| Age | Commit message (Collapse) | Author |
|---|
|
After commit 5a8132b9f606 ("drm/amd/display: remove dead dc vbios code"),
no one use struct i2c_id_config_access, so remove it.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Kernel test robot throws below warning ->
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn31/dcn31_hpo_dp_stream_encoder.c:
In function 'dcn31_hpo_dp_stream_enc_update_dp_info_packets':
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn31/dcn31_hpo_dp_stream_encoder.c:439:14:
warning: variable 'sdp_stream_enable' set but not used
[-Wunused-but-set-variable]
439 | bool sdp_stream_enable = false;
Removed unused variable 'sdp_stream_enable'.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dong Chenchen <dongchenchen2@huawei.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Rectify multiple kernel-doc warnings in dcn32_fpu.c.
E.g.:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:247: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Finds dummy_latency_index when MCLK switching using firmware based
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:484: warning: Function parameter or member 'phantom_stream' not described in 'dcn32_set_phantom_stream_timing'
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:601: warning: Function parameter or member 'dc' not described in 'dcn32_assign_subvp_pipe'
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:601: warning: Function parameter or member 'context' not described in 'dcn32_assign_subvp_pipe'
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:601: warning: Function parameter or member 'index' not described in 'dcn32_assign_subvp_pipe'
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:2140: warning: Function parameter or member 'dc' not described in 'dcn32_update_bw_bounding_box_fpu'
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:2140: warning: Function parameter or member 'bw_params' not described in 'dcn32_update_bw_bounding_box_fpu'
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:2140: warning: expecting prototype for dcn32_update_bw_bounding_box(). Prototype was for dcn32_update_bw_bounding_box_fpu() instead
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: George Shen <george.shen@amd.com>
Cc: Alvin Lee <alvin.lee2@amd.com>
Cc: Nevenko Stupar <Nevenko.Stupar@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
clean up one inconsistent indenting
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2321
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
clean up one inconsistent indenting
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2238
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This commit adds some minor code style changes just to reduce the merge
conflicts we have when we upstream some of the VBA code.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update DSC checks in the DCN32 VBA.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
During transition from ODM combine to ODM bypass, if DSC is enabled need
to disconnect the DSC mux for pipes no longer in use.
[How]
During ODM update, detect pipes with DSC that are no longer being used
for new state and call new DSC interface to disconnect.
Add new DSC interface to disconnect from pipe
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
why and how:
needed to fix bad assumption for enable mcm_luts
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Martin Leung <Martin.Leung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This version brings along the following:
- ILR improvements
- PSR fixes
- DCN315 fixes
- DCN32 fixes
- ODM fixes
- DSC fixes
- SubVP fixes
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If the current configuration supports 2 to 1 ODM policy, let's also
enable the windowed MPO feature.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x
|
|
For some reason, we missed the PState check for DCN32 which may cause
issues for clock transition. This commit add that required hook.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There is a missing register mask in dcn32 causing the hardware
programming is not executed when programming SQ_num test pattern for
DP2.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Certain features require the additional DP SDP configuration registers
DP_SEC_CNTL1 and DP_SEC_CNTL5 in order to function correctly.
The DCN32 DIO stream encoder reglist is currently missing these two
registers.
[How]
Add the missing registers to the DCN32 DIO stream encoder reglist.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: George Shen <George.Shen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
In DIO stream encoder, definition of DP_DSC_MODE is changed (only
enable/disable) In OPTC, OTG_SET_V_TOTAL_MIN_MASK_EN is removed (same as
DCN3.1)
[How]
In DIO stream encoder, update enc32_dp_set_dsc_config(). In OPTC, use
DCN3.1 version for function interfaces .set_vrr_m_const and .set_drr
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY&HOW?]
When merging ODM pipes that are using MPO, we must copy the stream_res
from the new top pipe to the bottom pipe so that the overlayed plane is
not pointing to the wrong stream assets.
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add HDMI ACP bit field definition for DCN32.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
At some point, we decided to blank HUBP during pixel data blank, and to
handle that, we added some OPTC lock checks. Later, we realized that
this change caused multiple regression, and we removed it. Nevertheless,
we still have some leftovers that might affect some ASIC behavior, and
this commit drops those changes to keep the code consistent.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
SubVP has some issues related to how we allocate and enable it. This
commit fixes this behavior by adding the proper check and configuration
to the SubVP code path.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
DCN provides a hook to check if we can have a new pipe allocation based
on some DC constraints. If the current configuration supports the new
pipe request, DC updates its context; otherwise, it will keep the same
configuration. This behavior is similar across multiple ASICs, and for
this reason, we reused DCN20 on DCN321. However, this DCN32x has some
peculiarities which require its function to avoid weird pipe split
issues. This commit update this issue by using
dcn32_acquire_idle_pipe_for_head_pipe_in_layer instead of
dcn20_acquire_idle_pipe_for_layer.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Under DCN32/321 we identified some code paths that DC never executes.
