diff options
Diffstat (limited to 'templates/net/zyxel_snmp/zyxel_ies-6000_snmp/README.md')
| -rw-r--r-- | templates/net/zyxel_snmp/zyxel_ies-6000_snmp/README.md | 56 |
1 files changed, 28 insertions, 28 deletions
diff --git a/templates/net/zyxel_snmp/zyxel_ies-6000_snmp/README.md b/templates/net/zyxel_snmp/zyxel_ies-6000_snmp/README.md index 701f04eb767..435f4107515 100644 --- a/templates/net/zyxel_snmp/zyxel_ies-6000_snmp/README.md +++ b/templates/net/zyxel_snmp/zyxel_ies-6000_snmp/README.md @@ -1,9 +1,9 @@ -# ZYXEL IES-6000 SNMP +# ZYXEL IES-6000 by SNMP ## Overview -For Zabbix version: 6.4 and higher +For Zabbix version: 6.4 and higher. https://service-provider.zyxel.com/global/en/products/msansdslams/central-msans/chassis-msans/ies-6000-series This template was tested on: @@ -43,9 +43,9 @@ There are no template links in this template. |Name|Description|Type|Key and additional info| |----|-----------|----|----| -|ADSL interface discovery |<p>-</p> |SNMP |zyxel.ies6000.net.adsl.discovery<p>**Preprocessing**:</p><p>- JAVASCRIPT: `The text is too long. Please see the template.`</p><p>**Filter**:</p>AND <p>- {#ZYXEL.IF.DESC} MATCHES_REGEX `{$ZYXEL.LLD.FILTER.IF.DESC.MATCHES}`</p><p>- {#ZYXEL.IF.DESC} NOT_MATCHES_REGEX `{$ZYXEL.LLD.FILTER.IF.DESC.NOT_MATCHES}`</p><p>- {#ZYXEL.IF.LINKSTATUS} MATCHES_REGEX `{$ZYXEL.LLD.FILTER.IF.LINKSTATUS.MATCHES}`</p><p>- {#ZYXEL.IF.LINKSTATUS} NOT_MATCHES_REGEX `{$ZYXEL.LLD.FILTER.IF.LINKSTATUS.NOT_MATCHES}`</p><p>- {#ZYXEL.IF.NAME} MATCHES_REGEX `adsl`</p><p>**Overrides:**</p><p>Don't create triggers for matching interface<br> - {#ZYXEL.IF.NAME} NOT_MATCHES_REGEX `{$ZYXEL.LLD.FILTER.IF.CONTROL.MATCHES}`<br> - TRIGGER_PROTOTYPE REGEXP `.*` - NO_DISCOVER</p> | +|ADSL interface discovery |<p>-</p> |SNMP |zyxel.ies6000.net.adsl.discovery<p>**Preprocessing**:</p><p>- JAVASCRIPT: `The text is too long. Please see the template.`</p><p>**Filter**:</p>AND <p>- {#ZYXEL.IF.DESC} MATCHES_REGEX `{$ZYXEL.LLD.FILTER.IF.DESC.MATCHES}`</p><p>- {#ZYXEL.IF.DESC} NOT_MATCHES_REGEX `{$ZYXEL.LLD.FILTER.IF.DESC.NOT_MATCHES}`</p><p>- {#ZYXEL.IF.LINKSTATUS} MATCHES_REGEX `{$ZYXEL.LLD.FILTER.IF.LINKSTATUS.MATCHES}`</p><p>- {#ZYXEL.IF.LINKSTATUS} NOT_MATCHES_REGEX `{$ZYXEL.LLD.FILTER.IF.LINKSTATUS.NOT_MATCHES}`</p><p>- {#ZYXEL.IF.NAME} MATCHES_REGEX `adsl`</p><p>**Overrides:**</p><p>Don't create triggers for matching interface<br> - {#ZYXEL.IF.NAME} NOT_MATCHES_REGEX `{$ZYXEL.LLD.FILTER.IF.CONTROL.MATCHES}`<br> - TRIGGER_PROTOTYPE REGEXP `.*`<br> - NO_DISCOVER</p> | |CPU discovery |<p>A table that contains CPU utilization information.