diff options
Diffstat (limited to 'templates/module/cisco_snmp/README.md')
-rw-r--r-- | templates/module/cisco_snmp/README.md | 64 |
1 files changed, 32 insertions, 32 deletions
diff --git a/templates/module/cisco_snmp/README.md b/templates/module/cisco_snmp/README.md index 0e74c24a500..97d214b07ce 100644 --- a/templates/module/cisco_snmp/README.md +++ b/templates/module/cisco_snmp/README.md @@ -1,9 +1,9 @@ -# Cisco CISCO-MEMORY-POOL-MIB SNMP +# Cisco CISCO-MEMORY-POOL-MIB by SNMP ## Overview -For Zabbix version: 6.2 and higher +For Zabbix version: 6.4 and higher. ## Setup @@ -41,17 +41,17 @@ There are no template links in this template. |Name|Description|Expression|Severity|Dependencies and additional info| |----|-----------|----|----|----| -|{#SNMPVALUE}: High memory utilization |<p>The system is running out of free memory.</p> |`min(/Cisco CISCO-MEMORY-POOL-MIB SNMP/vm.memory.util[vm.memory.util.{#SNMPINDEX}],5m)>{$MEMORY.UTIL.MAX}` |AVERAGE | | +|{#SNMPVALUE}: High memory utilization |<p>The system is running out of free memory.</p> |`min(/Cisco CISCO-MEMORY-POOL-MIB by SNMP/vm.memory.util[vm.memory.util.{#SNMPINDEX}],5m)>{$MEMORY.UTIL.MAX}` |AVERAGE | | ## Feedback -Please report any issues with the template at https://support.zabbix.com +Please report any issues with the template at https://support.zabbix.com. -# Cisco CISCO-PROCESS-MIB SNMP +# Cisco CISCO-PROCESS-MIB by SNMP ## Overview -For Zabbix version: 6.2 and higher +For Zabbix version: 6.4 and higher. ## Setup @@ -87,17 +87,17 @@ There are no template links in this template. |Name|Description|Expression|Severity|Dependencies and additional info| |----|-----------|----|----|----| -|#{#SNMPINDEX}: High CPU utilization |<p>CPU utilization is too high. The system might be slow to respond.</p> |`min(/Cisco CISCO-PROCESS-MIB SNMP/system.cpu.util[cpmCPUTotal5minRev.{#SNMPINDEX}],5m)>{$CPU.UTIL.CRIT}` |WARNING | | +|#{#SNMPINDEX}: High CPU utilization |<p>CPU utilization is too high. The system might be slow to respond.</p> |`min(/Cisco CISCO-PROCESS-MIB by SNMP/system.cpu.util[cpmCPUTotal5minRev.{#SNMPINDEX}],5m)>{$CPU.UTIL.CRIT}` |WARNING | | ## Feedback -Please report any issues with the template at https://support.zabbix.com +Please report any issues with the template at https://support.zabbix.com. -# Cisco CISCO-PROCESS-MIB IOS versions 12.0_3_T-12.2_3.5 SNMP +# Cisco CISCO-PROCESS-MIB IOS versions 12.0_3_T-12.2_3.5 by SNMP ## Overview -For Zabbix version: 6.2 and higher +For Zabbix version: 6.4 and higher. ## Setup @@ -133,17 +133,17 @@ There are no template links in this template. |Name|Description|Expression|Severity|Dependencies and additional info| |----|-----------|----|----|----| -|{#SNMPVALUE}: High CPU utilization |<p>CPU utilization is too high. The system might be slow to respond.