| Age | Commit message (Collapse) | Author |
|---|
|
Make the logic for converting NDOF Z-motion to a scale value more
straightforward. Flipping the Z axis was scaling by negative-time,
now the entire pan vector is scaled by time and the zoom value is
calculated as `scale = 1 - (z * time)` instead of `1 + (z * -time)`.
Although they're equivalent, confusion here caused T100953.
Also clamp the scale (while unlikely, negative scale wasn't prevented).
|
|
|
|
The last period is added automatically, for better or worse.
|
|
|
|
Related to {D15885} that requires scene parameter
to be added in many places. To speed up the review process
the adding of the scene parameter was added in a separate
patch.
Reviewed By: mont29
Maniphest Tasks: T73411
Differential Revision: https://developer.blender.org/D15930
|
|
Various situations can lead to un-saved UDIM tiles potentially losing
their contents. The most notable situation is a save and re-load of a
.blend file that has "generated" UDIM tiles that haven't been written to
disk yet. Normal "generated" images are reconstructed on demand in these
circumstances but UDIM tiles do not retain the information required for
reconstruction and empty tiles are presented to the user.
This patch stores the generated type information for each tile to solve
this particular issue. It also shifts the Image generation info into the
1st tile. The existing DNA fields are deprecated but RNA was modified as
to not break API compat.
There's two broad changes here that merit special callout:
- How to distinguish between a tile that should be reconstructed vs.
a tile that should remain empty because loading failed for the UDIMs
- How to better handle Image Source changes
The first issue is addressed as follows:
- Each time a tile is filled with generated content we set a new
IMA_GEN_TILE flag
- Each time a tile is saved to disk we remove the IMA_GEN_TILE flag
- When requesting an ibuf: If the ibuf is null, we check to see if
IMA_GEN_TILE is set. If it is set, go ahead and re-create the tile.
Otherwise, do nothing.
The second set of changes have to do with ensuring that information is
carried along as far as possible when the, sometimes destructive, act of
changing an Image Source is performed. Behavior should be a bit more
natural and expected now; though users will rarely, or should rarely, be
modifying this property. The full table describing the behavior is in
the differential.
Differential Revision: https://developer.blender.org/D14885
|
|
* Snap border to pixels just outside the drawn border, to more easily select
specific pixels by drawing a border inside them.
* Support cropped border renders.
|
|
Instead of duplicating logic many times.
|
|
Use const pointers to ImageSaveOptions and ImageFormatData for API
parameters where appropriate.
Differential Revision: https://developer.blender.org/D15400
|
|
Also move mis-placed doc-string.
|
|
Use the image user from the image editor to correctly get the frame in the
operators. Based on patch by Nicolas (john-g-h-doe) with changes by me.
Differential Revision: https://developer.blender.org/D15380
|
|
Regressed in the following commit due to an inverted conditional:
{rB1159b63a07fd2cbc7fc48e162d57721c9c85b3f6}
Differential Revision: https://developer.blender.org/D15389
|
|
Removes the following macros for scene/render frame values:
- `CFRA`
- `SUBFRA`
- `SFRA`
- `EFRA`
These macros don't add much, other than saving a few characters when typing.
It's not immediately clear what they refer to, they just hide what they
actually access. Just be explicit and clear about that.
Plus these macros gave read and write access to the variables, so eyesores like
this would be done (eyesore because it looks like assigning to a constant):
```
CFRA = some_frame_nbr;
```
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D15311
|
|
The poll function with same semantic was defined in both screen and
mask space modules. The only reason for this seems to be that the
image editor needed a mask poll function which was private to the
mask module.
Make the mask editing poll functions public, avoiding code duplication.
Also, added a brief explanation about what the poll functions are
checking for.
No user-level changes are expected to happen.
|
|
|
|
|
|
|
|
|
|
|
|
The existing BUTTONS_OT_file_browse operator that's used for
uiTemplateImage layouts fails to work correctly with UDIM textures.
This is mainly due to it not realizing that it must tokenize the
filepath before signaling that an update has been made. It also doesn't
work correctly when executing its SHIFT-click behavior to open the image
in an external application. Lastly, it doesn't set the filters to Images
and Movies which is suboptimal for the user.
