| Age | Commit message (Collapse) | Author |
|---|
|
Also replace "dm" for evaluated mesh in some comments.
|
|
On NVidia GPUs, when the blue channel was between 0 and 0.1,
the overlay's alpha would increase, making it invisible.
With the `overlay_line_fb` frame buffer bound in `overlay_engine.cc`
there are two outputs to write to: the color and the line output, which
is used for making smooth antialiased lines. The overlay is in its
current position in the order of overlays so that it draws on top of
curve wire lines. Not writing to that second output is undefined
behavior, so fix it by writing zeros. In the future, the overlay
could be smoothed on curves using that second texture.
Thanks to Clément for the explanation of the issue!
|
|
The core issue seems to be that `BKE_curve_minmax` does not create the
correct bounding box for `Curve` data passed to the render engine.
That's because this `Curve` object does not contain the legacy curve
data structure.
Fixing this will likely require some more consideration, so this fix just
avoids the culling check for now, which is actually also done in
`OVERLAY_extra_wire` using the same approach.
|
|
Rewrite PBVH draw to allocate attributes into individual VBOs.
The old system tried to create a single VBO that could feed
every open viewport. This required uploading every color and
UV attribute to the viewport whether needed or not, often exceeding
the VBO limit.
This new system creates one VBO per attribute. Each attribute layout is
given its own GPU batch which is cached inside the owning PBVH node.
Notes:
* This is a full C++ rewrite. The old code is still there; ripping it out
can happen later.
* PBVH nodes now have a collection of batches, PBVHBatches, that keeps
track of all the batches inside the node.
* Batches are built exclusively from a list of attributes.
* Each attribute has its own VBO.
* Overlays, workbench and EEVEE can all have different attribute
layouts, each of which will get its own batch.
Reviewed by: Clement Foucault
Differential Revision: https://developer.blender.org/D15428
Ref D15428
|
|
This adds support for showing geometry passed to the Viewer in the 3d
viewport (instead of just in the spreadsheet). The "viewer geometry"
bypasses the group output. So it is not necessary to change the final
output of the node group to be able to see the intermediate geometry.
**Activation and deactivation of a viewer node**
* A viewer node is activated by clicking on it.
* Ctrl+shift+click on any node/socket connects it to the viewer and
makes it active.
* Ctrl+shift+click in empty space deactivates the active viewer.
* When the active viewer is not visible anymore (e.g. another object
is selected, or the current node group is exit), it is deactivated.
* Clicking on the icon in the header of the Viewer node toggles whether
its active or not.
**Pinning**
* The spreadsheet still allows pinning the active viewer as before.
When pinned, the spreadsheet still references the viewer node even
when it becomes inactive.
* The viewport does not support pinning at the moment. It always shows
the active viewer.
**Attribute**
* When a field is linked to the second input of the viewer node it is
displayed as an overlay in the viewport.
* When possible the correct domain for the attribute is determined
automatically. This does not work in all cases. It falls back to the
face corner domain on meshes and the point domain on curves. When
necessary, the domain can be picked manually.
* The spreadsheet now only shows the "Viewer" column for the domain
that is selected in the Viewer node.
* Instance attributes are visualized as a constant color per instance.
**Viewport Options**
* The attribute overlay opacity can be controlled with the "Viewer Node"
setting in the overlays popover.
* A viewport can be configured not to show intermediate viewer-geometry
by disabling the "Viewer Node" option in the "View" menu.
**Implementation Details**
* The "spreadsheet context path" was generalized to a "viewer path" that
is used in more places now.
* The viewer node itself determines the attribute domain, evaluates the
field and stores the result in a `.viewer` attribute.
* A new "viewer attribute' overlay displays the data from the `.viewer`
attribute.
* The ground truth for the active viewer node is stored in the workspace
now. Node editors, spreadsheets and viewports retrieve the active
viewer from there unless they are pinned.
* The depsgraph object iterator has a new "viewer path" setting. When set,
the viewed geometry of the corresponding object is part of the iterator
instead of the final evaluated geometry.
* To support the instance attribute overlay `DupliObject` was extended
to contain the information necessary for drawing the overlay.
* The ctrl+shift+click operator has been refactored so that it can make
existing links to viewers active again.
* The auto-domain-detection in the Viewer node works by checking the
"preferred domain" for every field input. If there is not exactly one
preferred domain, the fallback is used.
Known limitations:
* Loose edges of meshes don't have the attribute overlay. This could be
added separately if necessary.
* Some attributes are hard to visualize as a color directly. For example,
the values might have to be normalized or some should be drawn as arrays.