</p><p>This table is supported by R1.03 and later versions.</p> |SNMP |zyxel.ies6000.cpu.discovery<p>**Preprocessing**:</p><p>- JAVASCRIPT: `The text is too long. Please see the template.`</p> | -|Ethernet interface discovery |<p>-</p> |SNMP |zyxel.ies6000.net.if.discovery<p>**Filter**:</p>AND <p>- {#ZYXEL.IF.DESC} MATCHES_REGEX `{$ZYXEL.LLD.FILTER.IF.DESC.MATCHES}`</p><p>- {#ZYXEL.IF.DESC} NOT_MATCHES_REGEX `{$ZYXEL.LLD.FILTER.IF.DESC.NOT_MATCHES}`</p><p>- {#ZYXEL.IF.LINKSTATUS} MATCHES_REGEX `{$ZYXEL.LLD.FILTER.IF.LINKSTATUS.MATCHES}`</p><p>- {#ZYXEL.IF.LINKSTATUS} NOT_MATCHES_REGEX `{$ZYXEL.LLD.FILTER.IF.LINKSTATUS.NOT_MATCHES}`</p><p>- {#ZYXEL.IF.NAME} MATCHES_REGEX `enet`</p><p>**Overrides:**</p><p>Don't create triggers for matching interface<br> - {#ZYXEL.IF.NAME} NOT_MATCHES_REGEX `{$ZYXEL.LLD.FILTER.IF.CONTROL.MATCHES}`<br> - TRIGGER_PROTOTYPE REGEXP `.*` - NO_DISCOVER</p> | +|Ethernet interface discovery |<p>-</p> |SNMP |zyxel.ies6000.net.if.discovery<p>**Filter**:</p>AND <p>- {#ZYXEL.IF.DESC} MATCHES_REGEX `{$ZYXEL.LLD.FILTER.IF.DESC.MATCHES}`</p><p>- {#ZYXEL.IF.DESC} NOT_MATCHES_REGEX `{$ZYXEL.LLD.FILTER.IF.DESC.NOT_MATCHES}`</p><p>- {#ZYXEL.IF.LINKSTATUS} MATCHES_REGEX `{$ZYXEL.LLD.FILTER.IF.LINKSTATUS.MATCHES}`</p><p>- {#ZYXEL.IF.LINKSTATUS} NOT_MATCHES_REGEX `{$ZYXEL.LLD.FILTER.IF.LINKSTATUS.NOT_MATCHES}`</p><p>- {#ZYXEL.IF.NAME} MATCHES_REGEX `enet`</p><p>**Overrides:**</p><p>Don't create triggers for matching interface<br> - {#ZYXEL.IF.NAME} NOT_MATCHES_REGEX `{$ZYXEL.LLD.FILTER.IF.CONTROL.MATCHES}`<br> - TRIGGER_PROTOTYPE REGEXP `.*`<br> - NO_DISCOVER</p> | |Fan discovery |<p>An entry in fanRpmTable.</p> |SNMP |zyxel.ies6000.fan.discovery | |Memory discovery |<p>A table that contains memory usage information.</p> |SNMP |zyxel.ies6000.memory.discovery<p>**Preprocessing**:</p><p>- JAVASCRIPT: `The text is too long. Please see the template.`</p> | |Packet buffer discovery |<p>A table that contains packet buffer usage information.</p> |SNMP |zyxel.ies6000.buffer.discovery<p>**Preprocessing**:</p><p>- JAVASCRIPT: `The text is too long. Please see the template.`</p> | @@ -121,34 +121,34 @@ There are no template links in this template. |Name|Description|Expression|Severity|Dependencies and additional info| |----|-----------|----|----|----| -|ZYXEL IES-6000: Slot {#ZYXEL.SLOT.ID} high CPU utilization |<p>CPU utilization is too high. The system might be slow to respond.