diff options
Diffstat (limited to 'templates/net/zyxel_snmp/zyxel_ies1248-51_snmp/README.md')
| -rw-r--r-- | templates/net/zyxel_snmp/zyxel_ies1248-51_snmp/README.md | 42 |
1 files changed, 21 insertions, 21 deletions
diff --git a/templates/net/zyxel_snmp/zyxel_ies1248-51_snmp/README.md b/templates/net/zyxel_snmp/zyxel_ies1248-51_snmp/README.md index f6bbb6c5f04..471997becc6 100644 --- a/templates/net/zyxel_snmp/zyxel_ies1248-51_snmp/README.md +++ b/templates/net/zyxel_snmp/zyxel_ies1248-51_snmp/README.md @@ -1,9 +1,9 @@ -# ZYXEL IES1248-51 SNMP +# ZYXEL IES1248-51 by SNMP ## Overview -For Zabbix version: 6.4 and higher +For Zabbix version: 6.4 and higher. http://origin-eu.zyxel.com/products_services/ies_1248_51v.shtml?t=p This template was tested on: @@ -39,8 +39,8 @@ There are no template links in this template. |Name|Description|Type|Key and additional info| |----|-----------|----|----| -|ADSL interface discovery |<p>-</p> |SNMP |zyxel.ies1248.net.adsl.discovery<p>**Filter**:</p>AND <p>- {#ZYXEL.IF.LINKSTATUS} MATCHES_REGEX `{$ZYXEL.LLD.FILTER.IF.LINKSTATUS.MATCHES}`</p><p>- {#ZYXEL.IF.LINKSTATUS} NOT_MATCHES_REGEX `{$ZYXEL.LLD.FILTER.IF.LINKSTATUS.NOT_MATCHES}`</p><p>- {#ZYXEL.IF.NAME} MATCHES_REGEX `adsl`</p><p>**Overrides:**</p><p>Don't create triggers for matching interface<br> - {#ZYXEL.IF.NAME} NOT_MATCHES_REGEX `{$ZYXEL.LLD.FILTER.IF.CONTROL.MATCHES}`<br> - TRIGGER_PROTOTYPE REGEXP `.*` - NO_DISCOVER</p> | -|Ethernet interface discovery |<p>-</p> |SNMP |zyxel.ies1248.net.if.discovery<p>**Filter**:</p>AND <p>- {#ZYXEL.IF.LINKSTATUS} MATCHES_REGEX `{$ZYXEL.LLD.FILTER.IF.LINKSTATUS.MATCHES}`</p><p>- {#ZYXEL.IF.LINKSTATUS} NOT_MATCHES_REGEX `{$ZYXEL.LLD.FILTER.IF.LINKSTATUS.NOT_MATCHES}`</p><p>- {#ZYXEL.IF.NAME} MATCHES_REGEX `enet`</p><p>**Overrides:**</p><p>Trigger disabled<br> - {#ZYXEL.IF.NAME} MATCHES_REGEX `.*`<br> - TRIGGER_PROTOTYPE REGEXP `.*` - NO_DISCOVER</p><p>Trigger enabled<br> - {#ZYXEL.IF.NAME} MATCHES_REGEX `{$ZYXEL.LLD.FILTER.IF.CONTROL.MATCHES}`<br> - TRIGGER_PROTOTYPE REGEXP `.*` - DISCOVER</p> | +|ADSL interface discovery |<p>-</p> |SNMP |zyxel.ies1248.net.adsl.discovery<p>**Filter**:</p>AND <p>- {#ZYXEL.IF.LINKSTATUS} MATCHES_REGEX `{$ZYXEL.LLD.FILTER.IF.LINKSTATUS.MATCHES}`</p><p>- {#ZYXEL.IF.LINKSTATUS} NOT_MATCHES_REGEX `{$ZYXEL.LLD.FILTER.IF.LINKSTATUS.NOT_MATCHES}`</p><p>- {#ZYXEL.IF.NAME} MATCHES_REGEX `adsl`</p><p>**Overrides:**</p><p>Don't create triggers for matching interface<br> - {#ZYXEL.IF.NAME} NOT_MATCHES_REGEX `{$ZYXEL.LLD.FILTER.IF.CONTROL.MATCHES}`<br> - TRIGGER_PROTOTYPE REGEXP `.*`<br> - NO_DISCOVER</p> | +|Ethernet interface discovery |<p>-</p> |SNMP |zyxel.ies1248.net.if.discovery<p>**Filter**:</p>AND <p>- {#ZYXEL.IF.LINKSTATUS} MATCHES_REGEX `{$ZYXEL.LLD.FILTER.IF.LINKSTATUS.MATCHES}`</p><p>- {#ZYXEL.IF.LINKSTATUS} NOT_MATCHES_REGEX `{$ZYXEL.LLD.FILTER.IF.LINKSTATUS.NOT_MATCHES}`</p><p>- {#ZYXEL.IF.NAME} MATCHES_REGEX `enet`</p><p>**Overrides:**</p><p>Trigger disabled<br> - {#ZYXEL.IF.NAME} MATCHES_REGEX `.*`<br> - TRIGGER_PROTOTYPE REGEXP `.*`<br> - NO_DISCOVER</p><p>Trigger enabled<br> - {#ZYXEL.IF.NAME} MATCHES_REGEX `{$ZYXEL.LLD.FILTER.IF.CONTROL.MATCHES}`<br> - TRIGGER_PROTOTYPE REGEXP `.*`<br> - DISCOVER</p> | |Fan discovery |<p>An entry in fanRpmTable.</p> |SNMP |zyxel.ies1248.fan.discovery | |Temperature discovery |<p>An entry in tempTable.</p> |SNMP |zyxel.ies1248.temp.discovery | |Voltage discovery |<p>An entry in voltageTable.</p> |SNMP |zyxel.ies1248.volt.discovery<p>**Preprocessing**:</p><p>- JAVASCRIPT: `The text is too long. Please see the template.