For now, we encourage users to build node groups that generate appropriate
viewer-geometry. We might include some of that functionality in future versions.
Support for displaying attribute values as text in the viewport is planned as well.
* There seems to be an issue with the attribute overlay for pointclouds on
nvidia gpus, to be investigated.
Differential Revision: https://developer.blender.org/D15954
|
|
This code slipped through the final review step surely caused by a faulty
merge.
Fixes T101372 Regression: World shader setup crashes Blender in rendered view
Regression introduced by rB697b447c2069bbbbaa9929aab0ea1f66ef8bf4d0
|
|
|
|
Use function style casts in C++ headers & source.
|
|
Some changes missed from f68cfd6bb078482c4a779a6e26a56e2734edb5b8.
|
|
|
|
|
|
|
|
|
|
These shaders are only supported by the Metal backed.
Regression introduced by 1514e1a5b7e15ec0c11cd40c2b9389982bd5d00e
|
|
Regression introduced in 18b45aabf91ad0a407e8c7cd16c5503e7a99d6fa.
Caused by a bad merge.
|
|
|
|
This makes it easier to pass more parameters to the iterator in the future.
Differential Revision: https://developer.blender.org/D16047
|
|
|
|
This is required by the Metal backend to perform flushing of temporary objective-C resources. This is implemented as a global autoreleasepool, and is to ensure consistency such that all rendering operations, whether called via events, or via main loop will be within an autoreleasepool.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D15900
|
|
name collision.
For the Metal shader translation support for shader-global uniforms are remapped via macro's, and in such cases where a uniform name matches a vertex attribute name, compilation errors will occur due to this injected syntax being incompatible with the immediate code.
Also adding source-level function interface alternatives where sized arrays are passed in. These are not supported directly in Metal shading language and are instead handled as pointers. These pointers require explicit address-space qualifiers in some cases, if device/constant address space memory is passed into the function.
Ref T96261
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D15898
|
|
vertex shader fetch.
These implementations remove dependency on the Geometry pass by instead invoking one vertex shader instance for each expected output vertex, matching what a geometry shader would emit. Each vertex shader instance is then responsible for calculating the same output position based on its vertex_id as the logic would in the geometry shader version.
SSBO Vertex fetch enables full random-access into a vertex buffer by binding it as a read-only SSBO. This enables each instance to read neighbouring vertex data to perform contextual calculations as a geometry shader would, for cases where attribute Multiload is not supported.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D15901
|
|
MTLContext provides functionality for command encoding, binding management and graphics device management. MTLImmediate provides simple draw enablement with dynamically encoded data. These draws utilise temporary scratch buffer memory to provide minimal bandwidth overhead during workload submission.
This patch also contains empty placeholders for MTLBatch and MTLDrawList to enable testing of first pixels on-screen without failure.
The Metal API also requires access to the GHOST_Context to ensure the same pre-initialized Metal GPU device is used by the viewport. Given the explicit nature of Metal, explicit control is also needed over presentation, to ensure correct work scheduling and rendering pipeline state.
Authored by Apple: Michael Parkin-White
Ref T96261
(The diff is based on 043f59cb3b5835ba1a0bbf6f1cbad080b527f7f6)
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D15953
|
|
In UV editor, previously unable to see grid and image at same time.
Maniphest Tasks: T78391
Differential Revision: https://developer.blender.org/D16038
|
|
This was caused by the vertical/horizontal clasification being done in
NDC space which wasn't respecting the Aspect ratio.
Multiplying the test vector by the target size fixes the issue.
|
|
|
|
|
|
For example, allows a custom UV grid size of 4 x 12.
TODO: Fix snapping with custom UV grid sizes.
Manifest Tasks: T78391
Differential Revision: https://developer.blender.org/D16000
|
|
This just makes the minimum changes to make the files compile.
|
|
|
|
This reverts commit 34051fcc12f388375697dcfc6da53e9909058fe1.
Although for normal use this doesn't make a difference. But when working with
huge scenes and volumetrics + NVIDIA it made a work-around not possible anymore.
For the heist production we added a fix on the render-farm (enable GPU workarounds).
{rB34051fcc12f388375697dcfc6da53e9909058fe1} made another work-around not
accessible anymore and it and was requested to revert this change.
|
|
|
|
|
|
When a change happens which invalidates view layers the syncing will be postponed until the first usage.
This will improve importing or adding many objects in a single operation/script.
`BKE_view_layer_need_resync_tag` is used to tag the view layer to be out of sync. Before accessing
`BKE_view_layer_active_base_get`, `BKE_view_layer_active_object_get`, `BKE_view_layer_active_collection`
or `BKE_view_layer_object_bases` the caller should call `BKE_view_layer_synced_ensure`.