</p> |`min(/Cisco CISCO-PROCESS-MIB IOS versions 12.0_3_T-12.2_3.5 SNMP/system.cpu.util[cpmCPUTotal5min.{#SNMPINDEX}],5m)>{$CPU.UTIL.CRIT}` |WARNING | | +|{#SNMPVALUE}: High CPU utilization |<p>CPU utilization is too high. The system might be slow to respond.</p> |`min(/Cisco CISCO-PROCESS-MIB IOS versions 12.0_3_T-12.2_3.5 by SNMP/system.cpu.util[cpmCPUTotal5min.{#SNMPINDEX}],5m)>{$CPU.UTIL.CRIT}` |WARNING | | ## Feedback -Please report any issues with the template at https://support.zabbix.com +Please report any issues with the template at https://support.zabbix.com. -# Cisco OLD-CISCO-CPU-MIB SNMP +# Cisco OLD-CISCO-CPU-MIB by SNMP ## Overview -For Zabbix version: 6.2 and higher +For Zabbix version: 6.4 and higher. ## Setup @@ -176,17 +176,17 @@ There are no template links in this template. |Name|Description|Expression|Severity|Dependencies and additional info| |----|-----------|----|----|----| -|High CPU utilization |<p>CPU utilization is too high. The system might be slow to respond.</p> |`min(/Cisco OLD-CISCO-CPU-MIB SNMP/system.cpu.util[avgBusy5],5m)>{$CPU.UTIL.CRIT}` |WARNING | | +|High CPU utilization |<p>CPU utilization is too high. The system might be slow to respond.</p> |`min(/Cisco OLD-CISCO-CPU-MIB by SNMP/system.cpu.util[avgBusy5],5m)>{$CPU.UTIL.CRIT}` |WARNING | | ## Feedback -Please report any issues with the template at https://support.zabbix.com +Please report any issues with the template at https://support.zabbix.com. -# Cisco Inventory SNMP +# Cisco Inventory by SNMP ## Overview -For Zabbix version: 6.2 and higher +For Zabbix version: 6.4 and higher. ## Setup @@ -220,19 +220,19 @@ There are no template links in this template. |Name|Description|Expression|Severity|Dependencies and additional info| |----|-----------|----|----|----| -|Device has been replaced |<p>Device serial number has changed. Ack to close</p> |`last(/Cisco Inventory SNMP/system.hw.serialnumber,#1)<>last(/Cisco Inventory SNMP/system.hw.serialnumber,#2) and length(last(/Cisco Inventory SNMP/system.hw.serialnumber))>0` |INFO |<p>Manual close: YES</p> | -|Operating system description has changed |<p>Operating system description has changed. Possible reasons that system has been updated or replaced. Ack to close.</p> |`last(/Cisco Inventory SNMP/system.sw.os[sysDescr.0],#1)<>last(/Cisco Inventory SNMP/system.sw.os[sysDescr.0],#2) and length(last(/Cisco Inventory SNMP/system.sw.os[sysDescr.0]))>0` |INFO |<p>Manual close: YES</p> | -|{#ENT_NAME}: Device has been replaced |<p>Device serial number has changed. Ack to close</p> |`last(/Cisco Inventory SNMP/system.hw.serialnumber[entPhysicalSerialNum.{#SNMPINDEX}],#1)<>last(/Cisco Inventory SNMP/system.hw.serialnumber[entPhysicalSerialNum.{#SNMPINDEX}],#2) and length(last(/Cisco Inventory SNMP/system.hw.serialnumber[entPhysicalSerialNum.