This commit removes those unused codes to avoid distractions when
debugging issues.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
why:
when dynamic odm was turned on, there is also logic to halve the pixelclk
this still turned on when we avoided odm in the case of odd h_total timings
how:
block the pixel clk mechanism also in the case of odd h_total timings
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Martin Leung <Martin.Leung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[how]
Large deltas for periodic interrupts could result in the interrupt not
being programmed properly and thus not firing.
[why]
Add proper wrap-around support for calculating VUPDATE and VLINE
positions.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
According to specs, it expects us to write all 4 bytes even if
current lane count is less than 4.
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY?]
Clocks are updating based on the incoming context's support, however the new
compbuf size is not programmed prior to udpating clocks, which can result in
P-State hangs.
[HOW?]
Increase compbuf size prior to updating clocks.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Disable OTG when PSRSU with z10 even if z10 is disable
[How]
Reverse condition to keep OTG on when Z10 is disable
Reviewed-by: Robin Chen <po-tchen@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Lewis Huang <Lewis.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
DCN315 has to always allow pstate change or SMU will hang. This
workaround achieves this by applying a low pstate change latency
to be used when pstate is calculated to be unsupported. This lower
latency only accounts for memory retraining; a previous change
handles locking in the highest available pstate allowing us to minimize
required latency hiding to only account for memory retraining.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
Now dynamic ODM will now be disabled when MPO is required safe
transitions to avoid underflow, but we are triggering the way of
minimal transition too often. Commit state of dc with no check
will do pipeline setup which may re-initialize the component with no
need such as audio.
[HOW]
Just do the minimal transition when all of pipes are in use, otherwise
return true to skip.
Reviewed-by: Dillon Varone <Dillon.Varone@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Zhikai Zhai <zhikai.zhai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Adding log for LTTPR to facilitate debugging.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Leo Chen <sancchen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Description]
- For SubVP pipe split case we need to use a minimial transition
when opening MPO video since we are transitioning from 4 pipes
to 3 pipes where an OPP for a previous MPCC will change
- Also save and restore mall config when doing fast_validate in case
there was a shallow copy of the dc->current_state
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We split out ILR config from "global" to "per-panel" config settings.
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Ian Chen <ian.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[HOW&WHY]
Fixed check to only avoid PSR entry when panel
is disconnected. PSR exit can be permitted to restore
the HW to it's non-PSR state.
Reviewed-by: Jayendran Ramani <Jayendran.Ramani@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Iswara Nagulendran <Iswara.Nagulendran@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why && How]
Remove the unnecessary AUX trace and use one trace for AUX failure.
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
Analyzer shows incorrect V freq in MSA for some large timing.
[how]
Cast an 32 bit integer to uint64_t before multiplication to avoid
integer overflow for a very large timing.
Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Description]
When enabling phantom pipe on a pipe that was previously
using immediate flip, we have to disable GSL or this will
prevent the update from taking place right away on the phantom
pipe when we enable it in FW
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
limit the vm prefetch check for now, until the feature is fully
verified.
Reviewed-by: Hansen Dsouza <Hansen.Dsouza@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit 796d6a37ff5ffaf9f2dc0f3f4bf9f4a1034c00de.
4K144 resolution isn't available on DCN31.
Reviewed-by: Sherry Wang <Yao.Wang1@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Description]
- SubVP rotation support is not explicitly implemented,
so block SubVP in rotation cases to avoid unexpected
behaviors
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
DML does not take the fact that dcn315 does not have enough detile
buffer to max all pipes. This change adds a workaround to apply
the same logic DC does when calculating detile buffer size in DML.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY?]
In some cases, DCFCLK hardmin requests are not acknowledged by SMU as
the requested clock does not have a compatible ratio with current FCLK,
and it cannot be changed as FCLK P-state is not allowed.
[HOW?]
Allow FCLK p-state change prior to changing DCFCLK hardmin.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why?]
Currently SubVP programming is only done in commit_planes_for_stream, as
it was expected only this call would add/remove planes from a
display.
[How?]
Add SubVP programming to dc_commit_state_no_check.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
enc314_stream_encoder_dp_blank is only used in dcn314_dio_stream_encoder.c now,
change it to static.
Fixes: c55bf690fe79 ("drm/amd/display: Add explicit FIFO disable for DP blank")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Description]
We only want to commit the SubVP config to DMCUB
after the main and phantom pipe programming has
completed. Commiting the state early can cause
issues such as P-State being allowed by the HW
early which causes the SubVP state machine to
go into a bad state
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Removal of DC_FP_* wrappers from dml (9696679bf7ac) provokes a mutex
lock [2] on the amdgpu driver. Re-arrange the dcn10 code to avoid
locking the mutex by placing the DC_FP_* wrappers around the proper
functions.
