1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
|
# NetApp FAS3220 by SNMP
## Overview
For Zabbix version: 6.4 and higher.
The template to monitor SAN NetApp FAS3220 cluster by Zabbix SNMP agent.
This template was tested on:
- NetApp FAS3220, firmware version: 5.3.0
## Setup
> See [Zabbix template operation](https://www.zabbix.com/documentation/6.4/manual/config/templates_out_of_the_box/network_devices) for basic instructions.
1\. Create a host for FAS3220 with cluster management IP as SNMPv2 interface.
2\. Link the template to the host.
3\. Customize macro values if needed.
## Zabbix configuration
No specific Zabbix configuration is required.
### Macros used
|Name|Description|Default|
|----|-----------|-------|
|{$CPU.UTIL.CRIT} |<p>The critical threshold of the CPU utilization in %.</p> |`90` |
|{$FAS3220.FS.AVAIL.MIN.CRIT} |<p>Minimum available space on the disk. Can be used with {#FSNAME} as context.</p> |`10G` |
|{$FAS3220.FS.NAME.MATCHES} |<p>This macro is used in filesystems discovery. Can be overridden on the host or linked template level.</p> |`.*` |
|{$FAS3220.FS.NAME.NOT_MATCHES} |<p>This macro is used in filesystems discovery. Can be overridden on the host or linked template level.</p> |`snapshot` |
|{$FAS3220.FS.PUSED.MAX.CRIT} |<p>Maximum percentage of disk used. Can be used with {#FSNAME} as context.</p> |`90` |
|{$FAS3220.FS.TIME} |<p>The time during which disk usage may exceed the threshold. Can be used with {#FSNAME} as context.</p> |`10m` |
|{$FAS3220.FS.TYPE.MATCHES} |<p>This macro is used in filesystems discovery. Can be overridden on the host or linked template level.</p><p>Value should be integer:</p><p> 2 - flexibleVolume,</p><p> 3 - aggregate,</p><p> 4 - stripedAggregate,</p><p> 5 - stripedVolume.</p> |`.*` |
|{$FAS3220.FS.TYPE.NOT_MATCHES} |<p>This macro is used in filesystems discovery. Can be overridden on the host or linked template level.</p><p>Value should be integer:</p><p> 2 - flexibleVolume,</p><p> 3 - aggregate,</p><p> 4 - stripedAggregate,</p><p> 5 - stripedVolume.</p> |`CHANGE_IF_NEEDED` |
|{$FAS3220.FS.USE.PCT} |<p>Macro define what threshold will be used for disk space trigger:</p><p> 0 - use Bytes ({$FAS3220.FS.AVAIL.MIN.CRIT})</p><p> 1 - use percents ({$FAS3220.FS.PUSED.MAX.CRIT})</p><p>Can be used with {#FSNAME} as context.</p> |`1` |
|{$FAS3220.NET.PORT.NAME.MATCHES} |<p>This macro is used in net ports discovery. Can be overridden on the host or linked template level.</p> |`.*` |
|{$FAS3220.NET.PORT.NAME.NOT_MATCHES} |<p>This macro is used in net ports discovery. Can be overridden on the host or linked template level.</p> |`CHANGE_IF_NEEDED` |
|{$FAS3220.NET.PORT.ROLE.MATCHES} |<p>This macro is used in net ports discovery. Can be overridden on the host or linked template level.</p><p>{#ROLE} is integer. Possible values:</p><p> 0 - undef</p><p> 1 - cluster</p><p> 2 - data</p><p> 3 - node-mgmt</p><p> 4 - intercluster</p><p> 5 - cluster-mgmt</p> |`.*` |
|{$FAS3220.NET.PORT.ROLE.NOT_MATCHES} |<p>This macro is used in net ports discovery. Can be overridden on the host or linked template level.</p><p>{#ROLE} is integer. Possible values:</p><p> 0 - undef</p><p> 1 - cluster</p><p> 2 - data</p><p> 3 - node-mgmt</p><p> 4 - intercluster</p><p> 5 - cluster-mgmt</p> |`CHANGE_IF_NEEDED` |
|{$FAS3220.NET.PORT.TYPE.MATCHES} |<p>This macro is used in net ports discovery. Can be overridden on the host or linked template level.</p><p>{#TYPE} is integer. Possible values: physical, if-group, vlan, undef.</p> |`.*` |
|{$FAS3220.NET.PORT.TYPE.NOT_MATCHES} |<p>This macro is used in net ports discovery. Can be overridden on the host or linked template level.</p><p>{#TYPE} is integer. Possible values: physical, if-group, vlan, undef.</p> |`CHANGE_IF_NEEDED` |
|{$ICMP_LOSS_WARN} |<p>-</p> |`20` |
|{$ICMP_RESPONSE_TIME_WARN} |<p>-</p> |`0.15` |
|{$IF.ERRORS.WARN} |<p>-</p> |`` |
|{$IF.UTIL.MAX} |<p>-</p> |`95` |
|{$SNMP.TIMEOUT} |<p>-</p> |`5m` |
## Template links
There are no template links in this template.