</p> |`min(/ZYXEL IES-6000 SNMP/zyxel.ies6000.cpu[{#SNMPINDEX}],5m)>{#ZYXEL.CPU.THRESH.HIGH}` |WARNING | | -|ZYXEL IES-6000: FAN{#SNMPINDEX} is in critical state |<p>Please check the fan unit</p> |`last(/ZYXEL IES-6000 SNMP/zyxel.ies6000.fan[{#SNMPINDEX}])<{#ZYXEL.FANRPM.THRESH.LOW} or last(/ZYXEL IES-6000 SNMP/zyxel.ies6000.fan[{#SNMPINDEX}])>{#ZYXEL.FANRPM.THRESH.HIGH}` |AVERAGE | | -|ZYXEL IES-6000: Template does not match hardware |<p>This template is for Zyxel IES-6000, but connected to {ITEM.VALUE}</p> |`last(/ZYXEL IES-6000 SNMP/zyxel.ies6000.model)<>"IES-6000"` |INFO | | -|ZYXEL IES-6000: High memory utilization in Slot {#ZYXEL.SLOT.ID} pool |<p>The system is running out of free memory.</p> |`min(/ZYXEL IES-6000 SNMP/zyxel.ies6000.memory[{#SNMPINDEX}],5m)>{#ZYXEL.MEMORYHIGHTHRESH}` |AVERAGE | | -|ZYXEL IES-6000: High Packet buffer utilization in Slot {#ZYXEL.SLOT.ID} |<p>The system is running out of free buffer.</p> |`min(/ZYXEL IES-6000 SNMP/zyxel.ies6000.buffer[{#SNMPINDEX}],5m)>{#ZYXEL.BUFFERHIGHTHRESH}` |AVERAGE | | -|ZYXEL IES-6000: Slot {#ZYXEL.SLOT.ID}: Firmware has changed |<p>Firmware version has changed. Ack to close</p> |`last(/ZYXEL IES-6000 SNMP/zyxel.ies6000.slot.fw.ver[{#SNMPINDEX}],#1)<>last(/ZYXEL IES-6000 SNMP/zyxel.ies6000.slot.fw.ver[{#SNMPINDEX}],#2) and length(last(/ZYXEL IES-6000 SNMP/zyxel.ies6000.slot.fw.ver[{#SNMPINDEX}]))>0` |INFO |<p>Manual close: YES</p> | -|ZYXEL IES-6000: Slot {#ZYXEL.SLOT.ID}: Driver has changed |<p>Firmware version has changed. Ack to close</p> |`last(/ZYXEL IES-6000 SNMP/zyxel.ies6000.slot.dv.ver[{#SNMPINDEX}],#1)<>last(/ZYXEL IES-6000 SNMP/zyxel.ies6000.slot.dv.ver[{#SNMPINDEX}],#2) and length(last(/ZYXEL IES-6000 SNMP/zyxel.ies6000.slot.dv.ver[{#SNMPINDEX}]))>0` |INFO |<p>Manual close: YES</p> | -|ZYXEL IES-6000: Slot {#ZYXEL.SLOT.ID}: DSL modem code has changed |<p>Firmware version has changed. Ack to close</p> |`last(/ZYXEL IES-6000 SNMP/zyxel.ies6000.slot.cv.ver[{#SNMPINDEX}],#1)<>last(/ZYXEL IES-6000 SNMP/zyxel.ies6000.slot.cv.ver[{#SNMPINDEX}],#2) and length(last(/ZYXEL IES-6000 SNMP/zyxel.ies6000.slot.cv.ver[{#SNMPINDEX}]))>0` |INFO |<p>Manual close: YES</p> | -|ZYXEL IES-6000: Slot {#ZYXEL.SLOT.ID} alarm |<p>The slot reported an error.</p> |`find(/ZYXEL IES-6000 SNMP/zyxel.ies6000.slot.alarm[{#SNMPINDEX}],,"like","moduleNoDefect")=0` |AVERAGE | | -|ZYXEL IES-6000: Slot {#ZYXEL.SLOT.ID}: Hardware version has changed |<p>Firmware version has changed. Ack to close</p> |`last(/ZYXEL IES-6000 SNMP/zyxel.ies6000.slot.hw.ver[{#SNMPINDEX}],#1)<>last(/ZYXEL IES-6000 SNMP/zyxel.ies6000.slot.hw.ver[{#SNMPINDEX}],#2) and length(last(/ZYXEL IES-6000 SNMP/zyxel.ies6000.slot.hw.ver[{#SNMPINDEX}]))>0` |INFO |<p>Manual close: YES</p> | -|ZYXEL IES-6000: