| Age | Commit message (Collapse) | Author |
|---|
|
Newer versions of Getopt::Long started giving warnings against our
(ab)use of it in "git send-email". Bump the minimum version
requirement for Perl to 5.8.1 (from September 2002) to allow
simplifying our implementation.
* tz/send-email-negatable-options:
send-email: avoid duplicate specification warnings
perl: bump the required Perl version to 5.8.1 from 5.8.0
|
|
Typoes in "git send-email -h" have been corrected.
* tz/send-email-helpfix:
send-email: remove stray characters from usage
|
|
A warning is issued for options which are specified more than once
beginning with perl-Getopt-Long >= 2.55. In addition to causing users
to see warnings, this results in test failures which compare the output.
An example, from t9001-send-email.37:
| +++ diff -u expect actual
| --- expect 2023-11-14 10:38:23.854346488 +0000
| +++ actual 2023-11-14 10:38:23.848346466 +0000
| @@ -1,2 +1,7 @@
| +Duplicate specification "no-chain-reply-to" for option "no-chain-reply-to"
| +Duplicate specification "to-cover|to-cover!" for option "to-cover"
| +Duplicate specification "cc-cover|cc-cover!" for option "cc-cover"
| +Duplicate specification "no-thread" for option "no-thread"
| +Duplicate specification "no-to-cover" for option "no-to-cover"
| fatal: longline.patch:35 is longer than 998 characters
| warning: no patches were sent
| error: last command exited with $?=1
| not ok 37 - reject long lines
Remove the duplicate option specs. These are primarily the explicit
'--no-' prefix opts which were added in f471494303 (git-send-email.perl:
support no- prefix with older GetOptions, 2015-01-30). This was done
specifically to support perl-5.8.0 which includes Getopt::Long 2.32[1].
Getopt::Long 2.33 added support for the '--no-' prefix natively by
appending '!' to the option specification string, which was included in
perl-5.8.1 and is not present in perl-5.8.0. The previous commit bumped
the minimum supported Perl version to 5.8.1 so we no longer need to
provide the '--no-' variants for negatable options manually.
Teach `--git-completion-helper` to output the '--no-' options. They are
not included in the options hash and would otherwise be lost.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The following commit will make use of a Getopt::Long feature which is
only present in Perl >= 5.8.1. Document that as the minimum version we
support.
Many of our Perl scripts will continue to run with 5.8.0 but this change
allows us to adjust them as needed without breaking any promises to our
users.
The Perl requirement was last changed in d48b284183 (perl: bump the
required Perl version to 5.8 from 5.6.[21], 2010-09-24). At that time,
5.8.0 was 8 years old. It is now over 21 years old.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A few stray single quotes crept into the usage string in a2ce608244
(send-email docs: add format-patch options, 2021-10-25). Remove them.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git send-email" did not have certain pieces of data computed yet
when it tried to validate the outging messages and its recipient
addresses, which has been sorted out.
* ms/send-email-validate-fix:
send-email: move validation code below process_address_list
|
|
The codepath to handle recipient addresses `git send-email
--compose` learns from the user was completely broken, which has
been corrected.
* jk/send-email-fix-addresses-from-composed-messages:
send-email: handle to/cc/bcc from --compose message
Revert "send-email: extract email-parsing code into a subroutine"
doc/send-email: mention handling of "reply-to" with --compose
|
|
Move validation logic below processing of email address lists so that
email validation gets the proper email addresses. As a side effect,
some initialization needed to be moved down. In order for validation
and the actual email sending to have the same initial state, the
initialized variables that get modified by pre_process_file are
encapsulated in a new function.
This fixes email address validation errors when the optional
perl module Email::Valid is installed and multiple addresses are passed
in on a single to/cc argument like --to=foo@example.com,bar@example.com.
A new test was added to t9001 to expose failures with this case in the
future.
Reported-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Michael Strawbridge <michael.strawbridge@amd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the user writes a message via --compose, send-email will pick up
various headers like "From", "Subject", etc and use them for other
patches as if they were specified on the command-line. But we don't
handle "To", "Cc", or "Bcc" this way; we just tell the user "those
aren't interpeted yet" and ignore them.
