Add latest changes from gitlab-org/gitlab@master

26 files changed, 38 insertions, 42 deletions

diff --git a/doc/administration/gitaly/index.md b/doc/administration/gitaly/index.md
index 4d60832720b..3bb88c56934 100644
--- a/doc/administration/gitaly/index.md
+++ b/doc/administration/gitaly/index.md
@@ -290,7 +290,7 @@ including [horizontally distributing reads](https://gitlab.com/groups/gitlab-org
 
 #### Distributed reads
 
-> - Introduced in GitLab 13.1 in [beta](https://about.gitlab.com/handbook/product/gitlab-the-product/#alpha-beta-ga) with feature flag `gitaly_distributed_reads` set to disabled.
+> - Introduced in GitLab 13.1 in [beta](../../policy/alpha-beta-support.md#beta-features) with feature flag `gitaly_distributed_reads` set to disabled.
 > - [Made generally available and enabled by default](https://gitlab.com/gitlab-org/gitaly/-/issues/2951) in GitLab 13.3.
 > - [Disabled by default](https://gitlab.com/gitlab-org/gitaly/-/issues/3178) in GitLab 13.5.
 > - [Enabled by default](https://gitlab.com/gitlab-org/gitaly/-/issues/3334) in GitLab 13.8.
@@ -316,8 +316,8 @@ You can [monitor distribution of reads](#monitor-gitaly-cluster) using Prometheu
 
 #### Strong consistency
 
-> - Introduced in GitLab 13.1 in [alpha](https://about.gitlab.com/handbook/product/gitlab-the-product/#alpha-beta-ga), disabled by default.
-> - Entered [beta](https://about.gitlab.com/handbook/product/gitlab-the-product/#alpha-beta-ga) in GitLab 13.2, disabled by default.
+> - Introduced in GitLab 13.1 in [alpha](../../policy/alpha-beta-support.md#alpha-features), disabled by default.
+> - Entered [beta](../../policy/alpha-beta-support.md#beta-features) in GitLab 13.2, disabled by default.
 > - In GitLab 13.3, disabled unless primary-wins voting strategy is disabled.
 > - From GitLab 13.4, enabled by default.
 > - From GitLab 13.5, you must use Git v2.28.0 or higher on Gitaly nodes to enable strong consistency.
diff --git a/doc/administration/gitaly/recovery.md b/doc/administration/gitaly/recovery.md
index e1b9a73908d..9210c8f08d3 100644
--- a/doc/administration/gitaly/recovery.md
+++ b/doc/administration/gitaly/recovery.md
@@ -28,7 +28,7 @@ To minimize data loss in GitLab 13.0 to 14.0, Gitaly Cluster:
 
 ### Read-only mode
 
-> - Introduced in GitLab 13.0 as [generally available](https://about.gitlab.com/handbook/product/gitlab-the-product/#generally-available-ga).
+> - Introduced in GitLab 13.0 as [generally available](../../policy/alpha-beta-support.md#generally-available-ga).
 > - Between GitLab 13.0 and GitLab 13.2, read-only mode applied to the whole virtual storage and occurred whenever failover occurred.
 > - [In GitLab 13.3 and later](https://gitlab.com/gitlab-org/gitaly/-/issues/2862), read-only mode applies on a per-repository basis and only occurs if a new primary is out of date.
 new primary. If the failed primary contained unreplicated writes, [data loss can occur](#check-for-data-loss).
diff --git a/doc/administration/operations/fast_ssh_key_lookup.md b/doc/administration/operations/fast_ssh_key_lookup.md
index acb2df18e65..dca99879cc3 100644
--- a/doc/administration/operations/fast_ssh_key_lookup.md
+++ b/doc/administration/operations/fast_ssh_key_lookup.md
@@ -138,7 +138,7 @@ This is a brief overview. Please refer to the above instructions for more contex
 > [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/299109) in GitLab 14.5.
 
