| Age | Commit message (Collapse) | Author |
|---|
|
Merge arm64/for-next/sysreg in order to avoid upstream conflicts
due to the never ending sysreg repainting...
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Currently the kernel refers to the versions of the PMU and SPE features by
the version of the architecture where those features were updated but the
ARM refers to them using the FEAT_ names for the features. To improve
consistency and help with updating for newer features and since v9 will
make our current naming scheme a bit more confusing update the macros
identfying features to use the FEAT_ based scheme.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220910163354.860255-4-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Normally we include the full register name in the defines for fields within
registers but this has not been followed for ID registers. In preparation
for automatic generation of defines add the _EL1s into the defines for
ID_AA64DFR0_EL1 to follow the convention. No functional changes.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220910163354.860255-3-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The naming scheme the architecture uses for the fields in ID_AA64DFR0_EL1
does not align well with kernel conventions, using as it does a lot of
MixedCase in various arrangements. In preparation for automatically
generating the defines for this register rename the defines used to match
what is in the architecture.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220910163354.860255-2-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
One of the oddities of the architecture is that the AArch64 views of the
AArch32 ID registers are UNKNOWN if AArch32 isn't implemented at any EL.
Nonetheless, KVM exposes these registers to userspace for the sake of
save/restore. It is possible that the UNKNOWN value could differ between
systems, leading to a rejected write from userspace.
Avoid the issue altogether by handling the AArch32 ID registers as
RAZ/WI when on an AArch64-only system.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220913094441.3957645-7-oliver.upton@linux.dev
|
|
We're about to ignore writes to AArch32 ID registers on AArch64-only
systems. Add a bit to indicate a register is handled as write ignore
when accessed from userspace.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220913094441.3957645-6-oliver.upton@linux.dev
|
|
There is no longer a need for caller-specified RAZ visibility. Hoist the
call to sysreg_visible_as_raz() into read_id_reg() and drop the
parameter.
No functional change intended.
Suggested-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220913094441.3957645-4-oliver.upton@linux.dev
|
|
The internal accessors are only ever called once. Dump out their
contents in the caller.
No functional change intended.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220913094441.3957645-3-oliver.upton@linux.dev
|
|
The generic id reg accessors already handle RAZ registers by way of the
visibility hook. Add a visibility hook that returns REG_RAZ
unconditionally and throw out the RAZ specific accessors.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220913094441.3957645-2-oliver.upton@linux.dev
|
|
In preparation for converting the ID_AA64MMFR1_EL1 system register
defines to automatic generation, rename them to follow the conventions
used by other automatically generated registers:
* Add _EL1 in the register name.
* Rename fields to match the names in the ARM ARM:
* LOR -> LO
* HPD -> HPDS
* VHE -> VH
* HADBS -> HAFDBS
* SPECSEI -> SpecSEI
* VMIDBITS -> VMIDBits
There should be no functional change as a result of this patch.
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Kristina Martsenko <kristina.martsenko@arm.com>
Link: https://lore.kernel.org/r/20220905225425.1871461-11-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Our standard is to include the _EL1 in the constant names for registers but
we did not do that for ID_AA64PFR1_EL1, update to do so in preparation for
conversion to automatic generation. No functional change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Kristina Martsenko <kristina.martsenko@arm.com>
Link: https://lore.kernel.org/r/20220905225425.1871461-8-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Normally we include the full register name in the defines for fields within
registers but this has not been followed for ID registers. In preparation
for automatic generation of defines add the _EL1s into the defines for
ID_AA64PFR0_EL1 to follow the convention. No functional changes.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Kristina Martsenko <kristina.martsenko@arm.com>
Link: https://lore.kernel.org/r/20220905225425.1871461-7-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.0, take #1
- Fix unexpected sign extension of KVM_ARM_DEVICE_ID_MASK
- Tidy-up handling of AArch32 on asymmetric systems
|
|
KVM does not support AArch32 on asymmetric systems. To that end, enforce
AArch64-only behavior on PMCR_EL1.LC when on an asymmetric system.