`</p> | @@ -84,27 +84,27 @@ There are no template links in this template. |Name|Description|Expression|Severity|Dependencies and additional info| |----|-----------|----|----|----| -|ZYXEL IES1248-51: FAN{#SNMPINDEX} is in critical state |<p>Please check the fan unit</p> |`last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.fan[{#SNMPINDEX}])<{#ZYXEL.FANRPM.THRESH.LOW}` |AVERAGE | | -|ZYXEL IES1248-51: Template does not match hardware |<p>This template is for Zyxel IES1248-51, but connected to {ITEM.VALUE}</p> |`last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.model)<>"IES1248-51"` |INFO | | -|ZYXEL IES1248-51: Firmware has changed |<p>Firmware version has changed. Ack to close</p> |`last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.fwversion,#1)<>last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.fwversion,#2) and length(last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.fwversion))>0` |INFO |<p>Manual close: YES</p> | -|ZYXEL IES1248-51: Device has been replaced |<p>Device serial number has changed. Ack to close</p> |`last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.serialnumber,#1)<>last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.serialnumber,#2) and length(last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.serialnumber))>0` |INFO |<p>Manual close: YES</p> | -|ZYXEL IES1248-51: Port {#ZYXEL.IF.NAME}: Link down |<p>This trigger expression works as follows:</p><p>1. Can be triggered if operations status is down.</p><p>2. {TEMPLATE_NAME:METRIC.diff()}=1) - trigger fires only if operational status was up(1) sometime before. (So, do not fire 'ethernal off' interfaces.)</p><p>WARNING: if closed manually - won't fire again on next poll, because of .diff.</p> |`last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.net.if.operstatus[{#SNMPINDEX}])=2 and last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.net.if.operstatus[{#SNMPINDEX}],#1)<>last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.net.if.operstatus[{#SNMPINDEX}],#2)`<p>Recovery expression:</p>`last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.net.if.operstatus[{#SNMPINDEX}])<>2` |AVERAGE |<p>Manual close: YES</p> | -|ZYXEL IES1248-51: Port {#SNMPINDEX}: Link down |<p>This trigger expression works as follows:</p><p>1. Can be triggered if operations status is down.</p><p>2. {TEMPLATE_NAME:METRIC.diff()}=1) - trigger fires only if operational status was up(1) sometime before. (So, do not fire 'ethernal off' interfaces.)</p><p>WARNING: if closed manually - won't fire again on next poll, because of .diff.</p> |`last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.net.adsl.operstatus[{#SNMPINDEX}])=2 and last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.net.adsl.operstatus[{#SNMPINDEX}],#1)<>last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.net.adsl.operstatus[{#SNMPINDEX}],#2)`<p>Recovery expression:</p>`last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.net.adsl.operstatus[{#SNMPINDEX}])<>2` |AVERAGE |<p>Manual close: YES</p> | -|ZYXEL IES1248-51: Low the DSL line noise margins in Port {#SNMPINDEX} |<p>Signal-to-noise margin (SNR Margin) which is the difference between the actual SNR and the SNR required to sync at a specific speed</p> |`min(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.net.adsl.atuc.snrmgn[{#SNMPINDEX}],5m)<{$ZYXEL.ADSL.SNR.MIN}` |WARNING | | -|ZYXEL IES1248-51: High the DSL line attenuation in Port {#SNMPINDEX} |<p>The reductions in amplitude of the downstream and upstream DSL signals.</p> |`min(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.net.adsl.atuc.atn[{#SNMPINDEX}],5m)>{$ZYXEL.ADSL.ATN.MAX}` |WARNING | | -|ZYXEL IES1248-51: Low the DSL line noise margins in Port {#SNMPINDEX} |<p>Signal-to-noise margin (SNR Margin) which is the difference between the actual SNR and the SNR required to sync at a specific speed</p> |`min(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.net.adsl.atur.snrmgn[{#SNMPINDEX}],5m)<{$ZYXEL.ADSL.SNR.MIN}` |WARNING | | -|ZYXEL IES1248-51: High the DSL line attenuation in Port {#SNMPINDEX} |<p>The reductions in amplitude of the downstream and upstream DSL signals.