 WARNING:
-`gitlab-sshd` is in [**Alpha**](https://about.gitlab.com/handbook/product/gitlab-the-product/#alpha-beta-ga).
+`gitlab-sshd` is in [**Alpha**](../../policy/alpha-beta-support.md#alpha-features).
 It is not ready for production use.
 
 `gitlab-sshd` is [a standalone SSH server](https://gitlab.com/gitlab-org/gitlab-shell/-/tree/main/internal/sshd)
diff --git a/doc/administration/pages/index.md b/doc/administration/pages/index.md
index 81465e0228c..efb080f5441 100644
--- a/doc/administration/pages/index.md
+++ b/doc/administration/pages/index.md
@@ -238,7 +238,7 @@ control over how the Pages daemon runs and serves content in your environment.
 | `artifacts_server_url`                  | API URL to proxy artifact requests to. Defaults to GitLab `external URL` + `/api/v4`, for example `https://gitlab.com/api/v4`. When running a [separate Pages server](#running-gitlab-pages-on-a-separate-server), this URL must point to the main GitLab server's API. |
 | `auth_redirect_uri`                     | Callback URL for authenticating with GitLab. Defaults to project's subdomain of `pages_external_url` + `/auth`. |
 | `auth_secret`                           | Secret key for signing authentication requests. Leave blank to pull automatically from GitLab during OAuth registration. |
-| `client_cert_key_pairs`                 | Client certificates and keys used for mutual TLS with the GitLab API. See [Support mutual TLS when calling the GitLab API](#support-mutual-tls-when-calling-the-gitlab-api) for details. |
+| `client_cert_key_pairs`                 | Client certificates and keys used for mutual TLS with the GitLab API. See [Support mutual TLS when calling the GitLab API](#support-mutual-tls-when-calling-the-gitlab-api) for details. [Introduced](https://gitlab.com/gitlab-org/gitlab-pages/-/issues/548) in GitLab 14.8. |
 | `dir`                                   | Working directory for configuration and secrets files. |
 | `enable`                                | Enable or disable GitLab Pages on the current system. |
 | `external_http`                         | Configure Pages to bind to one or more secondary IP addresses, serving HTTP requests. Multiple addresses can be given as an array, along with exact ports, for example `['1.2.3.4', '1.2.3.5:8063']`. Sets value for `listen_http`. |
@@ -514,6 +514,8 @@ For Omnibus, this is fixed by [installing a custom CA in Omnibus GitLab](https:/
 
 ### Support mutual TLS when calling the GitLab API
 
+> [Introduced](https://gitlab.com/gitlab-org/gitlab-pages/-/issues/548) in GitLab 14.8.
+
 If GitLab has been [configured to require mutual TLS](https://docs.gitlab.com/omnibus/settings/nginx.html#enable-2-way-ssl-client-authentication), you need to add the client certificates to Pages:
 
 1. Configure in `/etc/gitlab/gitlab.rb`:
diff --git a/doc/api/project_import_export.md b/doc/api/project_import_export.md
index 8e7607adf9b..6e9e9f0a81f 100644
--- a/doc/api/project_import_export.md
+++ b/doc/api/project_import_export.md
@@ -188,7 +188,7 @@ As an administrator, you can modify the maximum import file size. To do so, use
 
 ## Import a file from a remote object storage
 
-> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/282503) in GitLab 13.12 in [Beta](https://about.gitlab.com/handbook/product/gitlab-the-product/#beta).
+> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/282503) in GitLab 13.12 in [Beta](../policy/alpha-beta-support.md#beta-features).
 