The new operator takes the unique features of BUTTONS_OT_file_browse
and creates a customized variant better suited for images.
Differential Revision: https://developer.blender.org/D14824
|
|
Also simplify logic because (source == IMA_SRC_VIEWER) and
ELEM(type, IMA_TYPE_R_RESULT, IMA_TYPE_COMPOSITE) are the same
thing.
|
|
|
|
The original fix for T97366 was too restrictive and breaks real-world
cases of single-file UDIM textures. See D13297 for an example.
This patch effectively reverts the original fix and instead fixes the
downstream code to accept single-file ranges as necessary.
Note: This means it is very important for users to make use of the
"UDIM detection" option during `image.open` or drag n' drop scenarios in
order to declare their intent when loading their files.
Differential Revision: https://developer.blender.org/D14853
|
|
Previously these only supported a subset of what the save operator could do,
for example no multilayer or stereo saving, no proper color management. Now
share code with the image save operator so it's more consistent.
|
|
Make exec and invoke consistent so they both use operator properties if set.
|
|
* Respect the image file color space setitng for saving in various cases where
it was previously ignored. Previously it would often use the sRGB or Linear
color space even when not selected.
* For the Save As operator, add a Color Space option in the file browser to
choose the color space of the file. Previously this was chosen automatically,
now it's possible to e.g. resave a Linear image as Linear ACES.
* When changing the file format, the colorspace is automatically changed to an
appropriate color space for the file format. This already happened before, but
there was no visibility or control in the operator settings for this.
* Don't change color space when using the Save operator to save over the same
file.
* Fix missing color space conversion for 16 bit PNGs, where it assumed wrongly
assumed ibuf->rect would be used for saving. Add BKE_image_format_is_byte to
more accurately test this.
Fixes T74610
Ref T68926
Differential Revision: https://developer.blender.org/D14899
|
|
Store ImageSaveOptions directly in operator custom data instead of copying
to/from a copy on the stack.
Ref D14899
|
|
The logic here is tightly coupled to the other image saving code.
Ref D14899
|
|
This completes support for tiled texture packing on the Blender / Cycles
side of things.
Most of these changes fall into one of three categories:
- Updating Image handling code to pack/unpack tiled and multi-view images
- Updating Cycles to handle tiled textures through BlenderImageLoader
- Updating OSL to properly handle textures with multiple slots
Differential Revision: https://developer.blender.org/D14395
|
|
Fixes T96324, T96312, T96323
|
|
The Output Properties > Output panel now has a Color Management subpanel to
override scene settings. When set to Override instead of Follow Scene, there
are settings to:
* For OpenEXR, choose a (linear) colorspace for RGBA passes
* For other file formats, use different display/view/look/exposure/gamma
These settings affect animation render output, image save of renders and the
compositor file output node. Additionally, the image save operator and
compositor file output nodes also support overriding color management.
Includes some layout changes to the relevant panels to accomdate the new
settings and to improve consistency. Ideally subpanels would be used to better
organize these settings, however nodes and operators don't currently support
creating subpanels.
Differential Revision: https://developer.blender.org/D14402
|
|
Make a copy of ImageFormatData that contains the effective color management
settings, and pass that along to the various functions. This will make it
possible to add more complex logic later.
For compositing nodes, passing along view and display settings through
many functions made it harder to add additional settings, so just get those
from the scene now.
Differential Revision: https://developer.blender.org/D14401
|
|
|
|
Also fixes missing code to read/write/free/copy color management settings
in various places. This can't be set through the UI currently, but still
should be handled consistently.
|
|
So far it was needed to declare a new RNA struct to `RNA_access.h` manually.
Since 9b298cf3dbec we generate a `RNA_prototypes.h` for RNA property
declarations. Now this also includes the RNA struct declarations, so they don't
have to be added manually anymore.
Differential Revision: https://developer.blender.org/D13862
Reviewed by: brecht, campbellbarton
|
|
Activating a gizmo used the windows eventstate which may have values
newer than the event used to activate the gizmo.
This meant transforms check for the key that activated transform
could be incorrect.
Support passing an event when calling operators to avoid this problem.
|
|
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
|
|
Use the ID.recalc flag to detect when updates after frame-change is
needed. Since comparing the last calculated frame doesn't take undo into
account (see code-comment for details).