## Discovery rules
|Name|Description|Type|Key and additional info|
|----|-----------|----|----|
|Cluster metrics discovery |<p>Discovery of Cluster metrics per node</p> |SNMP |fas3220.cluster.discovery |
|CPU discovery |<p>Discovery of CPU metrics per node</p> |SNMP |fas3220.cpu.discovery |
|Filesystems discovery |<p>Filesystems discovery with filter.</p> |SNMP |fas3220.fs.discovery<p>**Filter**:</p>AND <p>- {#FSTYPE} MATCHES_REGEX `{$FAS3220.FS.TYPE.MATCHES}`</p><p>- {#FSTYPE} NOT_MATCHES_REGEX `{$FAS3220.FS.TYPE.NOT_MATCHES}`</p><p>- {#FSNAME} MATCHES_REGEX `{$FAS3220.FS.NAME.MATCHES}`</p><p>- {#FSNAME} NOT_MATCHES_REGEX `{$FAS3220.FS.NAME.NOT_MATCHES}`</p><p>**Overrides:**</p><p>Do not discover aggregate metrics<br> - {#FSTYPE} MATCHES_REGEX `3|4`<br> - ITEM_PROTOTYPE LIKE `Saved`<br> - NO_DISCOVER</p> |
|HA discovery |<p>Discovery of high availability metrics per node</p> |SNMP |fas3220.ha.discovery |
|Network ports discovery |<p>Network interfaces discovery with filter.</p> |SNMP |fas3220.net.discovery<p>**Preprocessing**:</p><p>- JAVASCRIPT: `The text is too long. Please see the template.`</p><p>**Filter**:</p>AND <p>- {#TYPE} MATCHES_REGEX `{$FAS3220.NET.PORT.TYPE.MATCHES}`</p><p>- {#TYPE} NOT_MATCHES_REGEX `{$FAS3220.NET.PORT.TYPE.NOT_MATCHES}`</p><p>- {#ROLE} MATCHES_REGEX `{$FAS3220.NET.PORT.ROLE.MATCHES}`</p><p>- {#TYPE} NOT_MATCHES_REGEX `{$FAS3220.NET.PORT.ROLE.NOT_MATCHES}`</p><p>- {#IFNAME} MATCHES_REGEX `{$FAS3220.NET.PORT.NAME.MATCHES}`</p><p>- {#IFNAME} NOT_MATCHES_REGEX `{$FAS3220.NET.PORT.NAME.NOT_MATCHES}`</p> |
## Items collected
|Group|Name|Description|Type|Key and additional info|
|-----|----|-----------|----|---------------------|
|CPU |Node {#NODE.NAME}: CPU utilization |<p>The average, over the last minute, of the percentage of time that this processor was not idle.</p> |SNMP |fas3220.cpu[cDOTCpuBusyTimePerCent, "{#NODE.NAME}"] |
|General |SNMP traps (fallback) |<p>The item is used to collect all SNMP traps unmatched by other snmptrap items</p> |SNMP_TRAP |snmptrap.fallback |
|General |System location |<p>MIB: SNMPv2-MIB</p><p>The physical location of this node (e.g., `telephone closet, 3rd floor'). If the location is unknown, the value is the zero-length string.</p> |SNMP |system.location[sysLocation.0]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `12h`</p> |
|General |System contact details |<p>MIB: SNMPv2-MIB</p><p>The textual identification of the contact person for this managed node, together with information on how to contact this person. If no contact information is known, the value is the zero-length string.</p> |SNMP |system.contact[sysContact.0]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `12h`</p> |
|General |System object ID |<p>MIB: SNMPv2-MIB</p><p>The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining`what kind of box' is being managed. For example, if vendor`Flintstones, Inc.' was assigned the subtree1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its `Fred Router'.</p> |SNMP |system.objectid[sysObjectID.0]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `12h`</p> |
|General |System name |<p>MIB: SNMPv2-MIB</p><p>An administratively-assigned name for this managed node.By convention, this is the node's fully-qualified domain name. If the name is unknown, the value is the zero-length string.</p> |SNMP |system.name<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `12h`</p> |