 This endpoint is behind a feature flag that is enabled by default.
 
diff --git a/doc/ci/cloud_services/google_cloud/index.md b/doc/ci/cloud_services/google_cloud/index.md
index aa48c971dc6..14928f91816 100644
--- a/doc/ci/cloud_services/google_cloud/index.md
+++ b/doc/ci/cloud_services/google_cloud/index.md
@@ -7,7 +7,7 @@ info: To determine the technical writer assigned to the Stage/Group associated w
 # Configure OpenID Connect with GCP Workload Identity Federation
 
 WARNING:
-The `CI_JOB_JWT_V2` variable is under development [(alpha)](https://about.gitlab.com/handbook/product/gitlab-the-product/#alpha) and is not yet suitable for production use.
+The `CI_JOB_JWT_V2` variable is under development [(alpha)](../../../policy/alpha-beta-support.md#alpha-features) and is not yet suitable for production use.
 
 This tutorial demonstrates authenticating to Google Cloud from a GitLab CI/CD job
 using a JSON Web Token (JWT) token and Workload Identity Federation. This configuration
diff --git a/doc/ci/cloud_services/index.md b/doc/ci/cloud_services/index.md
index 43425333ce4..a0395730680 100644
--- a/doc/ci/cloud_services/index.md
+++ b/doc/ci/cloud_services/index.md
@@ -19,7 +19,7 @@ GitLab CI/CD supports [OpenID Connect (OIDC)](https://openid.net/connect/faq/) t
 The original implementation of `CI_JOB_JWT` supports [HashiCorp Vault integration](../examples/authenticating-with-hashicorp-vault/). The updated implementation of `CI_JOB_JWT_V2` supports additional cloud providers with OIDC including AWS, GCP, and Vault.
 
 WARNING:
-The `CI_JOB_JWT_V2` variable is under development [(alpha)](https://about.gitlab.com/handbook/product/gitlab-the-product/#alpha) and is not yet suitable for production use.
+The `CI_JOB_JWT_V2` variable is under development [(alpha)](../../policy/alpha-beta-support.md#alpha-features) and is not yet suitable for production use.
 
 ## Use cases
 
diff --git a/doc/ci/runners/saas/macos_saas_runner.md b/doc/ci/runners/saas/macos_saas_runner.md
index 40c4deb51aa..bfe408f4485 100644
--- a/doc/ci/runners/saas/macos_saas_runner.md
+++ b/doc/ci/runners/saas/macos_saas_runner.md
@@ -12,7 +12,7 @@ Use these runners to build, test, and deploy apps for the Apple ecosystem (macOS
 of all the capabilities of the GitLab single DevOps platform and not have to manage or operate a
 build environment.
 
-SaaS runners on macOS are in [Beta](https://about.gitlab.com/handbook/product/gitlab-the-product/#beta)
+SaaS runners on macOS are in [Beta](../../../policy/alpha-beta-support.md#beta-features)
 and shouldn't be relied upon for mission-critical production jobs.
 
 ## Quickstart
diff --git a/doc/ci/runners/saas/windows_saas_runner.md b/doc/ci/runners/saas/windows_saas_runner.md
index 209c43e1e7f..dddb3afee7c 100644
--- a/doc/ci/runners/saas/windows_saas_runner.md
+++ b/doc/ci/runners/saas/windows_saas_runner.md
@@ -6,7 +6,7 @@ info: To determine the technical writer assigned to the Stage/Group associated w
 
 # SaaS runners on Windows (beta) **(FREE SAAS)**
 
-SaaS runners on Windows are in [beta](https://about.gitlab.com/handbook/product/gitlab-the-product/#beta)
+SaaS runners on Windows are in [beta](../../../policy/alpha-beta-support.md#beta-features)
 and shouldn't be used for production workloads.
 
 During this beta period, the [shared runner quota for CI/CD minutes](../../pipelines/cicd_minutes.md)
@@ -22,7 +22,7 @@ Windows runners execute your CI/CD jobs on `n1-standard-2` instances with
 the [package documentation](https://gitlab.com/gitlab-org/ci-cd/shared-runners/images/gcp/windows-containers/blob/main/cookbooks/preinstalled-software/README.md).
 
 We want to keep iterating to get Windows runners in a stable state and
-[generally available](https://about.gitlab.com/handbook/product/gitlab-the-product/#generally-available-ga).
+[generally available](../../../policy/alpha-beta-support.md#generally-available-ga).
 You can follow our work towards this goal in the
 [related epic](https://gitlab.com/groups/gitlab-org/-/epics/2162).
 