Fixes: 2122a833316f ("arm64: Allow mismatched 32-bit EL0 support")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220816192554.1455559-2-oliver.upton@linux.dev
|
|
Pull kvm updates from Paolo Bonzini:
"Quite a large pull request due to a selftest API overhaul and some
patches that had come in too late for 5.19.
ARM:
- Unwinder implementations for both nVHE modes (classic and
protected), complete with an overflow stack
- Rework of the sysreg access from userspace, with a complete rewrite
of the vgic-v3 view to allign with the rest of the infrastructure
- Disagregation of the vcpu flags in separate sets to better track
their use model.
- A fix for the GICv2-on-v3 selftest
- A small set of cosmetic fixes
RISC-V:
- Track ISA extensions used by Guest using bitmap
- Added system instruction emulation framework
- Added CSR emulation framework
- Added gfp_custom flag in struct kvm_mmu_memory_cache
- Added G-stage ioremap() and iounmap() functions
- Added support for Svpbmt inside Guest
s390:
- add an interface to provide a hypervisor dump for secure guests
- improve selftests to use TAP interface
- enable interpretive execution of zPCI instructions (for PCI
passthrough)
- First part of deferred teardown
- CPU Topology
- PV attestation
- Minor fixes
x86:
- Permit guests to ignore single-bit ECC errors
- Intel IPI virtualization
- Allow getting/setting pending triple fault with
KVM_GET/SET_VCPU_EVENTS
- PEBS virtualization
- Simplify PMU emulation by just using PERF_TYPE_RAW events
- More accurate event reinjection on SVM (avoid retrying
instructions)
- Allow getting/setting the state of the speaker port data bit
- Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls
are inconsistent
- "Notify" VM exit (detect microarchitectural hangs) for Intel
- Use try_cmpxchg64 instead of cmpxchg64
- Ignore benign host accesses to PMU MSRs when PMU is disabled
- Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior
- Allow NX huge page mitigation to be disabled on a per-vm basis
- Port eager page splitting to shadow MMU as well
- Enable CMCI capability by default and handle injected UCNA errors
- Expose pid of vcpu threads in debugfs
- x2AVIC support for AMD
- cleanup PIO emulation
- Fixes for LLDT/LTR emulation
- Don't require refcounted "struct page" to create huge SPTEs
- Miscellaneous cleanups:
- MCE MSR emulation
- Use separate namespaces for guest PTEs and shadow PTEs bitmasks
- PIO emulation
- Reorganize rmap API, mostly around rmap destruction
- Do not workaround very old KVM bugs for L0 that runs with nesting enabled
- new selftests API for CPUID
Generic:
- Fix races in gfn->pfn cache refresh; do not pin pages tracked by
the cache
- new selftests API using struct kvm_vcpu instead of a (vm, id)
tuple"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (606 commits)
selftests: kvm: set rax before vmcall
selftests: KVM: Add exponent check for boolean stats
selftests: KVM: Provide descriptive assertions in kvm_binary_stats_test
selftests: KVM: Check stat name before other fields
KVM: x86/mmu: remove unused variable
RISC-V: KVM: Add support for Svpbmt inside Guest/VM
RISC-V: KVM: Use PAGE_KERNEL_IO in kvm_riscv_gstage_ioremap()
RISC-V: KVM: Add G-stage ioremap() and iounmap() functions
KVM: Add gfp_custom flag in struct kvm_mmu_memory_cache
RISC-V: KVM: Add extensible CSR emulation framework
RISC-V: KVM: Add extensible system instruction emulation framework
RISC-V: KVM: Factor-out instruction emulation into separate sources
RISC-V: KVM: move preempt_disable() call in kvm_arch_vcpu_ioctl_run
RISC-V: KVM: Make kvm_riscv_guest_timer_init a void function
RISC-V: KVM: Fix variable spelling mistake
RISC-V: KVM: Improve ISA extension by using a bitmap
KVM, x86/mmu: Fix the comment around kvm_tdp_mmu_zap_leafs()
KVM: SVM: Dump Virtual Machine Save Area (VMSA) to klog
KVM: x86/mmu: Treat NX as a valid SPTE bit for NPT
KVM: x86: Do not block APIC write for non ICR registers
...
|
|
* kvm-arm64/sysreg-cleanup-5.20:
: .
