merge changes from prusaslicer 2.3.2

also fix some values

1 files changed, 34 insertions, 20 deletions

diff --git a/FLSun.ini b/FLSun.ini
index 0be01a2..a0cbfd4 100644
--- a/FLSun.ini
+++ b/FLSun.ini
@@ -7,7 +7,7 @@
 name = FLSun

 # Configuration version of this file. Config file will only be installed, if the config_version differs.

 # This means, the server may force the PrusaSlicer configuration to be downgraded.

-config_version = 0.0.1

+config_version = 0.0.2-susi

 # Where to get the updates from?

 config_update_url = 

 #https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/FLSun/

@@ -44,7 +44,7 @@ avoid_crossing_perimeters_max_detour = 0
 bottom_solid_min_thickness = 0.5

 bridge_acceleration = 800

 bridge_angle = 0

-bridge_flow_ratio = 0.8

+bridge_flow_ratio = 80%

 bridge_speed = 30

 brim_width = 0

 clip_multipart_objects = 1

@@ -52,7 +52,7 @@ compatible_printers =
 complete_objects = 0

 default_acceleration = 800

 dont_support_bridges = 1

-elefant_foot_compensation = 0.2

+first_layer_size_compensation = -0.2

 ensure_vertical_shell_thickness = 1

 external_fill_pattern = rectilinear

 external_perimeters_first = 0

@@ -122,7 +122,9 @@ support_material_interface_extruder = 0
 support_material_angle = 0

 support_material_buildplate_only = 0

 support_material_enforce_layers = 0

-support_material_contact_distance = 0.2

+support_material_contact_distance_type = filament
+support_material_contact_distance_top = 0.2
+support_material_contact_distance_bottom = 0.2

 support_material_interface_contact_loops = 0

 support_material_interface_layers = 2

 support_material_interface_spacing = 0.2

@@ -171,7 +173,7 @@ perimeter_acceleration = 800
 

 [print:*0.6nozzleFLSUN*]

 bridge_acceleration = 1000

-bridge_flow_ratio = 0.95

+bridge_flow_ratio = 95%

 bridge_speed = 25

 default_acceleration = 1000

 external_perimeter_extrusion_width = 0.65

@@ -186,7 +188,9 @@ perimeter_acceleration = 800
 perimeter_extrusion_width = 0.65

 solid_infill_extrusion_width = 0.68

 support_material_speed = 40

-support_material_contact_distance = 0.15

+support_material_contact_distance_type = filament
+support_material_contact_distance_top = 0.15
+support_material_contact_distance_bottom = 0.15

 support_material_extrusion_width = 0.55

 support_material_xy_spacing = 80%

 top_infill_extrusion_width = 0.6

@@ -201,9 +205,11 @@ output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{filament_t
 [print:*0.08mm_flsunq*]

 inherits = *common_flsunq*

 bottom_solid_layers = 10

-bridge_flow_ratio = 0.7

+bridge_flow_ratio = 70%

 layer_height = 0.08

-support_material_contact_distance = 0.06

+support_material_contact_distance_type = filament
+support_material_contact_distance_top = 0.06
+support_material_contact_distance_bottom = 0.06

 support_material_spacing = 1.5

 top_solid_layers = 12

 

@@ -234,8 +240,8 @@ top_solid_infill_speed = 60%
 inherits = *common_flsunq*

 avoid_crossing_perimeters = 1

 bottom_solid_min_thickness = 0.5

-bridge_flow_ratio = 0.9

-elefant_foot_compensation = 0.15

+bridge_flow_ratio = 90%

+first_layer_size_compensation = -0.15

 ensure_vertical_shell_thickness = 1

 external_perimeter_extrusion_width = 0.9

 extra_perimeters = 1

@@ -294,9 +300,11 @@ solid_infill_speed = 80%
 [print:*0.16mm_flsunq*]

 inherits = *common_flsunq*

 bottom_solid_layers = 5

-bridge_flow_ratio = 0.9

+bridge_flow_ratio = 90%

 layer_height = 0.16

-support_material_contact_distance = 0.12

+support_material_contact_distance_type = filament
+support_material_contact_distance_top = 0.12
+support_material_contact_distance_bottom = 0.12

 top_solid_layers = 6

 