|General |System description |<p>MIB: SNMPv2-MIB</p><p>A textual description of the entity. This value should</p><p>include the full name and version identification of the system's hardware type, software operating-system, and</p><p>networking software.</p> |SNMP |system.descr[sysDescr.0]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `12h`</p> |
|NetApp FAS3220 |NetApp FAS3220: Product version |<p>MIB: NETAPP-MIB</p><p>Version string for the software running on this platform.</p> |SNMP |fas3220.inventory[productVersion]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `6h`</p> |
|NetApp FAS3220 |NetApp FAS3220: Product firmware version |<p>Version string for the firmware running on this platform.</p> |SNMP |fas3220.inventory[productFirmwareVersion]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `6h`</p> |
|NetApp FAS3220 |NetApp FAS3220: Failed disks count |<p>The number of disks that are currently broken.</p> |SNMP |fas3220.disk[diskFailedCount]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `10m`</p> |
|NetApp FAS3220 |NetApp FAS3220: Failed disks message |<p>If diskFailedCount is non-zero, this is a string describing the failed disk or disks. Each failed disk is described.</p> |SNMP |fas3220.disk[diskFailedMessage]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `6h`</p> |
|NetApp FAS3220 |Node {#NODE.NAME}: Location |<p>Node Location. Same as sysLocation for a specific node.</p> |SNMP |fas3220.cluster[nodeLocation, "{#NODE.NAME}"]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `6h`</p> |
|NetApp FAS3220 |Node {#NODE.NAME}: Model |<p>Node Model. Same as productModel for a specific node.</p> |SNMP |fas3220.cluster[nodeModel, "{#NODE.NAME}"]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `6h`</p> |
|NetApp FAS3220 |Node {#NODE.NAME}: Serial number |<p>Node Serial Number. Same as productSerialNum for a specific node.</p> |SNMP |fas3220.cluster[nodeSerialNumber, "{#NODE.NAME}"]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `6h`</p> |
|NetApp FAS3220 |Node {#NODE.NAME}: Uptime |<p>Node uptime. Same as sysUpTime for a specific node.</p> |SNMP |fas3220.cluster[nodeUptime, "{#NODE.NAME}"]<p>**Preprocessing**:</p><p>- MULTIPLIER: `0.01`</p> |
|NetApp FAS3220 |Node {#NODE.NAME}: Health |<p>Whether or not the node can communicate with the cluster.</p> |SNMP |fas3220.cluster[nodeHealth, "{#NODE.NAME}"]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `6h`</p> |
|NetApp FAS3220 |Node {#NODE.NAME}: NVRAM battery status |<p>An indication of the current status of the NVRAM battery or batteries.</p><p>Batteries which are fully or partially discharged may not fully protect the system during a crash. The end-of-life status values are based on the manufacturer's recommended life for the batteries.</p><p>Possible values:</p><p>ok(1),</p><p>partiallyDischarged(2),</p><p>fullyDischarged(3),</p><p>notPresent(4),</p><p>nearEndOfLife(5),</p><p>atEndOfLife(6),</p><p>unknown(7),</p><p>overCharged(8),</p><p>fullyCharged(9).</p> |SNMP |fas3220.cluster[nodeNvramBatteryStatus, "{#NODE.NAME}"]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `6h`</p> |