: Long overdue cleanup of the sysreg userspace access,
: with extra scrubbing on the vgic side of things.
: From the cover letter:
:
: "Schspa Shi recently reported[1] that some of the vgic code interacting
: with userspace was reading uninitialised stack memory, and although
: that read wasn't used any further, it prompted me to revisit this part
: of the code.
:
: Needless to say, this area of the kernel is pretty crufty, and shows a
: bunch of issues in other parts of the KVM/arm64 infrastructure. This
: series tries to remedy a bunch of them:
:
: - Sanitise the way we deal with sysregs from userspace: at the moment,
: each and every .set_user/.get_user callback has to implement its own
: userspace accesses (directly or indirectly). It'd be much better if
: that was centralised so that we can reason about it.
:
: - Enforce that all AArch64 sysregs are 64bit. Always. This was sort of
: implied by the code, but it took some effort to convince myself that
: this was actually the case.
:
: - Move the vgic-v3 sysreg userspace accessors to the userspace
: callbacks instead of hijacking the vcpu trap callback. This allows
: us to reuse the sysreg infrastructure.
:
: - Consolidate userspace accesses for both GICv2, GICv3 and common code
: as much as possible.
:
: - Cleanup a bunch of not-very-useful helpers, tidy up some of the code
: as we touch it.
:
: [1] https://lore.kernel.org/r/m2h740zz1i.fsf@gmail.com"
: .
KVM: arm64: Get rid or outdated comments
KVM: arm64: Descope kvm_arm_sys_reg_{get,set}_reg()
KVM: arm64: Get rid of find_reg_by_id()
KVM: arm64: vgic: Tidy-up calls to vgic_{get,set}_common_attr()
KVM: arm64: vgic: Consolidate userspace access for base address setting
KVM: arm64: vgic-v2: Add helper for legacy dist/cpuif base address setting
KVM: arm64: vgic: Use {get,put}_user() instead of copy_{from.to}_user
KVM: arm64: vgic-v2: Consolidate userspace access for MMIO registers
KVM: arm64: vgic-v3: Consolidate userspace access for MMIO registers
KVM: arm64: vgic-v3: Use u32 to manage the line level from userspace
KVM: arm64: vgic-v3: Convert userspace accessors over to FIELD_GET/FIELD_PREP
KVM: arm64: vgic-v3: Make the userspace accessors use sysreg API
KVM: arm64: vgic-v3: Push user access into vgic_v3_cpu_sysregs_uaccess()
KVM: arm64: vgic-v3: Simplify vgic_v3_has_cpu_sysregs_attr()
KVM: arm64: Get rid of reg_from/to_user()
KVM: arm64: Consolidate sysreg userspace accesses
KVM: arm64: Rely on index_to_param() for size checks on userspace access
KVM: arm64: Introduce generic get_user/set_user helpers for system registers
KVM: arm64: Reorder handling of invariant sysregs from userspace
KVM: arm64: Add get_reg_by_id() as a sys_reg_desc retrieving helper
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Once apon a time, the 32bit KVM/arm port was the reference, while
the arm64 version was the new kid on the block, without a clear
future... This was a long time ago.
"The times, they are a-changing."
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
This helper doesn't have a user anymore, let's get rid of it.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
These helpers are only used by the invariant stuff now, and while
they pretend to support non-64bit registers, this only serves as
a way to scare the casual reviewer...
Replace these helpers with our good friends get/put_user(), and
don't look back.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Until now, the .set_user and .get_user callbacks have to implement
(directly or not) the userspace memory accesses. Although this gives
us maximem flexibility, this is also a maintenance burden, making it
hard to audit, and I'd feel much better if it was all located in
a single place.
So let's do just that, simplifying most of the function signatures
in the process (the callbacks are now only concerned with the
data itself, and not with userspace).
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
index_to_param() already checks that we use 64bit accesses for all
registers accessed from userspace.