But it seems like an obvious thing to want, especially as the same
feature exists when the cover letter is generated separately by
format-patch. There it is gated behind the --to-cover option, but I
don't think we'd need the same control here; since we generate the
--compose template ourselves based on the existing input, if the user
leaves the lines unchanged then the behavior remains the same.
So let's fill in the implementation; like those other headers we already
handle, we just need to assign to the initial_* variables. The only
difference in this case is that they are arrays, so we'll feed them
through parse_address_line() to split them (just like we would when
reading a single string via prompting).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit b6049542b97e7b135e0e82bf996084d461224d32.
Prior to that commit, we read the results of the user editing the
"--compose" message in a loop, picking out parts we cared about, and
streaming the result out to a ".final" file. That commit split the
reading/interpreting into two phases; we'd now read into a hash, and
then pick things out of the hash.
The goal was making the code more readable. And in some ways it did,
because the ugly regexes are confined to the reading phase. But it also
introduced several bugs, because now the two phases need to match each
other. In particular:
- we pick out headers like "Subject: foo" with a case-insensitive
regex, and then use the user-provided header name as the key in a
case-sensitive hash. So if the user wrote "subject: foo", we'd no
longer recognize it as a subject.
- the namespace for the hash keys conflates header names with meta
information like "body". If you put "body: foo" in your message, it
would be misinterpreted as the actual message body (nobody is likely
to do that in practice, but it seems like an unnecessary danger).
- the handling for to/cc/bcc is totally broken. The behavior before
that commit is to recognize and skip those headers, with a note to
the user that they are not yet handled. Not great, but OK. But
after the patch, the reading side now splits the addresses into a
perl array-ref. But the interpreting side doesn't handle this at
all, and blindly prints the stringified array-ref value. This leads
to garbage like:
(mbox) Adding to: ARRAY (0x555b4345c428) from line 'To: ARRAY(0x555b4345c428)'
error: unable to extract a valid address from: ARRAY (0x555b4345c428)
What to do with this address? ([q]uit|[d]rop|[e]dit):
Probably not a huge deal, since nobody should even try to use those
headers in the first place (since they were not implemented). But
the new behavior is worse, and indicative of the sorts of problems
that come from having the two layers.
The revert had a few conflicts, due to later work in this area from
15dc3b9161 (send-email: rename variable for clarity, 2018-03-04) and
d11c943c78 (send-email: support separate Reply-To address, 2018-03-04).
I've ported the changes from those commits over as part of the conflict
resolution.
The new tests show the bugs. Note the use of GIT_SEND_EMAIL_NOTTY in the
second one. Without it, the test is happy to reach outside the test
harness to the developer's actual terminal (when run with the buggy
state before this patch).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When validating email addresses with `extract_valid_address_or_die()`,
we print out a helpful error message when the given input does not
contain a valid email address.
However, the pre-image of this patch looks something like:
my $address = shift;
$address = extract_valid_address($address):
die sprintf(__("..."), $address) if !$address;
which fails when given a bogus email address by trying to use $address
(which is undef) in a sprintf() expansion, like so:
$ git.compile send-email --to="pi <pi@pi>" /tmp/x/*.patch --force
Use of uninitialized value $address in sprintf at /home/ttaylorr/src/git/git-send-email line 1175.
error: unable to extract a valid address from:
This regression dates back to e431225569 (git-send-email: remove invalid
addresses earlier, 2012-11-22), but became more noticeable in a8022c5f7b
(send-email: expose header information to git-send-email's
sendemail-validate hook, 2023-04-19), which validates SMTP headers in
the sendemail-validate hook.
Avoid trying to format an undef by storing the given and cleaned address
separately. After applying this fix, the error contains the invalid
email address, and the warning disappears:
$ git.compile send-email --to="pi <pi@pi>" /tmp/x/*.patch --force
error: unable to extract a valid address from: pi <pi@pi>
Reported-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Every time git-send-email calls its ask() function to prompt the user,
we call term(), which instantiates a new Term::ReadLine object. But in
v1.46 of Term::ReadLine::Gnu (which provides the Term::ReadLine
interface on some platforms), its constructor refuses to create a second
instance[1]. So on systems with that version of the module, most
git-send-email instances will fail (as we usually prompt for both "to"
and "in-reply-to" unless the user provided them on the command line).
