Age | Commit message (Collapse) | Author |
|
Use `verts` instead of `vertices` and `polys` instead of `polygons`
in the API added in 05952aa94d33eeb50. This aligns better with
existing naming where the shorter names are much more common.
|
|
For copy-on-write, we want to share attribute arrays between meshes
where possible. Mutable pointers like `Mesh.mvert` make that difficult
by making ownership vague. They also make code more complex by adding
redundancy.
The simplest solution is just removing them and retrieving layers from
`CustomData` as needed. Similar changes have already been applied to
curves and point clouds (e9f82d3dc7ee, 410a6efb747f). Removing use of
the pointers generally makes code more obvious and more reusable.
Mesh data is now accessed with a C++ API (`Mesh::edges()` or
`Mesh::edges_for_write()`), and a C API (`BKE_mesh_edges(mesh)`).
The CoW changes this commit makes possible are described in T95845
and T95842, and started in D14139 and D14140. The change also simplifies
the ongoing mesh struct-of-array refactors from T95965.
**RNA/Python Access Performance**
Theoretically, accessing mesh elements with the RNA API may become
slower, since the layer needs to be found on every random access.
However, overhead is already high enough that this doesn't make a
noticible differenc, and performance is actually improved in some
cases. Random access can be up to 10% faster, but other situations
might be a bit slower. Generally using `foreach_get/set` are the best
way to improve performance. See the differential revision for more
discussion about Python performance.
Cycles has been updated to use raw pointers and the internal Blender
mesh types, mostly because there is no sense in having this overhead
when it's already compiled with Blender. In my tests this roughly
halves the Cycles mesh creation time (0.19s to 0.10s for a 1 million
face grid).
Differential Revision: https://developer.blender.org/D15488
|
|
openSubdiv_init() would detect available evaluators before any OpenGL context
exists, causing a crash with libepoxy. This test however is redundant as we
already check the requirements on the Blender side through the GPU API.
To simplify things, completely remove the device detection in the opensubdiv
module and reduce the evaluators to just CPU and GPU. The plan here is to move
to the GPU module abstraction over OpenGL/Metal/Vulkan and so all these
different backends no longer make sense.
This also removes the user preference for OpenSubdiv compute device, which was
not used for the new GPU subdivision implementation.
Ref D15291
Differential Revision: https://developer.blender.org/D15470
|
|
|
|
|
|
Subdivision did not properly update when evaluating first without and then with
orco coordinates. Now update the subdivision evaluator settings every time, and
reallocate the vertex data buffer when needed.
there is an additional issue in this file where orco coordinates are not
available immediately on the first frame when they should be, and only appear
on the second frame. However that is an old limitation related to the depsgraph
not getting re-evaluated on viewport display mode changes, here we just fix the
crash.
|
|
|
|
This makes changes to the opensubdiv module to support additional vertex data
besides the vertex position, that is smootly interpolated the same way. This is
different than varying data which is interpolated linearly.
Fixes T96596: wrong generated texture coordinates with GPU subdivision. In that
bug lazy subdivision would not interpolate orcos.
Later on, this implementation can also be used to remove the modifier stack
mechanism where modifiers are evaluated a second time for orcos, which is messy
and inefficient. But that's a more risky change, this is just the part to fix
the bug in 3.2.
Differential Revision: https://developer.blender.org/D14973
|
|
Follows the code style.
|
|
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
|
|
I noticed these when doing final cleanup on rBcfa53e0fbeed.
One use was removed in that commit, the others were unused
going further back a few years.
Differential Revision: https://developer.blender.org/D13834
|
|
As described in T91186, this commit moves mesh vertex normals into a
contiguous array of float vectors in a custom data layer, how face
normals are currently stored.
The main interface is documented in `BKE_mesh.h`. Vertex and face
normals are now calculated on-demand and cached, retrieved with an
"ensure" function. Since the logical state of a mesh is now "has
normals when necessary", they can be retrieved from a `const` mesh.
The goal is to use on-demand calculation for all derived data, but
leave room for eager calculation for performance purposes (modifier
evaluation is threaded, but viewport data generation is not).