However, we have extra checks in other places (such as index_to_params),
which is pretty confusing. Get rid off these redundant checks.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The userspace access to the system registers is done using helpers
that hardcode the table that is looked up. extract some generic
helpers from this, moving the handling of hidden sysregs into
the core code.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
In order to allow some further refactor of the sysreg helpers,
move the handling of invariant sysreg to occur before we handle
all the other ones.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
find_reg_by_id() requires a sys_reg_param as input, which most
users provide as a on-stack variable, but don't make any use of
the result.
Provide a helper that doesn't have this requirement and simplify
the callers (all but one).
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Normally we include the full register name in the defines for fields within
registers but this has not been followed for ID registers. In preparation
for automatic generation of defines add the _EL1s into the defines for
ID_AA64ISAR2_EL1 to follow the convention. No functional changes.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220704170302.2609529-17-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Normally we include the full register name in the defines for fields within
registers but this has not been followed for ID registers. In preparation
for automatic generation of defines add the _EL1s into the defines for
ID_AA64ISAR1_EL1 to follow the convention. No functional changes.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220704170302.2609529-16-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The defines for WFxT refer to the feature as WFXT and use SUPPORTED rather
than IMP. In preparation for automatic generation of defines update these
to be more standard. No functional changes.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220704170302.2609529-12-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The aptly named boolean 'sysregs_loaded_on_cpu' tracks whether
some of the vcpu system registers are resident on the physical
CPU when running in VHE mode.
This is obviously a flag in hidding, so let's convert it to
a state flag, since this is solely a host concern (the hypervisor
itself always knows which state we're in).
Reviewed-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The three debug flags (which deal with the debug registers, SPE and
TRBE) all are input flags to the hypervisor code.
Move them into the input set and convert them to the new accessors.
Reviewed-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Pull kvm updates from Paolo Bonzini:
"S390:
- ultravisor communication device driver
- fix TEID on terminating storage key ops
RISC-V:
- Added Sv57x4 support for G-stage page table
- Added range based local HFENCE functions
- Added remote HFENCE functions based on VCPU requests
- Added ISA extension registers in ONE_REG interface
- Updated KVM RISC-V maintainers entry to cover selftests support
ARM:
- Add support for the ARMv8.6 WFxT extension
- Guard pages for the EL2 stacks
- Trap and emulate AArch32 ID registers to hide unsupported features
- Ability to select and save/restore the set of hypercalls exposed to
the guest
- Support for PSCI-initiated suspend in collaboration with userspace
- GICv3 register-based LPI invalidation support
- Move host PMU event merging into the vcpu data structure
- GICv3 ITS save/restore fixes
- The usual set of small-scale cleanups and fixes
x86:
- New ioctls to get/set TSC frequency for a whole VM
- Allow userspace to opt out of hypercall patching
- Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
AMD SEV improvements:
- Add KVM_EXIT_SHUTDOWN metadata for SEV-ES
- V_TSC_AUX support
Nested virtualization improvements for AMD:
- Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
nested vGIF)
- Allow AVIC to co-exist with a nested guest running
- Fixes for LBR virtualizations when a nested guest is running, and
nested LBR virtualization support
- PAUSE filtering for nested hypervisors
Guest support:
- Decoupling of vcpu_is_preempted from PV spinlocks"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (199 commits)
KVM: x86: Fix the intel_pt PMI handling wrongly considered from guest
KVM: selftests: x86: Sync the new name of the test case to .gitignore
Documentation: kvm: reorder ARM-specific section about KVM_SYSTEM_EVENT_SUSPEND
x86, kvm: use correct GFP flags for preemption disabled
KVM: LAPIC: Drop pending LAPIC timer injection when canceling the timer
x86/kvm: Alloc dummy async #PF token outside of raw spinlock
KVM: x86: avoid calling x86 emulator without a decoded instruction
KVM: SVM: Use kzalloc for sev ioctl interfaces to prevent kernel data leak
x86/fpu: KVM: Set the base guest FPU uABI size to sizeof(struct kvm_xsave)
s390/uv_uapi: depend on CONFIG_S390
KVM: selftests: x86: Fix test failure on arch lbr capable platforms
KVM: LAPIC: Trace LAPIC timer expiration on every vmentry
KVM: s390: selftest: Test suppression indication on key prot exception
KVM: s390: Don't indicate suppression on dirtying, failing memop
selftests: drivers/s390x: Add uvdevice tests
drivers/s390/char: Add Ultravisor io device
MAINTAINERS: Update KVM RISC-V entry to cover selftests support
RISC-V: KVM: Introduce ISA extension register
RISC-V: KVM: Cleanup stale TLB entries when host CPU changes
RISC-V: KVM: Add remote HFENCE functions based on VCPU requests
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- Initial support for the ARMv9 Scalable Matrix Extension (SME).
