1 files changed, 23 insertions, 18 deletions

diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 073c54e42223..c3554e37e09f 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -1241,7 +1241,8 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			temp = readl(ports[wIndex]->addr);
 			/* Disable port */
 			if (link_state == USB_SS_PORT_LS_SS_DISABLED) {
-				xhci_dbg(xhci, "Disable port %d\n", wIndex);
+				xhci_dbg(xhci, "Disable port %d-%d\n",
+					 hcd->self.busnum, wIndex + 1);
 				temp = xhci_port_state_to_neutral(temp);
 				/*
 				 * Clear all change bits, so that we get a new
@@ -1257,7 +1258,8 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 
 			/* Put link in RxDetect (enable port) */
 			if (link_state == USB_SS_PORT_LS_RX_DETECT) {
-				xhci_dbg(xhci, "Enable port %d\n", wIndex);
+				xhci_dbg(xhci, "Enable port %d-%d\n",
+					 hcd->self.busnum, wIndex + 1);
 				xhci_set_link_state(xhci, ports[wIndex],
 							link_state);
 				temp = readl(ports[wIndex]->addr);
@@ -1289,8 +1291,8 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 					goto error;
 				}
 
-				xhci_dbg(xhci, "Enable compliance mode transition for port %d\n",
-						wIndex);
+				xhci_dbg(xhci, "Enable compliance mode transition for port %d-%d\n",
+					 hcd->self.busnum, wIndex + 1);
 				xhci_set_link_state(xhci, ports[wIndex],
 						link_state);
 
@@ -1304,8 +1306,9 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			}
 			/* Can't set port link state above '3' (U3) */
 			if (link_state > USB_SS_PORT_LS_U3) {
-				xhci_warn(xhci, "Cannot set port %d link state %d\n",
-					 wIndex, link_state);
+				xhci_warn(xhci, "Cannot set port %d-%d link state %d\n",
+					  hcd->self.busnum, wIndex + 1,
+					  link_state);
 				goto error;
 			}
 
@@ -1340,8 +1343,8 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 				spin_unlock_irqrestore(&xhci->lock, flags);
 				if (!wait_for_completion_timeout(&bus_state->u3exit_done[wIndex],
 								 msecs_to_jiffies(100)))
-					xhci_dbg(xhci, "missing U0 port change event for port %d\n",
-						 wIndex);
+					xhci_dbg(xhci, "missing U0 port change event for port %d-%d\n",
+						 hcd->self.busnum, wIndex + 1);
 				spin_lock_irqsave(&xhci->lock, flags);
 				temp = readl(ports[wIndex]->addr);
 				break;
@@ -1386,15 +1389,15 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			writel(temp, ports[wIndex]->addr);
 
 			temp = readl(ports[wIndex]->addr);
-			xhci_dbg(xhci, "set port reset, actual port %d status  = 0x%x\n", wIndex, temp);
+			xhci_dbg(xhci, "set port reset, actual port %d-%d status  = 0x%x\n",
+				 hcd->self.busnum, wIndex + 1, temp);
 			break;
 		case USB_PORT_FEAT_REMOTE_WAKE_MASK:
 			xhci_set_remote_wake_mask(xhci, ports[wIndex],
 						  wake_mask);
 			temp = readl(ports[wIndex]->addr);
-			xhci_dbg(xhci, "set port remote wake mask, "
-					"actual port %d status  = 0x%x\n",
-					wIndex, temp);
+			xhci_dbg(xhci, "set port remote wake mask, actual port %d-%d status  = 0x%x\n",
+				 hcd->self.busnum, wIndex + 1, temp);
 			break;
 		case USB_PORT_FEAT_BH_PORT_RESET:
 			temp |= PORT_WR;
@@ -1635,8 +1638,8 @@ retry:
 			spin_unlock_irqrestore(&xhci->lock, flags);
 			msleep(XHCI_PORT_POLLING_LFPS_TIME);
 			spin_lock_irqsave(&xhci->lock, flags);
-			xhci_dbg(xhci, "port %d polling in bus suspend, waiting\n",
-				 port_index);
+			xhci_dbg(xhci, "port %d-%d polling in bus suspend, waiting\n",
+				 hcd->self.busnum, port_index + 1);
 			goto retry;
 		}
 		/* bail out if port detected a over-current condition */
@@ -1654,7 +1657,8 @@ retry:
 				xhci_dbg(xhci, "Bus suspend bailout, port connect change\n");
 				return -EBUSY;
 			}
-			xhci_dbg(xhci, "port %d not suspended\n", port_index);
+			xhci_dbg(xhci, "port %d-%d not suspended\n",
+				 hcd->self.busnum, port_index + 1);
 			t2 &= ~PORT_PLS_MASK;
 			t2 |= PORT_LINK_STROBE | XDEV_U3;
 			set_bit(port_index, &bus_state->bus_suspended);
@@ -1784,7 +1788,8 @@ int xhci_bus_resume(struct usb_hcd *hcd)
 		if ((xhci->quirks & XHCI_MISSING_CAS) &&
 		    (hcd->speed >= HCD_USB3) &&
 		    xhci_port_missing_cas_quirk(ports[port_index])) {
-			xhci_dbg(xhci, "reset stuck port %d\n", port_index);
+			xhci_dbg(xhci, "reset stuck port %d-%d\n",
+				 hcd->self.busnum, port_index + 1);
 			clear_bit(port_index, &bus_state->bus_suspended);
 			continue;
 		}
@@ -1831,8 +1836,8 @@ int xhci_bus_resume(struct usb_hcd *hcd)
 		sret = xhci_handshake(ports[port_index]->addr, PORT_PLC,
 				      PORT_PLC, 10 * 1000);
 		if (sret) {
-			xhci_warn(xhci, "port %d resume PLC timeout\n",
-				  port_index);
+			xhci_warn(xhci, "port %d-%d resume PLC timeout\n",
+				  hcd->self.busnum, port_index + 1);
 			continue;
 		}
 		xhci_test_and_clear_bit(xhci, ports[port_index], PORT_PLC);