Slot {#ZYXEL.SLOT.ID} has been replaced |<p>Slot {#ZYXEL.SLOT.ID} serial number has changed. Ack to close</p> |`last(/ZYXEL IES-6000 SNMP/zyxel.ies6000.slot.serial[{#SNMPINDEX}],#1)<>last(/ZYXEL IES-6000 SNMP/zyxel.ies6000.slot.serial[{#SNMPINDEX}],#2) and length(last(/ZYXEL IES-6000 SNMP/zyxel.ies6000.slot.serial[{#SNMPINDEX}]))>0` |INFO |<p>Manual close: YES</p> | -|ZYXEL IES-6000: Slot {#ZYXEL.SLOT.ID} has been restarted |<p>Uptime is less than 10 minutes</p> |`last(/ZYXEL IES-6000 SNMP/zyxel.ies6000.slot.uptime[{#SNMPINDEX}])<10m` |INFO |<p>Manual close: YES</p> | -|ZYXEL IES-6000: Port {#SNMPINDEX}: Link down |<p>This trigger expression works as follows:</p><p>1. Can be triggered if operations status is down.</p><p>2. {TEMPLATE_NAME:METRIC.diff()}=1) - trigger fires only if operational status was up(1) sometime before. (So, do not fire 'ethernal off' interfaces.)</p><p>WARNING: if closed manually - won't fire again on next poll, because of .diff.</p> |`last(/ZYXEL IES-6000 SNMP/zyxel.ies6000.net.if.operstatus[{#SNMPINDEX}])=2 and (last(/ZYXEL IES-6000 SNMP/zyxel.ies6000.net.if.operstatus[{#SNMPINDEX}],#1)<>last(/ZYXEL IES-6000 SNMP/zyxel.ies6000.net.if.operstatus[{#SNMPINDEX}],#2))=1`<p>Recovery expression:</p>`last(/ZYXEL IES-6000 SNMP/zyxel.ies6000.net.if.operstatus[{#SNMPINDEX}])<>2` |AVERAGE |<p>Manual close: YES</p> | -|ZYXEL IES-6000: Slot {#ZYXEL.SLOT.ID} Port {#ZYXEL.PORTID}: Link down |<p>This trigger expression works as follows:</p><p>1. Can be triggered if operations status is down.</p><p>2. {TEMPLATE_NAME:METRIC.diff()}=1) - trigger fires only if operational status was up(1) sometime before. (So, do not fire 'ethernal off' interfaces.)</p><p>WARNING: if closed manually - won't fire again on next poll, because of .diff.</p> |`last(/ZYXEL IES-6000 SNMP/zyxel.ies6000.net.adsl.operstatus[{#SNMPINDEX}])=2 and last(/ZYXEL IES-6000 SNMP/zyxel.ies6000.net.adsl.operstatus[{#SNMPINDEX}],#1)<>last(/ZYXEL IES-6000 SNMP/zyxel.ies6000.net.adsl.operstatus[{#SNMPINDEX}],#2)`<p>Recovery expression:</p>`last(/ZYXEL IES-6000 SNMP/zyxel.ies6000.net.adsl.operstatus[{#SNMPINDEX}])<>2` |AVERAGE |<p>Manual close: YES</p> | -|ZYXEL IES-6000: Low the DSL line noise margins in Slot {#ZYXEL.SLOT.ID} Port {#ZYXEL.PORTID} |<p>Signal-to-noise margin (SNR Margin) which is the difference between the actual SNR and the SNR required to sync at a specific speed</p> |`min(/ZYXEL IES-6000 SNMP/zyxel.ies6000.net.adsl.atuc.snrmgn[{#SNMPINDEX}],5m)<{$ZYXEL.ADSL.SNR.MIN}` |WARNING | | -|ZYXEL IES-6000: High the DSL line attenuation in Slot {#ZYXEL.SLOT.ID} Port {#ZYXEL.PORTID} |<p>The reductions in amplitude of the downstream and upstream DSL signals.