SME takes the approach used for vectors in SVE and extends this to
provide architectural support for matrix operations. No KVM support
yet, SME is disabled in guests.
- Support for crashkernel reservations above ZONE_DMA via the
'crashkernel=X,high' command line option.
- btrfs search_ioctl() fix for live-lock with sub-page faults.
- arm64 perf updates: support for the Hisilicon "CPA" PMU for
monitoring coherent I/O traffic, support for Arm's CMN-650 and
CMN-700 interconnect PMUs, minor driver fixes, kerneldoc cleanup.
- Kselftest updates for SME, BTI, MTE.
- Automatic generation of the system register macros from a 'sysreg'
file describing the register bitfields.
- Update the type of the function argument holding the ESR_ELx register
value to unsigned long to match the architecture register size
(originally 32-bit but extended since ARMv8.0).
- stacktrace cleanups.
- ftrace cleanups.
- Miscellaneous updates, most notably: arm64-specific huge_ptep_get(),
avoid executable mappings in kexec/hibernate code, drop TLB flushing
from get_clear_flush() (and rename it to get_clear_contig()),
ARCH_NR_GPIO bumped to 2048 for ARCH_APPLE.
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (145 commits)
arm64/sysreg: Generate definitions for FAR_ELx
arm64/sysreg: Generate definitions for DACR32_EL2
arm64/sysreg: Generate definitions for CSSELR_EL1
arm64/sysreg: Generate definitions for CPACR_ELx
arm64/sysreg: Generate definitions for CONTEXTIDR_ELx
arm64/sysreg: Generate definitions for CLIDR_EL1
arm64/sve: Move sve_free() into SVE code section
arm64: Kconfig.platforms: Add comments
arm64: Kconfig: Fix indentation and add comments
arm64: mm: avoid writable executable mappings in kexec/hibernate code
arm64: lds: move special code sections out of kernel exec segment
arm64/hugetlb: Implement arm64 specific huge_ptep_get()
arm64/hugetlb: Use ptep_get() to get the pte value of a huge page
arm64: kdump: Do not allocate crash low memory if not needed
arm64/sve: Generate ZCR definitions
arm64/sme: Generate defintions for SVCR
arm64/sme: Generate SMPRI_EL1 definitions
arm64/sme: Automatically generate SMPRIMAP_EL2 definitions
arm64/sme: Automatically generate SMIDR_EL1 defines
arm64/sme: Automatically generate defines for SMCR
...
|
|
* for-next/esr-elx-64-bit:
: Treat ESR_ELx as a 64-bit register.
KVM: arm64: uapi: Add kvm_debug_exit_arch.hsr_high
KVM: arm64: Treat ESR_EL2 as a 64-bit register
arm64: Treat ESR_ELx as a 64-bit register
arm64: compat: Do not treat syscall number as ESR_ELx for a bad syscall
arm64: Make ESR_ELx_xVC_IMM_MASK compatible with assembly
|
|
The defines for SVCR call it SVCR_EL0 however the architecture calls the
register SVCR with no _EL0 suffix. In preparation for generating the sysreg
definitions rename to match the architecture, no functional change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220510161208.631259-6-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
* kvm-arm64/misc-5.19:
: .
: Misc fixes and general improvements for KVMM/arm64:
:
: - Better handle out of sequence sysregs in the global tables
:
: - Remove a couple of unnecessary loads from constant pool
:
: - Drop unnecessary pKVM checks
:
: - Add all known M1 implementations to the SEIS workaround
:
: - Cleanup kerneldoc warnings
: .