{#SNMPINDEX}]))>0` |INFO |<p>Manual close: YES</p> | +|Device has been replaced |<p>Device serial number has changed. Ack to close</p> |`last(/Cisco Inventory by SNMP/system.hw.serialnumber,#1)<>last(/Cisco Inventory by SNMP/system.hw.serialnumber,#2) and length(last(/Cisco Inventory by SNMP/system.hw.serialnumber))>0` |INFO |<p>Manual close: YES</p> | +|Operating system description has changed |<p>Operating system description has changed. Possible reasons that system has been updated or replaced. Ack to close.</p> |`last(/Cisco Inventory by SNMP/system.sw.os[sysDescr.0],#1)<>last(/Cisco Inventory by SNMP/system.sw.os[sysDescr.0],#2) and length(last(/Cisco Inventory by SNMP/system.sw.os[sysDescr.0]))>0` |INFO |<p>Manual close: YES</p> | +|{#ENT_NAME}: Device has been replaced |<p>Device serial number has changed. Ack to close</p> |`last(/Cisco Inventory by SNMP/system.hw.serialnumber[entPhysicalSerialNum.{#SNMPINDEX}],#1)<>last(/Cisco Inventory by SNMP/system.hw.serialnumber[entPhysicalSerialNum.{#SNMPINDEX}],#2) and length(last(/Cisco Inventory by SNMP/system.hw.serialnumber[entPhysicalSerialNum.{#SNMPINDEX}]))>0` |INFO |<p>Manual close: YES</p> | ## Feedback -Please report any issues with the template at https://support.zabbix.com +Please report any issues with the template at https://support.zabbix.com. -# Cisco CISCO-ENVMON-MIB SNMP +# Cisco CISCO-ENVMON-MIB by SNMP ## Overview -For Zabbix version: 6.2 and higher +For Zabbix version: 6.4 and higher. ## Setup @@ -288,15 +288,15 @@ There are no template links in this template. |Name|Description|Expression|Severity|Dependencies and additional info| |----|-----------|----|----|----| -|{#SENSOR_INFO}: Fan is in critical state |<p>Please check the fan unit</p> |`count(/Cisco CISCO-ENVMON-MIB SNMP/sensor.fan.status[ciscoEnvMonFanState.{#SNMPINDEX}],#1,"eq","{$FAN_CRIT_STATUS:\"critical\"}")=1 or count(/Cisco CISCO-ENVMON-MIB SNMP/sensor.fan.status[ciscoEnvMonFanState.{#SNMPINDEX}],#1,"eq","{$FAN_CRIT_STATUS:\"shutdown\"}")=1` |AVERAGE | | -|{#SENSOR_INFO}: Fan is in warning state |<p>Please check the fan unit</p> |`count(/Cisco CISCO-ENVMON-MIB SNMP/sensor.fan.status[ciscoEnvMonFanState.{#SNMPINDEX}],#1,"eq","{$FAN_WARN_STATUS:\"warning\"}")=1 or count(/Cisco CISCO-ENVMON-MIB SNMP/sensor.fan.status[ciscoEnvMonFanState.{#SNMPINDEX}],#1,"eq","{$FAN_WARN_STATUS:\"notFunctioning\"}")=1` |WARNING |<p>**Depends on**:</p><p>- {#SENSOR_INFO}: Fan is in critical state</p> | -|{#SENSOR_INFO}: Power supply is in critical state |<p>Please check the power supply unit for errors</p> |`count(/Cisco CISCO-ENVMON-MIB SNMP/sensor.psu.status[ciscoEnvMonSupplyState.{#SNMPINDEX}],#1,"eq","{$PSU_CRIT_STATUS:\"critical\"}")=1 or count(/Cisco CISCO-ENVMON-MIB SNMP/sensor.psu.status[ciscoEnvMonSupplyState.{#SNMPINDEX}],#1,"eq","{$PSU_CRIT_STATUS:\"shutdown\"}")=1` |AVERAGE | | -|{#SENSOR_INFO}: Power supply is in warning state |<p>Please check the power supply unit for errors</p> |`count(/Cisco CISCO-ENVMON-MIB SNMP/sensor.psu.status[ciscoEnvMonSupplyState.