</p> |`min(/ZYXEL IES-6000 SNMP/zyxel.ies6000.net.adsl.atuc.atn[{#SNMPINDEX}],5m)>{$ZYXEL.ADSL.ATN.MAX}` |WARNING | | -|ZYXEL IES-6000: Low the DSL line noise margins in Slot {#ZYXEL.SLOT.ID} Port {#ZYXEL.PORTID} |<p>Signal-to-noise margin (SNR Margin) which is the difference between the actual SNR and the SNR required to sync at a specific speed</p> |`min(/ZYXEL IES-6000 SNMP/zyxel.ies6000.net.adsl.atur.snrmgn[{#SNMPINDEX}],5m)<{$ZYXEL.ADSL.SNR.MIN}` |WARNING | | -|ZYXEL IES-6000: High the DSL line attenuation in Slot {#ZYXEL.SLOT.ID} Port {#ZYXEL.PORTID} |<p>The reductions in amplitude of the downstream and upstream DSL signals.</p> |`min(/ZYXEL IES-6000 SNMP/zyxel.ies6000.net.adsl.atur.atn[{#SNMPINDEX}],5m)>{$ZYXEL.ADSL.ATN.MAX}` |WARNING | | -|ZYXEL IES-6000: Voltage Slot {#ZYXEL.SLOT.ID} {#ZYXEL.VOLT.NOMINAL} is in critical state |<p>Please check the power supply</p> |`last(/ZYXEL IES-6000 SNMP/zyxel.ies6000.volt[{#SNMPINDEX}])<{#ZYXEL.VOLT.THRESH.LOW} or last(/ZYXEL IES-6000 SNMP/zyxel.ies6000.volt[{#SNMPINDEX}])>{#ZYXEL.VOLT.THRESH.HIGH}` |AVERAGE | | -|ZYXEL IES-6000: No SNMP data collection |<p>SNMP is not available for polling. Please check device connectivity and SNMP settings.</p> |`max(/ZYXEL IES-6000 SNMP/zabbix[host,snmp,available],{$SNMP.TIMEOUT})=0` |WARNING | | -|ZYXEL IES-6000: Host has been restarted |<p>Uptime is less than 10 minutes.</p> |`(last(/ZYXEL IES-6000 SNMP/zyxel.ies6000.hw.uptime)>0 and last(/ZYXEL IES-6000 SNMP/zyxel.ies6000.hw.uptime)<10m) or (last(/ZYXEL IES-6000 SNMP/zyxel.ies6000.hw.uptime)=0 and last(/ZYXEL IES-6000 SNMP/zyxel.ies6000.net.uptime)<10m)` |INFO |<p>Manual close: YES</p> | -|ZYXEL IES-6000: Temperature Slot {#ZYXEL.SLOT.ID} Sensor: {#ZYXEL.TEMP.ID} is in critical state |<p>Please check the temperature</p> |`last(/ZYXEL IES-6000 SNMP/zyxel.ies6000.temp[{#SNMPINDEX}])>{#ZYXEL.TEMP.THRESH.HIGH} or last(/ZYXEL IES-6000 SNMP/zyxel.ies6000.temp[{#SNMPINDEX}])<{#ZYXEL.TEMP.THRESH.LOW}` |AVERAGE | | +|ZYXEL IES-6000: Slot {#ZYXEL.SLOT.ID} high CPU utilization |<p>CPU utilization is too high. The system might be slow to respond.</p> |`min(/ZYXEL IES-6000 by SNMP/zyxel.ies6000.cpu[{#SNMPINDEX}],5m)>{#ZYXEL.CPU.THRESH.HIGH}` |WARNING | | +|ZYXEL IES-6000: FAN{#SNMPINDEX} is in critical state |<p>Please check the fan unit</p> |`last(/ZYXEL IES-6000 by SNMP/zyxel.ies6000.fan[{#SNMPINDEX}])<{#ZYXEL.FANRPM.THRESH.LOW} or last(/ZYXEL IES-6000 by SNMP/zyxel.ies6000.fan[{#SNMPINDEX}])>{#ZYXEL.FANRPM.THRESH.HIGH}` |AVERAGE | | +|ZYXEL IES-6000: Template does not match hardware |<p>This template is for Zyxel IES-6000, but connected to {ITEM.VALUE}</p> |`last(/ZYXEL IES-6000 by SNMP/zyxel.ies6000.model)<>"IES-6000"` |INFO | | +|ZYXEL IES-6000: High memory utilization in Slot {#ZYXEL.SLOT.ID} pool |<p>The system is running out of free memory.