We can fix this by keeping a single instance variable and returning it
for each call to term(). In perl 5.10 and up, we could do that with a
"state" variable. But since we only require 5.008, we'll do it the
old-fashioned way, with a lexical "my" in its own scope.
Note that the tests in t9001 detect this problem as-is, since the
failure mode is for the program to die. But let's also beef up the
"Prompting works" test to check that it correctly handles multiple
inputs (if we had chosen to keep our FakeTerm hack in the previous
commit, then the failure mode would be incorrectly ignoring prompts
after the first).
[1] For discussion of why multiple instances are forbidden, see:
https://github.com/hirooih/perl-trg/issues/16
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Back in 280242d1cc (send-email: do not barf when Term::ReadLine does not
like your terminal, 2006-07-02), we added a fallback for when
Term::ReadLine's constructor failed: we'd have a FakeTerm object
instead, which would then die if anybody actually tried to call
readline() on it. Since we instantiated the $term variable at program
startup, we needed this workaround to let the program run in modes when
we did not prompt the user.
But later, in f4dc9432fd (send-email: lazily load modules for a big
speedup, 2021-05-28), we started loading Term::ReadLine lazily only when
ask() is called. So at that point we know we're trying to prompt the
user, and we can just die if ReadLine instantiation fails, rather than
making this fake object to lazily delay showing the error.
This should be OK even if there is no tty (e.g., we're in a cron job),
because Term::ReadLine will return a stub object in that case whose "IN"
and "OUT" functions return undef. And since 5906f54e47 (send-email:
don't attempt to prompt if tty is closed, 2009-03-31), we check for that
case and skip prompting.
And we can be sure that FakeTerm was not kicking in for such a
situation, because it has actually been broken since that commit! It
does not define "IN" or "OUT" methods, so perl would barf with an error.
If FakeTerm was in use, we were neither honoring what 5906f54e47 tried
to do, nor producing the readable message that 280242d1cc intended.
So we're better off just dropping FakeTerm entirely, and letting the
error reported by constructing Term::ReadLine through.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "git send-email" that uses the validate hook is fed a message
without and then with Message-ID, it failed to auto-assign a unique
Message-ID to the former and instead reused the Message-ID from the
latter, which has been corrected. This was a fix for a recent
regression caught before the release, so no need to mention it in
the release notes.
* jc/send-email-pre-process-fix:
t9001: mark the script as no longer leak checker clean
send-email: clear the $message_id after validation
|
|
Recently git-send-email started parsing the same message twice, once
to validate _all_ the message before sending even the first one, and
then after the validation hook is happy and each message gets sent,
to read the contents to find out where to send to etc.
Unfortunately, the effect of reading the messages for validation
lingered even after the validation is done. Namely $message_id gets
assigned if exists in the input files but the variable is global,
and it is not cleared before pre_process_file runs. This causes
reading a message without a message-id followed by reading a message
with a message-id to misbehave---the sub reports as if the message
had the same id as the previously written one.
Clear the variable before starting to read the headers in
pre_process_file.
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git send-email" learned "--header-cmd=<cmd>" that can inject
arbitrary e-mail header lines to the outgoing messages.
* mc/send-email-header-cmd:
send-email: detect empty blank lines in command output
send-email: add --header-cmd, --no-header-cmd options
send-email: extract execute_cmd from recipients_cmd
|
|
"git send-email" learned to give the e-mail headers to the validate
hook by passing an extra argument from the command line.
* ms/send-email-feed-header-to-validate-hook:
send-email: expose header information to git-send-email's sendemail-validate hook
send-email: refactor header generation functions
|
|
The email format does not allow blank lines in headers; detect such
input and report it as malformed and add a test for it.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Sometimes, adding a header different than CC or TO is desirable; for
example, when using Debbugs, it is best to use 'X-Debbugs-Cc' headers
to keep people in CC; this is an example use case enabled by the new
'--header-cmd' option.