@@ -127,7 +127,7 @@ test:
 ## Limitations and known issues
 
 - All the limitations mentioned in our [beta
-  definition](https://about.gitlab.com/handbook/product/#beta).
+  definition](../../../policy/alpha-beta-support.md#beta-features).
 - The average provisioning time for a new Windows VM is 5 minutes.
   This means that you may notice slower build start times
   on the Windows runner fleet during the beta. In a future
diff --git a/doc/ci/variables/predefined_variables.md b/doc/ci/variables/predefined_variables.md
index 2a220908ee1..0f3461b3674 100644
--- a/doc/ci/variables/predefined_variables.md
+++ b/doc/ci/variables/predefined_variables.md
@@ -63,7 +63,7 @@ There are also a number of [variables you can use to configure runner behavior](
 | `CI_JOB_IMAGE`                           | 12.9   | 12.9   | The name of the Docker image running the job. |
 | `CI_JOB_JWT`                             | 12.10  | all    | A RS256 JSON web token to authenticate with third party systems that support JWT authentication, for example [HashiCorp's Vault](../secrets/index.md). |
 | `CI_JOB_JWT_V1`                          | 14.6   | all    | The same value as `CI_JOB_JWT`. |
-| `CI_JOB_JWT_V2`                          | 14.6   | all    | [**alpha:**](https://about.gitlab.com/handbook/product/gitlab-the-product/#alpha-beta-ga) A newly formatted RS256 JSON web token to increase compatibility. Similar to `CI_JOB_JWT`, except the issuer (`iss`) claim is changed from `gitlab.com` to `https://gitlab.com`, `sub` has changed from `job_id` to a string that contains the project path, and an `aud` claim is added. Format is subject to change. Be aware, the `aud` field is a constant value. Trusting JWTs in multiple relying parties can lead to [one RP sending a JWT to another one and acting maliciously as a job](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/72555#note_769112331).  |
+| `CI_JOB_JWT_V2`                          | 14.6   | all    | [**alpha:**](../../policy/alpha-beta-support.md#alpha-features) A newly formatted RS256 JSON web token to increase compatibility. Similar to `CI_JOB_JWT`, except the issuer (`iss`) claim is changed from `gitlab.com` to `https://gitlab.com`, `sub` has changed from `job_id` to a string that contains the project path, and an `aud` claim is added. Format is subject to change. Be aware, the `aud` field is a constant value. Trusting JWTs in multiple relying parties can lead to [one RP sending a JWT to another one and acting maliciously as a job](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/72555#note_769112331).  |
 | `CI_JOB_MANUAL`                          | 8.12   | all    | `true` if a job was started manually. |
 | `CI_JOB_NAME`                            | 9.0    | 0.5    | The name of the job. |
 | `CI_JOB_STAGE`                           | 9.0    | 0.5    | The name of the job's stage. |
diff --git a/doc/development/contributing/design.md b/doc/development/contributing/design.md
index e85f5dd8349..efa8d4b0c41 100644
--- a/doc/development/contributing/design.md
+++ b/doc/development/contributing/design.md
@@ -60,7 +60,7 @@ Check visual design properties using your browser's _elements inspector_ ([Chrom
   guidelines.
 - _Optionally_ consider [dark mode](../../user/profile/preferences.md#dark-mode). [^1]
 