</p> |`min(/ZYXEL IES-6000 by SNMP/zyxel.ies6000.memory[{#SNMPINDEX}],5m)>{#ZYXEL.MEMORYHIGHTHRESH}` |AVERAGE | | +|ZYXEL IES-6000: High Packet buffer utilization in Slot {#ZYXEL.SLOT.ID} |<p>The system is running out of free buffer.</p> |`min(/ZYXEL IES-6000 by SNMP/zyxel.ies6000.buffer[{#SNMPINDEX}],5m)>{#ZYXEL.BUFFERHIGHTHRESH}` |AVERAGE | | +|ZYXEL IES-6000: Slot {#ZYXEL.SLOT.ID}: Firmware has changed |<p>Firmware version has changed. Ack to close</p> |`last(/ZYXEL IES-6000 by SNMP/zyxel.ies6000.slot.fw.ver[{#SNMPINDEX}],#1)<>last(/ZYXEL IES-6000 by SNMP/zyxel.ies6000.slot.fw.ver[{#SNMPINDEX}],#2) and length(last(/ZYXEL IES-6000 by SNMP/zyxel.ies6000.slot.fw.ver[{#SNMPINDEX}]))>0` |INFO |<p>Manual close: YES</p> | +|ZYXEL IES-6000: Slot {#ZYXEL.SLOT.ID}: Driver has changed |<p>Firmware version has changed. Ack to close</p> |`last(/ZYXEL IES-6000 by SNMP/zyxel.ies6000.slot.dv.ver[{#SNMPINDEX}],#1)<>last(/ZYXEL IES-6000 by SNMP/zyxel.ies6000.slot.dv.ver[{#SNMPINDEX}],#2) and length(last(/ZYXEL IES-6000 by SNMP/zyxel.ies6000.slot.dv.ver[{#SNMPINDEX}]))>0` |INFO |<p>Manual close: YES</p> | +|ZYXEL IES-6000: Slot {#ZYXEL.SLOT.ID}: DSL modem code has changed |<p>Firmware version has changed. Ack to close</p> |`last(/ZYXEL IES-6000 by SNMP/zyxel.ies6000.slot.cv.ver[{#SNMPINDEX}],#1)<>last(/ZYXEL IES-6000 by SNMP/zyxel.ies6000.slot.cv.ver[{#SNMPINDEX}],#2) and length(last(/ZYXEL IES-6000 by SNMP/zyxel.ies6000.slot.cv.ver[{#SNMPINDEX}]))>0` |INFO |<p>Manual close: YES</p> | +|ZYXEL IES-6000: Slot {#ZYXEL.SLOT.ID} alarm |<p>The slot reported an error.</p> |`find(/ZYXEL IES-6000 by SNMP/zyxel.ies6000.slot.alarm[{#SNMPINDEX}],,"like","moduleNoDefect")=0` |AVERAGE | | +|ZYXEL IES-6000: Slot {#ZYXEL.SLOT.ID}: Hardware version has changed |<p>Firmware version has changed. Ack to close</p> |`last(/ZYXEL IES-6000 by SNMP/zyxel.ies6000.slot.hw.ver[{#SNMPINDEX}],#1)<>last(/ZYXEL IES-6000 by SNMP/zyxel.ies6000.slot.hw.ver[{#SNMPINDEX}],#2) and length(last(/ZYXEL IES-6000 by SNMP/zyxel.ies6000.slot.hw.ver[{#SNMPINDEX}]))>0` |INFO |<p>Manual close: YES</p> | +|ZYXEL IES-6000: Slot {#ZYXEL.SLOT.ID} has been replaced |<p>Slot {#ZYXEL.SLOT.ID} serial number has changed. Ack to close</p> |`last(/ZYXEL IES-6000 by SNMP/zyxel.ies6000.slot.serial[{#SNMPINDEX}],#1)<>last(/ZYXEL