS_PER_BANK; + u32 offset = pin % PINS_PER_BANK * MUX_FIELD_WIDTH; + + *reg = bank * BANK_MEM_SIZE + MUX_REGS_OFFSET + + offset / BITS_PER_TYPE(u32) * sizeof(u32); + *shift = offset % BITS_PER_TYPE(u32); + *mask = (BIT(MUX_FIELD_WIDTH) - 1) << *shift; +} + +static void sunxi_data_reg(u32 pin, u32 *reg, u32 *shift, u32 *mask) +{ + u32 bank = pin / PINS_PER_BANK; + u32 offset = pin % PINS_PER_BANK * DATA_FIELD_WIDTH; + + *reg = bank * BANK_MEM_SIZE + DATA_REGS_OFFSET + + offset / BITS_PER_TYPE(u32) * sizeof(u32); + *shift = offset % BITS_PER_TYPE(u32); + *mask = (BIT(DATA_FIELD_WIDTH) - 1) << *shift; +} + +static void sunxi_dlevel_reg(u32 pin, u32 *reg, u32 *shift, u32 *mask) +{ + u32 bank = pin / PINS_PER_BANK; + u32 offset = pin % PINS_PER_BANK * DLEVEL_FIELD_WIDTH; + + *reg = bank * BANK_MEM_SIZE + DLEVEL_REGS_OFFSET + + offset / BITS_PER_TYPE(u32) * sizeof(u32); + *shift = offset % BITS_PER_TYPE(u32); + *mask = (BIT(DLEVEL_FIELD_WIDTH) - 1) << *shift; +} + +static void sunxi_pull_reg(u32 pin, u32 *reg, u32 *shift, u32 *mask) +{ + u32 bank = pin / PINS_PER_BANK; + u32 offset = pin % PINS_PER_BANK * PULL_FIELD_WIDTH; + + *reg = bank * BANK_MEM_SIZE + PULL_REGS_OFFSET + + offset / BITS_PER_TYPE(u32) * sizeof(u32); + *shift = offset % BITS_PER_TYPE(u32); + *mask = (BIT(PULL_FIELD_WIDTH) - 1) << *shift; +} + static struct sunxi_pinctrl_group * sunxi_pinctrl_find_group_by_name(struct sunxi_pinctrl *pctl, const char *group) { @@ -452,21 +509,17 @@ static const struct pinctrl_ops sunxi_pctrl_ops = { }; static int sunxi_pconf_reg(unsigned pin, enum pin_config_param param, - u32 *offset, u32 *shift, u32 *mask) + u32 *reg, u32 *shift, u32 *mask) { switch (param) { case PIN_CONFIG_DRIVE_STRENGTH: - *offset = sunxi_dlevel_reg(pin); - *shift = sunxi_dlevel_offset(pin); - *mask = DLEVEL_PINS_MASK; + sunxi_dlevel_reg(pin, reg, shift, mask); break; case PIN_CONFIG_BIAS_PULL_UP: case PIN_CONFIG_BIAS_PULL_DOWN: case PIN_CONFIG_BIAS_DISABLE: - *offset = sunxi_pull_reg(pin); - *shift = sunxi_pull_offset(pin); - *mask = PULL_PINS_MASK; + sunxi_pull_reg(pin, reg, shift, mask); break; default: @@ -481,17 +534,17 @@ static int sunxi_pconf_get(struct pinctrl_dev *pctldev, unsigned pin, { struct sunxi_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); enum pin_config_param param = pinconf_to_config_param(*config); - u32 offset, shift, mask, val; + u32 reg, shift, mask, val; u16 arg; int ret; pin -= pctl->desc->pin_base; - ret = sunxi_pconf_reg(pin, param, &offset, &shift, &mask); + ret = sunxi_pconf_reg(pin, param, ®, &shift, &mask); if (ret < 0) return ret; - val = (readl(pctl->membase + offset) >> shift) & mask; + val = (readl(pctl->membase + reg) & mask) >> shift; switch (pinconf_to_config_param(*config)) { case PIN_CONFIG_DRIVE_STRENGTH: @@ -545,16 +598,15 @@ static int sunxi_pconf_set(struct pinctrl_dev *pctldev, unsigned pin, int i; for (i = 0; i < num_configs; i++) { + u32 arg, reg, shift, mask, val; enum pin_config_param param; unsigned long flags; - u32 offset, shift, mask, reg; - u32 