- [^1]: You're not required to design for [dark mode](../../user/profile/preferences.md#dark-mode) while the feature is in [alpha](https://about.gitlab.com/handbook/product/gitlab-the-product/#alpha). The [UX Foundations team](https://about.gitlab.com/direction/ecosystem/foundations/) plans to improve the dark mode in the future. Until we integrate [Pajamas](https://design.gitlab.com/) components into the product and the underlying design strategy is in place to support dark mode, we cannot guarantee that we won't introduce bugs and debt to this mode. At your discretion, evaluate the need to create dark mode patches.
+ [^1]: You're not required to design for [dark mode](../../user/profile/preferences.md#dark-mode) while the feature is in [alpha](../../policy/alpha-beta-support.md#alpha-features). The [UX Foundations team](https://about.gitlab.com/direction/ecosystem/foundations/) plans to improve the dark mode in the future. Until we integrate [Pajamas](https://design.gitlab.com/) components into the product and the underlying design strategy is in place to support dark mode, we cannot guarantee that we won't introduce bugs and debt to this mode. At your discretion, evaluate the need to create dark mode patches.
 
 ### States
 
diff --git a/doc/development/documentation/styleguide/word_list.md b/doc/development/documentation/styleguide/word_list.md
index ff597f1ca8f..b5b05402918 100644
--- a/doc/development/documentation/styleguide/word_list.md
+++ b/doc/development/documentation/styleguide/word_list.md
@@ -98,7 +98,7 @@ This phrasing is more active and is from the user perspective, rather than the p
 
 Use uppercase for **Alpha**. For example: **The XYZ feature is in Alpha.** or **This Alpha release is ready to test.**
 
-You might also want to link to [this section](https://about.gitlab.com/handbook/product/gitlab-the-product/#alpha-beta-ga)
+You might also want to link to [this section](../../../policy/alpha-beta-support.md#alpha-features)
 in the handbook when writing about Alpha features.
 
 ## and/or
@@ -124,7 +124,7 @@ Try to avoid **below** when referring to an example or table in a documentation
 
 Use uppercase for **Beta**. For example: **The XYZ feature is in Beta.** or **This Beta release is ready to test.**
 
-You might also want to link to [this section](https://about.gitlab.com/handbook/product/gitlab-the-product/#alpha-beta-ga)
+You might also want to link to [this section](../../../policy/alpha-beta-support.md#beta-features)
 in the handbook when writing about Beta features.
 
 ## blacklist
diff --git a/doc/user/admin_area/analytics/dev_ops_report.md b/doc/user/admin_area/analytics/dev_ops_report.md
index df34cd03d71..2ad18d5f70e 100644
--- a/doc/user/admin_area/analytics/dev_ops_report.md
+++ b/doc/user/admin_area/analytics/dev_ops_report.md
@@ -39,7 +39,7 @@ feature is available.
 
 ## DevOps Adoption **(ULTIMATE SELF)**
 
-> - [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/247112) in GitLab 13.7 as a [Beta feature](https://about.gitlab.com/handbook/product/gitlab-the-product/#beta).
+> - [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/247112) in GitLab 13.7 as a [Beta feature](../../../policy/alpha-beta-support.md#beta-features).
 > - The Overview tab [introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/330401) in GitLab 14.1.
 > - DAST and SAST metrics [added](https://gitlab.com/gitlab-org/gitlab/-/issues/328033) in GitLab 14.1.
 > - Fuzz Testing metrics [added](https://gitlab.com/gitlab-org/gitlab/-/issues/330398) in GitLab 14.2.
diff --git a/doc/user/admin_area/settings/user_and_ip_rate_limits.md b/doc/user/admin_area/settings/user_and_ip_rate_limits.md
index d713ef4b4e0..ad61f18343c 100644
--- a/doc/user/admin_area/settings/user_and_ip_rate_limits.md
+++ b/doc/user/admin_area/settings/user_and_ip_rate_limits.md
@@ -22,6 +22,10 @@ NOTE:
 By default, all Git operations are first tried unauthenticated. Because of this, HTTP Git operations
 may trigger the rate limits configured for unauthenticated requests.
 