`ID_RECALC_AUDIO_SEEK` has been renamed to `ID_RECALC_FRAME_CHANGE`
since this is not only related to audio however internally this flag is
still categorized in `NodeType::AUDIO`.
Reviewed By: sergey
Ref D13942
|
|
`IMAGE_OT_new` operator would not properly clear the by-default one user
generated by 'new id' code, in case it could not tie the image to
anything.
|
|
This implements the design detailed in T92696 to support virtual
filenames for UDIM textures. Currently, the following 2 substitution
tokens are supported:
| Token | Meaning |
| ----- | ---- |
| <UDIM> | 1001 + u-tile + v-tile * 10 |
| <UVTILE> | Equivalent to u<u-tile + 1>_v<v-tile + 1> |
Example for u-tile of 3 and v-tile of 1:
filename.<UDIM>_ver0023.png --> filename.1014_ver0023.png
filename.<UVTILE>_ver0023.png --> filename.u4_v2_ver0023.png
For image loading, the existing workflow is unchanged. A user can select
one or more image files, belonging to one or more UDIM tile sets, and
have Blender load them all as it does today. Now the <UVTILE> format is
"guessed" just as the <UDIM> format was guessed before.
If guessing fails, the user can simply go into the Image Editor and type
the proper substitution in the filename. Once typing is complete,
Blender will reload the files and correctly fill the tiles. This
workflow is new as attempting to fix the guessing in current versions
did not really work, and the user was often stuck with a confusing
situation.
For image saving, the existing workflow is changed slightly. Currently,
when saving, a user has to be sure to type the filename of the first
tile (e.g. filename.1001.png) to save the entire UDIM set. The number
could differ if they start at a different tile etc. This is confusing.
Now, the user should type a filename containing the appropriate
substitution token. By default Blender will fill in a default name using
the <UDIM> token but the user is free to save out images using <UVTILE>
if they wish.
Differential Revision: https://developer.blender.org/D13057
|
|
Also add groups in some files.
|
|
Ref T92709
|
|
All `ARegion` variables should be called `region` unless there is
a good reason not to, since that is the convention.
|
|
Previously, `ImageTile->ok` and `ImageUser->ok` were used to indicate
whether an image failed to load. There were three possible values
which (probably) had the following meanings:
* `0`: There was an error while loading the image. Don't try to load again.
* `1`: Default value. Try to load the image.
* `2`: The image was loaded successfully.
This image-wide flag did not make sense unfortunately, because loading
may work for some frames of an image sequence but not for others.
Remember than an image data block can also contain a movie.
The purpose of the `->ok` flag was to serve as an optimization to avoid
trying to load a file over and over again when there is an error (e.g. the
file does not exist or is invalid). To get the optimization back, the patch
is changing `MovieCache` so that it can also cache failed load attempts.
As a consequence, `ibuf` is allowed to be `NULL` in a few more places.
I added the appropriate null checks.
This also solves issues when image sequences are used with the
Image Texture node in Geometry nodes (also see D12827).
Differential Revision: https://developer.blender.org/D12957
|
|
Use arrays for wmEvent coordinates, this quiets warnings with GCC11.
- `x, y` -> `xy`.
- `prevx, prevy` -> `prev_xy`.
- `prevclickx, prevclicky` -> `prev_click_xy`.
There is still some cleanup such as using `copy_v2_v2_int()`,
this can be done separately.
Reviewed By: campbellbarton, Severin
Ref D12901
|
|
This margin was inconsistently calculated: only taking the
visible region and interface scale into account in some cases.
|
|
This was left over from when changing the image set the faces texture.
|
|
|
|
This was noted as a TODO as it wraps RNA_property_string_get_alloc
which takes a length return argument.
|
|
Removes the artificial requirement that UDIM tile sets start at 1001.
Blender was already capable of handling sparse tile sets (non-contiguous
tiles) so the restriction around starting at 1001 was unnecessary in
general.
This required fixing a few UDIM-related python bugs around manually
updating the `tile_number` field on images as well. See the differential
for details. No script changes are necessary but they will now work,
correctly, in many more cases.
Differential Revision: https://developer.blender.org/D11859
|