KVM: arm64: vgic-v3: List M1 Pro/Max as requiring the SEIS workaround
KVM: arm64: pkvm: Don't mask already zeroed FEAT_SVE
KVM: arm64: pkvm: Drop unnecessary FP/SIMD trap handler
KVM: arm64: nvhe: Eliminate kernel-doc warnings
KVM: arm64: Avoid unnecessary absolute addressing via literals
KVM: arm64: Print emulated register table name when it is unsorted
KVM: arm64: Don't BUG_ON() if emulated register table is unsorted
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
When adding support for the slightly wonky Apple M1, we had to
populate ID_AA64PFR0_EL1.GIC==1 to present something to the guest,
as the HW itself doesn't advertise the feature.
However, we gated this on the in-kernel irqchip being created.
This causes some trouble for QEMU, which snapshots the state of
the registers before creating a virtual GIC, and then tries to
restore these registers once the GIC has been created. Obviously,
between the two stages, ID_AA64PFR0_EL1.GIC has changed value,
and the write fails.
The fix is to actually emulate the HW, and always populate the
field if the HW is capable of it.
Fixes: 562e530fd770 ("KVM: arm64: Force ID_AA64PFR0_EL1.GIC=1 when exposing a virtual GICv3")
Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Oliver Upton <oupton@google.com>
Link: https://lore.kernel.org/r/20220503211424.3375263-1-maz@kernel.org
|
|
When a sysreg table entry is out-of-order, KVM attempts to print the
address of the table:
[ 0.143911] kvm [1]: sys_reg table (____ptrval____) out of order (1)
Printing the name of the table instead of a pointer is more helpful in this
case. The message has also been slightly tweaked to be point out the
offending entry (and to match the missing reset error message):
[ 0.143891] kvm [1]: sys_reg table sys_reg_descs+0x50/0x7490 entry 1 out of order
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220428103405.70884-3-alexandru.elisei@arm.com
|
|
To emulate a register access, KVM uses a table of registers sorted by
register encoding to speed up queries using binary search.
When Linux boots, KVM checks that the table is sorted and uses a BUG_ON()
statement to let the user know if it's not. The unfortunate side effect is
that an unsorted sysreg table brings down the whole kernel, not just KVM,
even though the rest of the kernel can function just fine without KVM. To
make matters worse, on machines which lack a serial console, the user is
left pondering why the machine is taking so long to boot.
Improve this situation by returning an error from kvm_arch_init() if the
sysreg tables are not in the correct order. The machine is still very much
usable for the user, with the exception of virtualization, who can now
easily determine what went wrong.
A minor typo has also been corrected in the check_sysreg_table() function.
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220428103405.70884-2-alexandru.elisei@arm.com
|
|
* kvm-arm64/aarch32-idreg-trap:
: .
: Add trapping/sanitising infrastructure for AArch32 systen registers,
: allowing more control over what we actually expose (such as the PMU).
:
: Patches courtesy of Oliver and Alexandru.
: .
KVM: arm64: Fix new instances of 32bit ESRs
KVM: arm64: Hide AArch32 PMU registers when not available
KVM: arm64: Start trapping ID registers for 32 bit guests
KVM: arm64: Plumb cp10 ID traps through the AArch64 sysreg handler
KVM: arm64: Wire up CP15 feature registers to their AArch64 equivalents
KVM: arm64: Don't write to Rt unless sys_reg emulation succeeds
KVM: arm64: Return a bool from emulate_cp()
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/wfxt:
: .
: Add support for the WFET/WFIT instructions that provide the same
: service as WFE/WFI, only with a timeout.
: .