{#SNMPINDEX}],#1,"eq","{$PSU_WARN_STATUS:\"warning\"}")=1 or count(/Cisco CISCO-ENVMON-MIB SNMP/sensor.psu.status[ciscoEnvMonSupplyState.{#SNMPINDEX}],#1,"eq","{$PSU_WARN_STATUS:\"notFunctioning\"}")=1` |WARNING |<p>**Depends on**:</p><p>- {#SENSOR_INFO}: Power supply is in critical state</p> | -|{#SNMPVALUE}: Temperature is above warning threshold |<p>This trigger uses temperature sensor values as well as temperature sensor status if available</p> |`avg(/Cisco CISCO-ENVMON-MIB SNMP/sensor.temp.value[ciscoEnvMonTemperatureValue.{#SNMPINDEX}],5m)>{$TEMP_WARN:"{#SNMPVALUE}"} or last(/Cisco CISCO-ENVMON-MIB SNMP/sensor.temp.status[ciscoEnvMonTemperatureState.{#SNMPINDEX}])={$TEMP_WARN_STATUS} `<p>Recovery expression:</p>`max(/Cisco CISCO-ENVMON-MIB SNMP/sensor.temp.value[ciscoEnvMonTemperatureValue.{#SNMPINDEX}],5m)<{$TEMP_WARN:"{#SNMPVALUE}"}-3` |WARNING |<p>**Depends on**:</p><p>- {#SNMPVALUE}: Temperature is above critical threshold</p> | -|{#SNMPVALUE}: Temperature is above critical threshold |<p>This trigger uses temperature sensor values as well as temperature sensor status if available</p> |`avg(/Cisco CISCO-ENVMON-MIB SNMP/sensor.temp.value[ciscoEnvMonTemperatureValue.{#SNMPINDEX}],5m)>{$TEMP_CRIT:"{#SNMPVALUE}"} or last(/Cisco CISCO-ENVMON-MIB SNMP/sensor.temp.status[ciscoEnvMonTemperatureState.{#SNMPINDEX}])={$TEMP_CRIT_STATUS} or last(/Cisco CISCO-ENVMON-MIB SNMP/sensor.temp.status[ciscoEnvMonTemperatureState.{#SNMPINDEX}])={$TEMP_DISASTER_STATUS} `<p>Recovery expression:</p>`max(/Cisco CISCO-ENVMON-MIB SNMP/sensor.temp.value[ciscoEnvMonTemperatureValue.{#SNMPINDEX}],5m)<{$TEMP_CRIT:"{#SNMPVALUE}"}-3` |HIGH | | -|{#SNMPVALUE}: Temperature is too low |<p>-</p> |`avg(/Cisco CISCO-ENVMON-MIB SNMP/sensor.temp.value[ciscoEnvMonTemperatureValue.{#SNMPINDEX}],5m)<{$TEMP_CRIT_LOW:"{#SNMPVALUE}"}`<p>Recovery expression:</p>`min(/Cisco CISCO-ENVMON-MIB SNMP/sensor.temp.value[ciscoEnvMonTemperatureValue.{#SNMPINDEX}],5m)>{$TEMP_CRIT_LOW:"{#SNMPVALUE}"}+3` |AVERAGE | | +|{#SENSOR_INFO}: Fan is in critical state |<p>Please check the fan unit</p> |`count(/Cisco CISCO-ENVMON-MIB by SNMP/sensor.fan.status[ciscoEnvMonFanState.{#SNMPINDEX}],#1,"eq","{$FAN_CRIT_STATUS:\"critical\"}")=1 or count(/Cisco CISCO-ENVMON-MIB by SNMP/sensor.fan.status[ciscoEnvMonFanState.{#SNMPINDEX}],#1,"eq","{$FAN_CRIT_STATUS:\"shutdown\"}")=1` |AVERAGE | | +|{#SENSOR_INFO}: Fan is in warning state |<p>Please check the fan unit</p> |`count(/Cisco CISCO-ENVMON-MIB by SNMP/sensor.fan.status[ciscoEnvMonFanState.{#SNMPINDEX}],#1,"eq","{$FAN_WARN_STATUS:\"warning\"}")=1 or count(/Cisco CISCO-ENVMON-MIB by SNMP/sensor.fan.status[ciscoEnvMonFanState.