The header unfolding logic is extracted to a subroutine so that it can
be reused; a test is added for coverage.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This refactor is to pave the way for the addition of the new
'--header-cmd' option to the send-email command.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
hook
To allow further flexibility in the Git hook, the SMTP header
information of the email which git-send-email intends to send, is now
passed as the 2nd argument to the sendemail-validate hook.
As an example, this can be useful for acting upon keywords in the
subject or specific email addresses.
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: Junio C Hamano <gitster@pobox.com>
Cc: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Michael Strawbridge <michael.strawbridge@amd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Split process_file and send_message into easier to use functions.
Making SMTP header information widely available.
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: Junio C Hamano <gitster@pobox.com>
Cc: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Michael Strawbridge <michael.strawbridge@amd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When sending patch series (with a cover-letter or not)
sendemail-validate is called with every email/patch file independently
from the others. When one of the patches depends on a previous one, it
may not be possible to use this hook in a meaningful way. A hook that
wants to check some property of the whole series needs to know which
patch is the final one.
Expose the current and total number of patches to the hook via the
GIT_SENDEMAIL_PATCH_COUNTER and GIT_SENDEMAIL_PATCH_TOTAL environment
variables so that both incremental and global validation is possible.
Sharing any other state between successive invocations of the validate
hook must be done via external means. For example, by storing it in
a git config sendemail.validateWorktree entry.
Add a sample script with placeholder validations and update tests to
check that the counters are properly exported.
Suggested-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Robin Jarry <robin@jarry.cc>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Consistently spell "Message-ID" as such, not "Message-Id".
* jc/spell-id-in-both-caps-in-message-id:
e-mail workflow: Message-ID is spelled with ID in both capital letters
|
|
We used to write "Message-Id:" and "Message-ID:" pretty much
interchangeably, and the header name is defined to be case
insensitive by the RFCs, but the canonical form "Message-ID:" is
used throughout the RFC documents, so let's imitate it ourselves.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
|
|
send-email relays unrecognized arguments to its format-patch call.
Passing '-v N' leads to an error because -v is consumed as
send-email's --validate. For example,
git send-email -v 3 @{u}
fails with
fatal: ambiguous argument '3': unknown revision or path not in the
working tree. [...]
To prevent this, add the short --reroll-count option to send-email's
main option list and explicitly provide it to the format-patch call.
There other format-patch options that send-email doesn't relay
properly, including at least -n, -N, and the diff option -D. Punt on
these because dealing with them is more complicated:
* they would require configuring send-email to not ignore option case
* send-email makes three GetOptions() calls with different sets of
options, the last being the main set of options. Unlike -v, which
is consumed by the last GetOptions call, the -n, -N, and -D options
are consumed as abbreviations by the earlier calls.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
String in submodule--helper is not correctly formatting
placeholders. The string in git-send-email is partial.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the "sendmail-validate" hook to be run via the "git hook run"
wrapper instead of via a direct invocation.
This is the smallest possibly change to get "send-email" using "git
hook run". We still check the hook itself with "-x", and set a
"GIT_DIR" variable, both of which are asserted by our tests. We'll
need to get rid of this special behavior if we start running N hooks,
but for now let's be as close to bug-for-bug compatible as possible.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-send-email(1) does not mention that "git format-patch" options are
accepted. Augment SYNOPSIS and DESCRIPTION to mention it.
Update git-send-email.perl USAGE to be consistent with
git-send-email(1).
Signed-off-by: Thiago Perrotta <tbperrotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git send-email --git-completion-helper" only prints "format-patch"
flags. Make it print "send-email" flags as well, extracting them
programmatically from its three existing "GetOptions".
Introduce a "uniq" subroutine, otherwise --cc-cover, --to-cover and
other flags would show up twice. In addition, deduplicate flags common
to both "send-email" and "format-patch", like --from.
Remove extraneous flags: --h and --git-completion-helper.
Add trailing "=" to options that expect an argument, inline with
the format-patch implementation.
Add a completion test for "send-email --validate", a send-email flag.
Signed-off-by: Thiago Perrotta <tbperrotta@gmail.com>
Based-on-patch-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Regression fix.