arg, val; int ret; param = pinconf_to_config_param(configs[i]); arg = pinconf_to_config_argument(configs[i]); - ret = sunxi_pconf_reg(pin, param, &offset, &shift, &mask); + ret = sunxi_pconf_reg(pin, param, ®, &shift, &mask); if (ret < 0) return ret; @@ -591,9 +643,8 @@ static int sunxi_pconf_set(struct pinctrl_dev *pctldev, unsigned pin, } raw_spin_lock_irqsave(&pctl->lock, flags); - reg = readl(pctl->membase + offset); - reg &= ~(mask << shift); - writel(reg | val << shift, pctl->membase + offset); + writel((readl(pctl->membase + reg) & ~mask) | val << shift, + pctl->membase + reg); raw_spin_unlock_irqrestore(&pctl->lock, flags); } /* for each config */ @@ -719,16 +770,16 @@ static void sunxi_pmx_set(struct pinctrl_dev *pctldev, u8 config) { struct sunxi_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); + u32 reg, shift, mask; unsigned long flags; - u32 val, mask; + + pin -= pctl->desc->pin_base; + sunxi_mux_reg(pin, ®, &shift, &mask); raw_spin_lock_irqsave(&pctl->lock, flags); - pin -= pctl->desc->pin_base; - val = readl(pctl->membase + sunxi_mux_reg(pin)); - mask = MUX_PINS_MASK << sunxi_mux_offset(pin); - writel((val & ~mask) | config << sunxi_mux_offset(pin), - pctl->membase + sunxi_mux_reg(pin)); + writel((readl(pctl->membase + reg) & ~mask) | config << shift, + pctl->membase + reg); raw_spin_unlock_irqrestore(&pctl->lock, flags); } @@ -861,43 +912,43 @@ static int sunxi_pinctrl_gpio_direction_input(struct gpio_chip *chip, static int sunxi_pinctrl_gpio_get(struct gpio_chip *chip, unsigned offset) { struct sunxi_pinctrl *pctl = gpiochip_get_data(chip); - u32 reg = sunxi_data_reg(offset); - u8 index = sunxi_data_offset(offset); bool set_mux = pctl->desc->irq_read_needs_mux && gpiochip_line_is_irq(chip, offset); u32 pin = offset + chip->base; - u32 val; + u32 reg, shift, mask, val; + + sunxi_data_reg(offset, ®, &shift, &mask); if (set_mux) sunxi_pmx_set(pctl->pctl_dev, pin, SUN4I_FUNC_INPUT); - val = (readl(pctl->membase + reg) >> index) & DATA_PINS_MASK; + val = (readl(pctl->membase + reg) & mask) >> shift; if (set_mux) sunxi_pmx_set(pctl->pctl_dev, pin, SUN4I_FUNC_IRQ); - return !!val; + return val; } static void sunxi_pinctrl_gpio_set(struct gpio_chip *chip, unsigned offset, int value) { struct sunxi_pinctrl *pctl = gpiochip_get_data(chip); - u32 reg = sunxi_data_reg(offset); - u8 index = sunxi_data_offset(offset); + u32 reg, shift, mask, val; unsigned long flags; - u32 regval; + + sunxi_data_reg(offset, ®, &shift, &mask); raw_spin_lock_irqsave(&pctl->lock, flags); - regval = readl(pctl->membase + reg); + val = readl(pctl->membase + reg); if (value) - regval |= BIT(index); + val |= mask; else - regval &= ~(BIT(index)); + val &= ~mask; - writel(regval, pctl->membase + reg); + writel(val, pctl->membase + reg); raw_spin_unlock_irqrestore(&pctl->lock, flags); } diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.h b/drivers/pinctrl/sunxi/pinctrl-sunxi.h index 0f1aab58650c..efaa97457e08 100644 --- a/drivers/pinctrl/sunxi/pinctrl-sunxi.h +++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.h @@ -36,23 +36,15 @@ #define BANK_MEM_SIZE 0x24 #define MUX_REGS_OFFSET 0x0 +#define MUX_FIELD_WIDTH 4 #define DATA_REGS_OFFSET 0x10 +#define DATA_FIELD_WIDTH 1 #define DLEVEL_REGS_OFFSET 0x14 +#define DLEVEL_FIELD_WIDTH 2 #define PULL_REGS_OFFSET 0x1c +#define PULL_FIELD_WIDTH 2 #define PINS_PER_BANK 32 -#define MUX_PINS_PER_REG 8 -#define MUX_PINS_BITS 4 -#define MUX_PINS_MASK 0x0f -#define DATA_PINS_PER_REG 32 -#define DATA_PINS_BITS 1 -#define DATA_PINS_MASK 0x01 -#define DLEVEL_PINS_PER_REG 16 -#define DLEVEL_PINS_BITS 2 -#define DLEVEL_PINS_MASK 0x03 -#define PULL_PINS_PER_REG 16 -#define PULL_PINS_BITS 2 -#define PULL_PINS_MASK 0x03 #define IRQ_PER_BANK 32 @@ -222,83 +214,6 @@ struct sunxi_pinctrl { .irqnum = _irq, \ } -/* - * The sunXi PIO registers are organized as is: - * 0x00 - 0x0c Muxing values. - * 8 pins per register, each pin having a 4bits value - * 0x10 Pin values - * 32 bits per register, each pin corresponding to one bit - * 0x14 - 0x18 Drive level - * 16 pins per register, each pin having a 2bits value - * 0x1c - 0x20 Pull-Up values - * 16 pins per register, each pin having a 2bits value - * - * This is for the first bank. Each bank will have the same layout, - * with an offset being a multiple of 0x24. - * - * The following functions calculate from the pin number the register - * and the bit offset that we should access. - */ -static inline u32 sunxi_mux_reg(u16 pin) -{ - u8 bank = pin / PINS_PER_BANK; - u32 offset = bank * BANK_MEM_SIZE; - offset += MUX_REGS_OFFSET; - offset += pin % PINS_PER_BANK / MUX_PINS_PER_REG * 0x04; - return round_down(offset, 4); -} - -static inline u32 sunxi_mux_offset(u16 pin) -{ - u32 pin_num = pin % MUX_PINS_PER_REG; - return pin_num * MUX_PINS_BITS; -} - -static inline u32 sunxi_data_reg(u16 pin) -{ - u8 bank = pin / PINS_PER_BANK; - u32 offset = bank * BANK_MEM_SIZE; - offset += DATA_REGS_OFFSET; - offset += pin % PINS_PER_BANK / DATA_PINS_PER_REG * 0x04; - return round_down(offset, 4); -} - -static inline u32 sunxi_data_offset(u16 pin) -{ - u32 pin_num = pin % DATA_PINS_PER_REG; - return pin_num * DATA_PINS_BITS; -} - -static inline u32 sunxi_dlevel_reg(u16 pin) -{ - u8 bank = pin / PINS_PER_BANK; - u32 offset = bank * BANK_MEM_SIZE; - offset += DLEVEL_REGS_OFFSET; - offset += pin % PINS_PER_BANK / DLEVEL_PINS_PER_REG * 0x04; - return round_down(offset, 4); -} - -static inline u32 sunxi_dlevel_offset(u16 pin) -{ - u32 pin_num = pin % DLEVEL_PINS_PER_REG; - return pin_num * DLEVEL_PINS_BITS; -} - -static inline u32 sunxi_pull_reg(u16 pin) -{ - u8 bank = pin / PINS_PER_BANK; - u32 offset = bank * BANK_MEM_SIZE; - offset += PULL_REGS_OFFSET; - offset += pin % PINS_PER_BANK / PULL_PINS_PER_REG * 0x04; - return round_down(offset, 4); -} - -static inline u32 sunxi_pull_offset(u16 pin) -{ - u32 pin_num = pin % PULL_PINS_PER_REG; - return pin_num * PULL_PINS_BITS; -} - static inline u32 sunxi_irq_hw_bank_num(const struct sunxi_pinctrl_desc *desc, u8 bank) { if (!desc->irq_bank_map) |