{#SNMPINDEX}],#1,"eq","{$FAN_WARN_STATUS:\"notFunctioning\"}")=1` |WARNING |<p>**Depends on**:</p><p>- {#SENSOR_INFO}: Fan is in critical state</p> | +|{#SENSOR_INFO}: Power supply is in critical state |<p>Please check the power supply unit for errors</p> |`count(/Cisco CISCO-ENVMON-MIB by SNMP/sensor.psu.status[ciscoEnvMonSupplyState.{#SNMPINDEX}],#1,"eq","{$PSU_CRIT_STATUS:\"critical\"}")=1 or count(/Cisco CISCO-ENVMON-MIB by SNMP/sensor.psu.status[ciscoEnvMonSupplyState.{#SNMPINDEX}],#1,"eq","{$PSU_CRIT_STATUS:\"shutdown\"}")=1` |AVERAGE | | +|{#SENSOR_INFO}: Power supply is in warning state |<p>Please check the power supply unit for errors</p> |`count(/Cisco CISCO-ENVMON-MIB by SNMP/sensor.psu.status[ciscoEnvMonSupplyState.{#SNMPINDEX}],#1,"eq","{$PSU_WARN_STATUS:\"warning\"}")=1 or count(/Cisco CISCO-ENVMON-MIB by SNMP/sensor.psu.status[ciscoEnvMonSupplyState.{#SNMPINDEX}],#1,"eq","{$PSU_WARN_STATUS:\"notFunctioning\"}")=1` |WARNING |<p>**Depends on**:</p><p>- {#SENSOR_INFO}: Power supply is in critical state</p> | +|{#SNMPVALUE}: Temperature is above warning threshold |<p>This trigger uses temperature sensor values as well as temperature sensor status if available</p> |`avg(/Cisco CISCO-ENVMON-MIB by SNMP/sensor.temp.value[ciscoEnvMonTemperatureValue.{#SNMPINDEX}],5m)>{$TEMP_WARN:"{#SNMPVALUE}"} or last(/Cisco CISCO-ENVMON-MIB by SNMP/sensor.temp.status[ciscoEnvMonTemperatureState.{#SNMPINDEX}])={$TEMP_WARN_STATUS} `<p>Recovery expression:</p>`max(/Cisco CISCO-ENVMON-MIB by SNMP/sensor.temp.value[ciscoEnvMonTemperatureValue.{#SNMPINDEX}],5m)<{$TEMP_WARN:"{#SNMPVALUE}"}-3` |WARNING |<p>**Depends on**:</p><p>- {#SNMPVALUE}: Temperature is above critical threshold</p> | +|{#SNMPVALUE}: Temperature is above critical threshold |<p>This trigger uses temperature sensor values as well as temperature sensor status if available</p> |`avg(/Cisco CISCO-ENVMON-MIB by SNMP/sensor.temp.value[ciscoEnvMonTemperatureValue.{#SNMPINDEX}],5m)>{$TEMP_CRIT:"{#SNMPVALUE}"} or last(/Cisco CISCO-ENVMON-MIB by SNMP/sensor.temp.status[ciscoEnvMonTemperatureState.{#SNMPINDEX}])={$TEMP_CRIT_STATUS} or last(/Cisco CISCO-ENVMON-MIB by SNMP/sensor.temp.status[ciscoEnvMonTemperatureState.{#SNMPINDEX}])={$TEMP_DISASTER_STATUS} `<p>Recovery expression:</p>`max(/Cisco CISCO-ENVMON-MIB by SNMP/sensor.temp.value[ciscoEnvMonTemperatureValue.{#SNMPINDEX}],5m)<{$TEMP_CRIT:"{#SNMPVALUE}"}-3` |HIGH | | +|{#SNMPVALUE}: Temperature is too low |<p>-</p> |`avg(/Cisco CISCO-ENVMON-MIB by SNMP/sensor.temp.value[ciscoEnvMonTemperatureValue.{#SNMPINDEX}],5m)<{$TEMP_CRIT_LOW:"{#SNMPVALUE}"}`<p>Recovery expression:</p>`min(/Cisco CISCO-ENVMON-MIB by SNMP/sensor.temp.value[ciscoEnvMonTemperatureValue.{#SNMPINDEX}],5m)>{$TEMP_CRIT_LOW:"{#SNMPVALUE}"}+3` |AVERAGE | | ## Feedback -Please report any issues with the template at https://support.zabbix.com +Please report any issues with the template at https://support.zabbix.com. |