|NetApp FAS3220 |Node {#NODE.NAME}: Over-temperature |<p>An indication of whether the hardware is currently operating outside of its recommended temperature range. The hardware will shutdown if the temperature exceeds critical thresholds.</p> |SNMP |fas3220.cluster[nodeEnvOverTemperature, "{#NODE.NAME}"]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `6h`</p> |
|NetApp FAS3220 |Node {#NODE.NAME}: Failed FAN count |<p>Count of the number of chassis fans that are not operating within the recommended RPM range.</p> |SNMP |fas3220.cluster[nodeEnvFailedFanCount, "{#NODE.NAME}"]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `6h`</p> |
|NetApp FAS3220 |Node {#NODE.NAME}: Failed FAN message |<p>Text message describing current condition of chassis fans. This is useful only if envFailedFanCount is not zero.</p> |SNMP |fas3220.cluster[nodeEnvFailedFanMessage, "{#NODE.NAME}"]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `6h`</p> |
|NetApp FAS3220 |Node {#NODE.NAME}: Degraded power supplies count |<p>Count of the number of power supplies that are in degraded mode.</p> |SNMP |fas3220.cluster[nodeEnvFailedPowerSupplyCount, "{#NODE.NAME}"]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `6h`</p> |
|NetApp FAS3220 |Node {#NODE.NAME}: Degraded power supplies message |<p>Text message describing the state of any power supplies that are currently degraded. This is useful only if envFailedPowerSupplyCount is not zero.</p> |SNMP |fas3220.cluster[nodeEnvFailedPowerSupplyMessage, "{#NODE.NAME}"]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `6h`</p> |
|NetApp FAS3220 |Node {#NODE.NAME}: Cannot takeover cause |<p>The reason node cannot take over it's HA partner {#PARTNER.NAME}.</p><p>Possible states:</p><p> ok(1),</p><p> unknownReason(2),</p><p> disabledByOperator(3),</p><p> interconnectOffline(4),</p><p> disabledByPartner(5),</p><p> takeoverFailed(6),</p><p> mailboxIsInDegradedState(7),</p><p> partnermailboxIsInUninitialisedState(8),</p><p> mailboxVersionMismatch(9),</p><p> nvramSizeMismatch(10),</p><p> kernelVersionMismatch(11),</p><p> partnerIsInBootingStage(12),</p><p> diskshelfIsTooHot(13),</p><p> partnerIsPerformingRevert(14),</p><p> nodeIsPerformingRevert(15),</p><p> sametimePartnerIsAlsoTryingToTakeUsOver(16),</p><p> alreadyInTakenoverMode(17),</p><p> nvramLogUnsynchronized(18),</p><p> stateofBackupMailboxIsDoubtful(19).</p> |SNMP |fas3220.ha[haCannotTakeoverCause, "{#NODE.NAME}"]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `6h`</p> |
|NetApp FAS3220 |Node {#NODE.NAME}: HA settings |<p>High Availability configuration settings. The value notConfigured(1) indicates that the HA is not licensed. The thisNodeDead(5) setting indicates that this node has been takenover.</p> |SNMP |fas3220.ha[haSettings, "{#NODE.NAME}"]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `6h`</p> |
|NetApp FAS3220 |{#VSERVER}{#FSNAME}: Total space used |<p>The total disk space that is in use on {#FSNAME}.</p> |SNMP |fas3220.fs[df64UsedKBytes, "{#VSERVER}{#FSNAME}"]<p>**Preprocessing**:</p><p>- MULTIPLIER: `1024`</p> |
|NetApp FAS3220 |{#VSERVER}{#FSNAME}: Total space available |<p>The total disk space that is free for use on {#FSNAME}.</p> |SNMP |fas3220.fs[df64AvailKBytes, "{#VSERVER}{#FSNAME}"]<p>**Preprocessing**:</p><p>- MULTIPLIER: `1024`</p> |
|NetApp FAS3220 |{#VSERVER}{#FSNAME}: Total space |<p>The total capacity in Bytes for {#FSNAME}.</p> |SNMP |fas3220.fs[df64TotalKBytes, "{#VSERVER}{#FSNAME}"]<p>**Preprocessing**:</p><p>- MULTIPLIER: `1024`</p> |