**Benefits**
This moves us closer to a SoA approach rather than the current AoS
paradigm. Accessing a contiguous `float3` is much more efficient than
retrieving data from a larger struct. The memory requirements for
accessing only normals or vertex locations are smaller, and at the
cost of more memory usage for just normals, they now don't have to
be converted between float and short, which also simplifies code
In the future, the remaining items can be removed from `MVert`,
leaving only `float3`, which has similar benefits (see T93602).
Removing the combination of derived and original data makes it
conceptually simpler to only calculate normals when necessary.
This is especially important now that we have more opportunities
for temporary meshes in geometry nodes.
**Performance**
In addition to the theoretical future performance improvements by
making `MVert == float3`, I've done some basic performance testing
on this patch directly. The data is fairly rough, but it gives an idea
about where things stand generally.
- Mesh line primitive 4m Verts: 1.16x faster (36 -> 31 ms),
showing that accessing just `MVert` is now more efficient.
- Spring Splash Screen: 1.03-1.06 -> 1.06-1.11 FPS, a very slight
change that at least shows there is no regression.
- Sprite Fright Snail Smoosh: 3.30-3.40 -> 3.42-3.50 FPS, a small
but observable speedup.
- Set Position Node with Scaled Normal: 1.36x faster (53 -> 39 ms),
shows that using normals in geometry nodes is faster.
- Normal Calculation 1.6m Vert Cube: 1.19x faster (25 -> 21 ms),
shows that calculating normals is slightly faster now.
- File Size of 1.6m Vert Cube: 1.03x smaller (214.7 -> 208.4 MB),
Normals are not saved in files, which can help with large meshes.
As for memory usage, it may be slightly more in some cases, but
I didn't observe any difference in the production files I tested.
**Tests**
Some modifiers and cycles test results need to be updated with this
commit, for two reasons:
- The subdivision surface modifier is not responsible for calculating
normals anymore. In master, the modifier creates different normals
than the result of the `Mesh` normal calculation, so this is a bug
fix.
- There are small differences in the results of some modifiers that
use normals because they are not converted to and from `short`
anymore.
**Future improvements**
- Remove `ModifierTypeInfo::dependsOnNormals`. Code in each modifier
already retrieves normals if they are needed anyway.
- Copy normals as part of a better CoW system for attributes.
- Make more areas use lazy instead of eager normal calculation.
- Remove `BKE_mesh_normals_tag_dirty` in more places since that is
now the default state of a new mesh.
- Possibly apply a similar change to derived face corner normals.
Differential Revision: https://developer.blender.org/D12770
|
|
|
|
This evaluator is used in order to evaluate subdivision at render time, allowing for
faster renders of meshes with a subdivision surface modifier placed at the last
position in the modifier list.
When evaluating the subsurf modifier, we detect whether we can delegate evaluation
to the draw code. If so, the subdivision is first evaluated on the GPU using our own
custom evaluator (only the coarse data needs to be initially sent to the GPU), then,
buffers for the final `MeshBufferCache` are filled on the GPU using a set of
compute shaders. However, some buffers are still filled on the CPU side, if doing so
on the GPU is impractical (e.g. the line adjacency buffer used for x-ray, whose
logic is hardly GPU compatible).
This is done at the mesh buffer extraction level so that the result can be readily used
in the various OpenGL engines, without having to write custom geometry or tesselation
shaders.
We use our own subdivision evaluation shaders, instead of OpenSubDiv's vanilla one, in
order to control the data layout, and interpolation. For example, we store vertex colors
as compressed 16-bit integers, while OpenSubDiv's default evaluator only work for float
types.
In order to still access the modified geometry on the CPU side, for use in modifiers
or transform operators, a dedicated wrapper type is added `MESH_WRAPPER_TYPE_SUBD`.
Subdivision will be lazily evaluated via `BKE_object_get_evaluated_mesh` which will
create such a wrapper if possible. If the final subdivision surface is not needed on
the CPU side, `BKE_object_get_evaluated_mesh_no_subsurf` should be used.
Enabling or disabling GPU subdivision can be done through the user preferences (under
Viewport -> Subdivision).
See patch description for benchmarks.
Reviewed By: campbellbarton, jbakker, fclem, brecht, #eevee_viewport
Differential Revision: https://developer.blender.org/D12406
|
|
This shows the text as part of the assertion message.
|
|
|
|
In very rare occations, the returned derivates would be the same. This
would lead to the normal calculation breaking (zero normals).
Solution: Add this edge case to the other corner case checks.