 [print:0.16mm QUALITY @FLSUN]

@@ -342,9 +350,11 @@ solid_infill_extrusion_width = 0.65
 [print:*0.20mm_flsunq*]

 inherits = *common_flsunq*

 bottom_solid_layers = 4

-bridge_flow_ratio = 0.95

+bridge_flow_ratio = 95%

 layer_height = 0.20

-support_material_contact_distance = 0.2

+support_material_contact_distance_type = filament
+support_material_contact_distance_top = 0.2
+support_material_contact_distance_bottom = 0.2

 top_solid_layers = 5

 

 [print:0.20mm QUALITY @FLSUN]

@@ -396,9 +406,11 @@ top_solid_infill_speed = 40%
 [print:*0.24mm_flsunq*]

 inherits = *common_flsunq*

 bottom_solid_layers = 4

-bridge_flow_ratio = 0.95

+bridge_flow_ratio = 95%

 layer_height = 0.24

-support_material_contact_distance = 0.18

+support_material_contact_distance_type = filament
+support_material_contact_distance_top = 0.18
+support_material_contact_distance_bottom = 0.18

 top_solid_layers = 4

 

 [print:0.24mm DRAFT @FLSUN]

@@ -419,14 +431,16 @@ top_solid_infill_speed = 50%
 [print:*0.30mm_flsunq*]

 inherits = *common_flsunq*

 bottom_solid_layers = 3

-bridge_flow_ratio = 0.95

+bridge_flow_ratio = 95%

 external_perimeter_extrusion_width = 0.6

 extrusion_width = 0.5

 infill_extrusion_width = 0.5

 layer_height = 0.30

 perimeter_extrusion_width = 0.5

 solid_infill_extrusion_width = 0.5

-support_material_contact_distance = 0.22

+support_material_contact_distance_type = filament
+support_material_contact_distance_top = 0.22
+support_material_contact_distance_bottom = 0.22

 top_infill_extrusion_width = 0.45

 top_solid_layers = 4

 

@@ -775,7 +789,7 @@ retract_length = 5
 retract_speed = 30

 retract_lift = 0.4

 silent_mode = 1

-start_gcode = ;STARTGCODE\nM117 Initializing\n; Set coordinate modes\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\n; Reset speed and extrusion rates\nM200 D0 ; disable volumetric E\nM220 S100 ; reset speed\n; Set initial warmup temps\nM117 Nozzle preheat\nM104 S100 ; preheat extruder to no ooze temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed final temp\nM300 S40 P10 ; Bip\n; Home\nM117 Homing\nG28 ; home all with default mesh bed level\n; For ABL users put G29 for a leveling request\n; Final warmup routine\nM117 Final warmup\nM104 S[first_layer_temperature] ; set extruder final temp\nM109 S[first_layer_temperature] ; wait for extruder final temp\nM190 S[first_layer_bed_temperature] ; wait for bed final temp\nM300 S440 P200     ; 1st beep for printer ready and allow some time to clean nozzle\nM300 S0 P250       ; wait between dual beep\nM300 S440 P200     ; 2nd beep for printer ready\nG4 S10             ; wait to clean the nozzle\nM300 S440 P200     ; 3rd beep for ready to start printing\n; Prime line routine\nM117 Printing prime line\n;M900 K0; Disable Linear Advance (Marlin) for prime line\nG92 E0.0; reset extrusion distance\nG1 X-54.672 Y-95.203 Z0.3 F4000; go outside print area\nG92 E0.0; reset extrusion distance\nG1 E2 F1000 ; de-retract and push ooze\nG3 X38.904 Y-102.668 I54.672 J95.105 E20.999\nG3 X54.671 Y-95.203 I-38.815 J102.373 E5.45800\nG92 E0.0\nG1 E-5 F3000 ; retract 5mm\nG1 X52.931 Y-96.185 F1000 ; wipe\nG1 X50.985 Y-97.231 F1000 ; wipe\nG1 X49.018 Y-98.238 F1000 ; wipe\nG1 X0 Y-109.798 F1000\nG1 E4.8 F1500; de-retract\nG92 E0.0 ; reset extrusion distance\n; Final print adjustments\nM117 Preparing to print\n;M82 ; extruder absolute mode\nM221 S{if layer_height<0.075}100{else}95{endif}\nM300 S40 P10 ; chirp\nM117 Print [input_filename]; Display: Printing started...