|NetApp FAS3220 |{#VSERVER}{#FSNAME}: Used space percents |<p>The percentage of disk space currently in use on {#FSNAME}.</p> |SNMP |fas3220.fs[dfPerCentKBytesCapacity, "{#VSERVER}{#FSNAME}"] |
|NetApp FAS3220 |{#VSERVER}{#FSNAME}: Saved by compression percents |<p>Provides the percentage of compression savings in a volume, which is ((compr_saved/used)) * 10(compr_saved + 0). This is only returned for volumes.</p> |SNMP |fas3220.fs[dfCompressSavedPercent, "{#VSERVER}{#FSNAME}"] |
|NetApp FAS3220 |{#VSERVER}{#FSNAME}: Saved by deduplication percents |<p>Provides the percentage of deduplication savings in a volume, which is ((dedup_saved/(dedup_saved + used)) * 100). This is only returned for volumes.</p> |SNMP |fas3220.fs[dfDedupeSavedPercent, "{#VSERVER}{#FSNAME}"] |
|NetApp FAS3220 |Node {#NODE}: port {#IFNAME} ({#TYPE}): Up by an administrator |<p>Indicates whether the port status is set 'UP' by an administrator.</p> |SNMP |fas3220.net.port[netportUpAdmin, "{#NODE}", "{#IFNAME}"]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `6h`</p> |
|NetApp FAS3220 |Node {#NODE}: port {#IFNAME} ({#TYPE}): Role |<p>Role of the port. A port must have one of the following roles: cluster(1), data(2), mgmt(3), intercluster(4), cluster-mgmt(5) or undef(0). The cluster port is used to communicate to other node(s) in the cluster. The data port services clients' requests. It is where all the file requests come in. The management port is used by administrator to manage resources within a node. The intercluster port is used to communicate to other cluster. The cluster-mgmt port is used to manage resources within the cluster. The undef role is for the port that has not yet been assigned a role.</p> |SNMP |fas3220.net.port[netportRole, "{#NODE}", "{#IFNAME}"]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `6h`</p> |
|NetApp FAS3220 |Node {#NODE}: port {#IFNAME} ({#TYPE}): Speed |<p>The speed appears on the port. It can be either undef(0), auto(1), ten Mb/s(2), hundred Mb/s(3), one Gb/s(4), or ten Gb/s(5).</p> |SNMP |fas3220.net.port[netportSpeedOper, "{#NODE}", "{#IFNAME}"]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `6h`</p> |
|NetApp FAS3220 |Node {#NODE}: port {#IFNAME} ({#TYPE}): Bits received |<p>The total number of octets received on the interface, including framing characters.</p> |SNMP |fas3220.net.if[if64InOctets, "{#NODE}", "{#IFNAME}"]<p>**Preprocessing**:</p><p>- MULTIPLIER: `8`</p><p>- CHANGE_PER_SECOND</p> |
|NetApp FAS3220 |Node {#NODE}: port {#IFNAME} ({#TYPE}): Bits sent |<p>The total number of octets transmitted out of the interface, including framing characters.</p> |SNMP |fas3220.net.if[if64OutOctets, "{#NODE}", "{#IFNAME}"]<p>**Preprocessing**:</p><p>- MULTIPLIER: `8`</p><p>- CHANGE_PER_SECOND</p> |
|NetApp FAS3220 |Node {#NODE}: port {#IFNAME} ({#TYPE}): State |<p>The link-state of the port. Normally it is either UP(2) or DOWN(3).</p> |SNMP |fas3220.net.port[netportLinkState, "{#NODE}", "{#IFNAME}"]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `6h`</p> |
|NetApp FAS3220 |Node {#NODE}: port {#IFNAME} ({#TYPE}): Health |<p>The health status of the port.</p> |SNMP |fas3220.net.port[netportHealthStatus, "{#NODE}", "{#IFNAME}"]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `6h`</p> |