IES-6000 by SNMP/zyxel.ies6000.slot.serial[{#SNMPINDEX}],#2) and length(last(/ZYXEL IES-6000 by SNMP/zyxel.ies6000.slot.serial[{#SNMPINDEX}]))>0` |INFO |<p>Manual close: YES</p> | +|ZYXEL IES-6000: Slot {#ZYXEL.SLOT.ID} has been restarted |<p>Uptime is less than 10 minutes</p> |`last(/ZYXEL IES-6000 by SNMP/zyxel.ies6000.slot.uptime[{#SNMPINDEX}])<10m` |INFO |<p>Manual close: YES</p> | +|ZYXEL IES-6000: Port {#SNMPINDEX}: Link down |<p>This trigger expression works as follows:</p><p>1. Can be triggered if operations status is down.</p><p>2. {TEMPLATE_NAME:METRIC.diff()}=1) - trigger fires only if operational status was up(1) sometime before. (So, do not fire 'ethernal off' interfaces.)</p><p>WARNING: if closed manually - won't fire again on next poll, because of .diff.</p> |`last(/ZYXEL IES-6000 by SNMP/zyxel.ies6000.net.if.operstatus[{#SNMPINDEX}])=2 and (last(/ZYXEL IES-6000 by SNMP/zyxel.ies6000.net.if.operstatus[{#SNMPINDEX}],#1)<>last(/ZYXEL IES-6000 by SNMP/zyxel.ies6000.net.if.operstatus[{#SNMPINDEX}],#2))=1`<p>Recovery expression:</p>`last(/ZYXEL IES-6000 by SNMP/zyxel.ies6000.net.if.operstatus[{#SNMPINDEX}])<>2` |AVERAGE |<p>Manual close: YES</p> | +|ZYXEL IES-6000: Slot {#ZYXEL.SLOT.ID} Port {#ZYXEL.PORTID}: Link down |<p>This trigger expression works as follows:</p><p>1. Can be triggered if operations status is down.</p><p>2. {TEMPLATE_NAME:METRIC.diff()}=1) - trigger fires only if operational status was up(1) sometime before. (So, do not fire 'ethernal off' interfaces.)</p><p>WARNING: if closed manually - won't fire again on next poll, because of .diff.</p> |`last(/ZYXEL IES-6000 by SNMP/zyxel.ies6000.net.adsl.operstatus[{#SNMPINDEX}])=2 and last(/ZYXEL IES-6000 by SNMP/zyxel.ies6000.net.adsl.operstatus[{#SNMPINDEX}],#1)<>last(/ZYXEL IES-6000 by SNMP/zyxel.ies6000.net.adsl.operstatus[{#SNMPINDEX}],#2)`<p>Recovery expression:</p>`last(/ZYXEL IES-6000 by SNMP/zyxel.ies6000.net.adsl.operstatus[{#SNMPINDEX}])<>2` |AVERAGE |<p>Manual close: YES</p> | +|ZYXEL IES-6000: Low the DSL line noise margins in Slot {#ZYXEL.SLOT.ID} Port {#ZYXEL.PORTID} |<p>Signal-to-noise margin (SNR Margin) which is the difference between the actual SNR and the SNR required to sync at a specific speed</p> |`min(/ZYXEL IES-6000 by SNMP/zyxel.ies6000.net.adsl.atuc.snrmgn[{#SNMPINDEX}],5m)<{$ZYXEL.ADSL.SNR.MIN}` |WARNING | | +|ZYXEL IES-6000: High the DSL line attenuation in Slot {#ZYXEL.SLOT.ID} Port {#ZYXEL.PORTID} |<p>The reductions in amplitude of the downstream and upstream DSL signals.