* ab/send-email-config-fix:
send-email: fix a "first config key wins" regression in v2.33.0
|
|
Even when running "git send-email" without its own threaded
discussion support, a threading related header in one message is
carried over to the subsequent message to result in an unwanted
threading, which has been corrected.
* mh/send-email-reset-in-reply-to:
send-email: avoid incorrect header propagation
|
|
Fix a regression in my c95e3a3f0b8 (send-email: move trivial config
handling to Perl, 2021-05-28) where we'd pick the first config key out
of multiple defined ones, instead of using the normal "last key wins"
semantics of "git config --get".
This broke e.g. cases where a .git/config would have a different
sendemail.smtpServer than ~/.gitconfig. We'd pick the ~/.gitconfig
over .git/config, instead of preferring the repository-local
version. The same would go for /etc/gitconfig etc.
The full list of impacted config keys (the %config_settings values
which are references to scalars, not arrays) is:
sendemail.smtpencryption
sendemail.smtpserver
sendemail.smtpserverport
sendemail.smtpuser
sendemail.smtppass
sendemail.smtpdomain
sendemail.smtpauth
sendemail.smtpbatchsize
sendemail.smtprelogindelay
sendemail.tocmd
sendemail.cccmd
sendemail.aliasfiletype
sendemail.envelopesender
sendemail.confirm
sendemail.from
sendemail.assume8bitencoding
sendemail.composeencoding
sendemail.transferencoding
sendemail.sendmailcmd
I.e. having any of these set in say ~/.gitconfig and in-repo
.git/config regressed in v2.33.0 to prefer the --global one over the
--local.
To test this add a test of config priority to one of these config
variables, most don't have tests at all, but there was an existing one
for sendemail.8bitEncoding.
The "git config" (instead of "test_config") is somewhat of an
anti-pattern, but follows established conventions in
t9001-send-email.sh, likewise with any other pattern or idiom in this
test.
The populating of home/.gitconfig and setting of HOME= is copied from
a test in t0017-env-helper.sh added in 1ff750b128e (tests: make
GIT_TEST_GETTEXT_POISON a boolean, 2019-06-21). This test fails
without this bugfix, but now it works.
Reported-by: Eli Schwartz <eschwartz@archlinux.org>
Tested-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If multiple independent patches are sent with send-email, even if the
"In-Reply-To" and "References" headers are not managed by --thread or
--in-reply-to, their values may be propagated from prior patches to
subsequent patches with no such headers defined.
To mitigate this and potential future issues, make sure all global
patch-specific variables are always either handled by
command-specific code (e.g. threading), or are reset to their default
values for every iteration.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Marvin Häuser <mhaeuser@posteo.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git send-email" optimization.
* ab/send-email-optim:
perl: nano-optimize by replacing Cwd::cwd() with Cwd::getcwd()
send-email: move trivial config handling to Perl
perl: lazily load some common Git.pm setup code
send-email: lazily load modules for a big speedup
send-email: get rid of indirect object syntax
send-email: use function syntax instead of barewords
send-email: lazily shell out to "git var"
send-email: lazily load config for a big speedup
send-email: copy "config_regxp" into git-send-email.perl
send-email: refactor sendemail.smtpencryption config parsing
send-email: remove non-working support for "sendemail.smtpssl"
send-email tests: test for boolean variables without a value
send-email tests: support GIT_TEST_PERL_FATAL_WARNINGS=true
|
|
"git send-email" learned the "--sendmail-cmd" command line option
and the "sendemail.sendmailCmd" configuration variable, which is a
more sensible approach than the current way of repurposing the
"smtp-server" that is meant to name the server to instead name the
command to talk to the server.
* ga/send-email-sendmail-cmd:
git-send-email: add option to specify sendmail command
|
|
Optimize the startup time of git-send-email by using an amended
config_regexp() function to retrieve the list of config keys and
values we're interested in.
For boolean keys we can handle the [true|false] case ourselves, and
the "--get" case didn't need any parsing. Let's leave "--path" and
other "--bool" cases to "git config". I'm not bothering with the
"undef" or "" case (true and false, respectively), let's just punt on
those and others and have "git config --type=bool" handle it.