|NetApp FAS3220 |Node {#NODE}: port {#IFNAME} ({#TYPE}): Health degraded reason |<p>The list of reasons why the port is marked as degraded.</p> |SNMP |fas3220.net.port[netportDegradedReason, "{#NODE}", "{#IFNAME}"]<p>**Preprocessing**:</p><p>- DISCARD_UNCHANGED_HEARTBEAT: `6h`</p> |
|Network interfaces |Node {#NODE}: port {#IFNAME} ({#TYPE}): Inbound packets with errors |<p>MIB: IF-MIB</p><p>The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.</p> |SNMP |fas3220.net.if[if64InErrors, "{#NODE}", "{#IFNAME}"]<p>**Preprocessing**:</p><p>- CHANGE_PER_SECOND</p> |
|Network interfaces |Node {#NODE}: port {#IFNAME} ({#TYPE}): Outbound packets with errors |<p>MIB: IF-MIB</p><p>The number of outbound packets that could not be transmitted because of errors.</p> |SNMP |fas3220.net.if[if64OutErrors, "{#NODE}", "{#IFNAME}"]<p>**Preprocessing**:</p><p>- CHANGE_PER_SECOND</p> |
|Network interfaces |Node {#NODE}: port {#IFNAME} ({#TYPE}): Inbound packets discarded |<p>MIB: IF-MIB</p><p>The number of inbound packets that were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.</p> |SNMP |fas3220.net.if[if64InDiscards, "{#NODE}", "{#IFNAME}"]<p>**Preprocessing**:</p><p>- CHANGE_PER_SECOND</p> |
|Network interfaces |Node {#NODE}: port {#IFNAME} ({#TYPE}): Outbound packets discarded |<p>MIB: IF-MIB</p><p>The number of outbound packets that were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.</p> |SNMP |fas3220.net.if[if64OutDiscards, "{#NODE}", "{#IFNAME}"]<p>**Preprocessing**:</p><p>- CHANGE_PER_SECOND</p> |
|Status |Uptime (network) |<p>MIB: SNMPv2-MIB</p><p>The time (in hundredths of a second) since the network management portion of the system was last re-initialized.</p> |SNMP |system.net.uptime[sysUpTime.0]<p>**Preprocessing**:</p><p>- MULTIPLIER: `0.01`</p> |
|Status |Uptime (hardware) |<p>MIB: HOST-RESOURCES-MIB</p><p>The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime of the network management portion of the system.</p> |SNMP |system.hw.uptime[hrSystemUptime.0]<p>**Preprocessing**:</p><p>- CHECK_NOT_SUPPORTED</p><p>⛔️ON_FAIL: `CUSTOM_VALUE -> 0`</p><p>- MULTIPLIER: `0.01`</p> |
|Status |SNMP agent availability |<p>Availability of SNMP checks on the host. The value of this item corresponds to availability icons in the host list.</p><p>Possible value:</p><p>0 - not available</p><p>1 - available</p><p>2 - unknown</p> |INTERNAL |zabbix[host,snmp,available] |
|Status |ICMP ping |<p>-</p> |SIMPLE |icmpping |
|Status |ICMP loss |<p>-</p> |SIMPLE |icmppingloss |
|Status |ICMP response time |<p>-</p> |SIMPLE |icmppingsec |
## Triggers
|Name|Description|Expression|Severity|Dependencies and additional info|
|----|-----------|----|----|----|
|Node {#NODE.NAME}: High CPU utilization |<p>CPU utilization is too high. The system might be slow to respond.</p> |`min(/NetApp FAS3220 by SNMP/fas3220.cpu[cDOTCpuBusyTimePerCent, "{#NODE.NAME}"],5m)>{$CPU.UTIL.CRIT}` |WARNING | |
|System name has changed |<p>System name has changed. Ack to close.</p> |`last(/NetApp FAS3220 by SNMP/system.name,#1)<>last(/NetApp FAS3220 by SNMP/system.name,#2) and length(last(/NetApp FAS3220 by SNMP/system.name))>0` |INFO |<p>Manual close: YES</p> |