KVM: arm64: Expose the WFXT feature to guests
KVM: arm64: Offer early resume for non-blocking WFxT instructions
KVM: arm64: Handle blocking WFIT instruction
KVM: arm64: Introduce kvm_counter_compute_delta() helper
KVM: arm64: Simplify kvm_cpu_has_pending_timer()
arm64: Use WFxT for __delay() when possible
arm64: Add wfet()/wfit() helpers
arm64: Add HWCAP advertising FEAT_WFXT
arm64: Add RV and RN fields for ESR_ELx_WFx_ISS
arm64: Expand ESR_ELx_WFx_ISS_TI to match its ARMv8.7 definition
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Fix the new instances of ESR being described as a u32, now that
we consistently are using a u64 for this register.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
commit 11663111cd49 ("KVM: arm64: Hide PMU registers from userspace when
not available") hid the AArch64 PMU registers from userspace and guest
when the PMU VCPU feature was not set. Do the same when the PMU
registers are accessed by an AArch32 guest. While we're at it, rename
the previously unused AA32_ZEROHIGH to AA32_DIRECT to match the behavior
of get_access_mask().
Now that KVM emulates ID_DFR0 and hides the PMU from the guest when the
feature is not set, it is safe to inject to inject an undefined exception
when the PMU is not present, as that corresponds to the architected
behaviour.
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
[Oliver - Add AA32_DIRECT to match the zero value of the enum]
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220503060205.2823727-7-oupton@google.com
|
|
In order to enable HCR_EL2.TID3 for AArch32 guests KVM needs to handle
traps where ESR_EL2.EC=0x8, which corresponds to an attempted VMRS
access from an ID group register. Specifically, the MVFR{0-2} registers
are accessed this way from AArch32. Conveniently, these registers are
architecturally mapped to MVFR{0-2}_EL1 in AArch64. Furthermore, KVM
already handles reads to these aliases in AArch64.
Plumb VMRS read traps through to the general AArch64 system register
handler.
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220503060205.2823727-5-oupton@google.com
|
|
KVM currently does not trap ID register accesses from an AArch32 EL1.
This is painful for a couple of reasons. Certain unimplemented features
are visible to AArch32 EL1, as we limit PMU to version 3 and the debug
architecture to v8.0. Additionally, we attempt to paper over
heterogeneous systems by using register values that are safe
system-wide. All this hard work is completely sidestepped because KVM
does not set TID3 for AArch32 guests.
Fix up handling of CP15 feature registers by simply rerouting to their
AArch64 aliases. Punt setting HCR_EL2.TID3 to a later change, as we need
to fix up the oddball CP10 feature registers still.
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220503060205.2823727-4-oupton@google.com
|
|
emulate_sys_reg() returns 1 unconditionally, even though a a system
register access can fail. Furthermore, kvm_handle_sys_reg() writes to Rt
for every register read, regardless of if it actually succeeded.
Though this pattern is safe (as params.regval is initialized with the
current value of Rt) it is a bit ugly. Indicate failure if the register
access could not be emulated and only write to Rt on success.
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220503060205.2823727-3-oupton@google.com
|
|
KVM indicates success/failure in several ways, but generally an integer
is used when conditionally bouncing to userspace is involved. That is
not the case from emulate_cp(); just use a bool instead.
No functional change intended.
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220503060205.2823727-2-oupton@google.com
|
|
ESR_EL2 was defined as a 32-bit register in the initial release of the
ARM Architecture Manual for Armv8-A, and was later extended to 64 bits,
with bits [63:32] RES0. ARMv8.7 introduced FEAT_LS64, which makes use of
bits [36:32].
KVM treats ESR_EL1 as a 64-bit register when saving and restoring the
guest context, but ESR_EL2 is handled as a 32-bit register. Start
treating ESR_EL2 as a 64-bit register to allow KVM to make use of the
most significant 32 bits in the future.
The type chosen to represent ESR_EL2 is u64, as that is consistent with the
notation KVM overwhelmingly uses today (u32), and how the rest of the
registers are declared.