+NOTE:
+The rate limits for API requests don't affect requests made by the frontend, as these are always
+counted as web traffic.
+
 ## Enable unauthenticated API request rate limit
 
 To enable the unauthenticated request rate limit:
diff --git a/doc/user/application_security/cluster_image_scanning/index.md b/doc/user/application_security/cluster_image_scanning/index.md
index 5f2dd626526..e2ac9696d8a 100644
--- a/doc/user/application_security/cluster_image_scanning/index.md
+++ b/doc/user/application_security/cluster_image_scanning/index.md
@@ -10,7 +10,7 @@ info: To determine the technical writer assigned to the Stage/Group associated w
 > [Introduced](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/) in GitLab 14.1.
 
 WARNING:
-This analyzer is in [Alpha](https://about.gitlab.com/handbook/product/gitlab-the-product/#alpha)
+This analyzer is in [Alpha](../../../policy/alpha-beta-support.md#alpha-features)
 and is unstable. The JSON report and CI/CD configuration may be subject to change or breakage
 across GitLab releases.
 
diff --git a/doc/user/application_security/coverage_fuzzing/index.md b/doc/user/application_security/coverage_fuzzing/index.md
index 225c2ec0a4d..c3051f8a148 100644
--- a/doc/user/application_security/coverage_fuzzing/index.md
+++ b/doc/user/application_security/coverage_fuzzing/index.md
@@ -124,7 +124,7 @@ You can download the JSON report file from the CI/CD pipelines page. For more in
 
 ### Coverage-guided fuzz testing report
 
-> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/220062) in GitLab 13.3 as an [Alpha feature](https://about.gitlab.com/handbook/product/gitlab-the-product/#alpha).
+> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/220062) in GitLab 13.3 as an [Alpha feature](../../../policy/alpha-beta-support.md#alpha-features).
 
 For detailed information about the `gl-coverage-fuzzing-report.json` file's format, read the
 [schema](https://gitlab.com/gitlab-org/security-products/security-report-schemas/-/blob/master/dist/coverage-fuzzing-report-format.json).
diff --git a/doc/user/application_security/dast/browser_based.md b/doc/user/application_security/dast/browser_based.md
index 5d1e57553f4..4cde1847419 100644
--- a/doc/user/application_security/dast/browser_based.md
+++ b/doc/user/application_security/dast/browser_based.md
@@ -10,7 +10,7 @@ type: reference, howto
 > [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/323423) in GitLab 13.12.
 
 WARNING:
-This product is in an early-access stage and is considered a [beta](https://about.gitlab.com/handbook/product/gitlab-the-product/#beta) feature.
+This product is in an early-access stage and is considered a [beta](../../../policy/alpha-beta-support.md#beta-features) feature.
 
 GitLab DAST's new browser-based crawler is a crawl engine built by GitLab to test Single Page Applications (SPAs) and traditional web applications.
 Due to the reliance of modern web applications on JavaScript, handling SPAs or applications that are dependent on JavaScript is paramount to ensuring proper coverage of an application for Dynamic Application Security Testing (DAST).
diff --git a/doc/user/group/devops_adoption/index.md b/doc/user/group/devops_adoption/index.md
index e570f40d8e6..333bef84dcc 100644
--- a/doc/user/group/devops_adoption/index.md
+++ b/doc/user/group/devops_adoption/index.md
@@ -6,7 +6,7 @@ info: To determine the technical writer assigned to the Stage/Group associated w
 