The "grep { defined } @values" here covers a rather subtle case. For
list values such as sendemail.to it is possible as with any other
config key to provide a plain "-c sendemail.to", i.e. to set the key
as a boolean true. In that case the Git::config() API will return an
empty string, but this new parser will correctly return "undef".
However, that means we can end up with "undef" in the middle of a
list. E.g. for sendemail.smtpserveroption in conjuction with
sendemail.smtpserver as a path this would have produce a warning. For
most of the other keys we'd behave the same despite the subtle change
in the value, e.g. sendemail.to would behave the same because
Mail::Address->parse() happens to return an empty list if fed
"undef". For the boolean values we were already prepared to handle
these variables being initialized as undef anyway.
This brings the runtime of "git send-email" from ~60-~70ms to a very
steady ~40ms on my test box. We now run just one "git config"
invocation on startup instead of 8, the exact number will differ based
on the local sendemail.* config. I happen to have 8 of those set.
This brings the runtime of t9001-send-email.sh from ~13s down to ~12s
for me. The change there is less impressive as many of those tests set
various config values, and we're also getting to the point of
diminishing returns for optimizing "git send-email" itself.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It has been pointed out[1] that cwd() invokes "pwd(1)" while getcwd()
is a Perl-native XS function. For what we're using these for we can
use getcwd().
The performance difference is miniscule, we're saving on the order of
a millisecond or so, see [2] below for the benchmark. I don't think
this matters in practice for optimizing git-send-email or perl
execution (unlike the patches leading up to this one).
But let's do it regardless of that, if only so we don't have to think
about this as a low-hanging fruit anymore.
1. https://lore.kernel.org/git/20210512180517.GA11354@dcvr/
2.
$ perl -MBenchmark=:all -MCwd -wE 'cmpthese(10000, { getcwd => sub { getcwd }, cwd => sub { cwd }, pwd => sub { system "pwd >/dev/null" }})'
(warning: too few iterations for a reliable count)
Rate pwd cwd getcwd
pwd 982/s -- -48% -100%
cwd 1890/s 92% -- -100%
getcwd 10000000000000000000/s 1018000000000000000% 529000000000000064% -
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Optimize the time git-send-email takes to do even the simplest of
things (such as serving up "-h") from around ~150ms to ~80ms-~90ms by
lazily loading the modules it requires.
Before this change Devel::TraceUse would report 99/97 used modules
under NO_GETTEXT=[|Y], respectively. Now it's 52/37. It now takes ~15s
to run t9001-send-email.sh, down from ~20s.
Changing File::Spec::Functions::{catdir,catfile} to invoking class
methods on File::Spec itself is idiomatic. See [1] for a more
elaborate explanation, the resulting code behaves the same way, just
without the now-pointless function wrapper.
1. http://lore.kernel.org/git/8735u8mmj9.fsf@evledraar.gmail.com
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change indirect object syntax such as "new X ARGS" to
"X->new(ARGS)". This allows perl to see what "new" is at compile-time
without having loaded Term::ReadLine. This doesn't matter now, but
will in a subsequent commit when we start lazily loading it.
Let's do the same for the adjacent "FakeTerm" package for consistency,
even though we're not going to conditionally load it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change calls like "__ 'foo'" to "__('foo')" so the Perl compiler
doesn't have to guess that "__" is a function. This makes the code
more readable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Optimize git-send-email by only shelling out to "git var" if we need
to. This is easily done by re-inventing our own small version of
perl's Memoize module.
I suppose I could just use Memoize itself, but in a subsequent patch
I'll be micro-optimizing send-email's use of dependencies. Using
Memoize is a measly extra 5-10 milliseconds, but as we'll see that'll
end up mattering for us in the end.
This brings the runtime of a plain "send-email" from around ~160-170ms
to ~140m-150ms. The runtime of the tests is around the same, or around
~20s.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reduce the time it takes git-send-email to get to even the most
trivial of tasks (such as serving up its "-h" output) by first listing
config keys that exist, and only then only call e.g. "git config
--bool" on them if they do.
Over a lot of runs this speeds the time to "-h" up for me from ~250ms
to ~150ms, and the runtime of t9001-send-email.sh goes from ~25s to
~20s.