+start_gcode = ;STARTGCODE\nM117 Initializing\n; Set coordinate modes\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\n; Reset speed and extrusion rates\nM200 D0 ; disable volumetric E\nM220 S100 ; reset speed\n; Set initial warmup temps\nM117 Nozzle preheat\nM104 S100 ; preheat extruder to no ooze temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed final temp\nM300 S40 P10 ; Bip\n; Home\nM117 Homing\nG28 ; home all with default mesh bed level\n; For ABL users put G29 for a leveling request\n; Final warmup routine\nM117 Final warmup\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder final temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder final temp\nM190 S[first_layer_bed_temperature] ; wait for bed final temp\nM300 S440 P200     ; 1st beep for printer ready and allow some time to clean nozzle\nM300 S0 P250       ; wait between dual beep\nM300 S440 P200     ; 2nd beep for printer ready\nG4 S10             ; wait to clean the nozzle\nM300 S440 P200     ; 3rd beep for ready to start printing\n; Prime line routine\nM117 Printing prime line\n;M900 K0; Disable Linear Advance (Marlin) for prime line\nG92 E0.0; reset extrusion distance\nG1 X-54.672 Y-95.203 Z0.3 F4000; go outside print area\nG92 E0.0; reset extrusion distance\nG1 E2 F1000 ; de-retract and push ooze\nG3 X38.904 Y-102.668 I54.672 J95.105 E20.999\nG3 X54.671 Y-95.203 I-38.815 J102.373 E5.45800\nG92 E0.0\nG1 E-5 F3000 ; retract 5mm\nG1 X52.931 Y-96.185 F1000 ; wipe\nG1 X50.985 Y-97.231 F1000 ; wipe\nG1 X49.018 Y-98.238 F1000 ; wipe\nG1 X0 Y-109.798 F1000\nG1 E4.8 F1500; de-retract\nG92 E0.0 ; reset extrusion distance\n; Final print adjustments\nM117 Preparing to print\n;M82 ; extruder absolute mode\nM221 S{if layer_height<0.075}100{else}95{endif}\nM300 S40 P10 ; chirp\nM117 Print [input_filename]; Display: Printing started...

 thumbnails = 16x16,260x260

 use_relative_e_distances = 1

 use_volumetric_e = 0

@@ -819,7 +833,7 @@ printer_variant = 0.4
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_FLSun\nPRINTER_MODEL_Q5\nPRINTER_HAS_BOWDEN\n

 retract_length = 3

 retract_lift = 0.3

-start_gcode = ;STARTGCODE\nM117 Initializing\n; G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM107\nG28 ;Home\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\n\nG92 E0\nG1 X-98 Y0 Z0.2 F4000 ; move to arc start\nG3 X0 Y-98 I98 Z0.2 E40 F400 ; lay arc stripe 90deg\nG0 Z1 \nG92 E0.0\n

+start_gcode = ;STARTGCODE\nM117 Initializing\n; G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM107\nG28 ;Home\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\n\nG92 E0\nG1 X-98 Y0 Z0.2 F4000 ; move to arc start\nG3 X0 Y-98 I98 Z0.2 E40 F400 ; lay arc stripe 90deg\nG0 Z1 \nG92 E0.0\n

 thumbnails = 16x16,200x200

 use_relative_e_distances = 1

 use_volumetric_e = 0