|NetApp FAS3220: Number of failed disks has changed |<p>{{ITEM.LASTVALUE2}.regsub("(.*)", \1)}</p> |`last(/NetApp FAS3220 by SNMP/fas3220.disk[diskFailedCount])>0 and last(/NetApp FAS3220 by SNMP/fas3220.disk[diskFailedMessage],#1)<>last(/NetApp FAS3220 by SNMP/fas3220.disk[diskFailedMessage],#2)`<p>Recovery expression:</p>`last(/NetApp FAS3220 by SNMP/fas3220.disk[diskFailedCount])=0` |WARNING | |
|Node {#NODE.NAME}: Host has been restarted |<p>Uptime is less than 10 minutes.</p> |`last(/NetApp FAS3220 by SNMP/fas3220.cluster[nodeUptime, "{#NODE.NAME}"])<10m` |INFO |<p>Manual close: YES</p> |
|Node {#NODE.NAME}: Node can not communicate with the cluster |<p>-</p> |`last(/NetApp FAS3220 by SNMP/fas3220.cluster[nodeHealth, "{#NODE.NAME}"])=0` |HIGH |<p>Manual close: YES</p> |
|Node {#NODE.NAME}: NVRAM battery status is not OK |<p>-</p> |`last(/NetApp FAS3220 by SNMP/fas3220.cluster[nodeNvramBatteryStatus, "{#NODE.NAME}"])<>1` |AVERAGE |<p>Manual close: YES</p> |
|Node {#NODE.NAME}: Temperature is over than recommended |<p>The hardware will shutdown if the temperature exceeds critical thresholds.</p> |`last(/NetApp FAS3220 by SNMP/fas3220.cluster[nodeEnvOverTemperature, "{#NODE.NAME}"])=2` |HIGH | |
|Node {#NODE.NAME}: Failed FAN count is over than zero |<p>{{ITEM.VALUE2}.regsub("(.*)", \1)}</p> |`last(/NetApp FAS3220 by SNMP/fas3220.cluster[nodeEnvFailedFanCount, "{#NODE.NAME}"])>0 and last(/NetApp FAS3220 by SNMP/fas3220.cluster[nodeEnvFailedFanMessage, "{#NODE.NAME}"])=last(/NetApp FAS3220 by SNMP/fas3220.cluster[nodeEnvFailedFanMessage, "{#NODE.NAME}"])` |HIGH | |
|Node {#NODE.NAME}: Degraded power supplies count is more than zero |<p>{{ITEM.VALUE2}.regsub("(.*)", \1)}</p> |`last(/NetApp FAS3220 by SNMP/fas3220.cluster[nodeEnvFailedPowerSupplyCount, "{#NODE.NAME}"])>0 and last(/NetApp FAS3220 by SNMP/fas3220.cluster[nodeEnvFailedPowerSupplyMessage, "{#NODE.NAME}"])=last(/NetApp FAS3220 by SNMP/fas3220.cluster[nodeEnvFailedPowerSupplyMessage, "{#NODE.NAME}"])` |AVERAGE | |
|Node {#NODE.NAME}: Node cannot takeover it's HA partner {#PARTNER.NAME}. Reason: {ITEM.VALUE} |<p>Possible reasons:</p><p> unknownReason(2),</p><p> disabledByOperator(3),</p><p> interconnectOffline(4),</p><p> disabledByPartner(5),</p><p> takeoverFailed(6),</p><p> mailboxIsInDegradedState(7),</p><p> partnermailboxIsInUninitialisedState(8),</p><p> mailboxVersionMismatch(9),</p><p> nvramSizeMismatch(10),</p><p> kernelVersionMismatch(11),</p><p> partnerIsInBootingStage(12),</p><p> diskshelfIsTooHot(13),</p><p> partnerIsPerformingRevert(14),</p><p> nodeIsPerformingRevert(15),</p><p> sametimePartnerIsAlsoTryingToTakeUsOver(16),</p><p> alreadyInTakenoverMode(17),</p><p> nvramLogUnsynchronized(18),</p><p> stateofBackupMailboxIsDoubtful(19).</p> |`last(/NetApp FAS3220 by SNMP/fas3220.ha[haCannotTakeoverCause, "{#NODE.NAME}"])<>1` |HIGH | |
|Node {#NODE.NAME}: Node has been taken over |<p>The thisNodeDead(5) setting indicates that this node has been takenover.</p> |`last(/NetApp FAS3220 by SNMP/fas3220.ha[haSettings, "{#NODE.NAME}"])=5` |HIGH | |
|Node {#NODE.NAME}: HA is not licensed |<p>The value notConfigured(1) indicates that the HA is not licensed.</p> |`last(/NetApp FAS3220 by SNMP/fas3220.ha[haSettings, "{#NODE.NAME}"])=1` |AVERAGE | |
|{#VSERVER}{#FSNAME}: Disk space is too low |<p>-</p> |`min(/NetApp FAS3220 by SNMP/fas3220.fs[df64AvailKBytes, "{#VSERVER}{#FSNAME}"],{$FAS3220.FS.TIME:"{#FSNAME}"})<{$FAS3220.FS.AVAIL.MIN.CRIT:"{#FSNAME}"} and {$FAS3220.FS.USE.PCT:"{#FSNAME}"}=0` |HIGH | |