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220425114444.368693-5-alexandru.elisei@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
For the time being we do not support use of SME by KVM guests, support for
this will be enabled in future. In order to prevent any side effects or
side channels via the new system registers, including the EL0 read/write
register TPIDR2, explicitly undefine all the system registers added by
SME and mask out the SME bitfield in SYS_ID_AA64PFR1.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220419112247.711548-25-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Plumb in the capability, and expose WFxT to guests when available.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220419182755.601427-8-maz@kernel.org
|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- Proper emulation of the OSLock feature of the debug architecture
- Scalibility improvements for the MMU lock when dirty logging is on
- New VMID allocator, which will eventually help with SVA in VMs
- Better support for PMUs in heterogenous systems
- PSCI 1.1 support, enabling support for SYSTEM_RESET2
- Implement CONFIG_DEBUG_LIST at EL2
- Make CONFIG_ARM64_ERRATUM_2077057 default y
- Reduce the overhead of VM exit when no interrupt is pending
- Remove traces of 32bit ARM host support from the documentation
- Updated vgic selftests
- Various cleanups, doc updates and spelling fixes
RISC-V:
- Prevent KVM_COMPAT from being selected
- Optimize __kvm_riscv_switch_to() implementation
- RISC-V SBI v0.3 support
s390:
- memop selftest
- fix SCK locking
- adapter interruptions virtualization for secure guests
- add Claudio Imbrenda as maintainer
- first step to do proper storage key checking
x86:
- Continue switching kvm_x86_ops to static_call(); introduce
static_call_cond() and __static_call_ret0 when applicable.
- Cleanup unused arguments in several functions
- Synthesize AMD 0x80000021 leaf
- Fixes and optimization for Hyper-V sparse-bank hypercalls
- Implement Hyper-V's enlightened MSR bitmap for nested SVM
- Remove MMU auditing
- Eager splitting of page tables (new aka "TDP" MMU only) when dirty
page tracking is enabled
- Cleanup the implementation of the guest PGD cache
- Preparation for the implementation of Intel IPI virtualization
- Fix some segment descriptor checks in the emulator
- Allow AMD AVIC support on systems with physical APIC ID above 255
- Better API to disable virtualization quirks
- Fixes and optimizations for the zapping of page tables:
- Zap roots in two passes, avoiding RCU read-side critical
sections that last too long for very large guests backed by 4
KiB SPTEs.
- Zap invalid and defunct roots asynchronously via
concurrency-managed work queue.
- Allowing yielding when zapping TDP MMU roots in response to the
root's last reference being put.
- Batch more TLB flushes with an RCU trick. Whoever frees the
paging structure now holds RCU as a proxy for all vCPUs running
in the guest, i.e. to prolongs the grace period on their behalf.
It then kicks the the vCPUs out of guest mode before doing
rcu_read_unlock().
Generic:
- Introduce __vcalloc and use it for very large allocations that need
memcg accounting"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (246 commits)
KVM: use kvcalloc for array allocations
KVM: x86: Introduce KVM_CAP_DISABLE_QUIRKS2
kvm: x86: Require const tsc for RT
KVM: x86: synthesize CPUID leaf 0x80000021h if useful
KVM: x86: add support for CPUID leaf 0x80000021
KVM: x86: do not use KVM_X86_OP_OPTIONAL_RET0 for get_mt_mask
Revert "KVM: x86/mmu: Zap only TDP MMU leafs in kvm_zap_gfn_range()"
kvm: x86/mmu: Flush TLB before zap_gfn_range releases RCU
KVM: arm64: fix typos in comments
KVM: arm64: Generalise VM features into a set of flags
KVM: s390: selftests: Add error memop tests
KVM: s390: selftests: Add more copy memop tests
KVM: s390: selftests: Add named stages for memop test
KVM: s390: selftests: Add macro as abstraction for MEM_OP
KVM: s390: selftests: Split memop tests
KVM: s390x: fix SCK locking
RISC-V: KVM: Implement SBI HSM suspend call
RISC-V: KVM: Add common kvm_riscv_vcpu_wfi() function
RISC-V: Add SBI HSM suspend related defines
RISC-V: KVM: Implement SBI v0.3 SRST extension
...
|
|
QARMA3 is relaxed version of the QARMA5 algorithm which expected to
reduce the latency of calculation while still delivering a suitable
level of security.
Support for QARMA3 can be discovered via ID_AA64ISAR2_EL1
APA3, bits [15:12] Indicates whether the QARMA3 algorithm is
implemented in the PE for address
authentication in AArch64 state.
GPA3, bits [11:8] Indicates whether the QARMA3 algorithm is
implemented in the PE for generic code
authentication in AArch64 state.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220224124952.119612-4-vladimir.murzin@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