 # Group DevOps Adoption **(ULTIMATE)**
 
-> - [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/321083) in GitLab 13.11 as a [Beta feature](https://about.gitlab.com/handbook/product/gitlab-the-product/#beta).
+> - [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/321083) in GitLab 13.11 as a [Beta feature](../../../policy/alpha-beta-support.md#beta-features).
 > - [Feature flag removed](https://gitlab.com/gitlab-org/gitlab/-/issues/333556) in GitLab 14.1.
 > - The Overview tab [introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/330401) in GitLab 14.1.
 > - DAST and SAST metrics [added](https://gitlab.com/gitlab-org/gitlab/-/issues/328033) in GitLab 14.1.
diff --git a/doc/user/group/index.md b/doc/user/group/index.md
index 78a82ac3bd1..a36a0774a5d 100644
--- a/doc/user/group/index.md
+++ b/doc/user/group/index.md
@@ -68,19 +68,9 @@ To create a group:
    - Select **Menu > Groups**, and on the right, select **Create group**.
    - To the left of the search box, select the plus sign and then **New group**.
 1. Select **Create group**.
-1. For the **Group name**, use only:
-   - Alphanumeric characters
-   - Emojis
-   - Underscores
-   - Dashes, dots, spaces, and parentheses (however, it cannot start with any of these characters)
-
-   For a list of words that cannot be used as group names, see [reserved names](../reserved_names.md).
-
-1. For the **Group URL**, which is used for the [namespace](#namespaces),
-   use only:
-   - Alphanumeric characters
-   - Underscores
-   - Dashes and dots (it cannot start with dashes or end in a dot)
+1. Enter a name for the group in **Group name**. For a list of words that cannot be used as group names, see
+   [reserved names](../reserved_names.md).
+1. Enter a path for the group in **Group URL**, which is used for the [namespace](#namespaces).
 1. Choose the [visibility level](../../public_access/public_access.md).
 1. Personalize your GitLab experience by answering the following questions:
    - What is your role?
diff --git a/doc/user/packages/package_registry/index.md b/doc/user/packages/package_registry/index.md
index 55bfc56fc88..a2228148447 100644
--- a/doc/user/packages/package_registry/index.md
+++ b/doc/user/packages/package_registry/index.md
@@ -130,7 +130,7 @@ The Package Registry supports the following formats:
 | [Go](../go_proxy/index.md) | 13.1+ | [Alpha](https://gitlab.com/groups/gitlab-org/-/epics/3043) |
 | [Ruby gems](../rubygems_registry/index.md) | 13.10+ | [Alpha](https://gitlab.com/groups/gitlab-org/-/epics/3200) |
 
-[Status](https://about.gitlab.com/handbook/product/gitlab-the-product/#alpha-beta-ga):
+[Status](../../../policy/alpha-beta-support.md):
 
 - Alpha: behind a feature flag and not officially supported.
 - Beta: several known issues that may prevent expected use.
diff --git a/doc/user/profile/preferences.md b/doc/user/profile/preferences.md
index 63be88f90d6..52baf5189e1 100644
--- a/doc/user/profile/preferences.md
+++ b/doc/user/profile/preferences.md
@@ -43,7 +43,7 @@ The default theme is Indigo. You can choose between 10 themes:
 
 GitLab has started work on dark mode! The dark mode Alpha release is available in the
 spirit of iteration and the lower expectations of
-[Alpha versions](https://about.gitlab.com/handbook/product/gitlab-the-product/#alpha).
+[Alpha versions](../../policy/alpha-beta-support.md#alpha-features).
 
 Progress on dark mode is tracked in the [Dark theme epic](https://gitlab.com/groups/gitlab-org/-/epics/2902).
 See the epic for:
diff --git a/doc/user/project/clusters/serverless/index.md b/doc/user/project/clusters/serverless/index.md
index 265a60c6f2c..29164da307b 100644
--- a/doc/user/project/clusters/serverless/index.md
+++ b/doc/user/project/clusters/serverless/index.md
@@ -10,7 +10,7 @@ info: To determine the technical writer assigned to the Stage/Group associated w
 > - [Deprecated](https://gitlab.com/groups/gitlab-org/configure/-/epics/6) in GitLab 14.3.
 
 WARNING:
-Serverless is currently in [alpha](https://about.gitlab.com/handbook/product/gitlab-the-product/#alpha).
+Serverless is currently in [alpha](../../../../policy/alpha-beta-support.md#alpha-features).
 