This introduces a race condition where we'll do the "wrong" thing if a
config key were to be inserted between us discovering the list and
calling read_config(), i.e. we won't know about the racily added
key. In theory this is a change in behavior, in practice it doesn't
matter.
The config_regexp() function being changed here was added in
dd84e528a34 (git-send-email: die if sendmail.* config is set,
2020-07-23) for use by git-send-email. So we can change its odd return
value in the case where no values are found by "git config". The
difference in the *.pm code would matter if it was invoked in scalar
context, but now it no longer is.
Arguably this caching belongs in Git.pm itself, but in lieu of
modifying it for all its callers let's only do this for "git
send-email". The other big potential win would be "git svn", but
unlike "git send-email" it doesn't check tens of config variables one
at a time at startup (in my brief testing it doesn't check any).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The config_regexp() function was added in dd84e528a3 (git-send-email:
die if sendmail.* config is set, 2020-07-23) for use in
git-send-email, and it's the only in-tree user of it.
However, the consensus is that Git.pm is a public interface, so even
though it's a recently added function we can't change it. So let's
copy over a minimal version of it to git-send-email.perl itself. In a
subsequent commit it'll be changed further for our own use.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With the removal of the support for sendemail.smtpssl in the preceding
commit the parsing of sendemail.smtpencryption is no longer special,
and can by moved to %config_settings.
This gets us rid of an unconditional call to Git::config(), which as
we'll see in subsequent commits matters for startup performance.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove the already dead code to support "sendemail.smtpssl" by finally
removing the dead code supporting the configuration option.
In f6bebd121ac (git-send-email: add support for TLS via
Net::SMTP::SSL, 2008-06-25) the --smtp-ssl command-line option was
documented as deprecated, later in 65180c66186 (List send-email config
options in config.txt., 2009-07-22) the "sendemail.smtpssl"
configuration option was also documented as such.
Then in in 3ff15040e22 (send-email: fix regression in
sendemail.identity parsing, 2019-05-17) I unintentionally removed
support for it by introducing a bug in read_config().
As can be seen from the diff context we've already returned unless
$enc i defined, so it's not possible for us to reach the "elsif"
branch here. This code was therefore already dead since Git v2.23.0.
So let's just remove it. We were already 11 years into a stated
deprecation period of this variable when 3ff15040e22 landed, now it's
around 13. Since it hasn't worked anyway for around 2 years it looks
like we can safely remove it.
The --smtp-ssl option is still deprecated, if someone cares they can
follow-up and remove that too, but unlike the config option that one
could still be in use in the wild. I'm just removing this code that's
provably unused already.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add support for the "GIT_TEST_PERL_FATAL_WARNINGS=true" test mode to
"send-email". This was added to e.g. git-svn in 5338ed2b26 (perl:
check for perl warnings while running tests, 2020-10-21), but not
"send-email". Let's rectify that.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code simplification.
* ab/send-email-inline-hooks-path:
send-email: move "hooks_path" invocation to git-send-email.perl
send-email: don't needlessly abs_path() the core.hooksPath
|
|
Move the newly added "hooks_path" API in Git.pm to its only user in
git-send-email.perl. This was added in c8243933c74 (git-send-email:
Respect core.hooksPath setting, 2021-03-23), meaning that it hasn't
yet made it into a non-rc release of git.
The consensus with Git.pm is that we need to be considerate of
out-of-tree users who treat it as a public documented interface. We
should therefore be less willing to add new functionality to it, least
we be stuck supporting it after our own uses for it disappear.
In this case the git-send-email.perl hook invocation will probably be
replaced by a future "git hook run" command, and in the commit
preceding this one the "hooks_path" become nothing but a trivial
wrapper for "rev-parse --git-path hooks" anyway (with no
Cwd::abs_path() call), so let's just inline this command in
git-send-email.perl itself.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix a regression with the "the editor exited uncleanly, aborting
everything" error message going missing after my
d21616c0394 (git-send-email: refactor duplicate $? checks into a
function, 2021-04-06).
I introduced a $msg variable, but did not actually use it. This caused
us to miss the optional error message supplied by the "do_edit"
codepath. Fix that, and add tests to check that this works.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