|{#VSERVER}{#FSNAME}: Disk space is too low |<p>-</p> |`max(/NetApp FAS3220 by SNMP/fas3220.fs[dfPerCentKBytesCapacity, "{#VSERVER}{#FSNAME}"],{$FAS3220.FS.TIME:"{#FSNAME}"})>{$FAS3220.FS.PUSED.MAX.CRIT:"{#FSNAME}"} and {$FAS3220.FS.USE.PCT:"{#FSNAME}"}=1` |HIGH | |
|Node {#NODE}: port {#IFNAME} ({#TYPE}): Link down |<p>Link state is not UP and the port status is set 'UP' by an administrator.</p> |`last(/NetApp FAS3220 by SNMP/fas3220.net.port[netportLinkState, "{#NODE}", "{#IFNAME}"])<>2 and last(/NetApp FAS3220 by SNMP/fas3220.net.port[netportUpAdmin, "{#NODE}", "{#IFNAME}"])=1` |AVERAGE |<p>Manual close: YES</p> |
|Node {#NODE}: port {#IFNAME} ({#TYPE}): Port is not healthy |<p>{{ITEM.LASTVALUE2}.regsub("(.*)", \1)}</p> |`last(/NetApp FAS3220 by SNMP/fas3220.net.port[netportHealthStatus, "{#NODE}", "{#IFNAME}"])<>0 and length(last(/NetApp FAS3220 by SNMP/fas3220.net.port[netportDegradedReason, "{#NODE}", "{#IFNAME}"]))>0` |INFO | |
|Node {#NODE}: port {#IFNAME} ({#TYPE}): High error rate |<p>Recovers when below 80% of {$IF.ERRORS.WARN:"{#IFNAME}"} threshold</p> |`min(/NetApp FAS3220 by SNMP/fas3220.net.if[if64InErrors, "{#NODE}", "{#IFNAME}"],5m)>{$IF.ERRORS.WARN:"{#IFNAME}"} or min(/NetApp FAS3220 by SNMP/fas3220.net.if[if64OutErrors, "{#NODE}", "{#IFNAME}"],5m)>{$IF.ERRORS.WARN:"{#IFNAME}"} `<p>Recovery expression:</p>`max(/NetApp FAS3220 by SNMP/fas3220.net.if[if64InErrors, "{#NODE}", "{#IFNAME}"],5m)<{$IF.ERRORS.WARN:"{#IFNAME}"}*0.8 and max(/NetApp FAS3220 by SNMP/fas3220.net.if[if64OutErrors, "{#NODE}", "{#IFNAME}"],5m)<{$IF.ERRORS.WARN:"{#IFNAME}"}*0.8 ` |WARNING |<p>Manual close: YES</p> |
|Host has been restarted |<p>Uptime is less than 10 minutes.</p> |`(last(/NetApp FAS3220 by SNMP/system.hw.uptime[hrSystemUptime.0])>0 and last(/NetApp FAS3220 by SNMP/system.hw.uptime[hrSystemUptime.0])<10m) or (last(/NetApp FAS3220 by SNMP/system.hw.uptime[hrSystemUptime.0])=0 and last(/NetApp FAS3220 by SNMP/system.net.uptime[sysUpTime.0])<10m)` |WARNING |<p>Manual close: YES</p><p>**Depends on**:</p><p>- No SNMP data collection</p> |
|No SNMP data collection |<p>SNMP is not available for polling. Please check device connectivity and SNMP settings.</p> |`max(/NetApp FAS3220 by SNMP/zabbix[host,snmp,available],{$SNMP.TIMEOUT})=0` |WARNING |<p>**Depends on**:</p><p>- Unavailable by ICMP ping</p> |
|Unavailable by ICMP ping |<p>Last three attempts returned timeout. Please check device connectivity.</p> |`max(/NetApp FAS3220 by SNMP/icmpping,#3)=0` |HIGH | |
|High ICMP ping loss |<p>-</p> |`min(/NetApp FAS3220 by SNMP/icmppingloss,5m)>{$ICMP_LOSS_WARN} and min(/NetApp FAS3220 by SNMP/icmppingloss,5m)<100` |WARNING |<p>**Depends on**:</p><p>- Unavailable by ICMP ping</p> |
|High ICMP ping response time |<p>-</p> |`avg(/NetApp FAS3220 by SNMP/icmppingsec,5m)>{$ICMP_RESPONSE_TIME_WARN}` |WARNING |<p>**Depends on**:</p><p>- High ICMP ping loss</p><p>- Unavailable by ICMP ping</p> |
## Feedback
Please report any issues with the template at https://support.zabbix.com.
You can also provide feedback, discuss the template, or ask for help at [ZABBIX forums](https://www.zabbix.com/forum/zabbix-suggestions-and-feedback/416694-discussion-thread-for-official-zabbix-template-netapp-fas3220).
|