 ## Overview
 
diff --git a/doc/user/project/import/github.md b/doc/user/project/import/github.md
index ce105f3b29d..9f1c049045c 100644
--- a/doc/user/project/import/github.md
+++ b/doc/user/project/import/github.md
@@ -26,7 +26,7 @@ The following aspects of a project are imported:
 - Regular issue and pull request comments
 - [Git Large File Storage (LFS) Objects](../../../topics/git/lfs/index.md)
 - Pull request comments replies in discussions ([GitLab.com & 14.5+](https://gitlab.com/gitlab-org/gitlab/-/issues/336596))
-- Diff Notes suggestions ([GitLab.com & 14.7+](https://gitlab.com/gitlab-org/gitlab/-/issues/340624)) [with a flag](../../../administration/feature_flags.md) named `github_importer_use_diff_note_with_suggestions`. Enabled by default.
+- Diff Notes suggestions ([GitLab.com & 14.7+](https://gitlab.com/gitlab-org/gitlab/-/issues/340624))
 
 References to pull requests and issues are preserved (GitLab.com & 8.7+), and
 each imported repository maintains visibility level unless that [visibility
diff --git a/doc/user/project/import/phabricator.md b/doc/user/project/import/phabricator.md
index 80f2d6d7e62..96b38b49960 100644
--- a/doc/user/project/import/phabricator.md
+++ b/doc/user/project/import/phabricator.md
@@ -11,7 +11,7 @@ info: To determine the technical writer assigned to the Stage/Group associated w
 
 WARNING:
 The Phabricator task importer is in
-[beta](https://about.gitlab.com/handbook/product/gitlab-the-product/#beta) and is
+[beta](../../../policy/alpha-beta-support.md#beta-features) and is
 [**not** complete](https://gitlab.com/gitlab-org/gitlab/-/issues/284406). It imports
 only an issue's title and description. The GitLab project created during the import
 process contains only issues, and the associated repository is disabled.
diff --git a/doc/user/project/merge_requests/commits.md b/doc/user/project/merge_requests/commits.md
index 1c5c0a6854a..8970f958603 100644
--- a/doc/user/project/merge_requests/commits.md
+++ b/doc/user/project/merge_requests/commits.md
@@ -36,7 +36,7 @@ To seamlessly navigate among commits in a merge request:
 > - To use in GitLab self-managed instances, ask a GitLab administrator to [enable it](#enable-or-disable-viewing-merge-request-commits-in-context).
 
 WARNING:
-This feature is in [beta](https://about.gitlab.com/handbook/product/gitlab-the-product/#beta)
+This feature is in [beta](../../../policy/alpha-beta-support.md#beta-features)
 and is [incomplete](https://gitlab.com/groups/gitlab-org/-/epics/1192).
 Previously merged commits can be added, but they can't be removed due to
 [this bug](https://gitlab.com/gitlab-org/gitlab/-/issues/325538).
diff --git a/doc/user/project/merge_requests/reviews/suggestions.md b/doc/user/project/merge_requests/reviews/suggestions.md
index ce66d42a080..9868f2619ba 100644
--- a/doc/user/project/merge_requests/reviews/suggestions.md
+++ b/doc/user/project/merge_requests/reviews/suggestions.md
@@ -114,7 +114,7 @@ introduced by [#25381](https://gitlab.com/gitlab-org/gitlab/-/issues/25381).
 
 ## Batch suggestions
 
-> - [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/25486) in GitLab 13.1 as an [alpha feature](https://about.gitlab.com/handbook/product/gitlab-the-product/#alpha) with a flag named `batch_suggestions`, disabled by default.
+> - [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/25486) in GitLab 13.1 as an [alpha feature](../../../../policy/alpha-beta-support.md#alpha-features) with a flag named `batch_suggestions`, disabled by default.
 > - [Enabled by default](https://gitlab.com/gitlab-org/gitlab/-/issues/227799) in GitLab 13.2.
 > - [Generally available](https://gitlab.com/gitlab-org/gitlab/-/issues/320755) in GitLab 13.11. [Feature flag `batch_suggestions`](https://gitlab.com/gitlab-org/gitlab/-/issues/320755) removed.
 > - [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/326168) custom commit messages for batch suggestions in GitLab 14.4.