This fixes the following WARN/stacktrace:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:283
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 227, name: systemd-udevd
preempt_count: 1, expected: 0
CPU: 4 PID: 227 Comm: systemd-udevd Not tainted 6.0.0-rc6-qtec-standard #2
Hardware name: Qtechnology A/S QT5222/QT5221, BIOS v1.0.1 06/07/2021
Call Trace:
<TASK>
dump_stack_lvl+0x33/0x42
__might_resched.cold.172+0xa5/0xb3
mutex_lock+0x1a/0x40
amdgpu_dpm_get_clock_by_type_with_voltage+0x38/0x70 [amdgpu]
dm_pp_get_clock_levels_by_type_with_voltage+0x64/0xa0 [amdgpu]
dcn_bw_update_from_pplib+0x70/0x340 [amdgpu]
dcn10_create_resource_pool+0x8c8/0xd20 [amdgpu]
? __kmalloc+0x1c7/0x4a0
dc_create_resource_pool+0xe7/0x190 [amdgpu]
dc_create+0x212/0x5d0 [amdgpu]
amdgpu_dm_init+0x246/0x370 [amdgpu]
? schedule_hrtimeout_range_clock+0x93/0x120
? phm_wait_for_register_unequal.part.1+0x4a/0x80 [amdgpu]
dm_hw_init+0xe/0x20 [amdgpu]
amdgpu_device_init.cold.56+0x1324/0x1653 [amdgpu]
? pci_bus_read_config_word+0x43/0x80
amdgpu_driver_load_kms+0x15/0x120 [amdgpu]
amdgpu_pci_probe+0x116/0x320 [amdgpu]
pci_device_probe+0x97/0x110
really_probe+0xdd/0x340
__driver_probe_device+0x80/0x170
driver_probe_device+0x1f/0x90
__driver_attach+0xdc/0x180
? __device_attach_driver+0x100/0x100
? __device_attach_driver+0x100/0x100
bus_for_each_dev+0x74/0xc0
bus_add_driver+0x19e/0x210
? kset_find_obj+0x30/0xa0
? 0xffffffffa0a5b000
driver_register+0x6b/0xc0
? 0xffffffffa0a5b000
do_one_initcall+0x4a/0x1f0
? __vunmap+0x28e/0x2f0
? __cond_resched+0x15/0x30
? kmem_cache_alloc_trace+0x3d/0x440
do_init_module+0x4a/0x1e0
load_module+0x1cba/0x1e10
? __do_sys_finit_module+0xb7/0x120
__do_sys_finit_module+0xb7/0x120
do_syscall_64+0x3c/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7ff2b5f5422d
Code: 5d c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48
89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48>
3d 01 f0 ff ff 73 01 c3 48 8b 0d c3 ab 0e 00 f7 d8 64 89 01 48
RSP: 002b:00007ffc44ab28e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 0000555c566a9240 RCX: 00007ff2b5f5422d
RDX: 0000000000000000 RSI: 00007ff2b60bb353 RDI: 0000000000000019
RBP: 00007ff2b60bb353 R08: 0000000000000000 R09: 0000555c566a9240
R10: 0000000000000019 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000020000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Fixes: 9696679bf7ac ("drm/amd/display: remove DC_FP_* wrapper from dml folder")
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Daniel Gomez <daniel@qtec.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Address the following error:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c: In function ‘dc_stream_remove_writeback’:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c:527:55: error: array subscript [0, 0] is outside array bounds of ‘struct dc_writeback_info[1]’ [-Werror=array-bounds]
527 | stream->writeback_info[j] = stream->writeback_info[i];
| ~~~~~~~~~~~~~~~~~~~~~~^~~
In file included from ./drivers/gpu/drm/amd/amdgpu/../display/dc/dc.h:1269,
from ./drivers/gpu/drm/amd/amdgpu/../display/dc/inc/core_types.h:29,
from ./drivers/gpu/drm/amd/amdgpu/../display/dc/basics/dc_common.h:29,
from drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c:27:
./drivers/gpu/drm/amd/amdgpu/../display/dc/dc_stream.h:241:34: note: while referencing ‘writeback_info’
241 | struct dc_writeback_info writeback_info[MAX_DWB_PIPES];
|
Currently, we aren't checking to see if j remains within
writeback_info[]'s bounds. So, add a check to make sure that we aren't
overflowing the buffer.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch is used to fix following compiling error that occurs in
some old kernels.
error: ‘for’ loop initial declarations are only allowed in C99 mode
for (int i = 0; i < dc->res_pool->res_cap->num_dsc; i++) {
Signed-off-by: Asher Song <Asher.Song@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
Previously, LTTPR mode was decided during detection which makes
link training inflexible as mode can't be dynamically changed.
[HOW]
-Remove lttpr_mode from link struct, and move to link training settings
-Defer choosing LTTPR mode until link training
Other DP changes included:
-Only use fixed vs/pe link training sequence for 8b/10b encoding
-Restrict fixed vs aux timeout workaround to Yellow Carp family
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This version brings along following fixes:
- LTTPR mode can be be dynamically changed
- fixes divide by zero error
- features able to use same interface to update cursor info
- fixes for llvm compilation issues
- Fixes DIO FIFO underflow and other FIFO errors
- Partially valid EDIDs handled properly
- Phatom pipes are skipped when checking pending flip
- Fixed audio on audio on display after unplugging
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why&How]
Incorrect variable was being checked for zero condition.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We only gain a benefit of using the ODM2:1 dynamic policy if it allow us
to decrease DISPCLK to use the VMIN freq. If the display config can
already achieve VMIN DISPCLK freq without ODM2:1, don't apply the
policy.
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