Reviewed By: Sergey
|
|
This addresses warnings from Clang-Tidy's `readability-else-after-return`
rule in the `source/blender/blenkernel` module.
No functional changes.
|
|
Actually, begin will do the entire initialization.
Refine will only refine if there is a topology refiner associated
with the Subdiv descriptor.
Allows to refine Subdiv to new coarse positions without touching
displacement evaluation. Will be needed to update SubdivCCG during
sculpt undo.
|
|
|
|
Both partial derivatives were evaluated to 0 for a special vertex on
Suzanne model: this is happening on a vertex where two adjacent faces
with 2 common edges are connected (in the nose of Suzanne).
This was breaking multires in this point since tangent matrix is all
zeroes, and hence no displacement can be applied in that vertex.
|
|
|
|
Deformation of subdivision surface modifier was using wrong coordinates
for the coarse mesh: as the modifier flow goes the coordinates are to be
taken from the input array of coordinates.
|
|
When the result isn't used, prefer post increment/decrement
(already used nearly everywhere in Blender).
|
|
|
|
Apply clang format as proposed in T53211.
For details on usage and instructions for migrating branches
without conflicts, see:
https://wiki.blender.org/wiki/Tools/ClangFormat
|
|
While \file doesn't need an argument, it can't have another doxy
command after it.
|
|
Move \ingroup onto same line to be more compact and
make it clear the file is in the group.
|
|
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
|
|
Makes it more clear to see what was exactly happening at
the last invocation of subsurf modifier.
|
|
|
|
|
|
Adds a displacement support for OpenSubdiov based subsurf object implemented
as a callback which gives vector displacement in object space. Currently is
implemented to calculate displacement based on myltires displacement grids,
but we can support things in the future if needed.
Submitting to review to see if there is something obviously wrong in the
direction (old multires code was sharing same displacement code to both
calculate final displaced mesh and reshape an existing one, which is rather
confusing and probably can be done more cleanly?).
Reviewers: brecht
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D3604
|
|
C-API is way smaller than the rest of the code which uses it.
So better to conditionally compile stub implementation than
to keep adding ifdef everywhere.
|
|
|
|
|
|
Before that it was only first UV layer which was properly evaluated,
the rest were ignored. Now all layers are being properly handled.
|
|
|
|
Applies to vertices and edges. Biggest annoyance here is that OpenSubdiv's
topology converter expects that there is no loose geometry, otherwise it
is getting confused.
For now solution is to create some sort of mapping from real Mesh vertex
and edge index to a non-loose-index. Now the annoying part is that this
is an extra step to calculate before we can compare topology, meaning FPS
will not be as great as if we knew for sure that topology didn't change.
Loose edges subdivision is different from what it used to be with old
subdivision code, but probably nice feature now is that endpoints of loose
edges are stay at the coarse vertex locations. This allows to have things
like plane with hair strands, without need to duplicate edge vertices at
endpoints.
All this required some re-work of topology refiner creation, which is now
only passing edges and vertices which are adjacent to face. This is how
topology refiner is supposed to be used, and this is how its validator
also works. Vertices which are adjacent to loose edges are marked as
infinite sharp. This seems to be good-enough approximation for now. In the
future we might tweaks things a bit and push such vertices in average
direction of loose edges, to match old subdivision code closer.
|
|
|
|
The idea is to use this as a replacement of old CCG, now it is
based on OpenSubdiv. The goal is to reduce any possible overhead
which was happening with OpenSubdiv used by CCG.
Currently implemented/supported:
- Creation from mesh, including topology on OpenSubdiv side,
its refinement.
- Evaluation of limit point, first order derivatives, normal,
and face-varying data for individual coarse position.
- Evaluation of whole patches.
Currently not optimized, uses evaluation of individual coarse
positions.
- Creation of Mesh from subdiv, with all geometry being real:
all mvert, medge, mloop, and mpoly.
This includes custom data interpolation, but all faces currently
are getting separated (they are converted to ptex patches, which
we need to weld back together).
Still need to support lighter weights grids and such, but this
is already a required part to have subsurf working in the middle
of modifier stack.
Annoying part is ifdef all over the place, to keep it compilable
when OpenSubdiv is disabled. More cleaner approach would be to
have stub API for OpenSubdiv, so everything gets ifdef-ed in a
much fewer places.
|