Having two functions ensures that partial syncing could be added as smaller patches in the future. Tagging a
view layer out of sync could be replaced with a partial sync. Eventually the number of full resyncs could be
reduced. After all tagging has been replaced with partial syncs the ensure_sync could be phased out.
This patch has been added to discuss the details and consequences of the current approach. For clarity
the call to BKE_view_layer_ensure_sync is placed close to the getters.
In the future this could be placed in more strategical places to reduce the number of calls or improve
performance. Finding those strategical places isn't that clear. When multiple operations are grouped
in a single script you might want to always check for resync.
Some areas found that can be improved. This list isn't complete.
These areas aren't addressed by this patch as these changes would be hard to detect to the reviewer.
The idea is to add changes to these areas as a separate patch. It might be that the initial commit would reduce
performance compared to master, but will be fixed by the additional patches.
**Object duplication**
During object duplication the syncing is temporarily disabled. With this patch this isn't useful as when disabled
the view_layer is accessed to locate bases. This can be improved by first locating the source bases, then duplicate
and sync and locate the new bases. Will be solved in a separate patch for clarity reasons ({D15886}).
**Object add**
`BKE_object_add` not only adds a new object, but also selects and activates the new base. This requires the
view_layer to be resynced. Some callers reverse the selection and activation (See `get_new_constraint_target`).
We should make the selection and activation optional. This would make it possible to add multiple objects
without having to resync per object.
**Postpone Activate Base**
Setting the basact is done in many locations. They follow a rule as after an action find the base and set
the basact. Finding the base could require a resync. The idea is to store in the view_layer the object which
base will be set in the basact during the next sync, reducing the times resyncing needs to happen.
Reviewed By: mont29
Maniphest Tasks: T73411
Differential Revision: https://developer.blender.org/D15885
|
|
Related to {D15885} that requires scene parameter
to be added in many places. To speed up the review process
the adding of the scene parameter was added in a separate
patch.
Reviewed By: mont29
Maniphest Tasks: T73411
Differential Revision: https://developer.blender.org/D15930
|
|
|
|
On NVIDIA volumetric resolve failed for large production scenes.
The result would remove most color from the final render. The cause
seems to be a faulty driver.
This change ported the fragment shader to a compute shader which
would select a different compiler branch and didn't show the error.
|
|
This change adds cryptomatte render passes to EEVEE-Next. Due to the upcoming viewport
compositor we also improved cryptomatte so it will be real-time. This also allows viewing
the cryptomatte passes in the viewport directly.
{F13482749}
A surface shader would store any active cryptomatte layer to a texture. Object hash is stored
as R, Asset hash as G and Material hash as B. Hashes are only calculated when the cryptomatte
layer is active to reduce any unneeded work.
During film accumulation the hashes are separated and stored in a texture array that matches
the cryptomatte standard. For the real-time use case sorting is skipped. For final rendering
the samples are sorted and normalized.
NOTE: Eventually we should also do sample normalization in the viewport in order to extract the correct
mask when using the viewport compositor.
Reviewed By: fclem
Maniphest Tasks: T99390
Differential Revision: https://developer.blender.org/D15753
|
|
|
|
|
|
the Image Editor
This reverts commit 32d4a67017ecf4af75a9bfde885526550a6534ba thus fixing T81002 again.
And in order not to break T81212 (again) a different fix was implemented.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D15840
|
|
Add a dedicated `owner_id` pointer to ID types that can be embedded
(Collections and NodeTrees), and modify slightly come code to make
handling those more safe and consistent.
This implements first part of T69169.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D15838
|
|
This was cause by a missing implementation of some post
processing attribute functions. Leading to unresolved reference.
|
|
|
|
orthographic view
It was using normalized vector instead of `viewCameraVec` which account for
orthographic views.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D15861
|
|
This was caused by rB07cf3ce92fa2. It was missing a sign flip.
|
|
Changes to the text caret (cursor) when editing Text objects in the
3D Viewport.
See D15797 for more details and examples.
Differential Revision: https://developer.blender.org/D15797
Reviewed by Brecht Van Lommel
|
|
The caculation of 7th SH coefficient need a negative sign
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D15635
|
|
|
|
This replaces the direct shader uniform layout declaration by a linear
search through a global buffer.
Each instance has an attribute offset inside the global buffer and an
attribute count.
This removes any padding and tighly pack all uniform attributes inside
a single buffer.
This would also remove the limit of 8 attribute but it is kept because of
compatibility with the old system that is still used by the old draw
manager.
|
|
|