</p> |`min(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.net.adsl.atur.atn[{#SNMPINDEX}],5m)>{$ZYXEL.ADSL.ATN.MAX}` |WARNING | | -|ZYXEL IES1248-51: Voltage {#ZYXEL.VOLT.NOMINAL} is in critical state |<p>Please check the power supply</p> |`last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.volt[{#SNMPINDEX}])<{#ZYXEL.VOLT.THRESH.LOW}` |AVERAGE | | -|ZYXEL IES1248-51: No SNMP data collection |<p>SNMP is not available for polling. Please check device connectivity and SNMP settings.</p> |`max(/ZYXEL IES1248-51 SNMP/zabbix[host,snmp,available],{$SNMP.TIMEOUT})=0` |WARNING | | -|ZYXEL IES1248-51: Host has been restarted |<p>Uptime is less than 10 minutes.</p> |`(last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.hw.uptime)>0 and last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.hw.uptime)<10m) or (last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.hw.uptime)=0 and last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.net.uptime)<10m)` |INFO |<p>Manual close: YES</p> | -|ZYXEL IES1248-51: Port {#SNMPINDEX} alarm |<p>The slot reported an error.</p> |`find(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.slot.alarm,,"like","moduleNoDefect")=0` |AVERAGE | | -|ZYXEL IES1248-51: Temperature {#ZYXEL.TEMP.ID} is in critical state |<p>Please check the temperature</p> |`last(/ZYXEL IES1248-51 SNMP/zyxel.ies1248.temp[{#SNMPINDEX}])>{#ZYXEL.TEMP.THRESH.HIGH}` |AVERAGE | | +|ZYXEL IES1248-51: FAN{#SNMPINDEX} is in critical state |<p>Please check the fan unit</p> |`last(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.fan[{#SNMPINDEX}])<{#ZYXEL.FANRPM.THRESH.LOW}` |AVERAGE | | +|ZYXEL IES1248-51: Template does not match hardware |<p>This template is for Zyxel IES1248-51, but connected to {ITEM.VALUE}</p> |`last(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.model)<>"IES1248-51"` |INFO | | +|ZYXEL IES1248-51: Firmware has changed |<p>Firmware version has changed. Ack to close</p> |`last(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.fwversion,#1)<>last(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.fwversion,#2) and length(last(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.fwversion))>0` |INFO |<p>Manual close: YES</p> | +|ZYXEL IES1248-51: Device has been replaced |<p>Device serial number has changed. Ack to close</p> |`last(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.serialnumber,#1)<>last(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.serialnumber,#2) and length(last(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.serialnumber))>0` |INFO |<p>Manual close: YES</p> | +|ZYXEL IES1248-51: Port {#ZYXEL.IF.NAME}: Link down |<p>This trigger expression works as follows:</p><p>1. Can be triggered if operations status is down.</p><p>2. {TEMPLATE_NAME:METRIC.diff()}=1) - trigger fires only if operational status was up(1) sometime before. (So, do not fire 'ethernal off' interfaces.)</p><p>WARNING: if closed manually - won't fire again on next poll, because of .diff.</p> |`last(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.net.if.operstatus[{#SNMPINDEX}])=2 and last(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.net.if.operstatus[{#SNMPINDEX}],#1)<>last(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.net.if.operstatus[{#SNMPINDEX}],#2)`<p>Recovery expression:</p>`last(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.net.if.operstatus[{#SNMPINDEX}])<>2` |AVERAGE |<p>Manual close: YES</p> | +|ZYXEL IES1248-51: Port {#SNMPINDEX}: Link down |<p>This trigger expression works as follows:</p><p>1. Can be triggered if operations status is down.