</p> |`min(/ZYXEL IES-6000 by SNMP/zyxel.ies6000.net.adsl.atuc.atn[{#SNMPINDEX}],5m)>{$ZYXEL.ADSL.ATN.MAX}` |WARNING | | +|ZYXEL IES-6000: Low the DSL line noise margins in Slot {#ZYXEL.SLOT.ID} Port {#ZYXEL.PORTID} |<p>Signal-to-noise margin (SNR Margin) which is the difference between the actual SNR and the SNR required to sync at a specific speed</p> |`min(/ZYXEL IES-6000 by SNMP/zyxel.ies6000.net.adsl.atur.snrmgn[{#SNMPINDEX}],5m)<{$ZYXEL.ADSL.SNR.MIN}` |WARNING | | +|ZYXEL IES-6000: High the DSL line attenuation in Slot {#ZYXEL.SLOT.ID} Port {#ZYXEL.PORTID} |<p>The reductions in amplitude of the downstream and upstream DSL signals.</p> |`min(/ZYXEL IES-6000 by SNMP/zyxel.ies6000.net.adsl.atur.atn[{#SNMPINDEX}],5m)>{$ZYXEL.ADSL.ATN.MAX}` |WARNING | | +|ZYXEL IES-6000: Voltage Slot {#ZYXEL.SLOT.ID} {#ZYXEL.VOLT.NOMINAL} is in critical state |<p>Please check the power supply</p> |`last(/ZYXEL IES-6000 by SNMP/zyxel.ies6000.volt[{#SNMPINDEX}])<{#ZYXEL.VOLT.THRESH.LOW} or last(/ZYXEL IES-6000 by SNMP/zyxel.ies6000.volt[{#SNMPINDEX}])>{#ZYXEL.VOLT.THRESH.HIGH}` |AVERAGE | | +|ZYXEL IES-6000: No SNMP data collection |<p>SNMP is not available for polling. Please check device connectivity and SNMP settings.</p> |`max(/ZYXEL IES-6000 by SNMP/zabbix[host,snmp,available],{$SNMP.TIMEOUT})=0` |WARNING | | +|ZYXEL IES-6000: Host has been restarted |<p>Uptime is less than 10 minutes.</p> |`(last(/ZYXEL IES-6000 by SNMP/zyxel.ies6000.hw.uptime)>0 and last(/ZYXEL IES-6000 by SNMP/zyxel.ies6000.hw.uptime)<10m) or (last(/ZYXEL IES-6000 by SNMP/zyxel.ies6000.hw.uptime)=0 and last(/ZYXEL IES-6000 by SNMP/zyxel.ies6000.net.uptime)<10m)` |INFO |<p>Manual close: YES</p> | +|ZYXEL IES-6000: Temperature Slot {#ZYXEL.SLOT.ID} Sensor: {#ZYXEL.TEMP.ID} is in critical state |<p>Please check the temperature</p> |`last(/ZYXEL IES-6000 by SNMP/zyxel.ies6000.temp[{#SNMPINDEX}])>{#ZYXEL.TEMP.THRESH.HIGH} or last(/ZYXEL IES-6000 by SNMP/zyxel.ies6000.temp[{#SNMPINDEX}])<{#ZYXEL.TEMP.THRESH.LOW}` |AVERAGE | | ## Feedback -Please report any issues with the template at https://support.zabbix.com +Please report any issues with the template at https://support.zabbix.com. -You can also provide feedback, discuss the template or ask for help with it at [ZABBIX forums](https://www.zabbix.com/forum/zabbix-suggestions-and-feedback/422668-discussion-thread-for-official-zabbix-templates-for-zyxel). +You can also provide feedback, discuss the template, or ask for help at [ZABBIX forums](https://www.zabbix.com/forum/zabbix-suggestions-and-feedback/422668-discussion-thread-for-official-zabbix-templates-for-zyxel). ## Known Issues |