</p><p>2. {TEMPLATE_NAME:METRIC.diff()}=1) - trigger fires only if operational status was up(1) sometime before. (So, do not fire 'ethernal off' interfaces.)</p><p>WARNING: if closed manually - won't fire again on next poll, because of .diff.</p> |`last(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.net.adsl.operstatus[{#SNMPINDEX}])=2 and last(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.net.adsl.operstatus[{#SNMPINDEX}],#1)<>last(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.net.adsl.operstatus[{#SNMPINDEX}],#2)`<p>Recovery expression:</p>`last(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.net.adsl.operstatus[{#SNMPINDEX}])<>2` |AVERAGE |<p>Manual close: YES</p> | +|ZYXEL IES1248-51: Low the DSL line noise margins in Port {#SNMPINDEX} |<p>Signal-to-noise margin (SNR Margin) which is the difference between the actual SNR and the SNR required to sync at a specific speed</p> |`min(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.net.adsl.atuc.snrmgn[{#SNMPINDEX}],5m)<{$ZYXEL.ADSL.SNR.MIN}` |WARNING | | +|ZYXEL IES1248-51: High the DSL line attenuation in Port {#SNMPINDEX} |<p>The reductions in amplitude of the downstream and upstream DSL signals.</p> |`min(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.net.adsl.atuc.atn[{#SNMPINDEX}],5m)>{$ZYXEL.ADSL.ATN.MAX}` |WARNING | | +|ZYXEL IES1248-51: Low the DSL line noise margins in Port {#SNMPINDEX} |<p>Signal-to-noise margin (SNR Margin) which is the difference between the actual SNR and the SNR required to sync at a specific speed</p> |`min(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.net.adsl.atur.snrmgn[{#SNMPINDEX}],5m)<{$ZYXEL.ADSL.SNR.MIN}` |WARNING | | +|ZYXEL IES1248-51: High the DSL line attenuation in Port {#SNMPINDEX} |<p>The reductions in amplitude of the downstream and upstream DSL signals.</p> |`min(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.net.adsl.atur.atn[{#SNMPINDEX}],5m)>{$ZYXEL.ADSL.ATN.MAX}` |WARNING | | +|ZYXEL IES1248-51: Voltage {#ZYXEL.VOLT.NOMINAL} is in critical state |<p>Please check the power supply</p> |`last(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.volt[{#SNMPINDEX}])<{#ZYXEL.VOLT.THRESH.LOW}` |AVERAGE | | +|ZYXEL IES1248-51: No SNMP data collection |<p>SNMP is not available for polling. Please check device connectivity and SNMP settings.</p> |`max(/ZYXEL IES1248-51 by SNMP/zabbix[host,snmp,available],{$SNMP.TIMEOUT})=0` |WARNING | | +|ZYXEL IES1248-51: Host has been restarted |<p>Uptime is less than 10 minutes.</p> |`(last(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.hw.uptime)>0 and last(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.hw.uptime)<10m) or (last(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.hw.uptime)=0 and last(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.net.uptime)<10m)` |INFO |<p>Manual close: YES</p> | +|ZYXEL IES1248-51: Port {#SNMPINDEX} alarm |<p>The slot reported an error.</p> |`find(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.slot.alarm,,"like","moduleNoDefect")=0` |AVERAGE | | +|ZYXEL IES1248-51: Temperature {#ZYXEL.TEMP.ID} is in critical state |<p>Please check the temperature</p> |`last(/ZYXEL IES1248-51 by SNMP/zyxel.ies1248.temp[{#SNMPINDEX}])>{#ZYXEL.TEMP.THRESH.HIGH}` |AVERAGE | | ## Feedback -Please report any issues with the template at https://support.zabbix.com +Please report any issues with the template at https://support.zabbix.com. -You can also provide feedback, discuss the template or ask for help with it at [ZABBIX forums](https://www.zabbix.com/forum/zabbix-suggestions-and-feedback/422668-discussion-thread-for-official-zabbix-templates-for-zyxel). +You can also provide feedback, discuss the template, or ask for help at [ZABBIX forums](https://www.zabbix.com/forum/zabbix-suggestions-and-feedback/422668-discussion-thread-for-official-zabbix-templates-for-zyxel). ## Known Issues |